Microchip Technology

ATF22V10CQZ-20JU - 20 ns EEPLD, 10 Macrocells | Microchip

MPN: ATF22V10CQZ-20JU ✓ Active
5 V Vdss 28-PLCC (11.51 mm x 11.51 mm) Package 20 ns Speed
MOQ: 1 |

ATF22V10CQZ-20JU Overview

The Microchip Technology ATF22V10CQZ-20JU is a 20 ns electrically erasable CMOS programmable logic device with 10 macrocells, 28 I/O pins, and 10 registers, packaged in a 28-PLCC measuring 11.51 mm by 11.51 mm. It belongs to the ATF22V10C family of simple programmable logic devices, combining erasable flash memory with configurable digital logic for compact control, decoding, and interface functions.

A simple programmable logic device, or SPLD, is a semiconductor that combines a fixed internal logic structure with user-programmable connections. Within the broader programmable-logic hierarchy, an SPLD sits below more complex CPLD and FPGA devices. It is useful when a design needs combinational or registered Boolean logic, but a full FPGA would add unnecessary cost, power, and programming complexity. The ATF22V10CQZ family implements this role using electrically erasable CMOS flash memory.

The ATF22V10CQZ-20JU provides a nominal 20 ns speed grade, 10 macrocells, 28 I/O pins, and 10 registers. The wider ATF22V10CQZ family also supports speeds down to 12 ns and specifies zero standby power dissipation. Its electrically erasable architecture permits the stored logic configuration to be reprogrammed, making the device suitable for prototype refinement, production control logic, interface conditioning, and legacy equipment maintenance.

The ATF22V10C family is based on electrically erasable flash technology rather than a one-time-programmable fuse array. This distinction allows design changes without replacing the device. Its 10 registers support registered logic operations, while the 10 macrocells provide the configurable Boolean building blocks used to implement product-term equations, state-machine decoding, and control sequences.

Typical uses include industrial control logic, printer and copier sequencing, peripheral-interface decoding, data-routing networks, and replacement of GAL22V10-family logic in existing equipment. Its 28-PLCC package supports through-hole assembly and inspection, which is advantageous for legacy industrial and telecommunications platforms that were not designed around fine-pitch surface-mount packages.

For a new design, verify every pin against the manufacturer pin-description table and confirm the programmed fuse map before production release. Use the manufacturer’s development programming environment and an equivalent device for functional simulation, and review timing assumptions at the system clock frequency before using this 20 ns grade in a demanding synchronous path.

This page consolidates the device specifications, verified drop-in alternatives, package considerations, and practical replacement guidance into an engineering-focused selection reference. It also distinguishes speed-grade, package, and architecture differences that must be checked before treating a similarly named ATF22V10C device as an interchangeable replacement.

Drop-in alternatives for ATF22V10CQZ-20JU — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

Variants in this series

Same-series models that are drop-in compatible with ATF22V10CQZ-20JU (same form factor and footprint) — differing in Device Type, Package, Mounting Type, Programmable Technology.

Microchip Technology
Device Type: 22V10 electrically erasable CMOS programmable logic device
Package: 28-pin PLCC, 11.51 mm × 11.51 mm
Compare with ATF22V10CQZ-20JU →
Microchip Technology
Device Type: Electrically erasable CMOS programmable logic device
Package: 28-pin PLCC, 11.51 x 11.51 mm
Mounting Type: Surface mount
Compare with ATF22V10CQZ-20JU →
Microchip Technology
Device Type: High-performance electrically erasable CMOS programmable logic device
Package: 28-pin PLCC, 11.51 mm x 11.51 mm
Mounting Type: Surface mount
Compare with ATF22V10CQZ-20JU →

ATF22V10CQZ-20JI

✅ Drop-In
Microchip Technology
📦 28-PLCC (11.51 mm x 11.51 mm)
High-performance electrically erasable CMOS programmable logic device · EPLD · 10 macrocells · 500 gates · 20 ns · 50 MHz · 5 V · 10 I/O pins

Contact for price

View Datasheet →

ATF22V10CQZ-15JU

✅ Drop-In ⚠️ Specs Unverified
📦 28-PLCC (11.51 mm x 11.51 mm)
Propagation delay is 15 ns versus 20 ns, 25% faster; the pin-compatible faster grade adds timing margin in eligible paths.

📋 Reference alternative (not in catalog)

ATF22V10CQZ-10JU

✅ Drop-In ⚠️ Specs Unverified
📦 28-PLCC (11.51 mm x 11.51 mm)
Propagation delay is 10 ns versus 20 ns, 50% faster; the pin-compatible faster grade changes the timing specification.

