Microchip Technology

ATTINY84A-CCU - 20MHz 8-bit AVR MCU | Microchip Technology

MPN: ATTINY84A-CCU ✓ Nakahanda
15-UFBGA (3x3 mm) Package 20 MHz Speed 8 KB ISP Flash (4K x 16) Memory
MOQ: 1 |

ATTINY84A-CCU Ulas

The Microchip Technology ATTINY84A-CCU is an 8-bit AVR RISC-based microcontroller operating up to 20 MHz, with 8 KB of ISP flash memory, 512 bytes of EEPROM, 512 bytes of SRAM, and 12 general-purpose I/O lines. It is packaged in a 15-UFBGA (3x3 mm) package for compact embedded systems.

An 8-bit AVR microcontroller is a compact control IC that combines a processor core, nonvolatile program memory, data memory, timers, interrupt logic, and digital and analog peripherals on one device. The ATTINY84A belongs to Microchip's picoPower AVR family, a semiconductor hierarchy in which highly integrated 8-bit controllers suit compact sensing, control, and communication products.

Key features include an 8-channel 10-bit analog-to-digital converter, two timer/counters with 8-bit and 16-bit operation, two PWM channels per timer, and a programmable gain stage supporting 1x and 20x gain. The device also provides 32 general-purpose working registers, internal and external interrupts, and ISP programming support. Its 8 KB ISP flash provides sufficient program storage for compact embedded control logic.

The AVR architecture uses a RISC instruction set with 32 general-purpose working registers and an 8-bit data path. Two 10-bit ADC channels can operate in differential mode, while the integrated programmable gain stage offers a 20x option for low-level analog signals. These resources allow the microcontroller to combine sensor acquisition, digital control, and timing functions without requiring a separate analog front end.

Typical uses include industrial sensor nodes, compact instrumentation, LED and lighting controllers, building-control modules, small consumer products, and embedded Arduino-compatible designs. The 15-UFBGA package reduces board area, but it also makes careful PCB layout, pad inspection, and assembly planning important in production.

For a new design, verify the complete electrical limits and pin assignments in the manufacturer datasheet before layout release. Confirm regulator voltage, clock configuration, ADC reference, programming access, and decoupling requirements. If low-volume assembly or hand soldering is expected, compare the assembly implications of UFBGA with an available SOIC package before committing the design.

This page combines device specifications, application guidance, package information, compatibility analysis, and practical design considerations. It also distinguishes true drop-in replacements from related AVR devices that require a different package, firmware review, or board redesign.

Mga alternatibo na pwedeng ilagay na ATTINY84A-CCU — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

Wala ng magagamit na drop-in alternatibo para sa produkto na ito.

Hilingin ang Alternatibo

ATTINY84A-CCU Mga Pinakamataas na Rating at Electrical Characteristics

Microcontroller Type 8-bit AVR RISC microcontroller
Maksimum na Taktiko ng Oras 20 MHz
Program Memory 8 KB ISP Flash (4K x 16)
EEPROM 512 bytes
SRAM 512 bytes
General-Purpose I/O Lines 12
General-Purpose Working Registers 32
Timer/Counter Resolution 8-bit and 16-bit
PWM Channels 2 per timer/counter
ADC Resolution 10-bit
ADC Channel Count 8 channels
Programmable Gain Stage 1x and 20x gain
Differential ADC Channels 2
Hanay ng Temperature na Operasyon -40 C to +85 C
Temperature Grade Industrial grade
Packhaging 15-UFBGA (3x3 mm)
Uri ng Pagpapasok Surface mount
Programming Interface In-system programming (ISP)

Gabay sa Pin Configuration ng ATTINY84A-CCU 15-ufbga (3x3 mm)

Pin configuration para sa ATTINY84A-CCU (15-ufbga (3x3 mm) package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.

Pinout diagram ng 15-ufbga (3x3 mm) package para sa ATTINY84A-CCU

Wala ng detalyadong pinout data na magagamit para sa ATTINY84A-CCU.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

ATTINY84A-CCU ay nararapat para sa 6 aplikasyons: Industrial Sensor Conditioning, LED Lighting Control, Compact Instrumentation, Building Control Module, Battery-Powered IoT Node, Small Consumer Control Product.

🏭

Industrial Sensor Conditioning

The ATTINY84A-CCU fits compact sensor-conditioning modules that must acquire low-level analog signals and perform local control. Its 8-channel 10-bit ADC provides more sampling capability than a basic digital-only controller, while the programmable gain stage offers 1x and 20x options for scaling small sensor outputs. Two 20 MHz-capable timer/counters support timing and PWM functions without requiring a separate timer IC. The 12 I/O lines can connect sensors, status indicators, and a communications interface. Keep the analog input path away from switching edges, reference the ADC according to the manufacturer guidance, and reserve a clean ISP connection for firmware updates and production programming.

