Microchip Technology

ATSAMD21E18A-AU - 48MHz Cortex-M0+ MCU | Microchip

MPN: ATSAMD21E18A-AU ✓ Nakahanda
1.6 V to 3.6 V Vdss 32-pin TQFP, 7 x 7 mm Package 48 MHz Speed 256 KB Memory
MOQ: 1 |

ATSAMD21E18A-AU Ulas

The Microchip Technology ATSAMD21E18A-AU is a 32-bit ARM Cortex-M0+ Flash microcontroller operating up to 48 MHz, with 256 KB of Flash memory and 32 KB of SRAM in a 32-pin TQFP package. It combines a compact general-purpose MCU architecture with integrated serial interfaces and analog peripherals for embedded control applications.

A microcontroller is a programmable semiconductor that integrates a CPU core, nonvolatile program memory, working memory, input/output ports, and peripherals onto one package. The Cortex-M0+ processor belongs to the ARM Cortex-M family of low-power, deterministic embedded processors. Within the device hierarchy, the ATSAMD21E18A-AU is a SAM D21E-family MCU and a Flash-based embedded controller designed to operate from a 1.6 V to 3.6 V supply.

The principal device ratings include a maximum CPU frequency of 48 MHz, 256 KB of Flash storage, 32 KB of SRAM, and a 1.6 V to 3.6 V operating-voltage range. The part is identified as a Functional Safety microcontroller in the DigiKey product listing. Its integrated interface resources include I2C, SPI, UART/USART, USB, DMA, and I2S capabilities, while its approximately 26 general-purpose I/O lines provide flexible connections to sensors, actuators, displays, and external communications devices.

The SAM D21 architecture combines a 32-bit Cortex-M0+ core with event-oriented peripherals and direct-memory-access support. This structure allows peripheral transfers to occur without requiring each byte to be processed by the CPU. The 48 MHz operating limit provides additional scheduling and signal-processing headroom compared with slower general-purpose MCUs, while the 256 KB Flash area supports substantially larger embedded applications than devices limited to 64 KB of program memory.

Typical applications include connected home automation, industrial sensing and metering, consumer controls, compact sensor nodes, and USB-connected embedded accessories. The I2C and SPI interfaces suit sensors and memory devices, UART/USART supports serial modules, and USB enables configuration, logging, or firmware update connectivity when the board design implements the required USB circuitry.

Design the PCB with short, continuous supply and ground paths, place decoupling capacitors close to the supply pins, and route sensitive analog and communications signals away from fast-switching nodes. Confirm the package pin assignments and alternate-function requirements in the manufacturer datasheet before assigning external functions or programming the device.

This product record combines the manufacturer’s device characteristics with package, sourcing, and replacement guidance. It also identifies engineering trade-offs for the ATSAMD21E18A-AU and explains which same-package alternatives can be evaluated when supply, qualification, or device functionality differs.

Mga alternatibo na pwedeng ilagay na ATSAMD21E18A-AU — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

Variante sa Seri na ito

Katulad na modelo sa serye na katugma sa pagpasok ATSAMD21E18A-AU (parehas na form factor at footprint) — pagkakaiba sa Package, RoHS Status, ADC, SRAM, Flash Memory.

Microchip Technology
Package: 32-pin TQFP, 7 x 7 mm
SRAM: 32 KB
Flash Memory: 256 KB
Ikabit sa ATSAMD21E18A-AU →
Microchip Technology
Package: 32-TQFP 7x7 mm
RoHS Status: Compliant
ADC: 12-bit, 350 ksps, up to 14 channels
Ikabit sa ATSAMD21E18A-AU →
Microchip Technology
Package: 32-pin TQFP (7x7 mm)
RoHS Status: Compliant (Pb-free)
ADC: 12-bit, up to 20 channels, 350 ksps
Ikabit sa ATSAMD21E18A-AU →
Microchip Technology
Package: 32-TQFP (7x7 mm)
RoHS Status: Compliant
ADC: 12-bit, up to 350 ksps
Ikabit sa ATSAMD21E18A-AU →
Microchip Technology
RoHS Status: Green
SRAM: 16 KB
Flash Memory: 128 KB
Ikabit sa ATSAMD21E18A-AU →
Microchip Technology
Package: 32-pin TQFP, 7 mm x 7 mm
RoHS Status: Unknown
Ikabit sa ATSAMD21E18A-AU →
Microchip Technology
Package: 48-pin TQFP (7x7 mm)
RoHS Status: Compliant (Green package)
ADC: 14-channel, 12-bit
Ikabit sa ATSAMD21E18A-AU →