📋 Reference alternative (not in catalog)

ATF22V10CZ-20JU

✅ Drop-In ⚠️ Specs Unverified
📦 28-PLCC (11.51 mm x 11.51 mm)
Propagation delay is 20 ns versus 20 ns, a 0% timing difference; the Q versus non-Q family suffix requires pin and configuration verification.

📋 Reference alternative (not in catalog)

ATF22LV10CQZ-20JU

✅ Drop-In ⚠️ Specs Unverified
📦 28-PLCC (11.51 mm x 11.51 mm)
The 20 ns speed designation is unchanged, but the LV family uses a different voltage architecture, creating a supply-voltage difference that must be verified.

📋 Reference alternative (not in catalog)

ATF22V10CQZ-20JU Maximum Ratings & Electrical Characteristics

Device Type Simple programmable logic device (SPLD)
Programmable Technology Electrically erasable CMOS flash memory
Speed Grade 20 ns
Macrocells 10 macrocells
User I/O Pins 28 I/O pins
Registers 10 registers
Equivalent Logic Capacity 500 gates
Maximum Frequency 50 MHz
Supply Voltage 5 V
Family Speed Capability Speeds down to 12 ns
Standby Power Dissipation 0 W
Package 28-PLCC (11.51 mm x 11.51 mm)
Mounting Type Through-hole surface-mount-compatible PLCC
Logic Family CMOS
Programming Method Electrically erasable flash programming

ATF22V10CQZ-20JU 28-plcc (11.51 mm x 11.51 mm) Pin Configuration Guide

Pin configuration for ATF22V10CQZ-20JU (28-plcc (11.51 mm x 11.51 mm) package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.

28-plcc (11.51 mm x 11.51 mm) package pinout diagram for ATF22V10CQZ-20JU

No detailed pinout data available for ATF22V10CQZ-20JU.

Refer to the datasheet for full pin configuration.

Typical Applications

ATF22V10CQZ-20JU is suitable for 6 applications: Industrial Control Sequencing, Printer and Copier Control, Peripheral Interface Decoding, Telecommunications Status Logic, Data Routing and Address Decode, Legacy Equipment Maintenance.

🏭

Industrial Control Sequencing

The ATF22V10CQZ-20JU fits compact industrial control logic because its 10 macrocells and 10 registers can implement state-machine decoding, command sequencing, and latch-based interlocks in a 28-PLCC package. The 20 ns speed grade provides a defined timing class for moderate clock rates, while electrically erasable flash permits design revisions without replacing the programmed device. A legacy machine controller can place the PLCC directly on a through-hole logic board, reducing the need for a larger FPGA. Before installation, confirm the supply voltage, environmental limits, and programmed fuse map against the manufacturer documentation.

🖨️

Printer and Copier Control

The ATF22V10CQZ-20JU is appropriate for printer, copier, and office-equipment sequencing blocks that combine input decoding with registered control outputs. Its 10 macrocells can divide the implementation among product-term equations and state transitions, while the 10 registers support timing-sensitive output sequencing. The electrically erasable configuration is particularly useful during production testing because firmware or logic-map corrections can be made without another specialized fuse-programming method. The 28-PLCC footprint fits established equipment-control boards, but the exact I/O assignments and timing must be copied from the manufacturer pin table rather than inferred from another ATF22V10C variant.

🔧

Peripheral Interface Decoding

The ATF22V10CQZ-20JU can serve as an interface decoder between older system logic and a programmable peripheral. Ten macrocells are sufficient for address qualification, command translation, chip-select generation, and status-line arbitration in many legacy designs, while the device’s 28 I/O pins provide flexible routing. Its 20 ns propagation-delay class must be included in the peripheral timing budget, particularly for handshake signals or address decode paths operating near the system clock limit. Electrically erasable flash makes it useful for field-serviceable equipment where interface revisions are expected after initial deployment.

🌐

Telecommunications Status Logic

The ATF22V10CQZ-20JU is suitable for telecommunications equipment that uses dedicated programmable logic to qualify alarms, route status signals, or implement backplane timing functions. Its 10 registers can hold state across clock boundaries, and its macrocell architecture supports Boolean equations common in legacy line-card designs. The through-hole 28-PLCC package is advantageous for repairable platforms with plated-through-hole boards and socketed logic devices. The zero standby-power family rating also benefits continuously energized equipment. Nevertheless, the complete operating-temperature grade, supply tolerances, and timing limits should be confirmed for the intended rack environment before field deployment.

