Microchip Technology

ATF16V8BQL-15JC - 15 ns 8-Macrocell PLD | Microchip

MPN: ATF16V8BQL-15JC ✓ فعال
5 V Vdss 5 mA Id 20-pin PLCC, 9 x 9 mm Package
حداقل سفارش: 1 |

ATF16V8BQL-15JC نمای کلی

The Microchip ATF16V8BQL-15JC is a 5 V, 8-macrocell electrically erasable programmable logic device (EEPLD) with a maximum pin-to-pin delay of 15 ns, packaged in a 20-pin PLCC with J-leads. It supports up to 16 inputs, 8 configurable I/O outputs and eight outputs allocated eight product terms, making it a compact implementation of moderately complex combinational or registered control logic.

An EEPLD is a semiconductor whose logic configuration is stored in nonvolatile, electrically erasable Flash memory. Within the programmable-logic hierarchy, the ATF16V8BQL belongs to the simple PLD family and can implement many common 20-pin PAL-compatible logic functions. Its electrically erasable configuration permits rapid design revisions without a dedicated ultraviolet erase cycle, while the 8-macrocell architecture provides more flexibility than a fixed PAL implementation.

The ATF16V8BQL combines a 15 ns maximum pin-to-pin delay with low-power operation. According to the manufacturer datasheet, the BQL version has typical standby current of 5 mA and automatically enters a low-power mode when the Input Transition Detection circuitry detects that the device is idle. This behavior makes it useful in systems where static power matters but the logic does not need continuous high-speed activity.

Three operating modes are selected automatically by development software, allowing the same device family to implement simple combinational logic, registered sequential logic, or more complex functions using the available macrocell resources. Each of the eight outputs can receive eight product terms. The device also emulates many 20-pin PAL architectures and is described as a superset capable of replacing much of the generic 16R8 and 20-pin combinatorial PLD landscape.

Typical uses include industrial control logic, interface decoding, counter and state-machine implementation, telecommunications infrastructure, and compact consumer or embedded control systems. The 20-pin PLCC package is surface mountable and suitable for prototype boards as well as production assemblies where a leaded carrier offers inspection and rework convenience.

Designers should verify the configured operating mode, pin assignments, and timing budget in the programming software before releasing a board. Decoupling capacitors should be placed close to the supply pins, and unused inputs should be tied to a defined logic level. The ATF16V8BQL's automatic standby feature can affect timing-sensitive paths if the input activity assumptions do not match the physical design.

This page combines manufacturer specifications, package and pin-architecture guidance, practical replacement criteria, and application-focused design notes to support faster PLD selection, schematic review, and PCB implementation.

جایگزین‌های drop-in برای ATF16V8BQL-15JC — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

گونه‌ها در این سری

مدل‌های هم‌سری که جایگزین مستقیم هستند برای ATF16V8BQL-15JC (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Package, Mounting Type, Device Type, I/O Count, Maximum Inputs.

Microchip Technology
Package: 20-pin PLCC (9x9 mm)
Mounting Type: Surface mount
I/O Count: Up to 8 I/Os
مقایسه با ATF16V8BQL-15JC →
Microchip Technology
Package: 20-pin ceramic PLCC, 9 mm x 9 mm
Mounting Type: Surface mount
Device Type: Electrically erasable simple programmable logic device (SPLD)
مقایسه با ATF16V8BQL-15JC →
Microchip Technology
Package: 20-pin PDIP
Mounting Type: Through-hole
Maximum Inputs: Up to 16 inputs
مقایسه با ATF16V8BQL-15JC →

ATF16V8B-15JC

✅ جایگزین مستقیم
Microchip Technology
📦 20-pin PLCC (9 x 9 mm)
Electrically erasable programmable logic device (EEPLD) · 16V8 SPLD architecture with 8 macrocells · 15 ns · 250 gates · 8 macrocells · Up to 16 inputs · Up to 8 I/Os · 5 V