ATSAMD20E18A-AU

✅ Drop-In
Microchip Technology
📦 32-pin TQFP
ARM Cortex-M0+ · 32-bit · 48 MHz · 256 KB (256K x 8) · 32 KB · 1.62 V to 3.63 V · -40 C to +85 C (industrial) · 32-TQFP 7x7 mm

Magkontak para sa presyo

Tingnan ang Datasheet →

ATSAMD21E18A-AU Mga Pinakamataas na Rating at Electrical Characteristics

Product Type 32-bit ARM Cortex-M0+ Flash microcontroller
CPU Core Arm Cortex-M0+
Maximum CPU Frequency 48 MHz
Flash Memory 256 KB
SRAM 32 KB
Operating Voltage Range 1.6 V to 3.6 V
Packhaging 32-pin TQFP, 7 x 7 mm
General-Purpose I/O Approximately 26
Serial Interfaces I2C, SPI, UART/USART, USB, and I2S
DMA Support Yes
Functional Safety FuSa microcontroller
Program Memory Type Flash
Architecture Harvard
Uri ng Pagpapasok Surface mount

Gabay sa Pin Configuration ng ATSAMD21E18A-AU 32-pin tqfp, 7 x 7 mm

Pin configuration para sa ATSAMD21E18A-AU (32-pin tqfp, 7 x 7 mm package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.

Pinout diagram ng 32-pin tqfp, 7 x 7 mm package para sa ATSAMD21E18A-AU

Wala ng detalyadong pinout data na magagamit para sa ATSAMD21E18A-AU.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

ATSAMD21E18A-AU ay nararapat para sa 6 aplikasyons: Home Automation Controller, Industrial Sensor Node, USB-Connected Embedded Accessory, Smart Energy Metering, Consumer Appliance Control, Data Logger and Remote Sensor Interface.

🧩

Home Automation Controller

The ATSAMD21E18A-AU fits a compact home-automation controller because its 48 MHz Cortex-M0+ core provides useful scheduling headroom while the 256 KB Flash and 32 KB SRAM support protocol handlers, state machines, and local configuration data. I2C and SPI can connect environmental sensors, display controllers, and memory devices, while UART/USART supports radio or gateway modules. The 32-pin TQFP package limits the available I/O to approximately 26 general-purpose lines, so the design should map each switch, relay, and sensor connection before finalizing the PCB.

🏭

Industrial Sensor Node

The ATSAMD21E18A-AU is appropriate for a low-power industrial sensor node that combines several sensing and communications functions. Its 48 MHz processing rate supports protocol processing and local filtering, while the 1.6 V to 3.6 V operating range permits integration with 3.3 V sensor systems. I2C and SPI can serve digital sensors, while UART/USART can provide a robust link to a local controller. Design the supply section for the selected radio or actuator load, provide local decoupling, and validate the environmental requirements independently of the MCU’s functional-safety designation.

🔧

USB-Connected Embedded Accessory

The ATSAMD21E18A-AU can serve as the controller in a USB-connected accessory that needs more program storage than a small 8-bit MCU. Its 256 KB Flash accommodates firmware, USB descriptors, configuration handling, and application logic, while 32 KB of SRAM supports transient protocol buffers. The integrated USB capability can support configuration, diagnostics, or firmware update paths, subject to the required external USB circuit implementation. Confirm device programming, boot behavior, bus-routing details, and signal integrity against the manufacturer reference design before production.

📡

Smart Energy Metering

The ATSAMD21E18A-AU is suitable for metering equipment that must combine acquisition control, calibration routines, and a communications interface. Its 48 MHz Cortex-M0+ core can handle multiple scheduled tasks, while 256 KB of Flash and 32 KB of SRAM provide room for protocol stacks and working buffers. I2C and SPI suit external converters or memory, and UART/USART can connect a communications module. Because metering designs may require precise analog front ends and regulatory verification, keep the MCU interface layout deterministic and obtain the required metering-specific component requirements.

