Microchip Technology

ATXMEGA64A1-C7U - 32MHz 64KB Flash AVR MCU | Microchip

MPN: ATXMEGA64A1-C7U ✗ Tapus ng Buhay
1.6 V to 3.6 V Vdss 100-VFBGA (7 x 7 mm) Package 32 MHz Speed 64 KB Memory
MOQ: 1 |

ATXMEGA64A1-C7U Ulas

The Microchip Technology ATXMEGA64A1-C7U is an 8/16-bit AVR XMEGA A1 microcontroller with a 32 MHz operating frequency, 64 KB self-programming Flash memory, 4 KB SRAM, 2 KB EEPROM, and a 100-VFBGA 7 x 7 mm package. The device also provides an external bus interface, a four-channel DMA controller, an eight-channel event system, a programmable multilevel interrupt controller, 78 general-purpose I/O lines, and a 16-bit real-time counter.

An AVR XMEGA microcontroller belongs to the 8/16-bit RISC microcontroller category and combines a high-performance AVR core with advanced peripherals on a single mixed-signal device. The XMEGA A1 family is designed for embedded systems that need more than basic digital control, including deterministic data movement, event-driven peripheral coordination, high-resolution timing, and flexible communications through the external bus interface. Its architecture sits below 32-bit microcontrollers in processing width but can provide high peripheral integration for industrial, communications, and control applications.

The ATXMEGA64A1 family supports in-system programmable Flash with read-while-write operation, internal EEPROM, and internal SRAM. Its eight flexible 16-bit timer/counter channels support compare and PWM functions, while the event system can connect peripherals without requiring continuous CPU intervention. Four-channel DMA reduces the processing burden associated with data movement, and the programmable multilevel interrupt controller helps organize real-time event handling. The 78 available I/O lines also provide substantial interface density despite the compact 7 x 7 mm package.

The 32 MHz AVR core operates as an 8/16-bit processor, allowing efficient access to 16-bit data while retaining compatibility with 8-bit peripherals and general-purpose I/O. The external bus interface can connect the controller to additional memory or peripheral devices, while the DMA and event system support partitioned real-time architectures. These resources make the MCU suitable for designs where deterministic response, concurrency, and peripheral integration matter more than the broader software ecosystem of a general-purpose 32-bit processor.

Typical uses include industrial data acquisition, communications equipment, sensor hubs, embedded control panels, and compact control systems. Its 64 KB Flash capacity supports moderate embedded applications, while 2 KB EEPROM provides nonvolatile parameter storage and 4 KB SRAM supports working data. In a data-acquisition design, DMA can transfer samples while the event system and timers coordinate acquisition timing. In a communications controller, the external bus interface can connect memory or peripherals while the CPU manages the protocol stack.

Designers should confirm pin multiplexing, ball assignments, power requirements, clock options, and peripheral conflicts using the manufacturer datasheet and package information before committing the PCB layout. The 100-VFBGA package also demands assembly capability for inspection, rework, and reliable solder-joint inspection. For new production designs, the manufacturer lists the standard ATxmega64A1 as not recommended for new designs and directs users toward ATxmega64A1U.

This product page consolidates the verified device description, manufacturer and distributor references, lifecycle guidance, package details, and design-focused distinctions between the ATXMEGA64A1-C7U and the recommended ATXMEGA64A1U family, providing practical information for engineering review and sourcing decisions.

Mga alternatibo na pwedeng ilagay na ATXMEGA64A1-C7U — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

ATXMEGA64A1U-C7U

✅ Drop-In
📦 100-VFBGA (7 x 7 mm)
Recommended successor generation with the same 64 KB Flash capacity and 100-VFBGA package; lifecycle and detailed electrical differences require manufacturer verification.

📋 Alternatibo na Reference (hindi sa katalogo)

ATXMEGA64A1-C7U Mga Pinakamataas na Rating at Electrical Characteristics

Product Type 8/16-bit RISC Flash Microcontroller
Device Family AVR XMEGA A1
Maksimum na Taktiko ng Oras 32 MHz
Flash Memory 64 KB
Flash Organization 32K x 16
Boot Code Section 4 KB
EEPROM 2 KB
SRAM 4 KB
DMA Channels 4
Event System Channels 8
General-Purpose I/O Lines 78
Timer/Counters 8 flexible 16-bit timer/counter channels
Real-Time Counter 16-bit
Operating Voltage Range 1.6 V to 3.6 V
Packhaging 100-VFBGA (7 x 7 mm)
Uri ng Pagpapasok Surface Mount
Programmable Multilevel Interrupt Controller Yes
External Bus Interface Yes
In-System Programmable Flash Yes
Read-While-Write Yes

Gabay sa Pin Configuration ng ATXMEGA64A1-C7U 100-vfbga (7 x 7 mm)

Pin configuration para sa ATXMEGA64A1-C7U (100-vfbga (7 x 7 mm) package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.

