ATF22V10CQZ-20JU - 20 ns EEPLD, 10 Macrocells | Microchip
MPN: ATF22V10CQZ-20JU ✓ NakahandaATF22V10CQZ-20JU Ulas
A simple programmable logic device, or SPLD, is a semiconductor that combines a fixed internal logic structure with user-programmable connections. Within the broader programmable-logic hierarchy, an SPLD sits below more complex CPLD and FPGA devices. It is useful when a design needs combinational or registered Boolean logic, but a full FPGA would add unnecessary cost, power, and programming complexity. The ATF22V10CQZ family implements this role using electrically erasable CMOS flash memory.
The ATF22V10CQZ-20JU provides a nominal 20 ns speed grade, 10 macrocells, 28 I/O pins, and 10 registers. The wider ATF22V10CQZ family also supports speeds down to 12 ns and specifies zero standby power dissipation. Its electrically erasable architecture permits the stored logic configuration to be reprogrammed, making the device suitable for prototype refinement, production control logic, interface conditioning, and legacy equipment maintenance.
The ATF22V10C family is based on electrically erasable flash technology rather than a one-time-programmable fuse array. This distinction allows design changes without replacing the device. Its 10 registers support registered logic operations, while the 10 macrocells provide the configurable Boolean building blocks used to implement product-term equations, state-machine decoding, and control sequences.
Typical uses include industrial control logic, printer and copier sequencing, peripheral-interface decoding, data-routing networks, and replacement of GAL22V10-family logic in existing equipment. Its 28-PLCC package supports through-hole assembly and inspection, which is advantageous for legacy industrial and telecommunications platforms that were not designed around fine-pitch surface-mount packages.
For a new design, verify every pin against the manufacturer pin-description table and confirm the programmed fuse map before production release. Use the manufacturer’s development programming environment and an equivalent device for functional simulation, and review timing assumptions at the system clock frequency before using this 20 ns grade in a demanding synchronous path.
This page consolidates the device specifications, verified drop-in alternatives, package considerations, and practical replacement guidance into an engineering-focused selection reference. It also distinguishes speed-grade, package, and architecture differences that must be checked before treating a similarly named ATF22V10C device as an interchangeable replacement.
Mga alternatibo na pwedeng ilagay na ATF22V10CQZ-20JU — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok ATF22V10CQZ-20JU (parehas na form factor at footprint) — pagkakaiba sa Device Type, Package, Mounting Type, Programmable Technology.
ATF22V10CQZ-20JI
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →ATF22V10CQZ-15JU
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
ATF22V10CQZ-10JU
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
ATF22V10CZ-20JU
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
ATF22LV10CQZ-20JU
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
ATF22V10CQZ-20JU Mga Pinakamataas na Rating at Electrical Characteristics
| Device Type | Simple programmable logic device (SPLD) |
| Programmable Technology | Electrically erasable CMOS flash memory |
| Speed Grade | 20 ns |
| Macrocells | 10 macrocells |
| User I/O Pins | 28 I/O pins |
| Registers | 10 registers |
| Equivalent Logic Capacity | 500 gates |
| Maximum Frequency | 50 MHz |
| Volte ng Pagbibigay | 5 V |
| Family Speed Capability | Speeds down to 12 ns |
| Standby Power Dissipation | 0 W |
| Packhaging | 28-PLCC (11.51 mm x 11.51 mm) |
| Uri ng Pagpapasok | Through-hole surface-mount-compatible PLCC |
| Logic Family | CMOS |
| Programming Method | Electrically erasable flash programming |
Gabay sa Pin Configuration ng ATF22V10CQZ-20JU 28-plcc (11.51 mm x 11.51 mm)
Pin configuration para sa ATF22V10CQZ-20JU (28-plcc (11.51 mm x 11.51 mm) package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa ATF22V10CQZ-20JU.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
ATF22V10CQZ-20JU ay nararapat para sa 6 aplikasyons: Industrial Control Sequencing, Printer and Copier Control, Peripheral Interface Decoding, Telecommunications Status Logic, Data Routing and Address Decode, Legacy Equipment Maintenance.
Industrial Control Sequencing
The ATF22V10CQZ-20JU fits compact industrial control logic because its 10 macrocells and 10 registers can implement state-machine decoding, command sequencing, and latch-based interlocks in a 28-PLCC package. The 20 ns speed grade provides a defined timing class for moderate clock rates, while electrically erasable flash permits design revisions without replacing the programmed device. A legacy machine controller can place the PLCC directly on a through-hole logic board, reducing the need for a larger FPGA. Before installation, confirm the supply voltage, environmental limits, and programmed fuse map against the manufacturer documentation.
Inirekomenda
Printer and Copier Control
The ATF22V10CQZ-20JU is appropriate for printer, copier, and office-equipment sequencing blocks that combine input decoding with registered control outputs. Its 10 macrocells can divide the implementation among product-term equations and state transitions, while the 10 registers support timing-sensitive output sequencing. The electrically erasable configuration is particularly useful during production testing because firmware or logic-map corrections can be made without another specialized fuse-programming method. The 28-PLCC footprint fits established equipment-control boards, but the exact I/O assignments and timing must be copied from the manufacturer pin table rather than inferred from another ATF22V10C variant.
