ATF16V8BQL-15JC - 15 ns 8-Macrocell PLD | Microchip
MPN: ATF16V8BQL-15JC ✓ NakahandaATF16V8BQL-15JC Ulas
An EEPLD is a semiconductor whose logic configuration is stored in nonvolatile, electrically erasable Flash memory. Within the programmable-logic hierarchy, the ATF16V8BQL belongs to the simple PLD family and can implement many common 20-pin PAL-compatible logic functions. Its electrically erasable configuration permits rapid design revisions without a dedicated ultraviolet erase cycle, while the 8-macrocell architecture provides more flexibility than a fixed PAL implementation.
The ATF16V8BQL combines a 15 ns maximum pin-to-pin delay with low-power operation. According to the manufacturer datasheet, the BQL version has typical standby current of 5 mA and automatically enters a low-power mode when the Input Transition Detection circuitry detects that the device is idle. This behavior makes it useful in systems where static power matters but the logic does not need continuous high-speed activity.
Three operating modes are selected automatically by development software, allowing the same device family to implement simple combinational logic, registered sequential logic, or more complex functions using the available macrocell resources. Each of the eight outputs can receive eight product terms. The device also emulates many 20-pin PAL architectures and is described as a superset capable of replacing much of the generic 16R8 and 20-pin combinatorial PLD landscape.
Typical uses include industrial control logic, interface decoding, counter and state-machine implementation, telecommunications infrastructure, and compact consumer or embedded control systems. The 20-pin PLCC package is surface mountable and suitable for prototype boards as well as production assemblies where a leaded carrier offers inspection and rework convenience.
Designers should verify the configured operating mode, pin assignments, and timing budget in the programming software before releasing a board. Decoupling capacitors should be placed close to the supply pins, and unused inputs should be tied to a defined logic level. The ATF16V8BQL's automatic standby feature can affect timing-sensitive paths if the input activity assumptions do not match the physical design.
This page combines manufacturer specifications, package and pin-architecture guidance, practical replacement criteria, and application-focused design notes to support faster PLD selection, schematic review, and PCB implementation.
Mga alternatibo na pwedeng ilagay na ATF16V8BQL-15JC — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok ATF16V8BQL-15JC (parehas na form factor at footprint) — pagkakaiba sa Package, Mounting Type, Device Type, I/O Count, Maximum Inputs.
ATF16V8B-15JC
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →ATF16V8B-15PC
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →ATF16V8B-15JU
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →ATF16V8BQ-15JC
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
GAL16V8D-15QJ
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
ATF16V8BQL-15JC Mga Pinakamataas na Rating at Electrical Characteristics
| Device Type | Electrically erasable programmable logic device (EEPLD) |
| Architecture | 16V8 with 8 macrocells |
| Maximum Pin-to-Pin Delay | 15 ns |
| Volte ng Pagbibigay | 5 V |
| Macrocell Count | 8 macrocells |
| Maximum Inputs | 16 inputs |
| I/O Count | 8 I/Os |
| Output Product Terms | 8 product terms per output |
| Configuration Technology | Electrically erasable Flash memory |
| Typical Standby Current | 5 mA |
| Power-Down Control | Automatic through Input Transition Detection (ITD) |
| Operating Modes | 3 automatic software-configured modes |
| Packhaging | 20-pin PLCC, 9 x 9 mm |
| Uri ng Pagpapasok | Surface mount, J-lead |
| Logic Family | CMOS |
| Programmable Architecture Compatibility | Many 20-pin PALs, 16R8 family, and most 20-pin combinatorial PLDs |
Gabay sa Pin Configuration ng ATF16V8BQL-15JC 20-pin plcc, 9 x 9 mm
Pin configuration para sa ATF16V8BQL-15JC (20-pin plcc, 9 x 9 mm package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa ATF16V8BQL-15JC.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
ATF16V8BQL-15JC ay nararapat para sa 6 aplikasyons: Industrial Control and Interlock Logic, Telecommunications Interface Decoding, Counter and State-Machine Control, Consumer and Appliance Control, Embedded Peripheral Interface Logic, Test and Measurement Control Logic.
Industrial Control and Interlock Logic
The ATF16V8BQL-15JC fits compact industrial control functions that combine input decoding, permissive interlocks, alarm logic, and output sequencing in a small 20-pin PLCC. Its 8 macrocells and eight product terms per output provide more logic density than a fixed simple PAL while remaining easier to deploy than a larger CPLD. The 15 ns pin-to-pin delay suits many control and bus-decoding paths, and the 5 mA typical standby current can benefit unattended equipment. Validate timing against the worst-case system path and confirm the exact temperature grade before using it in a high-temperature enclosure.
Inirekomenda
Telecommunications Interface Decoding
The ATF16V8BQL-15JC can implement protocol decoding, command qualification, framing, and peripheral-interface control in telecommunications equipment where a small deterministic logic block is preferable to a larger FPGA. Its 16V8 architecture supports up to 16 inputs and eight configurable I/Os, while 15 ns propagation delay supports many asynchronous control and handshake functions. Electrically erasable Flash configuration makes field-programmable logic updates straightforward during development. The designer must ensure that signal timing, I/O direction, output enable behavior, and supply tolerance satisfy the specific line-card interface.
Inirekomenda
Counter and State-Machine Control
The ATF16V8BQL-15JC is useful for compact counters, sequencers, and state machines that coordinate resets, timing windows, mode selection, and actuator commands. Three software-selected operating modes allow the same 8-macrocell device to implement registered or combinational logic without changing the package. The 15 ns delay class can support high-speed control sequences when the clock and asynchronous input requirements remain within the device timing limits. Program each mode and pin assignment through the supported development tools, then validate recovery and removal behavior against every asynchronous control input.