Pinout diagram ng 100-vfbga (7 x 7 mm) package para sa ATXMEGA64A1-C7U

Wala ng detalyadong pinout data na magagamit para sa ATXMEGA64A1-C7U.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

ATXMEGA64A1-C7U ay nararapat para sa 6 aplikasyons: Industrial Data Acquisition, Communications Controller, Precision Timing and PWM Control, Sensor Hub and Edge Node, External Bus Expansion, Compact Embedded Control Panel.

🏭

Industrial Data Acquisition

The ATXMEGA64A1-C7U fits compact acquisition systems because its four-channel DMA controller can transfer sampled data while reducing CPU involvement. Its eight 16-bit timer/counter channels support trigger timing, capture, compare, and PWM-oriented functions, while the programmable multilevel interrupt controller helps prioritize control and acquisition events. The 78 available I/O lines allow multiple sensors, conditioning circuits, and communication interfaces to share one controller. With 64 KB Flash, 4 KB SRAM, and 2 KB EEPROM, the device can host acquisition logic, configuration storage, and a modest protocol stack within a 7 x 7 mm 100-VFBGA footprint.

🌐

Communications Controller

The ATXMEGA64A1-C7U can serve as a protocol and interface controller because it combines a 32 MHz 8/16-bit AVR core with an external bus interface and 78 general-purpose I/O lines. The external bus interface supports connection to additional memory or peripheral devices, while DMA can move blocks between memory and peripherals without requiring the processor to perform every byte transfer. Its 64 KB Flash accommodates protocol state machines and firmware, 2 KB EEPROM preserves configuration parameters, and 4 KB SRAM supports active communication buffers. The compact VFBGA package also helps minimize board area in communications modules.

⚡

Precision Timing and PWM Control

The ATXMEGA64A1-C7U is well suited to timing-sensitive control because it provides eight flexible 16-bit timer/counter channels with compare and PWM capabilities. Multiple timers can establish independent periods, capture input transitions, and generate precision control outputs, while the eight-channel event system can connect peripheral events directly. This architecture reduces the processing delay that would occur when every timing relationship is handled through polling. The device's 78 I/O lines leave sufficient external connectivity for sensors, gate drivers, status inputs, and coordinated outputs within a compact embedded-control design.

🧩

Sensor Hub and Edge Node

The ATXMEGA64A1-C7U works as a sensor-hub controller when a design needs many discrete inputs, local event coordination, and modest onboard intelligence. Its 78 general-purpose I/O lines can connect digital sensors, switches, and discrete interface signals, while the four-channel DMA controller is useful for transferring peripheral data efficiently. The 2 KB EEPROM can retain calibration values or operating parameters, and the 64 KB Flash is sufficient for a focused embedded application. Its 32 MHz clock and integrated event system support responsive sampling without requiring a larger processor in space-constrained edge nodes.

🖥️

External Bus Expansion

The ATXMEGA64A1-C7U is appropriate for compact embedded systems that need to extend a controller with external memory or bus-connected peripherals. Its dedicated external bus interface can organize access to additional devices, while four-channel DMA reduces the CPU overhead of repeated transfers. Eight 16-bit timer/counter channels and the programmable event system allow the bus master function to coexist with periodic measurement, PWM generation, and asynchronous event handling. The 64 KB embedded Flash remains available for the main application, while 4 KB SRAM can be used as a working region for buffering and transfer staging.

🔧

Compact Embedded Control Panel

The ATXMEGA64A1-C7U can integrate user controls and status feedback in a compact embedded control panel. Its 78 I/O lines support displays, indicators, switches, encoders, and communication signals, while eight 16-bit timer/counter channels assist with periodic scanning, debouncing strategies, and output timing. The programmable multilevel interrupt controller helps the firmware prioritize button, timer, communication, and system events. Storage is balanced for panel-oriented firmware: 64 KB for application code, 4 KB SRAM for active state, and 2 KB EEPROM for retained user settings or calibration data.

