ATTINY84A-CCU - 20MHz 8-bit AVR MCU | Microchip Technology
MPN: ATTINY84A-CCU ✓ فعالATTINY84A-CCU نمای کلی
An 8-bit AVR microcontroller is a compact control IC that combines a processor core, nonvolatile program memory, data memory, timers, interrupt logic, and digital and analog peripherals on one device. The ATTINY84A belongs to Microchip's picoPower AVR family, a semiconductor hierarchy in which highly integrated 8-bit controllers suit compact sensing, control, and communication products.
Key features include an 8-channel 10-bit analog-to-digital converter, two timer/counters with 8-bit and 16-bit operation, two PWM channels per timer, and a programmable gain stage supporting 1x and 20x gain. The device also provides 32 general-purpose working registers, internal and external interrupts, and ISP programming support. Its 8 KB ISP flash provides sufficient program storage for compact embedded control logic.
The AVR architecture uses a RISC instruction set with 32 general-purpose working registers and an 8-bit data path. Two 10-bit ADC channels can operate in differential mode, while the integrated programmable gain stage offers a 20x option for low-level analog signals. These resources allow the microcontroller to combine sensor acquisition, digital control, and timing functions without requiring a separate analog front end.
Typical uses include industrial sensor nodes, compact instrumentation, LED and lighting controllers, building-control modules, small consumer products, and embedded Arduino-compatible designs. The 15-UFBGA package reduces board area, but it also makes careful PCB layout, pad inspection, and assembly planning important in production.
For a new design, verify the complete electrical limits and pin assignments in the manufacturer datasheet before layout release. Confirm regulator voltage, clock configuration, ADC reference, programming access, and decoupling requirements. If low-volume assembly or hand soldering is expected, compare the assembly implications of UFBGA with an available SOIC package before committing the design.
This page combines device specifications, application guidance, package information, compatibility analysis, and practical design considerations. It also distinguishes true drop-in replacements from related AVR devices that require a different package, firmware review, or board redesign.
جایگزینهای drop-in برای ATTINY84A-CCU — همان پکیج، سازگار پینبهپین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
هیچ جایگزین مستقیمی برای این محصول موجود نیست.
درخواست جایگزینATTINY84A-CCU حداکثر مقادیر مجاز و مشخصات الکتریکی
| Microcontroller Type | 8-bit AVR RISC microcontroller |
| حداکثر فرکانس کلاک | 20 MHz |
| Program Memory | 8 KB ISP Flash (4K x 16) |
| EEPROM | 512 bytes |
| SRAM | 512 bytes |
| General-Purpose I/O Lines | 12 |
| General-Purpose Working Registers | 32 |
| Timer/Counter Resolution | 8-bit and 16-bit |
| PWM Channels | 2 per timer/counter |
| ADC Resolution | 10-bit |
| ADC Channel Count | 8 channels |
| Programmable Gain Stage | 1x and 20x gain |
| Differential ADC Channels | 2 |
| محدوده دمای کاری | -40 C to +85 C |
| Temperature Grade | Industrial grade |
| بستهبندی | 15-UFBGA (3x3 mm) |
| نوع نصب | Surface mount |
| Programming Interface | In-system programming (ISP) |
راهنمای پیکربندی پین ATTINY84A-CCU 15-ufbga (3x3 mm)
پیکربندی پین برای ATTINY84A-CCU (پکیج 15-ufbga (3x3 mm)). این IC دیجیتال شامل GPIO، رابطهای ارتباطی (UART، SPI، I2C) و پینهای تغذیه است. برای عملکردهای جایگزین پین و گزینههای پیکربندی به دیتاشیت سازنده مراجعه کنید. ضروری برای طراحی سیستمهای نهفته و چیدمان PCB.
داده پینآوت تفصیلی موجود نیست برای ATTINY84A-CCU.
به دیتاشیت برای پیکربندی کامل پینها.
کاربردهای معمول
ATTINY84A-CCU مناسب است برای 6 کاربردs: Industrial Sensor Conditioning, LED Lighting Control, Compact Instrumentation, Building Control Module, Battery-Powered IoT Node, Small Consumer Control Product.
Industrial Sensor Conditioning
The ATTINY84A-CCU fits compact sensor-conditioning modules that must acquire low-level analog signals and perform local control. Its 8-channel 10-bit ADC provides more sampling capability than a basic digital-only controller, while the programmable gain stage offers 1x and 20x options for scaling small sensor outputs. Two 20 MHz-capable timer/counters support timing and PWM functions without requiring a separate timer IC. The 12 I/O lines can connect sensors, status indicators, and a communications interface. Keep the analog input path away from switching edges, reference the ADC according to the manufacturer guidance, and reserve a clean ISP connection for firmware updates and production programming.
پیشنهادی
LED Lighting Control
The ATTINY84A-CCU can act as the central controller in a multi-channel LED or lighting module because its timer/counters provide two PWM channels each. The device can therefore regulate brightness, implement fade sequences, and coordinate status feedback while retaining 12 general-purpose I/O lines for drivers and switches. A 20 MHz clock provides sufficient timing headroom for modest animation and update rates, while 8 KB of flash accommodates a focused control application. Place transistor or MOSFET drive stages away from the MCU and route high-current switching paths to minimize coupling into ADC or programming signals. Validate duty-cycle limits and thermal performance of the driver stage under worst-case lighting load.