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

ATF16V8B-15PC

✅ جایگزین مستقیم
Microchip Technology
📦 20-pin PLCC (9 x 9 mm)
Electrically erasable programmable logic device (EEPLD) · 250 gates · Up to 16 inputs · 8 I/Os · 8 macrocells · 15 ns · 7.5 ns · 5 V

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

ATF16V8B-15JU

✅ جایگزین مستقیم
Microchip Technology
📦 20-pin PLCC (9 x 9 mm)
Electrically erasable simple programmable logic device (SPLD) · 5 V · 15 ns · 62 MHz · 250 gates · 8 macrocells · 16 inputs · 8 I/O pins

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

ATF16V8BQ-15JC

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
📦 20-pin PLCC (9 x 9 mm)
Same 15 ns, 8-macrocell 16V8 architecture and 20-pin PLCC package; the BQ version consumes more standby current than the BQL version's 5 mA typical value.

📋 جایگزین مرجع (خارج از کاتالوگ)

GAL16V8D-15QJ

✅ جایگزین مستقیم
📦 20-pin QPLCC
Matches the 16V8-compatible 15 ns class and 20-pin leaded-package format; manufacturer-specific I/O behavior, power characteristics, and qualification must be verified before substitution.

📋 جایگزین مرجع (خارج از کاتالوگ)

ATF16V8BQL-15JC حداکثر مقادیر مجاز و مشخصات الکتریکی

Device Type Electrically erasable programmable logic device (EEPLD)
Architecture 16V8 with 8 macrocells
Maximum Pin-to-Pin Delay 15 ns
ولتاژ تغذیه 5 V
Macrocell Count 8 macrocells
Maximum Inputs 16 inputs
I/O Count 8 I/Os
Output Product Terms 8 product terms per output
Configuration Technology Electrically erasable Flash memory
Typical Standby Current 5 mA
Power-Down Control Automatic through Input Transition Detection (ITD)
Operating Modes 3 automatic software-configured modes
بسته‌بندی 20-pin PLCC, 9 x 9 mm
نوع نصب Surface mount, J-lead
Logic Family CMOS
Programmable Architecture Compatibility Many 20-pin PALs, 16R8 family, and most 20-pin combinatorial PLDs

راهنمای پیکربندی پین ATF16V8BQL-15JC 20-pin plcc, 9 x 9 mm

پیکربندی پین برای ATF16V8BQL-15JC (پکیج 20-pin plcc, 9 x 9 mm). این IC دیجیتال شامل GPIO، رابط‌های ارتباطی (UART، SPI، I2C) و پین‌های تغذیه است. برای عملکردهای جایگزین پین و گزینه‌های پیکربندی به دیتاشیت سازنده مراجعه کنید. ضروری برای طراحی سیستم‌های نهفته و چیدمان PCB.

نمودار پین‌آوت پکیج 20-pin plcc, 9 x 9 mm برای ATF16V8BQL-15JC

داده پین‌آوت تفصیلی موجود نیست برای ATF16V8BQL-15JC.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

ATF16V8BQL-15JC مناسب است برای 6 کاربردs: Industrial Control and Interlock Logic, Telecommunications Interface Decoding, Counter and State-Machine Control, Consumer and Appliance Control, Embedded Peripheral Interface Logic, Test and Measurement Control Logic.

🏭

Industrial Control and Interlock Logic

The ATF16V8BQL-15JC fits compact industrial control functions that combine input decoding, permissive interlocks, alarm logic, and output sequencing in a small 20-pin PLCC. Its 8 macrocells and eight product terms per output provide more logic density than a fixed simple PAL while remaining easier to deploy than a larger CPLD. The 15 ns pin-to-pin delay suits many control and bus-decoding paths, and the 5 mA typical standby current can benefit unattended equipment. Validate timing against the worst-case system path and confirm the exact temperature grade before using it in a high-temperature enclosure.