💡

LED Lighting Control

The ATTINY84A-CCU can act as the central controller in a multi-channel LED or lighting module because its timer/counters provide two PWM channels each. The device can therefore regulate brightness, implement fade sequences, and coordinate status feedback while retaining 12 general-purpose I/O lines for drivers and switches. A 20 MHz clock provides sufficient timing headroom for modest animation and update rates, while 8 KB of flash accommodates a focused control application. Place transistor or MOSFET drive stages away from the MCU and route high-current switching paths to minimize coupling into ADC or programming signals. Validate duty-cycle limits and thermal performance of the driver stage under worst-case lighting load.

🔧

Compact Instrumentation

The ATTINY84A-CCU is suitable for compact measurement instruments that combine an analog input, local display or switch interface, and a simple control algorithm. Its 8-channel 10-bit ADC can sample several sensor lines, and the differential-input capability can help reject common-mode noise when the signal source permits it. Thirty-two general-purpose working registers and 512 bytes of SRAM support compact measurement routines, while 512 bytes of EEPROM preserve calibration or configuration data when required. Establish a defined ADC reference strategy, add input filtering appropriate to the measured bandwidth, and keep calibration data away from noisy power sections. The UFBGA footprint supports compact instruments but warrants process control during reflow and inspection.

🏠

Building Control Module

The ATTINY84A-CCU can implement a compact building-control endpoint for occupancy, environmental, or contact sensing. Twelve I/O lines provide practical connectivity for digital inputs, alarm outputs, and status indicators, while the 8-channel 10-bit ADC supports potentiometer or environmental-sensor inputs. The -40 C to +85 C industrial temperature range aligns with many indoor and protected industrial environments, although the complete enclosure and power system still require validation. Use a dedicated supervisor or watchdog strategy for operation where a stalled controller could affect safety-related equipment. Keep mains or high-energy interfaces outside the MCU domain and provide defined isolation boundaries according to the final installation requirements.

🧩

Battery-Powered IoT Node

The ATTINY84A-CCU can support a small battery-powered IoT node when the node has modest processing and memory requirements. The picoPower AVR architecture is suited to low-power embedded operation, and 512 bytes of EEPROM can retain configuration information, while the 12 I/O lines can operate sensors and a low-speed communications interface. The 15-UFBGA package minimizes board area, which helps offset battery and enclosure constraints. Power performance should be evaluated at the module level because sleep current, active current, regulator efficiency, and wireless-module behavior determine battery life. Confirm wake-up behavior and peripheral shutdown requirements in the device documentation, and ensure radio transmission does not cause unacceptable supply noise or brownout events.

📱

Small Consumer Control Product

The ATTINY84A-CCU fits small consumer products requiring local logic, analog sensing, and compact packaging without a high-pin-count processor. Typical functions include button handling, motor or solenoid timing, status feedback, and product-state storage. Its 8 KB flash and 512-byte SRAM are sufficient for focused control firmware, while two timer/counters can generate PWM outputs for motors, indicators, or dimmable loads. Program the MCU through ISP and provide a recovery path for field failures. Before production release, test power-up behavior, brownout margins, actuator transients, and firmware behavior when loads switch rapidly. Because the package is a 15-UFBGA, validate stencil design, placement orientation, and inspection coverage with the selected assembly service.