پیشنهادی
Compact Instrumentation
The ATTINY84A-CCU is suitable for compact measurement instruments that combine an analog input, local display or switch interface, and a simple control algorithm. Its 8-channel 10-bit ADC can sample several sensor lines, and the differential-input capability can help reject common-mode noise when the signal source permits it. Thirty-two general-purpose working registers and 512 bytes of SRAM support compact measurement routines, while 512 bytes of EEPROM preserve calibration or configuration data when required. Establish a defined ADC reference strategy, add input filtering appropriate to the measured bandwidth, and keep calibration data away from noisy power sections. The UFBGA footprint supports compact instruments but warrants process control during reflow and inspection.
پیشنهادی
Building Control Module
The ATTINY84A-CCU can implement a compact building-control endpoint for occupancy, environmental, or contact sensing. Twelve I/O lines provide practical connectivity for digital inputs, alarm outputs, and status indicators, while the 8-channel 10-bit ADC supports potentiometer or environmental-sensor inputs. The -40 C to +85 C industrial temperature range aligns with many indoor and protected industrial environments, although the complete enclosure and power system still require validation. Use a dedicated supervisor or watchdog strategy for operation where a stalled controller could affect safety-related equipment. Keep mains or high-energy interfaces outside the MCU domain and provide defined isolation boundaries according to the final installation requirements.
پیشنهادی
Battery-Powered IoT Node
The ATTINY84A-CCU can support a small battery-powered IoT node when the node has modest processing and memory requirements. The picoPower AVR architecture is suited to low-power embedded operation, and 512 bytes of EEPROM can retain configuration information, while the 12 I/O lines can operate sensors and a low-speed communications interface. The 15-UFBGA package minimizes board area, which helps offset battery and enclosure constraints. Power performance should be evaluated at the module level because sleep current, active current, regulator efficiency, and wireless-module behavior determine battery life. Confirm wake-up behavior and peripheral shutdown requirements in the device documentation, and ensure radio transmission does not cause unacceptable supply noise or brownout events.
پیشنهادی
Small Consumer Control Product
The ATTINY84A-CCU fits small consumer products requiring local logic, analog sensing, and compact packaging without a high-pin-count processor. Typical functions include button handling, motor or solenoid timing, status feedback, and product-state storage. Its 8 KB flash and 512-byte SRAM are sufficient for focused control firmware, while two timer/counters can generate PWM outputs for motors, indicators, or dimmable loads. Program the MCU through ISP and provide a recovery path for field failures. Before production release, test power-up behavior, brownout margins, actuator transients, and firmware behavior when loads switch rapidly. Because the package is a 15-UFBGA, validate stencil design, placement orientation, and inspection coverage with the selected assembly service.
پیشنهادی
خلاصه محصولات پیشنهادی
دادههای مرجع مهندسی برای ATTINY84A-CCU — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزینها
| پارامتر | این محصول |
|---|---|
| Package | 15-UFBGA (3x3 mm) |
| Brand | Microchip Technology |
| Architecture | 8-bit AVR RISC |
| Maximum Clock Frequency | 20 MHz |
| Program Memory | 8 KB ISP Flash (4K x 16) |
| EEPROM | 512 bytes |
| SRAM | 512 bytes |
| General-Purpose I/O | 12 lines |
| ADC | 8 channels, 10-bit resolution |
| Timer/Counter Resources | Two 8-bit/16-bit timers with two PWM channels each |
تفاوتهای کلیدی
- Higher I/O availability than a basic ATtiny85-class design (در مقابلATtiny85)
- Integrated analog conversion with adjustable gain (در مقابلATtiny85)
- Compact board footprint (در مقابلATtiny84A-SSU)
یادداشتهای طراحی
Use the manufacturer land pattern for the 15-UFBGA package and confirm exposed-pad, solder-mask, and paste requirements with the PCB and assembly vendors. The compact 3x3 mm footprint leaves little room for manual inspection or rework, so define the exposed-pad connection and via arrangement early. Keep programming test pads accessible without creating long antenna-like structures near sensitive analog inputs.
Separate analog inputs, ADC references, and programming signals from digital clocks and switching-node copper. Place input filtering capacitors at the relevant pins, route the ADC reference as a quiet net, and avoid sharing narrow return paths with loads that produce rapid current changes. The 10-bit ADC and selectable 20x gain amplify the importance of trace routing because interference at the input can affect the measured result.
Do not assume that the 15-UFBGA footprint is interchangeable with SOIC, QFN, or another UFBGA variant. The -CCU order code identifies a specific compact package configuration, and firmware compatibility alone does not establish mechanical drop-in compatibility. Verify every pad assignment, power requirement, clock option, programming signal, and package drawing against the exact device documentation before approving a PCB or replacement order.
Plan the power tree around both average and transient demand. Decoupling must be placed directly across the appropriate supply pins, while the selected regulator must tolerate the load steps created by ADC sampling, communications activity, and external switching devices. Because the MCU uses 8 KB of flash and 512 bytes of SRAM, power integrity and brownout behavior can determine whether an otherwise correct control design remains stable under worst-case activity.
اطلاعات انطباق
Compliance attributes are not stated for the exact ATTINY84A-CCU order code and remain unknown rather than inferred from the broader ATtiny84A family.