🌐

Telecommunications Interface Decoding

The ATF16V8BQL-15JC can implement protocol decoding, command qualification, framing, and peripheral-interface control in telecommunications equipment where a small deterministic logic block is preferable to a larger FPGA. Its 16V8 architecture supports up to 16 inputs and eight configurable I/Os, while 15 ns propagation delay supports many asynchronous control and handshake functions. Electrically erasable Flash configuration makes field-programmable logic updates straightforward during development. The designer must ensure that signal timing, I/O direction, output enable behavior, and supply tolerance satisfy the specific line-card interface.

⚡

Counter and State-Machine Control

The ATF16V8BQL-15JC is useful for compact counters, sequencers, and state machines that coordinate resets, timing windows, mode selection, and actuator commands. Three software-selected operating modes allow the same 8-macrocell device to implement registered or combinational logic without changing the package. The 15 ns delay class can support high-speed control sequences when the clock and asynchronous input requirements remain within the device timing limits. Program each mode and pin assignment through the supported development tools, then validate recovery and removal behavior against every asynchronous control input.

🔧

Consumer and Appliance Control

The ATF16V8BQL-15JC can consolidate appliance control logic for mode selection, timing, display sequencing, button decoding, and relay interlocks in a compact surface-mount design. Its nonvolatile Flash configuration permits design changes without removing the device, while the J-lead PLCC package supports reworkability and mechanical inspection. The BQL low-power variant is attractive in equipment that spends substantial time idle because Input Transition Detection can trigger automatic low-power operation. Ensure that every external signal remains within its I/O limits and that automatic standby does not disrupt a timing-sensitive state.

🖥️

Embedded Peripheral Interface Logic

The ATF16V8BQL-15JC is appropriate for glue logic around microcontrollers, memory devices, sensors, and legacy peripherals where address decode, chip selection, command formatting, or interrupt qualification must be added. Sixteen input capacity and eight I/Os are sufficient for many asynchronous peripheral interfaces, and the 15 ns delay permits reasonably tight combinational decode paths. Place the device close to the interface signals, follow the manufacturer grounding and decoupling guidance, and avoid routing it through long unprotected traces. Programming-file portability should be checked if the original logic was designed for a different PLD vendor.

📺

Test and Measurement Control Logic

The ATF16V8BQL-15JC can implement range selection, relay sequencing, status decoding, and timing-qualified control in compact instrumentation. Its three operating modes support both registered sequencing and combinational selection, and the electrically erasable configuration supports repeatable development of new test sequences. The 15 ns timing class is useful for control paths that must respond quickly, although instrument measurement accuracy still depends on the analog front end and precision components. Verify the power rails, input thresholds, output rise and fall times, and programmed pin roles during schematic review.