🖥️

Data Routing and Address Decode

The ATF22V10CQZ-20JU can implement address decoders, data selectors, and fixed routing networks where a full programmable-logic array would be excessive. Its 10 macrocells provide enough product-term logic for many small decoders, and the 28-pin package offers more routing options than a narrow logic IC. The 20 ns timing grade must be compared with the slowest address or select signal in the system; the faster ATF22V10CQZ alternatives add margin when timing closure is difficult. Because the programmed fuse map determines behavior, validate the design with a simulation and an equivalent device before releasing it to production.

🧩

Legacy Equipment Maintenance

The ATF22V10CQZ-20JU is valuable for maintaining older industrial, office, and communications equipment whose original GAL22V10-class logic used a 28-PLCC socket. Electrically erasable flash technology permits a replacement to be configured with the required fuse map, while the same 20 ns speed class preserves the timing intent of the original 20 ns device. Before sourcing a substitute, compare every power pin, feedback path, registered output, and reserved test point in the manufacturer pin table. After programming, exercise all operating states and verify setup, hold, and propagation timing before placing the board back into service.

What is ATF22V10CQZ-20JU?
The ATF22V10CQZ-20JU is a 20 ns electrically erasable CMOS simple programmable logic device from Microchip Technology. According to the Microchip ATF22V10CQZ product page, it uses electrically erasable flash memory and provides 10 macrocells, 28 I/O pins, and 10 registers in a 28-PLCC package. It is intended for compact Boolean, control, decoding, and registered-logic implementations where a larger FPGA or CPLD would be unnecessary.
What are the key specifications of ATF22V10CQZ-20JU that engineers should know?
The ATF22V10CQZ-20JU is a 20 ns, 5 V CMOS SPLD with 10 macrocells, 28 I/O pins, and 10 registers. The manufacturer describes a family architecture that supports speeds down to 12 ns and zero standby power dissipation. Its electrically erasable flash configuration supports reprogramming, while the 28-PLCC package measures 11.51 mm by 11.51 mm and is suited to established through-hole assembly platforms.
Where can I download the ATF22V10CQZ datasheet PDF?
The official ATF22V10CQZ datasheet and product documentation are available through the Microchip Technology product page listed on this page. The ATF22V10CQZ-20JU is a 20 ns ordering variant within that family, so use the family pin table, timing information, programming instructions, and ordering guide together with the specific suffix data. The manufacturer datasheet is the authoritative source for assigning every PLCC pin.
Where can I find the ATF22V10CQZ-20JU pinout?
The ATF22V10CQZ-20JU pin assignment is documented in the pin-description table of the manufacturer datasheet. This device uses a 28-PLCC package with 28 I/O pins and 10 macrocells. Use the package drawing and pin-description table together when assigning supply, ground, clock, input, and output connections. Confirm the exact ATF22V10C suffix before copying connections into a replacement PCB.
ATF22V10CQZ-20JU vs ATF22V10CQZ-20JI — which is better?
The ATF22V10CQZ-20JU and ATF22V10CQZ-20JI share the 20 ns ATF22V10CQZ timing class and the 28-PLCC footprint, but their ordering suffixes must be checked for temperature-grade and qualification differences. Both use 10 macrocells, 28 I/O pins, and 10 registers according to product listings. Choose the suffix whose environmental rating matches the intended industrial operating environment rather than assuming the final letter has no effect.
When should I choose ATF22V10CQZ-20JU over a faster ATF22V10C grade?
Choose the ATF22V10CQZ-20JU when the design operates within a 20 ns timing class and does not require one of the faster grades available in the ATF22V10CQZ family. The family supports speeds down to 12 ns, so a faster grade may provide additional timing margin in critical synchronous paths. The 20 ns part remains appropriate where its timing budget is sufficient and lower cost or planned sourcing is a priority.
Is ATF22V10CQZ-20JU suitable for industrial control logic?
The ATF22V10CQZ-20JU is technically suitable for compact industrial control, decoding, and interface-sequencing functions when its electrical and temperature ratings satisfy the equipment specification. It provides 10 macrocells, 10 registers, and a 20 ns speed grade in a 28-PLCC package. Because the exact operating-temperature limits are not stated in the retrieved product summary, verify the suffix-specific limits in the manufacturer datasheet before approving the part for a deployed system.
What is the best drop-in replacement for ATF22V10CQZ-20JU?
