Microchip Technology

ATTINY44A-CCU - 20MHz 8-Bit AVR MCU | Microchip Technology

部品番号: ATTINY44A-CCU ✓ 生産中
2.5 V, 3.3 V, and 5 V Vdss 15-UFBGA (3 x 3 mm) Package 20 MHz Speed 4 KB (2K x 16) Memory
MOQ: 1 |

ATTINY44A-CCU 概要

The Microchip Technology ATTINY44A-CCU is an 8-bit AVR RISC-based picoPower microcontroller with a 20 MHz maximum clock, 4 KB of ISP flash memory, 256 B of EEPROM, 256 B of SRAM, and 12 general-purpose I/O lines in a 15-UFBGA package measuring 3 x 3 mm. Its integrated peripherals support compact embedded control designs without requiring external memory.

An 8-bit AVR microcontroller is a compact semiconductor in the microcontroller and embedded-processing hierarchy. It combines a CPU core, program memory, data memory, timers, I/O ports, and serial interfaces on one device. The ATTINY44A family uses the AVR instruction set and picoPower technology to target low-power, cost-sensitive control applications where a larger processor and its associated memory would be unnecessary.

Key device features include 4 KB of in-system-programmable flash, 256 B of EEPROM, 256 B of SRAM, 32 general-purpose working registers, and 12 I/O lines. An 8-bit timer/counter provides two PWM channels, while the operating supply range of 2.5 V, 3.3 V, and 5 V supports common embedded voltage levels. The 15-UFBGA package reduces board area compared with conventional leaded or larger surface-mount packages.

The compact package exposes 12 I/O lines rather than the full set available on larger AVR devices. Designers must plan pin multiplexing carefully when combining serial communication, timer functions, external interrupts, and ADC inputs. Its 20 MHz operating capability provides additional timing headroom, while the picoPower architecture supports applications that spend significant time in low-activity states.

Typical uses include compact sensor interfaces, small industrial controllers, lighting controls, battery-powered accessories, and embedded products that require in-system programming. The 4 KB flash capacity is suitable for focused control firmware, while 256 B of EEPROM supports configuration retention and 256 B of SRAM supports working state.

The primary design constraint is footprint complexity. A 15-UFBGA device requires fine-pitch assembly and careful PCB escape routing, so its pin definition, exposed pad requirements, and recommended land pattern must be followed exactly. Verify programming access, decoupling, clock configuration, and unused-pin treatment against the manufacturer datasheet before releasing the PCB.

This product page combines the device architecture, package constraints, programming guidance, verified alternatives, and application-focused design guidance into one engineering reference. It also distinguishes true pin-compatible options from related AVR devices that differ in memory, package, or function.

ドロップイン代替品: ATTINY44A-CCU — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

ATTINY44A-CCUR

✅ ドロップイン
📦 15-UFBGA (3 x 3 mm)
Same ATtiny44A electrical configuration and 15-UFBGA footprint; packing changes from tray to tape-and-reel, while core parameters remain 20 MHz and 4 KB flash.

📋 参考代替品(カタログ未掲載)

ATTINY44A-CCU 最大定格&電気的特性

Architecture 8-bit AVR RISC-based microcontroller
最大クロック周波数 20 MHz
Program Flash Memory 4 KB (2K x 16)
EEPROM Memory 256 B
SRAM 256 B
General-Purpose I/O Lines 12
General-Purpose Working Registers 32
Timer/Counter Resolution 8-bit
Timer PWM Channels 2 channels
Operating Voltage Options 2.5 V, 3.3 V, and 5 V
Program Memory Type In-system programmable flash
Core Technology picoPower
パッケージ 15-UFBGA (3 x 3 mm)
実装タイプ Surface mount
Product Temperature Grade Industrial

ATTINY44A-CCU 15-ufbga (3 x 3 mm) ピン配置ガイド

ATTINY44A-CCU (15-ufbga (3 x 3 mm) パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。

ATTINY44A-CCU の 15-ufbga (3 x 3 mm) パッケージピン配置図

詳細なピン配置データはありません: ATTINY44A-CCU.

詳細は データシート をご参照ください。

主な用途

ATTINY44A-CCU の用途: 6 件s: Compact Sensor Interface Controller, Industrial Control and Relay Module, Battery-Powered Accessory Controller, LED Lighting Controller, Programmable Data Acquisition Node, Programmable Consumer Accessory.