What are the key specifications of ATTINY84A-CCU that engineers should know?
The ATTINY84A-CCU is an 8-bit AVR microcontroller rated up to 20 MHz, with 8 KB of ISP flash, 512 bytes of EEPROM, 512 bytes of SRAM, and 12 general-purpose I/O lines. According to the Microchip ATtiny84A product information, it also includes two 8-bit/16-bit timers, four PWM outputs, and an 8-channel 10-bit ADC. It is supplied in a compact 15-UFBGA (3x3 mm) package.
Where can I download the ATTINY84A-CCU datasheet PDF?
The ATTINY84A-CCU datasheet is accessible through the Microchip ATtiny84A product page at https://www.microchip.com/en-us/product/ATtiny84A. The document identifies the AVR architecture, memory organization, peripherals, electrical characteristics, package options, and programming information. Use the exact -CCU order code when checking package drawings and ordering information.
Where can I find the ATTINY84A-CCU pinout and package drawing?
The ATTINY84A-CCU pin assignment must be taken from the manufacturer datasheet because it is housed in the compact 15-UFBGA (3x3 mm) package. Confirm pad numbers, exposed-pad requirements, and recommended land patterns before releasing artwork. The product page at https://www.microchip.com/en-us/product/ATtiny84A provides access to the package documentation and device data.
How do I program an ATTINY84A-CCU?
The ATTINY84A-CCU is programmed through its in-system programming interface. The device provides 8 KB of ISP flash for firmware storage. According to Microchip's ATtiny84A documentation, ISP programming supports development and production workflows without removing the microcontroller from its circuit. Confirm the required clock, control-pin states, and programming voltage in the datasheet before connecting the programmer.
ATTINY84A vs ATTINY85: which microcontroller is better for a small control design?
The ATTINY84A-CCU is the better choice when a design needs more I/O and analog conversion capability than the ATtiny85 commonly provides. Microchip describes the ATtiny84A with 12 general-purpose I/O lines and an 8-channel 10-bit ADC, while the product snippet for the target identifies a 20 MHz maximum clock. The ATtiny85 remains attractive for simpler pin-constrained designs, but software and board requirements should be compared before substituting it.
Can ATTINY84A be used for Arduino-style embedded projects?
The ATTINY84A can be used for compact Arduino-style embedded projects when the board definition and firmware are configured for the device. Its 20 MHz clock, 8 KB program memory, 512-byte SRAM, and 12 I/O lines support small control tasks, while the 10-bit ADC supports analog input. The ATTINY84A-CCU's UFBGA package is compact but requires assembly and inspection processes suited to fine-pitch packages.
What is the best drop-in replacement for ATTINY84A-CCU?
No independently verified cross-manufacturer drop-in replacement was identified for the exact ATTINY84A-CCU configuration. A valid replacement must match the 15-UFBGA footprint, pin functions, power architecture, 20 MHz operating class, memory configuration, and peripheral requirements. Related ATtiny devices may differ in memory, package, I/O count, or ADC resources, so treat them as redesign candidates rather than unqualified drop-in substitutions.
What is the best Microchip equivalent for ATTINY84A-CCU?
The closest confirmed Microchip family member is the ATtiny84A itself, but no distinct pin-compatible 15-UFBGA replacement is confirmed by the available manufacturer and cross-reference material. When reviewing the Microchip cross-reference search, verify the exact package suffix, memory capacity, I/O mapping, ADC channels, and temperature grade. A related device should be selected only after those electrical and mechanical differences are reviewed.
Is there a drop-in cross-brand replacement for ATTINY84A-CCU?
No verified drop-in cross-brand replacement is established for the ATTINY84A-CCU. Cross-brand substitution is difficult because firmware, interrupt behavior, register compatibility, programming tools, and the 15-UFBGA land pattern must align. The available cross-reference results point to comparison tools rather than a specific qualified competitor, so the target device or a Microchip family member remains the defensible starting point for redesign review.
When should I choose ATTINY84A-CCU over a larger AVR microcontroller?
Choose the ATTINY84A-CCU when an 8-bit system can complete its control task within 8 KB of flash and 512 bytes of SRAM while benefiting from 12 I/O lines. Its 20 MHz clock and 10-bit ADC provide useful signal-processing and control capability without moving to a larger device. Select a larger microcontroller when firmware growth, RAM pressure, additional communication peripherals, or expanded pin count becomes the dominant constraint.
Is ATTINY84A-CCU suitable for industrial sensor and control modules?
The ATTINY84A-CCU is suitable for compact industrial control tasks requiring moderate processing speed and low-level analog acquisition. It operates across the stated -40 C to +85 C industrial temperature range and provides an 8-channel 10-bit ADC with 1x and 20x gain. For safety-critical or high-reliability equipment, qualify the complete power, sensor, communications, and watchdog design rather than relying on the MCU grade alone.
Where can I buy ATTINY84A-CCU and check current availability?
Use the Request a Quote form on this page to request ATTINY84A-CCU availability, lead time, and order confirmation. A distributor listing exists for the exact 15-UFBGA order code, but live inventory and commercial terms can change without notice. Provide the target quantity, assembly packaging requirements, and required delivery location with the quote request.
What is the price of ATTINY84A-CCU?
A current commercial quote is available through the Request a Quote form on this page. The structured listing data is updated independently of static page content so that the displayed commercial terms remain usable for purchasing decisions. Submit the required quantity and any reel, tray, or inspection requirements to obtain the applicable unit and volume-break terms.
What is the lead time for ATTINY84A-CCU?
The ATTINY84A-CCU lead time depends on current manufacturer and distribution inventory, package handling requirements, and order quantity. Submit a request through the Request a Quote form on this page with your target quantity and delivery schedule. The manufacturer lists the ATtiny84A family as in production, but a project-specific availability confirmation should govern production planning.
Is ATTINY84A-CCU in stock?
Use the Request a Quote form on this page for the current stock position of ATTINY84A-CCU. Marketplace inventory indications are transient and may refer to different fulfillment paths or package quantities. For a production commitment, request the exact order code, quantity, delivery location, and required traceability details with the quote.
What design constraints matter most for the ATTINY84A-CCU 15-UFBGA package?
The ATTINY84A-CCU requires careful treatment of its 15-UFBGA (3x3 mm) land pattern and exposed thermal features. Confirm pad geometry, solder-mask and paste design, via-in-pad policy, reflow profile, and X-ray inspection requirements with the assembly provider. Also preserve ISP access and place decoupling capacitors close to their supply pins to limit transient noise.