Inirekomenda
Peripheral Interface Decoding
The ATF22V10CQZ-20JU can serve as an interface decoder between older system logic and a programmable peripheral. Ten macrocells are sufficient for address qualification, command translation, chip-select generation, and status-line arbitration in many legacy designs, while the device’s 28 I/O pins provide flexible routing. Its 20 ns propagation-delay class must be included in the peripheral timing budget, particularly for handshake signals or address decode paths operating near the system clock limit. Electrically erasable flash makes it useful for field-serviceable equipment where interface revisions are expected after initial deployment.
Inirekomenda
Telecommunications Status Logic
The ATF22V10CQZ-20JU is suitable for telecommunications equipment that uses dedicated programmable logic to qualify alarms, route status signals, or implement backplane timing functions. Its 10 registers can hold state across clock boundaries, and its macrocell architecture supports Boolean equations common in legacy line-card designs. The through-hole 28-PLCC package is advantageous for repairable platforms with plated-through-hole boards and socketed logic devices. The zero standby-power family rating also benefits continuously energized equipment. Nevertheless, the complete operating-temperature grade, supply tolerances, and timing limits should be confirmed for the intended rack environment before field deployment.
Inirekomenda
Data Routing and Address Decode
The ATF22V10CQZ-20JU can implement address decoders, data selectors, and fixed routing networks where a full programmable-logic array would be excessive. Its 10 macrocells provide enough product-term logic for many small decoders, and the 28-pin package offers more routing options than a narrow logic IC. The 20 ns timing grade must be compared with the slowest address or select signal in the system; the faster ATF22V10CQZ alternatives add margin when timing closure is difficult. Because the programmed fuse map determines behavior, validate the design with a simulation and an equivalent device before releasing it to production.
Inirekomenda
Legacy Equipment Maintenance
The ATF22V10CQZ-20JU is valuable for maintaining older industrial, office, and communications equipment whose original GAL22V10-class logic used a 28-PLCC socket. Electrically erasable flash technology permits a replacement to be configured with the required fuse map, while the same 20 ns speed class preserves the timing intent of the original 20 ns device. Before sourcing a substitute, compare every power pin, feedback path, registered output, and reserved test point in the manufacturer pin table. After programming, exercise all operating states and verify setup, hold, and propagation timing before placing the board back into service.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for ATF22V10CQZ-20JU — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | ATF22V10CQZ-20JI | ATF22V10CQZ-15JU | ATF22V10CQZ-10JU | ATF22V10CZ-20JU | ATF22LV10CQZ-20JU |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 28-PLCC (11.51 mm x 11.51 mm) | 28-PLCC (11.51 mm x 11.51 mm) | 28-PLCC (11.51 mm x 11.51 mm) | 28-PLCC (11.51 mm x 11.51 mm) | 28-PLCC (11.51 mm x 11.51 mm) | 28-PLCC (11.51 mm x 11.51 mm) |
| Device Type | Simple programmable logic device | Simple programmable logic device | Simple programmable logic device | Simple programmable logic device | Simple programmable logic device | Simple programmable logic device |
| Speed Grade | 20 ns | 20 ns | 15 ns | 10 ns | 20 ns | 20 ns |
Pangunahing mga Pagkakaiba
- Matches the original 20 ns timing designation while providing an alternate suffix (kumpara saATF22V10CQZ-20JI)
- Provides additional timing margin in the same family footprint (kumpara saATF22V10CQZ-15JU)
- Offers more timing headroom for legacy replacement boards (kumpara saATF22V10CQZ-10JU)
- Preserves electrically erasable flash programmability (kumpara saATF22V10CZ-20JU)
Talaan ng Disenyo
Do not approve a replacement solely because it is labeled ATF22V10C or uses a 28-PLCC outline. Compare the complete manufacturer pin table, power configuration, input and output function, registered-output behavior, and fuse-map compatibility for the exact suffix. The 10 macrocells and 10 registers must also match the logic implementation, and a 20 ns timing designation must remain compatible with the system’s setup, hold, and propagation requirements.
Preserve the original PLCC footprint, pin-1 orientation, socket or solder-joint geometry, and lead-free coplanarity when replacing an installed ATF22V10CQZ-20JU. Inspect the PCB for lifted pads and confirm that the replacement can be programmed with the intended fuse map before inserting it into a powered board. Program and test the device out of circuit where practical, then verify every I/O after installation.
Build the timing budget using the selected 20 ns propagation-delay class and the external counter, decoder, or peripheral timing requirements. The ATF22V10CQZ family supports speeds down to 12 ns, so a faster grade may be justified when the installed system lacks margin. Simulation should include the configured feedback paths and registered outputs because unused macrocell terms do not provide automatic timing optimization.
Decouple the 5 V supply close to the PLCC power and ground connections using the manufacturer’s recommended bypassing arrangement. Check for legacy boards containing damaged electrolytic capacitors or contaminated sockets before applying power. Confirm that the source remains within the device’s allowable voltage range and that all configured outputs do not exceed their specified load-current limits.
Impormasyon ng Pagsunod sa Kautusan
The ATF22V10CQZ product page and retrieved listings do not provide explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations. AEC-Q100 is not applicable to this general-purpose programmable-logic device.