🧩

Compact Sensor Interface Controller

The ATTINY44A-CCU fits compact sensor-hub designs that require local sampling, digital filtering, status indication, and serial data transfer without a larger processor. Its 12 general-purpose I/O lines provide flexibility for sensor inputs and control outputs, while 256 B of SRAM and 256 B of EEPROM are sufficient for small working buffers and retained configuration. The 4 KB flash footprint suits focused firmware rather than complex protocol stacks. In a 3.3 V or 5 V installation, designers can use the 20 MHz clock headroom for timed acquisition and responsive actuator control while preserving a compact 3 x 3 mm board footprint.

🏭

Industrial Control and Relay Module

The ATTINY44A-CCU is appropriate for small industrial control modules that combine digital inputs, relay or indicator outputs, timing, and local status reporting. Its 8-bit timer/counter with two PWM channels supports periodic control tasks and adjustable output behavior, while 12 I/O lines provide a practical interface to sensors and actuators. The 20 MHz maximum clock allows firmware to service multiple peripheral events efficiently. In an industrial control design, the compact 15-UFBGA package helps reduce board area, but production designs must provide stable decoupling, industrial-grade component selection, and verified protection for exposed wiring.

📱

Battery-Powered Accessory Controller

The ATTINY44A-CCU works well in battery-powered accessories where the system must perform a small number of local functions without continuous heavy computation. The ATtiny44A family's picoPower architecture, 4 KB flash, and 256 B SRAM encourage a compact firmware footprint and can simplify low-power state management. Its 12 I/O lines are sufficient for buttons, indicators, and limited actuator control, while 20 MHz clock capability supports efficient event handling. A battery design should use the manufacturer sleep-mode characteristics to calculate average current, account for regulator quiescent current, and avoid placing always-on loads near the device.

💡

LED Lighting Controller

The ATTINY44A-CCU can drive compact LED lighting systems where dimming, timing, and status patterns are required. Its timer/counter provides two PWM channels, making it well suited to basic intensity control and periodic effects without a dedicated lighting-control IC. Twelve I/O lines allow use of the remaining pins for pushbuttons, mode indicators, or interlock signals. The 4 KB flash limit favors concise lighting tables and state-machine firmware, while the 20 MHz clock provides sufficient timing margin for responsive updates. In a final design, confirm PWM polarity, output-drive capability, current limits, and thermal performance at the intended LED drive current.

📊

Programmable Data Acquisition Node

The ATTINY44A-CCU is suitable for small acquisition nodes that digitize limited analog signals, apply simple filtering, and forward results over a serial interface. The device provides 12 I/O lines and an 8-bit timer/counter, while its 20 MHz clock supports deterministic sampling and peripheral service. Its 4 KB flash and 256 B SRAM constrain the application to focused acquisition logic, but that is appropriate for sensor nodes that perform preprocessing rather than high-volume buffering. Validate the analog input range and conversion performance against the manufacturer electrical characteristics, and keep sensitive analog routing away from fast digital clock and programming nets.

⌚

Programmable Consumer Accessory

The ATTINY44A-CCU is useful in programmable accessories that combine button input, LED indication, simple motor or relay control, and configuration storage. Its 20 MHz AVR core provides ample timing margin for debouncing and state management, while 256 B of EEPROM can retain settings and 256 B of SRAM can support transient control logic. The 15-UFBGA package reduces the product footprint to 3 x 3 mm, making it especially useful for space-constrained wearables and accessories. The 4 KB flash limit requires disciplined firmware organization, while the 12 available I/O lines must be allocated carefully among user controls, status outputs, and programming functions.