The closest drop-in candidate is ATF22V10CQZ-20JI because it retains the 20 ns speed class and 28-PLCC package. Other ATF22V10C and ATF22LV10C variants may share the physical footprint, but speed, voltage, and temperature-grade differences must be verified before substitution. Confirm the complete pin table, programmed fuse map, supply requirements, and timing parameters; a matching package alone does not guarantee equivalent behavior.
Can ATF22V10CQZ-20JI replace ATF22V10CQZ-20JU?
ATF22V10CQZ-20JI can be considered for replacement because the cross-reference listing identifies it as the closest ordering variant to the ATF22V10CQZ-20JU and both have a 20 ns timing designation. Verify the environmental-grade suffix and obtain the manufacturer’s pin and ordering information before approving it. Existing programmed logic must also remain compatible with the replacement device’s fuse map and configuration procedure.
What can replace ATF22V10CQZ-20JU in a legacy PLCC design?
A legacy design should first consider ATF22V10CQZ-20JI and other ATF22V10CQZ speed grades that use the same 28-PLCC footprint. An ATF22LV10CQZ option may also fit the mechanical outline, but its voltage architecture and timing must be checked before it is treated as a drop-in replacement. The safe procedure is to compare the pin descriptions, fuse map, supply voltage, propagation delays, and operating-temperature requirements rather than relying on the family name alone.
Is ATF22V10CQZ-20JU the same as GAL22V10D-5LJ?
No, the ATF22V10CQZ-20JU and GAL22V10D-5LJ are not equivalent simply because they can address similar GAL22V10-style logic. The ATF22V10CQZ-20JU is specified as a 20 ns electrically erasable CMOS device, while the GAL22V10D comparison candidate has a different 5 ns speed designation. A board-level migration requires pin mapping, configuration compatibility, voltage, timing, and system-level validation; the faster timing class alone does not establish interchangeability.
What is the best Microchip equivalent for ATF22V10CQZ-20JU?
The best Microchip candidate is ATF22V10CQZ-20JI because it preserves the 20 ns speed designation and is identified by a component cross-reference listing. Faster ATF22V10CQZ grades can offer more timing margin, while ATF22LV10C variants require careful review of supply voltage and architecture. The final choice depends on the required timing budget, environmental grade, programmed configuration, and confirmation that the manufacturer pin table matches the existing PCB.
How much power does ATF22V10CQZ-20JU consume?
The ATF22V10CQZ family is specified with zero standby power dissipation, meaning the device does not consume standby current during its inactive state according to the Microchip product page. Active power depends on supply voltage, operating frequency, output loading, and the programmed logic configuration. Because no active-current or operating-frequency-based power table appears in the retrieved specification summary, use the manufacturer electrical characteristics for a final dissipation calculation.
Where can I buy ATF22V10CQZ-20JU online?
Use the Request a Quote form on this page to ask for ATF22V10CQZ-20JU availability, current lead time, and the exact 28-PLCC packing option required by your assembly process. The part is listed in a 28-PLCC package and is also associated with tube-packaged inventory listings. Confirm the manufacturer suffix, operating grade, and quantity needed when submitting the request to avoid ordering an incorrect package or temperature-grade variant.
What is the price of ATF22V10CQZ-20JU?
The current commercial price for ATF22V10CQZ-20JU should be requested through the Request a Quote form on this page. Pricing for this legacy programmable-logic device can vary with the ordered packing method, minimum order quantity, and current availability. The request should identify the exact MPN, quantity, and required package format so the quotation reflects the correct 28-PLCC configuration.
What is the lead time for ATF22V10CQZ-20JU?
The current lead time for ATF22V10CQZ-20JU is available through the Request a Quote form on this page. Because availability can change for programmable-logic devices, the request should state the required quantity and whether the device must be supplied in tubes. The 28-PLCC package and exact MPN should remain unchanged when comparing lead-time quotations.
Is ATF22V10CQZ-20JU currently in stock?
Current stock for ATF22V10CQZ-20JU should be confirmed through the Request a Quote form on this page. The component is associated with manufacturer and distributor listings for the 28-PLCC package, but a listing alone does not establish present inventory at every quantity. Submit the exact MPN and required quantity to obtain an availability response tied to the current supply position.

Engineering reference data for ATF22V10CQZ-20JU — comparison, design guidance, and compliance information.