Impormasyon ng Talumpati sa Engineering for ATTINY84A-CCU — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose the ATTINY84A-CCU for compact embedded products that need an 8-bit AVR controller with 12 I/O lines, an 8-channel 10-bit ADC, PWM outputs, and a very small board footprint. It is particularly suitable for sensor modules, compact instruments, lighting controllers, and low-power IoT nodes where 8 KB of flash and 512 bytes of SRAM meet the firmware budget. Choose an SOIC ATtiny84A option when manual soldering, visual inspection, or broader assembly compatibility matters more than minimum PCB area. Consider the ATtiny85 when the design needs fewer I/O lines and simpler analog requirements. Do not select a cross-brand substitute merely from a similar clock rating; verify pin mapping, memory, interrupts, ADC behavior, programming tools, electrical limits, and the exact 15-UFBGA land pattern before treating any alternative as a drop-in replacement.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto
Package 15-UFBGA (3x3 mm)
Brand Microchip Technology
Architecture 8-bit AVR RISC
Maximum Clock Frequency 20 MHz
Program Memory 8 KB ISP Flash (4K x 16)
EEPROM 512 bytes
SRAM 512 bytes
General-Purpose I/O 12 lines
ADC 8 channels, 10-bit resolution
Timer/Counter Resources Two 8-bit/16-bit timers with two PWM channels each

Pangunahing mga Pagkakaiba

  • Higher I/O availability than a basic ATtiny85-class design (kumpara saATtiny85)
  • Integrated analog conversion with adjustable gain (kumpara saATtiny85)
  • Compact board footprint (kumpara saATtiny84A-SSU)

Talaan ng Disenyo

Use the manufacturer land pattern for the 15-UFBGA package and confirm exposed-pad, solder-mask, and paste requirements with the PCB and assembly vendors. The compact 3x3 mm footprint leaves little room for manual inspection or rework, so define the exposed-pad connection and via arrangement early. Keep programming test pads accessible without creating long antenna-like structures near sensitive analog inputs.

Separate analog inputs, ADC references, and programming signals from digital clocks and switching-node copper. Place input filtering capacitors at the relevant pins, route the ADC reference as a quiet net, and avoid sharing narrow return paths with loads that produce rapid current changes. The 10-bit ADC and selectable 20x gain amplify the importance of trace routing because interference at the input can affect the measured result.

Do not assume that the 15-UFBGA footprint is interchangeable with SOIC, QFN, or another UFBGA variant. The -CCU order code identifies a specific compact package configuration, and firmware compatibility alone does not establish mechanical drop-in compatibility. Verify every pad assignment, power requirement, clock option, programming signal, and package drawing against the exact device documentation before approving a PCB or replacement order.

Plan the power tree around both average and transient demand. Decoupling must be placed directly across the appropriate supply pins, while the selected regulator must tolerate the load steps created by ADC sampling, communications activity, and external switching devices. Because the MCU uses 8 KB of flash and 512 bytes of SRAM, power integrity and brownout behavior can determine whether an otherwise correct control design remains stable under worst-case activity.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

Compliance attributes are not stated for the exact ATTINY84A-CCU order code and remain unknown rather than inferred from the broader ATtiny84A family.

Data napatotohanan sa: 2026-11-19 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

attiny84a ccu attiny84a pinout attiny84a datasheet attiny84a vs attiny85 attiny84a ssu attiny84a ssf attiny84a programming attiny84a ssur attiny84a arduino ATTINY84A-CCU price ATTINY84A-CCU replacement ATTINY84A-CCU cross reference

Mga kaugnay na Mga Komponente at mga Tuntunin

Microchip Technology ATTINY84A-CCU ATtiny84A ATtiny85 8-bit AVR microcontroller TinyAVR picoPower AVR RISC architecture embedded microcontroller semiconductor In-system programming ISP flash memory EEPROM SRAM 10-bit ADC differential ADC input programmable gain stage PWM timer/counter 15-UFBGA QFN package family surface-mount technology industrial temperature grade
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