What is the ATF16V8BQL-15JC?
The ATF16V8BQL-15JC is a Microchip 5 V electrically erasable programmable logic device with 8 macrocells, up to 16 inputs, 8 I/Os, and a maximum pin-to-pin delay of 15 ns. According to the manufacturer datasheet, it stores its configuration in electrically erasable Flash memory and is packaged in a 20-pin J-lead PLCC. The device is intended for compact combinational and registered logic implementations where nonvolatile configuration, moderate speed, and low standby consumption are important.
What are the key specifications of ATF16V8BQL-15JC that engineers should know?
The principal ATF16V8BQL-15JC specifications are an 8-macrocell 16V8 architecture, 5 V supply, 15 ns maximum pin-to-pin delay, 16 maximum inputs, and 8 configurable I/Os. The manufacturer datasheet also identifies 8 product terms per output and typical standby current of 5 mA. Three operating modes are configured automatically by software, allowing combinational, registered, and more complex logic configurations without changing the physical device.
Where can I download the ATF16V8BQL-15JC datasheet PDF?
The official ATF16V8BQL-15JC datasheet PDF is available from Microchip's product-document server and covers the ATF16V8B, ATF16V8BQ, and ATF16V8BQL families. Use that document for the device architecture, operating modes, electrical characteristics, package drawing, and programming information. The manufacturer part page for ATF16V8BQL is also the appropriate starting point for current product information and supporting design resources.
Where can I find the ATF16V8BQL-15JC pinout?
The ATF16V8BQL-15JC pinout is found in the pin-configuration section and package drawing of the manufacturer datasheet. The device uses a 20-pin J-lead PLCC, so designers should verify every signal assignment against the exact package drawing rather than relying on a generic 16V8 diagram. The programmed pin roles must also be checked in the design software because the same physical input or I/O pin can be assigned to different logical functions according to the selected configuration.
Is the ATF16V8BQL-15JC the same as an ATF16V8B-15JC?
The ATF16V8BQL-15JC and ATF16V8B-15JC share the 16V8 architecture, 8-macrocell count, 15 ns speed grade, and 20-pin PLCC format, but the BQL designation identifies the lower-power variant. The manufacturer datasheet identifies typical standby current of 5 mA for the BQL version and automatic low-power entry through Input Transition Detection. For a board already designed around ATF16V8BQL, confirm the original device temperature grade and verify every electrical limit before substituting.
What can replace the ATF16V8BQL-15JC?
The closest replacements are 15 ns, 20-pin PLCC devices with the same 16V8 macrocell architecture and compatible pin assignments, such as ATF16V8B-15JC and ATF16V8B-15PC. ATF16V8BQ-15JC is another same-brand possibility with a higher-power architecture, while GAL16V8D-15QJ may suit designs based on a compatible GAL16V8D footprint. A replacement should be checked for macrocell organization, input and I/O pinout, registered-output behavior, supply limits, and active-state timing.
Is the ATF16V8BQL-15JC suitable for industrial control systems?
The ATF16V8BQL-15JC is suitable for many industrial control functions when its electrical ratings and temperature grade match the installation environment. Its electrically erasable Flash configuration supports firmware-like logic updates, while the 15 ns delay is suitable for many control, decoding, and sequencing functions. The 8-macrocell resource limit makes it more appropriate for compact fixed logic than for large state machines, and the complete design should be checked against the manufacturer timing and power specifications.
What is the difference between ATF16V8BQL and ATF16V8B?
The primary difference is the low-power implementation represented by BQL. According to the manufacturer datasheet, ATF16V8BQL has typical standby current of 5 mA and automatically powers down into a low-power mode through Input Transition Detection when idle. The basic ATF16V8B family provides the same 8-macrocell, 16V8 logic architecture and three software-selected operating modes. The exact package, speed, and temperature suffix must still match when making a physical replacement.
When should I choose ATF16V8BQL-15JC over ATF16V8B-15JC?
Choose ATF16V8BQL-15JC when low standby consumption and automatic idle power-down are more important than the higher standby current of the standard ATF16V8B implementation. Choose ATF16V8B-15JC when the design does not benefit from Input Transition Detection power saving or when qualification, sourcing, or exact device-history requirements favor the standard family member. Both use the 15 ns speed grade in the cited 20-pin PLCC configuration, so timing should be reviewed with the final programmed design.
What is the best Lattice equivalent for ATF16V8BQL-15JC?
The GAL16V8D-15QJ is the relevant Lattice comparison candidate because it belongs to the 16V8-compatible GAL architecture and is associated with a 15 ns speed grade and QPLCC package designation in the replacement comparison. It is not an automatic substitution: confirm the physical footprint, pin functions, registered-output modes, supply voltage, power behavior, and programming-file compatibility. The candidate should therefore be treated as a cross-reference requiring schematic and timing review, not as an unconditional drop-in decision.
How much power does the ATF16V8BQL-15JC use in standby?
The ATF16V8BQL-15JC has a typical standby current of 5 mA, according to the manufacturer datasheet. Its Input Transition Detection circuitry allows automatic entry into the low-power mode when the device is idle. Actual board consumption depends on the supply voltage, device state, output loading, and switching activity, so use the datasheet current specifications for worst-case design calculations rather than relying on a single typical figure.
Where can I buy ATF16V8BQL-15JC online?
Use the Request a Quote form on this page to request ATF16V8BQL-15JC availability, packaging, lead time, and a formal quotation. The request should identify the exact MPN ATF16V8BQL-15JC and the required 20-pin PLCC package. This avoids ambiguity with ATF16V8BQ, ATF16V8BQL, or other speed, temperature, and package suffixes that use closely related ordering codes.
What is the price of ATF16V8BQL-15JC?
Submit ATF16V8BQL-15JC through the Request a Quote form on this page for the current unit price, quantity discounts, and order confirmation. Quote handling allows the response to account for the exact MPN, 20-pin PLCC package, required quantity, and current inventory without inserting a stale figure into technical content. For engineering records, retain the quotation date alongside the supplier response.
What is the lead time for ATF16V8BQL-15JC?
Request the current lead time and minimum order quantity through the Request a Quote form on this page. Lead time can vary with the exact package suffix, production inventory, order quantity, and shipping destination, so it should be confirmed for the complete order rather than inferred from generic listing status. Include the target ship date in the request when the device is supporting a production or prototype schedule.
Is ATF16V8BQL-15JC in stock?
Use the Request a Quote form on this page to check current availability and allocation for ATF16V8BQL-15JC. Inventory status changes by package, quantity, and region, so an unconfirmed listing should not be treated as a stock guarantee. The quotation response can include available quantity, manufacturing or allocation status, and the expected fulfillment plan for the exact 20-pin PLCC ordering code.
Is ATF16V8BQL-15JC compliant with RoHS and REACH?
Use the exact ATF16V8BQL-15JC material-compliance declaration from Microchip or the authorized supply chain for formal production qualification. RoHS and REACH status can be affected by package, date code, and sales region, so the specific ordering code should be checked rather than inferred from the family name. XAIPART can provide the current documentation through the Request a Quote process for the requested lot and date-code range.
Can ATF16V8BQL-15JC replace a GAL16V8D in an existing design?
The ATF16V8BQL-15JC can be considered for a GAL16V8D design only after the physical pinout, macrocell organization, I/O behavior, and programming implementation have been verified. Its 16V8 architecture and 20-pin PLCC format make it a logical cross-reference, but the GAL16V8D-15QJ still requires a package-level and timing-level review. Check every powered and I/O pin, the registered versus combinational mode, output enable behavior, and the vendor programming toolchain before replacing the installed device.