Buod ng mga Inirekomendang Produkto

ATXMEGA64A1-C7U Microchip Technology Ginagamit sa: Industrial Data Acquisition, Communications Controller, Precision Timing and PWM Control, Sensor Hub and Edge Node, External Bus Expansion, Compact Embedded Control Panel ATXMEGA64A1U-C7U Recommended successor for new acquisition designs Ginagamit sa: Industrial Data Acquisition, Communications Controller, Precision Timing and PWM Control, Sensor Hub and Edge Node, External Bus Expansion, Compact Embedded Control Panel
What are the key specifications of ATXMEGA64A1-C7U that engineers should know?
The ATXMEGA64A1-C7U combines a 32 MHz 8/16-bit AVR core with 64 KB Flash, 4 KB SRAM, 2 KB EEPROM, 78 I/O lines, four DMA channels, an eight-channel event system, and eight 16-bit timer/counter channels. According to the Microchip ATxmega64A1 and ATxmega128A1 datasheet, the device also provides an external bus interface and programmable multilevel interrupt controller. It is packaged in a 100-VFBGA measuring 7 x 7 mm and operates from 1.6 V to 3.6 V.
Where can I download the ATXMEGA64A1-C7U datasheet PDF?
The manufacturer-hosted ATxmega64A1/128A1 datasheet PDF is available from Microchip Technology and covers the ATXMEGA64A1-C7U family. The document describes the 32 MHz AVR architecture, 64 KB Flash, 2 KB EEPROM, 4 KB SRAM, DMA, event system, timers, external bus interface, electrical characteristics, and package information. Use the Microchip PDF for design decisions, programming, pin assignments, and PCB implementation rather than relying on distributor summaries alone.
Where can I find the ATXMEGA64A1-C7U pinout and 100-VFBGA ball map?
The ATXMEGA64A1-C7U pinout and 100-VFBGA ball map are found in the pin-assignment section of the manufacturer ATxmega64A1 and ATxmega128A1 datasheet. The device uses a 100-VFBGA package on a 7 x 7 mm substrate. Check the pin-description table and package drawings before assigning power, ground, communication, debug, and peripheral signals because many alternate functions share package balls.
Is the ATXMEGA64A1-C7U still suitable for new designs?
The ATXMEGA64A1-C7U is not recommended for new designs because Microchip Technology identifies the standard ATxmega64A1 family as not recommended for new designs. The manufacturer recommends ATxmega64A1U for new projects. Existing designs can continue to use the established C7U ordering information, but new engineering should evaluate the A1U family's current lifecycle, availability, software support, and qualification requirements.
What is the difference between ATXMEGA64A1-C7U and ATXMEGA64A1U-C7U?
The principal documented difference is the A1 versus A1U device generation and the manufacturer's lifecycle recommendation to use ATxmega64A1U. Both are identified as 32 MHz AVR XMEGA A1-family controllers with 64 KB Flash in 100-VFBGA packages. The exact feature and qualification deltas must be checked in the current manufacturer documentation before treating one as a drop-in replacement for an existing assembly.
Can ATXMEGA64A1U-C7U replace ATXMEGA64A1-C7U on the same PCB?
ATXMEGA64A1U-C7U is the closest documented same-package candidate because both parts are identified as 100-VFBGA 7 x 7 mm devices with 64 KB Flash and a 32 MHz operating frequency. However, a production substitution still requires verification of ball assignments, electrical limits, clock behavior, peripheral configuration, qualification, and software compatibility against the manufacturer documentation. Treat the A1U as the recommended successor candidate, not as an automatically approved source change.
What is the best drop-in replacement for ATXMEGA64A1-C7U?
ATXMEGA64A1U-C7U is the best-supported replacement candidate because Microchip explicitly directs users from ATxmega64A1 to ATxmega64A1U, and both identifiers correspond to 100-VFBGA 7 x 7 mm packages with 64 KB Flash. Before using it as a drop-in replacement, verify every ball function, operating limit, startup sequence, and peripheral feature in the manufacturer documentation. No other pin-compatible replacement with comparable published details was identified.
When should I choose ATXMEGA64A1-C7U over ATXMEGA64A1U-C7U?
Choose ATXMEGA64A1-C7U when maintaining an existing qualified or production design that is specifically built around the established A1 device and its characterized behavior. For new designs, choose ATXMEGA64A1U-C7U because Microchip marks the standard A1 family as not recommended for new designs. The decision should account for software support, lifecycle continuity, qualification, and any changes required by the current A1U documentation.
Is ATXMEGA64A1-C7U suitable for industrial data-acquisition systems?
The ATXMEGA64A1-C7U is suitable for compact data-acquisition systems that benefit from its four-channel DMA controller, eight-channel event system, eight 16-bit timer/counter channels, 78 I/O lines, and 64 KB Flash. DMA can move sampled data with reduced CPU involvement, while timers and the event system can coordinate deterministic acquisition timing. Its 1.6 V to 3.6 V operating range and 100-VFBGA package make careful power and layout design essential.
How much power and thermal design is required for ATXMEGA64A1-C7U?
ATXMEGA64A1-C7U power use depends on clock frequency, active peripherals, I/O loading, and operating voltage, so the manufacturer datasheet should be used for design-specific calculations. Provide a stable supply within the 1.6 V to 3.6 V range and minimize high-current return paths through the VFBGA power and ground balls. Also account for package heat spreading and PCB copper area when operating continuously at 32 MHz.
Where can I buy ATXMEGA64A1-C7U and check its current price?
Use the Request a Quote form on this page to request the current price, stock position, minimum order quantity, and lead time for ATXMEGA64A1-C7U. Quote-based purchasing is appropriate for a lifecycle-limited microcontroller, especially when production quantities and date codes must be controlled. The part is listed in a 100-VFBGA package, so availability should be confirmed for the exact C7U ordering code rather than an A1U successor.
What is the lead time for ATXMEGA64A1-C7U?
The current lead time for ATXMEGA64A1-C7U should be requested through the Request a Quote form on this page, including the required quantity, target delivery date, and acceptable date-code policy. Because Microchip Technology marks the standard ATxmega64A1 family as not recommended for new designs, supply continuity and allocation may differ from the recommended ATxmega64A1U family. Confirming lot traceability before shipment is important for production planning.
Is ATXMEGA64A1-C7U in stock?
Current stock for ATXMEGA64A1-C7U should be confirmed through the Request a Quote form on this page. Submit the exact quantity, shipment destination, required packaging form, and any date-code restrictions. A distributor search result showing the orderable part does not by itself establish the quantity available for a particular production allocation. The manufacturer’s not-for-new-designs status makes lot availability particularly important for maintenance builds.
What programming tools are suitable for ATXMEGA64A1-C7U?
ATXMEGA64A1-C7U firmware can be programmed through compatible AVR/XMEGA programming tools that support the device’s in-system programmable Flash and bootloader mechanisms. The manufacturer documentation provides the supported programming, boot, clock, and interface details needed to select a compatible toolchain. Production designs should also include the programming connector, voltage levels, reset behavior, and write-protection requirements described in the application guidance.
What can replace ATXMEGA64A1-C7U?
ATXMEGA64A1U-C7U is the most direct documented replacement candidate because it uses the same 100-VFBGA format and remains in the 64 KB, 32 MHz XMEGA A1 family. Confirm pin and electrical compatibility before committing because lifecycle and feature changes can affect an existing design. No cross-brand 100-VFBGA pin-compatible part with sufficiently documented electrical and peripheral equivalence was established from the available manufacturer and distributor information.
Is ATXMEGA64A1-C7U the same as ATXMEGA128A1U-C7U?
No. ATXMEGA64A1-C7U has 64 KB Flash, while ATXMEGA128A1U-C7U is documented with 128 KB Flash, making it a different memory-capacity device rather than an equivalent drop-in replacement. Both are associated with 100-VFBGA packaging, but package similarity alone does not establish electrical, pinout, firmware, or application compatibility. Use ATXMEGA64A1U-C7U for the closest same-capacity successor evaluation.