What is the ATTINY44A-CCU?
The ATTINY44A-CCU is an 8-bit AVR RISC-based picoPower microcontroller operating at up to 20 MHz. It combines 4 KB of in-system-programmable flash, 256 B of EEPROM, 256 B of SRAM, 12 general-purpose I/O lines, 32 working registers, and two PWM channels in a 15-UFBGA package. The manufacturer product page identifies these resources as the core features of the ATtiny44A family.
What are the key specifications of ATTINY44A-CCU that engineers should know?
The ATTINY44A-CCU provides 4 KB of ISP flash, 256 B of EEPROM, 256 B of SRAM, 12 I/O lines, and a 20 MHz maximum clock. Its 8-bit timer/counter includes two PWM channels, and the device is offered in a compact 15-UFBGA package measuring 3 x 3 mm. These figures define the practical limits for firmware size, data retention, pin multiplexing, timing, and board area.
Where can I download the ATTINY44A datasheet PDF?
The official ATtiny44A product page is the appropriate starting point for the manufacturer datasheet and supporting documentation. The ATTINY44A-CCU is the tray-packaged ordering code for that family. Use the pin-description table, electrical characteristics, and package drawings from the manufacturer documentation before assigning the 15-UFBGA footprint or programming the device.
Where can I find the ATTINY44A pinout?
The ATTINY44A pinout is defined by the 15-UFBGA pin-description table and package drawing in the manufacturer datasheet. The device provides 12 general-purpose I/O lines in a 15-pin package, so the remaining positions must be treated according to their documented power, ground, programming, or no-connect assignments. The 3 x 3 mm land pattern should not be inferred from a generic BGA layout.
How is the ATTINY44A programmed?
The ATTINY44A supports in-system programming through its dedicated programming interface. The exact clock, control signals, and connector arrangement should be taken from the manufacturer programming and pinout documentation. For the 15-UFBGA ATTINY44A-CCU, also plan board access and test pads carefully because fine-pitch assembly limits practical probe access.
What supply voltage can ATTINY44A-CCU operate at?
The ATTINY44A-CCU is identified for 2.5 V, 3.3 V, and 5 V operating conditions. The manufacturer datasheet should be used to confirm the exact minimum and maximum voltage for each frequency, including clock and analog-peripheral operating conditions. Select decoupling and external components for the actual rail rather than treating all three voltage options as interchangeable.
What can replace ATTINY44A-CCU?
ATTINY44A-CCUR is the closest documented drop-in alternative because it retains the ATtiny44A device identity and 15-UFBGA footprint while changing the packing format to tape-and-reel. Confirm the manufacturer pinout and ordering-code details before substituting it. Other ATtiny devices, including ATTINY24A and ATTINY84A variants, change available memory and should not be treated as automatic replacements.
What is the best Microchip equivalent for ATTINY44A-CCU?
The closest same-manufacturer equivalent is ATTINY44A-CCUR, which uses the same 15-UFBGA package and ATtiny44A device family while using reel packing rather than the target's tray format. Its electrical role remains that of a 20 MHz, 4 KB-flash AVR microcontroller. No verified cross-brand pin-compatible equivalent was identified for direct substitution.
Is ATTINY44A-CCU the same as ATTINY44A-CCUR?
ATTINY44A-CCU and ATTINY44A-CCUR refer to closely related ATtiny44A order codes with the same 15-UFBGA package. The practical distinction is packing: ATTINY44A-CCU is identified as a tray package, while the CCUR form supports reel-based production handling. Confirm the current manufacturer ordering information and pin compatibility before incorporating either code into a new design.
ATTINY44A-CCU vs ATTINY84A-CCUR - which is better for a compact controller?
ATTINY44A-CCU is preferable when 4 KB of flash and 256 B each of EEPROM and SRAM are sufficient. ATTINY84A-CCUR belongs to the larger ATtiny84A family and provides additional program-memory capacity, but it changes the device architecture and resource requirements rather than acting as an automatic pin-compatible replacement. Choose it only after checking its package, pinout, memory map, and firmware implications.
When should I choose ATTINY44A-CCU over ATTINY24A-CCU?
Choose ATTINY44A-CCU when the design benefits from 4 KB of flash rather than the smaller ATtiny24A memory configuration. Both parts appear in the same 15-UFBGA family context, but reduced program memory can constrain buffering, protocol handling, and feature growth. Treat the selection as a firmware-capacity decision and verify the complete pin and peripheral comparison before PCB release.
Is ATTINY44A-CCU suitable for low-power embedded control?
The ATTINY44A-CCU is suitable for focused low-power control because the ATtiny44A family uses picoPower technology and provides only 4 KB of flash, 256 B of SRAM, and 12 I/O lines. These resources support compact firmware rather than compute-heavy workloads. Use the manufacturer power-management and sleep-mode documentation to determine active and low-power current for the completed design.
Where can I buy ATTINY44A-CCU online?
Use the Request a Quote form on this page to request ATTINY44A-CCU availability, current lead time, and a formal quotation. The form allows buyers to specify quantity, target packaging, and delivery requirements without relying on a static price that may change. Confirm whether the required order is the tray-packed ATTINY44A-CCU rather than a different ATtiny44A packing code.
What is the price of ATTINY44A-CCU?
Current pricing for ATTINY44A-CCU should be obtained through the Request a Quote form on this page. The form can account for quantity, package format, and current component availability before returning a quotation. Do not substitute pricing for another ATtiny44A package code, because the CCU ordering suffix identifies a specific packing configuration.
What is the lead time and stock status for ATTINY44A-CCU?
Current stock and lead time for ATTINY44A-CCU should be requested through the Request a Quote form on this page. Include your required quantity, shipment destination, production schedule, and preferred tray packaging so procurement can confirm an appropriate delivery commitment. Avoid treating a catalog listing as confirmation that the exact ordering code is immediately available.

