ATTINY44A-CCU - 20MHz 8-Bit AVR MCU | Microchip Technology
MPN: ATTINY44A-CCU ✓ NakahandaATTINY44A-CCU Ulas
An 8-bit AVR microcontroller is a compact semiconductor in the microcontroller and embedded-processing hierarchy. It combines a CPU core, program memory, data memory, timers, I/O ports, and serial interfaces on one device. The ATTINY44A family uses the AVR instruction set and picoPower technology to target low-power, cost-sensitive control applications where a larger processor and its associated memory would be unnecessary.
Key device features include 4 KB of in-system-programmable flash, 256 B of EEPROM, 256 B of SRAM, 32 general-purpose working registers, and 12 I/O lines. An 8-bit timer/counter provides two PWM channels, while the operating supply range of 2.5 V, 3.3 V, and 5 V supports common embedded voltage levels. The 15-UFBGA package reduces board area compared with conventional leaded or larger surface-mount packages.
The compact package exposes 12 I/O lines rather than the full set available on larger AVR devices. Designers must plan pin multiplexing carefully when combining serial communication, timer functions, external interrupts, and ADC inputs. Its 20 MHz operating capability provides additional timing headroom, while the picoPower architecture supports applications that spend significant time in low-activity states.
Typical uses include compact sensor interfaces, small industrial controllers, lighting controls, battery-powered accessories, and embedded products that require in-system programming. The 4 KB flash capacity is suitable for focused control firmware, while 256 B of EEPROM supports configuration retention and 256 B of SRAM supports working state.
The primary design constraint is footprint complexity. A 15-UFBGA device requires fine-pitch assembly and careful PCB escape routing, so its pin definition, exposed pad requirements, and recommended land pattern must be followed exactly. Verify programming access, decoupling, clock configuration, and unused-pin treatment against the manufacturer datasheet before releasing the PCB.
This product page combines the device architecture, package constraints, programming guidance, verified alternatives, and application-focused design guidance into one engineering reference. It also distinguishes true pin-compatible options from related AVR devices that differ in memory, package, or function.
Mga alternatibo na pwedeng ilagay na ATTINY44A-CCU — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
ATTINY44A-CCUR
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
ATTINY44A-CCU Mga Pinakamataas na Rating at Electrical Characteristics
| Architecture | 8-bit AVR RISC-based microcontroller |
| Maksimum na Taktiko ng Oras | 20 MHz |
| Program Flash Memory | 4 KB (2K x 16) |
| EEPROM Memory | 256 B |
| SRAM | 256 B |
| General-Purpose I/O Lines | 12 |
| General-Purpose Working Registers | 32 |
| Timer/Counter Resolution | 8-bit |
| Timer PWM Channels | 2 channels |
| Operating Voltage Options | 2.5 V, 3.3 V, and 5 V |
| Program Memory Type | In-system programmable flash |
| Core Technology | picoPower |
| Packhaging | 15-UFBGA (3 x 3 mm) |
| Uri ng Pagpapasok | Surface mount |
| Product Temperature Grade | Industrial |
Gabay sa Pin Configuration ng ATTINY44A-CCU 15-ufbga (3 x 3 mm)
Pin configuration para sa ATTINY44A-CCU (15-ufbga (3 x 3 mm) package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa ATTINY44A-CCU.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
ATTINY44A-CCU ay nararapat para sa 6 aplikasyons: Compact Sensor Interface Controller, Industrial Control and Relay Module, Battery-Powered Accessory Controller, LED Lighting Controller, Programmable Data Acquisition Node, Programmable Consumer Accessory.
Compact Sensor Interface Controller
The ATTINY44A-CCU fits compact sensor-hub designs that require local sampling, digital filtering, status indication, and serial data transfer without a larger processor. Its 12 general-purpose I/O lines provide flexibility for sensor inputs and control outputs, while 256 B of SRAM and 256 B of EEPROM are sufficient for small working buffers and retained configuration. The 4 KB flash footprint suits focused firmware rather than complex protocol stacks. In a 3.3 V or 5 V installation, designers can use the 20 MHz clock headroom for timed acquisition and responsive actuator control while preserving a compact 3 x 3 mm board footprint.
Inirekomenda
Industrial Control and Relay Module
The ATTINY44A-CCU is appropriate for small industrial control modules that combine digital inputs, relay or indicator outputs, timing, and local status reporting. Its 8-bit timer/counter with two PWM channels supports periodic control tasks and adjustable output behavior, while 12 I/O lines provide a practical interface to sensors and actuators. The 20 MHz maximum clock allows firmware to service multiple peripheral events efficiently. In an industrial control design, the compact 15-UFBGA package helps reduce board area, but production designs must provide stable decoupling, industrial-grade component selection, and verified protection for exposed wiring.
Inirekomenda
Battery-Powered Accessory Controller
The ATTINY44A-CCU works well in battery-powered accessories where the system must perform a small number of local functions without continuous heavy computation. The ATtiny44A family's picoPower architecture, 4 KB flash, and 256 B SRAM encourage a compact firmware footprint and can simplify low-power state management. Its 12 I/O lines are sufficient for buttons, indicators, and limited actuator control, while 20 MHz clock capability supports efficient event handling. A battery design should use the manufacturer sleep-mode characteristics to calculate average current, account for regulator quiescent current, and avoid placing always-on loads near the device.