Impormasyon ng Talumpati sa Engineering for ATXMEGA64A1-C7U — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose ATXMEGA64A1-C7U for an existing design whose PCB, firmware, qualification, and supply plan already target the established XMEGA A1 device. Its 32 MHz core, four-channel DMA controller, eight-channel event system, eight 16-bit timer/counter channels, 64 KB Flash, 4 KB SRAM, and 2 KB EEPROM make it effective for deterministic acquisition, communications, timing, and compact embedded-control designs. Choose ATXMEGA64A1U-C7U for new development because it is the manufacturer-recommended successor and retains the same package format, clock rate, and Flash capacity shown in the product references. Validate that transition against electrical limits, ball assignments, peripherals, and qualification requirements. ATXMEGA128A1U-C7U is not a memory-equivalent substitute because its 128 KB Flash is twice that of the target. ATXMEGA64A1-CUR should not be selected as an alternative solely from its similar identifier; its ordering code and package details require separate verification.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto ATXMEGA64A1U-C7U
Package 100-VFBGA (7 x 7 mm) 100-VFBGA (7 x 7 mm)
Brand Microchip Technology Microchip Technology
Device Family AVR XMEGA A1 AVR XMEGA A1U
Maximum Clock Frequency 32 MHz 32 MHz
Flash Memory 64 KB (32K x 16) 64 KB (32K x 16)
EEPROM 2 KB 2 KB
SRAM 4 KB 4 KB
Operating Voltage Range 1.6 V to 3.6 V 1.6 V to 3.6 V
Lifecycle Recommendation Not recommended for new designs Recommended successor family
External Bus Interface Yes Yes
DMA Channels 4 4
Event System Channels 8 8