داده‌های مرجع مهندسی برای ATF16V8BQL-15JC — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose ATF16V8BQL-15JC when the design needs a compact 20-pin PLCC EEPLD with eight macrocells, 15 ns propagation delay, and low standby consumption. Its automatic Input Transition Detection power-down is particularly useful in equipment that spends significant time idle. Choose ATF16V8B-15JC when the standard ATF16V8B architecture and sourcing history are preferable and the lower-power BQL behavior is unnecessary. ATF16V8B-15PC and ATF16V8B-15JU can suit designs requiring different ordering or qualification codes, but their temperature, package, and power details must be matched. ATF16V8BQ-15JC offers the same broad 16V8 and 15 ns positioning but has higher standby consumption. Consider GAL16V8D-15QJ only after confirming the GAL pinout, I/O behavior, timing, programming support, and qualification. For every option, perform a final schematic and timing review rather than relying on the 20-pin package alone.

مقایسه با جایگزین‌ها

پارامتر این محصول ATF16V8B-15JC ATF16V8B-15PC ATF16V8B-15JU ATF16V8BQ-15JC GAL16V8D-15QJ
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Lattice Semiconductor
Package 20-pin PLCC (9 x 9 mm) 20-pin PLCC (9 x 9 mm) 20-pin PLCC (9 x 9 mm) 20-pin PLCC (9 x 9 mm) 20-pin PLCC (9 x 9 mm) 20-pin QPLCC
Device Architecture 16V8 with 8 macrocells 16V8 with 8 macrocells 16V8 with 8 macrocells 16V8 with 8 macrocells 16V8 with 8 macrocells 16V8-compatible architecture
Maximum Pin-to-Pin Delay 15 ns 15 ns 15 ns 15 ns 15 ns 15 ns class
Supply Voltage 5 V 5 V 5 V 5 V 5 V 5 V class
Programmable Architecture Compatibility Many 20-pin PALs and most 20-pin combinatorial PLDs Many 20-pin PALs and most 20-pin combinatorial PLDs Many 20-pin PALs and most 20-pin combinatorial PLDs Many 20-pin PALs and most 20-pin combinatorial PLDs Many 20-pin PALs and most 20-pin combinatorial PLDs 16V8-compatible GAL architecture