エンジニアリング参考データ: ATTINY44A-CCU — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose ATTINY44A-CCU when a compact, low-cost AVR controller needs a 20 MHz clock, 4 KB of ISP flash, 256 B of EEPROM, 256 B of SRAM, 12 I/O lines, and two PWM channels in a 3 x 3 mm 15-UFBGA package. It is especially suitable for focused sensing, lighting, accessory, and small industrial-control products where firmware size can remain below the available flash capacity. Choose ATTINY44A-CCUR when reel packing is required for automated assembly; it retains the same device configuration and footprint. ATTINY24A-family parts offer lower memory capacity and should be selected only for simpler firmware, while ATTINY84A-family parts provide more memory but require full resource and pin validation. No verified cross-brand drop-in equivalent is established, so a different-architecture MCU should be treated as a redesign unless its pinout and peripheral mapping are proven equivalent.

代替品との比較

パラメータ この製品 ATTINY44A-CCUR
Brand Microchip Technology Microchip Technology
Package 15-UFBGA (3 x 3 mm) 15-UFBGA (3 x 3 mm)
CPU Architecture 8-bit AVR RISC 8-bit AVR RISC
Maximum Clock Frequency 20 MHz 20 MHz
Flash Memory 4 KB (2K x 16) 4 KB (2K x 16)
EEPROM Memory 256 B 256 B
SRAM 256 B 256 B
General-Purpose I/O Lines 12 12
Working Registers 32 32
Timer and PWM 8-bit timer/counter with 2 PWM channels 8-bit timer/counter with 2 PWM channels
Operating Voltage Options 2.5 V, 3.3 V, and 5 V 2.5 V, 3.3 V, and 5 V
Packing Format Tray Tape-and-reel

主な差別化要因

  • Direct same-footprint ATtiny44A replacement (vs ATTINY44A-CCUR)
  • Compact 12-I/O AVR integration (vs ATTINY44A-CCUR)
  • Production packing flexibility (vs ATTINY44A-CCUR)

設計ノート

Treat the 15-UFBGA layout as a fine-pitch design rather than a generic BGA. Follow the manufacturer package drawing for pad dimensions, solder-mask clearance, and the exposed-pad connection. Route programming signals and clock lines away from sensitive analog inputs, and provide short ground connections around the device. Because the package is only 3 x 3 mm, inspection access for production testing should be designed before copper and mask artwork are frozen.

Place the required bypass capacitors adjacent to the supply and ground pins, with trace lengths kept as short as practical. Select capacitor voltage ratings and tolerance for the actual 2.5 V, 3.3 V, or 5 V rail, and account for regulator tolerance at the integrated circuit. If the board supports multiple voltage modes, verify the complete operating range against the manufacturer electrical characteristics rather than changing rails dynamically without checking frequency and peripheral limits.

Do not treat related ATtiny devices as automatic replacements. ATTINY24A-family parts have less program memory, while ATTINY84A-family parts have more, and other package suffixes use different physical footprints. The closest documented option is ATTINY44A-CCUR, which preserves the ATtiny44A configuration and 15-UFBGA footprint while changing packing. Validate memory size, pin assignments, programming interface, and package drawings before approving any substitution.

Preserve a dependable path for in-system programming even in a compact design. Provide accessible pads or a connector position that avoids assembly obstructions, keep the interface away from noisy power stages, and confirm signal levels against the selected operating voltage. Firmware should also be checked for clock initialization and brownout behavior because an incorrect startup configuration can make a board appear defective even when the microcontroller and package are functioning correctly.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

The ATTINY44A product documentation must be checked for the current material and environmental declarations applicable to the exact ordering code.

データ検証日: 2026-11-14 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

attiny44a datasheet attiny44a pinout attiny44a ssur attiny44a programming attiny44a ssn attiny44a pdf ATTINY44A-CCU datasheet ATTINY44A-CCU pinout ATTINY44A-CCU programming ATTINY44A-CCU equivalent ATTINY44A-CCU replacement ATTINY44A 15-UFBGA footprint

関連部品&用語

Microchip Technology ATTINY44A-CCU ATTINY44A ATTINY44A-CCUR ATTINY24A-CCU ATTINY84A-CCUR ATMEGA88A-CCU AVR AVR RISC architecture picoPower 8-bit microcontroller RISC-based microcontroller embedded controller semiconductor 15-UFBGA UFBGA package surface mount in-system programming ISP flash memory EEPROM SRAM general-purpose I/O PWM timer/counter working registers
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示