🔧

Consumer Appliance Control

The ATSAMD21E18A-AU can control a compact consumer appliance that combines buttons, indicators, sensors, and an external communications module. The 48 MHz core allows responsive control logic, and the 256 KB Flash supports a larger application and update mechanism than memory-constrained 8-bit devices. I2C and SPI provide flexible peripheral expansion, while UART/USART can interface with a display or radio module. The TQFP footprint is easy to inspect during production, but its approximately 26 I/O lines require careful budgeting for indicators, actuators, debug access, and future expansion.

🖥️

Data Logger and Remote Sensor Interface

The ATSAMD21E18A-AU fits a local data logger that receives information from sensors and forwards it through a serial or USB link. Its 32 KB of SRAM supports transient acquisition and protocol buffers, while the 48 MHz CPU supports efficient event handling and formatting. I2C and SPI are suitable for short-distance sensor connections, and DMA can reduce CPU involvement during peripheral transfers. Place serial interfaces away from switching nodes, keep the clock and power paths clean, and confirm the maximum peripheral clock and electrical limits in the manufacturer datasheet before selecting external memory.

What are the key specifications of ATSAMD21E18A-AU that engineers should know?
The ATSAMD21E18A-AU is a 32-bit Arm Cortex-M0+ microcontroller rated up to 48 MHz, with 256 KB of Flash memory, 32 KB of SRAM, and a 1.6 V to 3.6 V operating range. It is packaged in a 32-pin TQFP measuring 7 x 7 mm. According to the Microchip product page and DigiKey listing, the device is a Functional Safety microcontroller and includes I2C, SPI, UART/USART, USB, DMA, I2S, and approximately 26 general-purpose I/O lines.
What is the operating voltage of ATSAMD21E18A-AU?
The ATSAMD21E18A-AU operates from 1.6 V to 3.6 V. This range supports low-voltage embedded systems while providing margin around a nominal 3.3 V rail. The Mouser product listing identifies the same 1.6 V to 3.6 V operating-voltage range and 48 MHz maximum frequency. Use the manufacturer’s electrical-characteristics table when designing the regulator, decoupling network, and input-voltage tolerances.
How much Flash and SRAM does ATSAMD21E18A-AU have?
The ATSAMD21E18A-AU provides 256 KB of Flash memory and 32 KB of SRAM. The Microchip product page identifies those capacities for the ATSAMD21E18 family, while the DigiKey listing describes the Flash as 256K x 8. These resources support embedded firmware, boot code, data buffers, communication stacks, and moderate local storage without an external memory device.
Where can I download the ATSAMD21E18A datasheet PDF?
The official ATSAMD21E18 product page is the best starting point for the ATSAMD21E18A-AU datasheet and associated documentation. The indexed ATSAMD21E18A-AU PDF also links directly to the ATMEL-era document. Use the manufacturer’s pin-description table, electrical characteristics, and package drawings to assign pins and validate the 32-pin TQFP layout before releasing the PCB.
Where can I find the ATSAMD21E18A-AU pinout?
The ATSAMD21E18A-AU pinout is found in the manufacturer’s pin-description table for the 32-pin TQFP package. An indexed engineering pinout page also identifies the device as available in TQFP-32 and QFN-32 configurations, but the manufacturer datasheet remains authoritative for exact pin numbers, reset behavior, and alternate functions. Assign every external signal from that table rather than relying on board-layout conventions.
Is ATSAMD21E18A-AU suitable for Arduino projects?
Yes, the ATSAMD21E18A-AU is suitable for embedded projects that need more Flash memory and processing performance than small 8-bit AVR-class controllers. The indexed ATSAMD21E18A Arduino query reflects common interest in this device, and the MCU provides USB, I2C, SPI, UART/USART, and PWM-capable general-purpose I/O. Board design, bootloader support, pin mapping, and voltage compatibility must be verified before direct attachment to an Arduino ecosystem board.
What can replace ATSAMD21E18A-AU on the same 32-pin TQFP footprint?
The ATSAMD20E18A-AU is the closest same-package candidate identified in the cross-reference results, with both devices described as 32-pin TQFP Cortex-M0+ MCUs using 256 KB of Flash. It is not a functionally identical replacement because the SAM D20 and SAM D21 families differ in peripheral implementation and device-specific features. Treat it as an engineering-review candidate rather than an automatic substitution, and verify pin multiplexing, memory-map compatibility, USB behavior, and firmware requirements.
ATSAMD21E18A-AU vs ATSAMD20E18A-AU: which is better for a new design?
