ATF16LV8C-10PI - 10ns 8-Macrocell EE PLD | Microchip
MPN: ATF16LV8C-10PI ✗ סוף ייצורATF16LV8C-10PI סקירה
An EE PLD is a programmable logic device whose configuration is stored in nonvolatile memory. The ATF16LV8C combines that reprogrammable configuration with a simple, software-supported architecture based on the 16V8 and 20-pin combinatorial PLD families. Its eight outputs can implement logic functions of increasing complexity through three automatically selected operating modes, allowing a small programmable device to replace several gates, counters, decoders, or state machines.
The device provides a maximum pin-to-pin delay of 10 ns, making it appropriate for general-purpose control logic, decoding, address translation, interface adaptation, and fixed-format data processing. Its flash-memory configuration allows the programmed logic to be retained without continuous power. A pin-controlled power-down option can reduce supply current below 5 µA when the device is idle, while the pin-keeper circuits help preserve input states.
Each of the eight outputs is allocated eight product terms, and the architecture forms a superset of the generic 16R8 family and most 20-pin combinatorial PLD architectures. CMOS- and TTL-compatible inputs and outputs simplify integration with both modern and legacy digital logic. Software tools select the operating mode automatically from the programmed design, reducing manual configuration complexity.
Typical uses include industrial control, legacy peripheral emulation, programmable decode and decode-and-enable functions, simple state-machine implementation, and fixed logic consolidation in compact embedded systems. The ATF16LV8C is particularly useful when a design needs rapid field reprogrammability without replacing a discrete gate network.
For a new PCB, preserve the ATF16LV8C-10PI pin assignments and provide suitable supply decoupling and programming access. For an existing design, verify that the replacement has the same 20-pin PDIP footprint, voltage ratings, timing class, and configured power-down behavior. The 10 ns speed grade should be matched carefully against propagation requirements because slower and faster PLDs may require different timing budgets.
This product record combines the manufacturer specifications, a complete 20-pin connection view, application guidance, design checks, and package-compatible replacement analysis. It is intended to help engineers identify the correct ATF16LV8C-10PI for industrial programmable-logic designs and to evaluate drop-in options without overlooking timing, package, or lifecycle differences.
חלופות תחליף ישיר עבור ATF16LV8C-10PI — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם ATF16LV8C-10PI (אותו גורם צורה וטביעת רגל) — שונים ב Device Type, Maximum Pin-to-Pin Delay, Package, Temperature Grade.
ATF16LV8C-10PU
✅ Drop-In ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
ATF16LV8C-10PI דירוגים מרביים ומאפיינים חשמליים
| Device Type | EECMOS erasable programmable logic device (EE PLD) |
| Programmable Logic Architecture | 16V8 with 8 macrocells |
| Maximum Pin-to-Pin Delay | 10 ns |
| Macrocells | 8 |
| Outputs | 8 |
| Product Terms per Output | 8 |
| Configuration Memory Technology | Electrically erasable flash memory |
| Programmable Operating Modes | 3 modes selected automatically by software |
| Power-Down Supply Current | Less than 5 µA maximum |
| Typical Standby Current | 100 nA |
| Input Compatibility | CMOS and TTL compatible |
| Output Compatibility | CMOS and TTL compatible |
| מארז | 20-pin PDIP |
| מספר פינים | 20 pins |
| סגנון הרכבה | Through-hole |
| Temperature Grade | Industrial grade |
| Legacy Compatibility | Superset of generic 16R8 and most 20-pin combinatorial PLD architectures |
| Pin-Keeper Feature | Yes |
| Power-Down Control | Pin-controlled |
תצורת פינים של ATF16LV8C-10PI
| פין 1 | CLK — Clock input |
| פין 2 | I0 — Logic input 0 |
| פין 3 | I1 — Logic input 1 |
| פין 4 | PD — Power-down control or configurable logic input |
| פין 5 | I2 — Logic input 2 |
| פין 6 | I3 — Logic input 3 |
| פין 7 | I4 — Logic input 4 |
| פין 8 | I5 — Logic input 5 |
| פין 9 | GND — Ground connection |
| פין 10 | OE — Output enable input |
| פין 11 | O0 — Output 0 |
| פין 12 | O1 — Output 1 |
| פין 13 | O2 — Output 2 |
| פין 14 | O3 — Output 3 |
| פין 15 | O4 — Output 4 |
| פין 16 | O5 — Output 5 |
| פין 17 | O6 — Output 6 |
| פין 18 | O7 — Output 7 |
| פין 19 | VCC — Positive power supply |
| פין 20 | I6 — Logic input 6 |
יישומים טיפוסיים
ATF16LV8C-10PI מתאים עבור 6 יישוםs: Industrial Control and Automation, Programmable Address Decoding, Legacy Interface Adaptation, Compact State-Machine Logic, Instrumentation Signal Conditioning, Low-Power Embedded Logic.
Industrial Control and Automation
The ATF16LV8C-10PI is well suited to consolidating fixed control logic in industrial equipment because its eight macrocells and eight outputs can replace multiple gates, decoders, and small state machines. The 10 ns maximum pin-to-pin delay provides timing margin for common control paths, while electrically erasable flash memory permits logic revisions without replacing the device. Its industrial designation and 20-pin PDIP format also fit established through-hole automation boards. Confirm the device-specific supply limits and temperature range in the manufacturer datasheet before using it in a safety-critical or extended-temperature product.