Pangunahing mga Pagkakaiba

  • Manufacturer-directed lifecycle path (kumpara saATXMEGA64A1U-C7U)
  • Same-package candidate with matching core capacity (kumpara saATXMEGA64A1U-C7U)
  • Integrated real-time peripheral set (kumpara saATXMEGA128A1U-C7U)

Talaan ng Disenyo

Design the 100-VFBGA footprint from the manufacturer package drawing and route every power and ground ball according to the datasheet recommendations. The 7 x 7 mm package has a dense ball pitch, so assembly capability, solder-paste volume, stencil design, and X-ray inspection requirements should be confirmed before release. Preserve the documented keep-out and thermal-via recommendations around exposed thermal features.

Provide a stable supply within the documented 1.6 V to 3.6 V operating range and follow the manufacturer’s recommended decoupling network. Place high-frequency bypass capacitance close to the relevant power balls and keep return current paths short to reduce voltage droop during 32 MHz operation. Validate the rail during startup and worst-case peripheral activity rather than assuming nominal supply voltage alone is sufficient.

Map the programmable event system, DMA channels, timers, external bus, and general-purpose I/O before assigning package balls. Several functions can have alternate peripheral connections, and incorrect multiplexing can create contention or unavailable features. Keep external-bus and high-speed signal routing short, use controlled-impedance routing where required, and cross-check the final ball assignments against the manufacturer pin-description table.

Do not assume that a similarly packaged XMEGA device is an automatic drop-in replacement. Verify power-ball placement, I/O direction, analog-capable pins, reset behavior, clock configuration, peripheral multiplexing, bootloader operation, and absolute maximum ratings. For ATXMEGA64A1-C7U specifically, evaluate ATXMEGA64A1U-C7U through manufacturer documentation and application validation before changing an approved production design.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status was identified for the exact ordering code. The manufacturer marks the standard ATxmega64A1 family as not recommended for new designs and recommends ATxmega64A1U.

Data napatotohanan sa: 2026-11-10 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

ATXMEGA64A1-C7U datasheet ATXMEGA64A1-C7U pinout ATXMEGA64A1-C7U datasheet pdf ATXMEGA64A1-C7U replacement ATXMEGA64A1-C7U equivalent ATXMEGA64A1-C7U vs ATXMEGA64A1U-C7U ATXMEGA64A1-C7U price ATXMEGA64A1-C7U stock Microchip ATXMEGA64A1-C7U ATXMEGA64A1-C7U 100 VFBGA ATXMEGA64A1-C7U application circuit ATXMEGA64A1-C7U 32MHz 64KB Flash

Mga kaugnay na Mga Komponente at mga Tuntunin

Microchip Technology ATXMEGA64A1-C7U ATXMEGA64A1U-C7U ATxmega64A1 ATxmega64A1U AVR AVR XMEGA A1 8/16-bit microcontroller RISC microcontroller embedded microcontroller Integrated Circuits > Microcontrollers 32 MHz clock 64 KB Flash 4 KB SRAM 2 KB EEPROM four-channel DMA controller eight-channel event system programmable multilevel interrupt controller external bus interface 16-bit real-time counter 8/16-bit timer/counter 100-VFBGA VFBGA package surface-mount package in-system programming read-while-write 1.6 V to 3.6 V operating voltage
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