Choose the ATSAMD21E18A-AU for a new SAM D21E-based design because it belongs to the newer SAM D21 family and is identified specifically as a Functional Safety microcontroller. The ATSAMD20E18A-AU is described as a 32-pin TQFP SAM D20 Cortex-M0+ MCU with 256 KB of Flash. Both provide a 48 MHz-class platform, but their peripheral sets, register maps, and application support must be checked before deciding which can reuse an existing board.
Is ATSAMD21E18A-AU the same as ATSAMD21E18A-AU-SLL?
No. ATSAMD21E18A-AU-SLL is a separately identified ordering code associated with a 32-pin PQFP device, while ATSAMD21E18A-AU is a 32-pin TQFP ordering code. Package and ordering suffixes can distinguish mechanical form, temperature grade, or shipment configuration. Verify the complete ordering information and package drawing before treating any two related MPNs as interchangeable.
When should I choose ATSAMD21E18A-AU over another SAM D21 microcontroller?
Choose the ATSAMD21E18A-AU when the design specifically requires the SAM D21E device in a 32-pin TQFP package, 256 KB of Flash, 32 KB of SRAM, and operation up to 48 MHz. A larger-pin SAM D21 variant may be preferable when additional I/O or dedicated peripheral connections are required. A lower-pin device may be preferable for compactness, but its exposed GPIO and multiplexed functions must support the target board.
What is the best 32-pin TQFP alternative for ATSAMD21E18A-AU?
The ATSAMD20E18A-AU is the best same-package engineering-review candidate in the available cross-reference results because it is explicitly described as a 32-pin TQFP, 48 MHz, 256 KB Flash Cortex-M0+ MCU. However, the part belongs to the SAM D20 family and is not established as a pin-to-pin functional replacement. Validate every pin, peripheral, interrupt, bootloader, and firmware dependency before selecting it for a drop-in redesign.
Where to buy ATSAMD21E18A-AU online?
Use the Request a Quote form on this page to request ATSAMD21E18A-AU availability, current lead time, and order details. The product is listed by Microchip Technology and appears in current distributor catalogs, but stock and commercial terms can vary by region, date, and quantity. Submit the required package and quantity information with the request rather than relying on an outdated catalog record.
What is the price of ATSAMD21E18A-AU?
Submit an ATSAMD21E18A-AU Request a Quote form on this page for the current unit price and volume breaks. No fixed price is stated here because the commercial offer is refreshed by XAIPART’s pricing system. Include the required quantity, packaging preference, destination, and target delivery date so the quotation can reflect the appropriate supply conditions.
What is the lead time for ATSAMD21E18A-AU?
Request the current lead time through the Request a Quote form on this page. Lead time depends on factory inventory, the selected ordering configuration, requested quantity, and destination, so it cannot be established from the device’s technical specifications alone. For production planning, provide your forecast and required delivery date with the quote request rather than treating a general catalog listing as a supply commitment.
Is ATSAMD21E18A-AU in stock?
Current ATSAMD21E18A-AU stock should be confirmed through the Request a Quote form on this page. Distributor listings indicate that the device is marketed for purchase, but inventory is not a fixed technical attribute and can change rapidly. State the quantity and target date in the request to obtain a current availability response for the exact MPN and ordering configuration.
What design considerations matter for ATSAMD21E18A-AU power and layout?
The ATSAMD21E18A-AU operates across 1.6 V to 3.6 V, so the supply regulator and decoupling network must accommodate its voltage range and transient demands. Place input and bulk-decoupling capacitors close to the relevant supply pins, provide a continuous return path, and route clocks and communications lines away from noisy or high-current paths. Exact pin placement, external-component values, and layout constraints should follow the manufacturer’s recommended application circuit.
Does ATSAMD21E18A-AU meet RoHS, REACH, or automotive requirements?
The available product information does not establish the complete RoHS, REACH, or AEC-Q100 status of ATSAMD21E18A-AU. Its Functional Safety designation does not by itself mean that the device is AEC-Q100 qualified for automotive use. Request the current manufacturer compliance and qualification documentation for the exact ordering code before treating the part as RoHS-compliant, REACH-compliant, or suitable for an automotive qualification program.