Inirekomenda
Consumer and Appliance Control
The ATF16V8BQL-15JC can consolidate appliance control logic for mode selection, timing, display sequencing, button decoding, and relay interlocks in a compact surface-mount design. Its nonvolatile Flash configuration permits design changes without removing the device, while the J-lead PLCC package supports reworkability and mechanical inspection. The BQL low-power variant is attractive in equipment that spends substantial time idle because Input Transition Detection can trigger automatic low-power operation. Ensure that every external signal remains within its I/O limits and that automatic standby does not disrupt a timing-sensitive state.
Inirekomenda
Embedded Peripheral Interface Logic
The ATF16V8BQL-15JC is appropriate for glue logic around microcontrollers, memory devices, sensors, and legacy peripherals where address decode, chip selection, command formatting, or interrupt qualification must be added. Sixteen input capacity and eight I/Os are sufficient for many asynchronous peripheral interfaces, and the 15 ns delay permits reasonably tight combinational decode paths. Place the device close to the interface signals, follow the manufacturer grounding and decoupling guidance, and avoid routing it through long unprotected traces. Programming-file portability should be checked if the original logic was designed for a different PLD vendor.
Inirekomenda
Test and Measurement Control Logic
The ATF16V8BQL-15JC can implement range selection, relay sequencing, status decoding, and timing-qualified control in compact instrumentation. Its three operating modes support both registered sequencing and combinational selection, and the electrically erasable configuration supports repeatable development of new test sequences. The 15 ns timing class is useful for control paths that must respond quickly, although instrument measurement accuracy still depends on the analog front end and precision components. Verify the power rails, input thresholds, output rise and fall times, and programmed pin roles during schematic review.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for ATF16V8BQL-15JC — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | ATF16V8B-15JC | ATF16V8B-15PC | ATF16V8B-15JU | ATF16V8BQ-15JC | GAL16V8D-15QJ |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Lattice Semiconductor |
| Package | 20-pin PLCC (9 x 9 mm) | 20-pin PLCC (9 x 9 mm) | 20-pin PLCC (9 x 9 mm) | 20-pin PLCC (9 x 9 mm) | 20-pin PLCC (9 x 9 mm) | 20-pin QPLCC |
| Device Architecture | 16V8 with 8 macrocells | 16V8 with 8 macrocells | 16V8 with 8 macrocells | 16V8 with 8 macrocells | 16V8 with 8 macrocells | 16V8-compatible architecture |
| Maximum Pin-to-Pin Delay | 15 ns | 15 ns | 15 ns | 15 ns | 15 ns | 15 ns class |
| Supply Voltage | 5 V | 5 V | 5 V | 5 V | 5 V | 5 V class |
| Programmable Architecture Compatibility | Many 20-pin PALs and most 20-pin combinatorial PLDs | Many 20-pin PALs and most 20-pin combinatorial PLDs | Many 20-pin PALs and most 20-pin combinatorial PLDs | Many 20-pin PALs and most 20-pin combinatorial PLDs | Many 20-pin PALs and most 20-pin combinatorial PLDs | 16V8-compatible GAL architecture |
Pangunahing mga Pagkakaiba
- Lower-power BQL implementation (kumpara saATF16V8B-15JC)
- Compact 8-macrocell logic density (kumpara saGAL16V8D-15QJ)
- Three configurable operating modes (kumpara saATF16V8BQ-15JC)
Talaan ng Disenyo
Place the required supply capacitors close to the ATF16V8BQL-15JC power and ground pins, using the manufacturer recommended capacitance and voltage rating. The BQL architecture can enter low-power mode through Input Transition Detection, so do not use apparent standby reduction to compensate for an inadequate active-state supply design. Review the power-up, power-down, and output-state requirements of every connected peripheral before enabling automatic standby.
Keep the 20-pin PLCC footprint, pad dimensions, and J-lead orientation consistent with the exact package drawing. Confirm pin 1 location against the PCB silkscreen and assembly orientation because no single generic PLCC drawing should be assumed for every vendor. Route clock, output-enable, and asynchronous control signals away from noisy power paths, while maintaining short ground returns to the device.
Do not treat the JC, PC, JU, BQ, and BQL suffixes as interchangeable without checking package, speed, temperature, and low-power differences. The BQL suffix is particularly important because it identifies 5 mA typical standby behavior and automatic ITD power-down. Also verify that the programmed I/O directions and registered or combinational mode match the schematic; a valid PLD package does not guarantee that a copied design file behaves identically on every architecture.
Use the slowest required timing mode and inspect asynchronous input and output-enable paths for transitions that could violate setup, hold, or recovery requirements. If the design relies on continuous high-speed activity, validate that the Input Transition Detection feature cannot enter an unexpected low-power state during sparse input patterns. Include worst-case propagation delay and output transition requirements in end-to-end interface timing calculations.
Programming-file portability requires review when moving from an ATF16V8B-family device to a GAL16V8D-family device. Match macrocell organization, pin names, polarity, output-enable semantics, and registered-output behavior rather than assuming that a 20-pin 16V8 package guarantees identical operation. Recompile and re-simulate the design with the final manufacturer's tools, then perform hardware tests across power-up, reset, and idle states.
Impormasyon ng Pagsunod sa Kautusan
The manufacturer material-compliance declaration for the exact ATF16V8BQL-15JC ordering code should be used for production qualification. This is a programmable logic IC and is not an automotive-qualified AEC-Q100 device based on the listed product information.