Inirekomenda
LED Lighting Controller
The ATTINY44A-CCU can drive compact LED lighting systems where dimming, timing, and status patterns are required. Its timer/counter provides two PWM channels, making it well suited to basic intensity control and periodic effects without a dedicated lighting-control IC. Twelve I/O lines allow use of the remaining pins for pushbuttons, mode indicators, or interlock signals. The 4 KB flash limit favors concise lighting tables and state-machine firmware, while the 20 MHz clock provides sufficient timing margin for responsive updates. In a final design, confirm PWM polarity, output-drive capability, current limits, and thermal performance at the intended LED drive current.
Inirekomenda
Programmable Data Acquisition Node
The ATTINY44A-CCU is suitable for small acquisition nodes that digitize limited analog signals, apply simple filtering, and forward results over a serial interface. The device provides 12 I/O lines and an 8-bit timer/counter, while its 20 MHz clock supports deterministic sampling and peripheral service. Its 4 KB flash and 256 B SRAM constrain the application to focused acquisition logic, but that is appropriate for sensor nodes that perform preprocessing rather than high-volume buffering. Validate the analog input range and conversion performance against the manufacturer electrical characteristics, and keep sensitive analog routing away from fast digital clock and programming nets.
Inirekomenda
Programmable Consumer Accessory
The ATTINY44A-CCU is useful in programmable accessories that combine button input, LED indication, simple motor or relay control, and configuration storage. Its 20 MHz AVR core provides ample timing margin for debouncing and state management, while 256 B of EEPROM can retain settings and 256 B of SRAM can support transient control logic. The 15-UFBGA package reduces the product footprint to 3 x 3 mm, making it especially useful for space-constrained wearables and accessories. The 4 KB flash limit requires disciplined firmware organization, while the 12 available I/O lines must be allocated carefully among user controls, status outputs, and programming functions.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for ATTINY44A-CCU — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | ATTINY44A-CCUR |
|---|---|---|
| Brand | Microchip Technology | Microchip Technology |
| Package | 15-UFBGA (3 x 3 mm) | 15-UFBGA (3 x 3 mm) |
| CPU Architecture | 8-bit AVR RISC | 8-bit AVR RISC |
| Maximum Clock Frequency | 20 MHz | 20 MHz |
| Flash Memory | 4 KB (2K x 16) | 4 KB (2K x 16) |
| EEPROM Memory | 256 B | 256 B |
| SRAM | 256 B | 256 B |
| General-Purpose I/O Lines | 12 | 12 |
| Working Registers | 32 | 32 |
| Timer and PWM | 8-bit timer/counter with 2 PWM channels | 8-bit timer/counter with 2 PWM channels |
| Operating Voltage Options | 2.5 V, 3.3 V, and 5 V | 2.5 V, 3.3 V, and 5 V |
| Packing Format | Tray | Tape-and-reel |
Pangunahing mga Pagkakaiba
- Direct same-footprint ATtiny44A replacement (kumpara saATTINY44A-CCUR)
- Compact 12-I/O AVR integration (kumpara saATTINY44A-CCUR)
- Production packing flexibility (kumpara saATTINY44A-CCUR)
Talaan ng Disenyo
Treat the 15-UFBGA layout as a fine-pitch design rather than a generic BGA. Follow the manufacturer package drawing for pad dimensions, solder-mask clearance, and the exposed-pad connection. Route programming signals and clock lines away from sensitive analog inputs, and provide short ground connections around the device. Because the package is only 3 x 3 mm, inspection access for production testing should be designed before copper and mask artwork are frozen.
Place the required bypass capacitors adjacent to the supply and ground pins, with trace lengths kept as short as practical. Select capacitor voltage ratings and tolerance for the actual 2.5 V, 3.3 V, or 5 V rail, and account for regulator tolerance at the integrated circuit. If the board supports multiple voltage modes, verify the complete operating range against the manufacturer electrical characteristics rather than changing rails dynamically without checking frequency and peripheral limits.
Do not treat related ATtiny devices as automatic replacements. ATTINY24A-family parts have less program memory, while ATTINY84A-family parts have more, and other package suffixes use different physical footprints. The closest documented option is ATTINY44A-CCUR, which preserves the ATtiny44A configuration and 15-UFBGA footprint while changing packing. Validate memory size, pin assignments, programming interface, and package drawings before approving any substitution.
Preserve a dependable path for in-system programming even in a compact design. Provide accessible pads or a connector position that avoids assembly obstructions, keep the interface away from noisy power stages, and confirm signal levels against the selected operating voltage. Firmware should also be checked for clock initialization and brownout behavior because an incorrect startup configuration can make a board appear defective even when the microcontroller and package are functioning correctly.
Impormasyon ng Pagsunod sa Kautusan
The ATTINY44A product documentation must be checked for the current material and environmental declarations applicable to the exact ordering code.