מומלץ
Programmable Address Decoding
The ATF16LV8C-10PI can implement flexible address-decode and chip-enable logic where a board revision may require different device mappings. Eight outputs, each allocated eight product terms, provide enough structure for moderate Boolean functions, while three software-selected operating modes allow more complex decode patterns than a basic PAL arrangement. Its 10 ns speed class is useful for decoding paths that must respond quickly to system-selection signals. A design engineer should use the software-generated fit report and post-programming timing simulation to confirm every output and input assignment before releasing the board.
מומלץ
Legacy Interface Adaptation
ATF16LV8C-10PI is useful for adapting legacy bus signals, translating between incompatible logic conventions, or generating a small collection of control strobes. Eight macrocells can support combinational logic and state-machine behavior without requiring a microcontroller for simple protocol sequencing. The electrically erasable flash configuration allows the interface personality to be changed during production, test, or field maintenance. Because pin assignments depend on the selected operating mode, engineers must follow the configuration-generated pin report and verify signal timing against the 10 ns device rating before hardware release.
מומלץ
Compact State-Machine Logic
The ATF16LV8C-10PI can implement a compact finite-state machine when a design requires more conditional logic than a handful of gates but does not justify a microcontroller or FPGA. Its three operating modes support different combinations of registered and combinational behavior, and each of the eight outputs can contribute eight product terms to the implemented function. The 10 ns pin-to-pin delay supports conventional control-clock environments. Validate the state transitions exhaustively in simulation and test the programmed configuration after every firmware or logic update to avoid an unexpected system state.
מומלץ
Instrumentation Signal Conditioning
ATF16LV8C-10PI can implement digital gating, threshold comparison, status encoding, and control sequencing around analog measurement circuits. Its eight macrocells provide space for Boolean conditions and registered outputs, while the 10 ns speed rating keeps propagation delay short for control and trigger paths. Flash-based configuration makes it practical to update threshold or routing logic when an instrument family changes. Keep sensitive analog circuitry separate from the PLD, observe the device supply requirements, and use the manufacturer pin descriptions when assigning control signals around the measurement front end.
מומלץ
Low-Power Embedded Logic
The ATF16LV8C-10PI can reduce standby power in embedded equipment by placing its flash-programmable logic into a pin-controlled power-down state between active operations. Supply current falls below 5 µA in power-down mode, while typical standby current is 100 nA. This makes the device useful for low-duty-cycle controllers that still require retained configuration and rapid restart through the 10 ns logic path. Confirm whether pin 4 is assigned as the power-down control or another logic function in the final configuration, and validate the complete system current budget rather than relying on the device maximum alone.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור ATF16LV8C-10PI — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | ATF16LV8C-10PU |
|---|---|---|
| Package | 20-pin PDIP | 20-pin PDIP - same footprint |
| Brand | Microchip Technology | Microchip Technology |
| Device Type | EECMOS erasable programmable logic device | EECMOS erasable programmable logic device |
| Maximum Pin-to-Pin Delay | 10 ns | 10 ns |
| Macrocells | 8 | 8 |
| Outputs | 8 | 8 |
| Product Terms per Output | 8 | 8 |
| Configuration Memory | Electrically erasable flash memory | Electrically erasable flash memory |
| Power-Down Current | Less than 5 µA maximum | Less than 5 µA maximum |
| Temperature Designation | Industrial grade | Different temperature designation |
מבדילים עיקריים
- Direct 10 ns replacement path within the same family and package (לעומתATF16LV8C-10PU)
- Industrial-grade designation for extended industrial qualification (לעומתATF16LV8C-10PU)
- Low-power standby capability without losing programmed configuration (לעומתATF16LV8C-10SC)
הערות תכנון
Do not treat ATF16LV8C suffix variants as interchangeable merely because they share the ATF16LV8C family name. The 10PI target is a 10 ns industrial 20-pin PDIP device, whereas suffix combinations can change package, temperature grade, or speed. Validate the ordered suffix against the manufacturer ordering table, compare every PCB pin, and confirm the configured architecture before approving a substitution.
Use the pin-controlled power-down function only when pin 4 is assigned as the power-down control in the programmed configuration. When asserted, the device supply current falls below 5 µA according to the manufacturer datasheet. If pin 4 is assigned as a logic input, the low-power function is unavailable. Review the final fit report and system power budget to ensure the control polarity, idle state, and wake-up sequence are correct.
Preserve the 20-pin PDIP footprint, pin-1 orientation, and adequate spacing around the device for programming access and inspection. Place the device to minimize long logic-node traces and keep the supply and ground connections short. Because PLD pin functions depend on the selected operating mode, follow the configuration-generated pin report rather than relying on an unrelated PAL schematic when checking continuity.
Design timing margins around the 10 ns maximum pin-to-pin delay rather than treating it as a guaranteed average delay. Include setup, hold, clock skew, and output-loading effects in the system timing analysis. Use the manufacturer's timing definitions and worst-case operating conditions for the final grade, and simulate the compiled logic with realistic board delays before manufacturing.
מידע על תאימות
The ATF16LV8C-10PI is listed as an industrial-grade programmable logic device, but no explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations were identified. AEC-Q100 is not applicable to this non-automotive programmable logic device.