Impormasyon ng Talumpati sa Engineering for ATSAMD21E18A-AU — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Select the ATSAMD21E18A-AU for new embedded-control designs that call for a 48 MHz Arm Cortex-M0+ processor, 256 KB of Flash, 32 KB of SRAM, and a 32-pin TQFP package. Its identification as a Functional Safety microcontroller makes it the stronger starting point when functional-safety capability or SAM D21E ecosystem support is important. The ATSAMD20E18A-AU offers the same stated core frequency, Flash capacity, and 32-pin TQFP package class, so it may be useful for an alternate sourcing review. However, it belongs to the SAM D20 family, and the available information does not establish complete pin-to-pin functional equivalence. Review the alternative’s peripheral map, voltage configuration, register differences, debug interface, and firmware dependencies before approving a direct replacement.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto ATSAMD20E18A-AU
Package 32-pin TQFP, 7 x 7 mm 32-pin TQFP
Brand Microchip Technology Microchip Technology
CPU Core Arm Cortex-M0+ Arm Cortex-M0+
Maximum CPU Frequency 48 MHz 48 MHz
Flash Memory 256 KB 256 KB
Operating Voltage Range 1.6 V to 3.6 V 1.8 V, 2.5 V, or 3.3 V
Device Family SAM D21E SAM D20E

Pangunahing mga Pagkakaiba

  • Newer SAM D21E device family with Functional Safety identification (kumpara saATSAMD20E18A-AU)
  • Matches a 48 MHz, 256 KB Flash performance profile (kumpara saATSAMD20E18A-AU)
  • Uses a 32-pin 7 x 7 mm TQFP footprint (kumpara saATSAMD20E18A-AU)

Talaan ng Disenyo

Place the device-side supply capacitors immediately adjacent to the relevant VDD and ground pins, using the manufacturer’s recommended capacitance and ESR range. Keep the 1.6 V to 3.6 V operating limit in mind when selecting the regulator and defining fault behavior outside the valid range. Route the ground reference as a continuous plane or carefully stitched return path so return current from serial, USB, and switching-adjacent circuitry does not share long traces with the MCU.

Assign every TQFP pin from the manufacturer pin-description table before placing the schematic symbols or routing PCB traces. Several SAM D21E functions can be multiplexed onto the same I/O, and the required function may depend on peripheral settings or an alternate-function mux. Check package-pin numbering, power pins, ground pins, debug access, reset behavior, and boot-related connections rather than inferring the footprint from a generic 32-pin symbol.

Keep I2C, SPI, USB, and other communication routes short and isolated from clocks and high-current switching nodes. Follow the manufacturer’s recommended external resistor and capacitor arrangements for each interface, especially USB and reset. If an external crystal or resonator is used, place its load components and connection path close to the oscillator pins with a controlled ground return; otherwise, use the internal clock arrangement specified by the manufacturer.

Do not treat a related SAM D20 or SAM D21 ordering code as automatically interchangeable. Package size alone does not guarantee identical pin multiplexing, peripheral availability, interrupt behavior, bootloader operation, or register compatibility. The ATSAMD20E18A-AU is a useful same-package engineering-review candidate, but a production substitution requires comparison of every used pin, power requirement, clock source, peripheral instance, and firmware dependency against the original design.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

The Functional Safety designation in the DigiKey listing does not establish RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. Compliance documentation should be requested for the exact ordering code.

Data napatotohanan sa: 2026-11-15 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

atsamd21e18a datasheet atsamd21e18a mut atsamd21e18a mft atsamd21e18a aut atsamd21e18a arduino ATSAMD21E18A-AU datasheet pdf ATSAMD21E18A-AU pinout ATSAMD21E18A-AU equivalent ATSAMD21E18A-AU replacement ATSAMD21E18A-AU vs ATSAMD20E18A-AU ATSAMD21E18A-AU price ATSAMD21E18A-AU footprint

Mga kaugnay na Mga Komponente at mga Tuntunin

Microchip Technology ATSAMD21E18A-AU ATSAMD21E18 ATSAMD20E18A-AU ATSAMD21E18A-AF ATSAMD21E18A-MU ATSAMD21E18A-AU-SLL Arm Cortex-M0+ ARM Cortex-M processor family SAM D21E SAM D20E Flash microcontroller embedded microcontroller microcontroller semiconductor 32-pin TQFP TQFP package family surface mount SMD 256 KB Flash 32 KB SRAM 48 MHz I2C SPI UART/USART USB DMA I2S Functional Safety home automation industrial metering
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