تفاوت‌های کلیدی

  • Lower-power BQL implementation (در مقابلATF16V8B-15JC)
  • Compact 8-macrocell logic density (در مقابلGAL16V8D-15QJ)
  • Three configurable operating modes (در مقابلATF16V8BQ-15JC)

یادداشت‌های طراحی

Place the required supply capacitors close to the ATF16V8BQL-15JC power and ground pins, using the manufacturer recommended capacitance and voltage rating. The BQL architecture can enter low-power mode through Input Transition Detection, so do not use apparent standby reduction to compensate for an inadequate active-state supply design. Review the power-up, power-down, and output-state requirements of every connected peripheral before enabling automatic standby.

Keep the 20-pin PLCC footprint, pad dimensions, and J-lead orientation consistent with the exact package drawing. Confirm pin 1 location against the PCB silkscreen and assembly orientation because no single generic PLCC drawing should be assumed for every vendor. Route clock, output-enable, and asynchronous control signals away from noisy power paths, while maintaining short ground returns to the device.

Do not treat the JC, PC, JU, BQ, and BQL suffixes as interchangeable without checking package, speed, temperature, and low-power differences. The BQL suffix is particularly important because it identifies 5 mA typical standby behavior and automatic ITD power-down. Also verify that the programmed I/O directions and registered or combinational mode match the schematic; a valid PLD package does not guarantee that a copied design file behaves identically on every architecture.

Use the slowest required timing mode and inspect asynchronous input and output-enable paths for transitions that could violate setup, hold, or recovery requirements. If the design relies on continuous high-speed activity, validate that the Input Transition Detection feature cannot enter an unexpected low-power state during sparse input patterns. Include worst-case propagation delay and output transition requirements in end-to-end interface timing calculations.

Programming-file portability requires review when moving from an ATF16V8B-family device to a GAL16V8D-family device. Match macrocell organization, pin names, polarity, output-enable semantics, and registered-output behavior rather than assuming that a 20-pin 16V8 package guarantees identical operation. Recompile and re-simulate the design with the final manufacturer's tools, then perform hardware tests across power-up, reset, and idle states.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

The manufacturer material-compliance declaration for the exact ATF16V8BQL-15JC ordering code should be used for production qualification. This is a programmable logic IC and is not an automotive-qualified AEC-Q100 device based on the listed product information.

تاریخ تأیید داده‌ها: 2026-11-11 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

atf16v8bql datasheet atf16v8bql 15pu datasheet atmel atf16v8bql ATF16V8BQL-15JC datasheet ATF16V8BQL-15JC datasheet pdf ATF16V8BQL-15JC pinout ATF16V8BQL-15JC equivalent ATF16V8BQL-15JC replacement ATF16V8BQL-15JC 20 PLCC ATF16V8BQL-15JC 15 ns ATF16V8BQL-15JC price ATF16V8BQL-15JC stock ATF16V8BQL-15JC vs ATF16V8B-15JC ATF16V8BQL-15JC industrial control

قطعات و اصطلاحات مرتبط

Microchip Technology Atmel ATF16V8BQL-15JC ATF16V8BQL ATF16V8B-15JC ATF16V8B-15PC ATF16V8B-15JU ATF16V8BQ-15JC GAL16V8D-15QJ electrically erasable programmable logic device EEPLD simple programmable logic device SPLD PAL-compatible architecture 16V8 architecture macrocell product term Input Transition Detection ITD electrically erasable Flash memory CMOS PLCC-20 J-lead package surface mount low-power mode
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