Selection Guide

Choose the ATF22V10CQZ-20JU when maintaining or designing a 5 V logic system that uses a 28-PLCC ATF22V10CQZ device, needs a 20 ns timing class, and requires electrically erasable flash programming. Select ATF22V10CQZ-20JI when it is the environmental-grade or ordering variant approved for the application; its nominal speed is unchanged. Use ATF22V10CQZ-15JU or ATF22V10CQZ-10JU when extra timing margin is valuable and the fuse map, supply, and pin configuration remain compatible. Consider ATF22V10CZ-20JU only after confirming the Q versus non-Q suffix in the manufacturer documentation. ATF22LV10CQZ-20JU is appropriate only when its lower-voltage architecture matches the board and timing requirements. For every candidate, confirm the 28-PLCC footprint, pin assignments, programmed configuration, temperature grade, supply voltage, and timing before treating it as a drop-in replacement.

Comparison with Alternatives

Parameter This Product ATF22V10CQZ-20JI ATF22V10CQZ-15JU ATF22V10CQZ-10JU ATF22V10CZ-20JU ATF22LV10CQZ-20JU
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 28-PLCC (11.51 mm x 11.51 mm) 28-PLCC (11.51 mm x 11.51 mm) 28-PLCC (11.51 mm x 11.51 mm) 28-PLCC (11.51 mm x 11.51 mm) 28-PLCC (11.51 mm x 11.51 mm) 28-PLCC (11.51 mm x 11.51 mm)
Device Type Simple programmable logic device Simple programmable logic device Simple programmable logic device Simple programmable logic device Simple programmable logic device Simple programmable logic device
Speed Grade 20 ns 20 ns 15 ns 10 ns 20 ns 20 ns

Key Differentiators

  • Matches the original 20 ns timing designation while providing an alternate suffix (vs ATF22V10CQZ-20JI)
  • Provides additional timing margin in the same family footprint (vs ATF22V10CQZ-15JU)
  • Offers more timing headroom for legacy replacement boards (vs ATF22V10CQZ-10JU)
  • Preserves electrically erasable flash programmability (vs ATF22V10CZ-20JU)

Design Notes

Do not approve a replacement solely because it is labeled ATF22V10C or uses a 28-PLCC outline. Compare the complete manufacturer pin table, power configuration, input and output function, registered-output behavior, and fuse-map compatibility for the exact suffix. The 10 macrocells and 10 registers must also match the logic implementation, and a 20 ns timing designation must remain compatible with the system’s setup, hold, and propagation requirements.

Preserve the original PLCC footprint, pin-1 orientation, socket or solder-joint geometry, and lead-free coplanarity when replacing an installed ATF22V10CQZ-20JU. Inspect the PCB for lifted pads and confirm that the replacement can be programmed with the intended fuse map before inserting it into a powered board. Program and test the device out of circuit where practical, then verify every I/O after installation.

Build the timing budget using the selected 20 ns propagation-delay class and the external counter, decoder, or peripheral timing requirements. The ATF22V10CQZ family supports speeds down to 12 ns, so a faster grade may be justified when the installed system lacks margin. Simulation should include the configured feedback paths and registered outputs because unused macrocell terms do not provide automatic timing optimization.

Decouple the 5 V supply close to the PLCC power and ground connections using the manufacturer’s recommended bypassing arrangement. Check for legacy boards containing damaged electrolytic capacitors or contaminated sockets before applying power. Confirm that the source remains within the device’s allowable voltage range and that all configured outputs do not exceed their specified load-current limits.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

The ATF22V10CQZ product page and retrieved listings do not provide explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations. AEC-Q100 is not applicable to this general-purpose programmable-logic device.

Related Searches

atf22v10cqz datasheet ATF22V10CQZ-20JU datasheet ATF22V10CQZ-20JU datasheet pdf ATF22V10CQZ-20JU pinout ATF22V10CQZ-20JU equivalent ATF22V10CQZ-20JU replacement ATF22V10CQZ-20JU cross reference ATF22V10CQZ-20JU vs ATF22V10CQZ-20JI ATF22V10CQZ-20JU 20ns EEPLD ATF22V10CQZ-20JU 28-PLCC ATF22V10CQZ-20JU industrial control ATF22V10CQZ-20JU price ATF22V10CQZ-20JU stock Microchip ATF22V10CQZ-20JU

Related Components & Terms

Microchip Technology ATF22V10CQZ-20JU ATF22V10CQZ ATF22V10CQZ-20JI ATF22V10CQZ-15JU ATF22V10CQZ-10JU ATF22V10CZ-20JU ATF22LV10CQZ-20JU simple programmable logic device SPLD electrically erasable programmable logic device EEPLD programmable logic device PLD CMOS electrically erasable flash memory macrocelle registered logic 28-PLCC PLCC package through-hole technology industrial control peripheral interface decoding address decoding propagation delay standby power dissipation
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details