ATXMEGA64A1-C7U - 32MHz 64KB Flash AVR MCU | Microchip
MPN: ATXMEGA64A1-C7U ✗ Cuối đờiATXMEGA64A1-C7U Tóm tắt
An AVR XMEGA microcontroller belongs to the 8/16-bit RISC microcontroller category and combines a high-performance AVR core with advanced peripherals on a single mixed-signal device. The XMEGA A1 family is designed for embedded systems that need more than basic digital control, including deterministic data movement, event-driven peripheral coordination, high-resolution timing, and flexible communications through the external bus interface. Its architecture sits below 32-bit microcontrollers in processing width but can provide high peripheral integration for industrial, communications, and control applications.
The ATXMEGA64A1 family supports in-system programmable Flash with read-while-write operation, internal EEPROM, and internal SRAM. Its eight flexible 16-bit timer/counter channels support compare and PWM functions, while the event system can connect peripherals without requiring continuous CPU intervention. Four-channel DMA reduces the processing burden associated with data movement, and the programmable multilevel interrupt controller helps organize real-time event handling. The 78 available I/O lines also provide substantial interface density despite the compact 7 x 7 mm package.
The 32 MHz AVR core operates as an 8/16-bit processor, allowing efficient access to 16-bit data while retaining compatibility with 8-bit peripherals and general-purpose I/O. The external bus interface can connect the controller to additional memory or peripheral devices, while the DMA and event system support partitioned real-time architectures. These resources make the MCU suitable for designs where deterministic response, concurrency, and peripheral integration matter more than the broader software ecosystem of a general-purpose 32-bit processor.
Typical uses include industrial data acquisition, communications equipment, sensor hubs, embedded control panels, and compact control systems. Its 64 KB Flash capacity supports moderate embedded applications, while 2 KB EEPROM provides nonvolatile parameter storage and 4 KB SRAM supports working data. In a data-acquisition design, DMA can transfer samples while the event system and timers coordinate acquisition timing. In a communications controller, the external bus interface can connect memory or peripherals while the CPU manages the protocol stack.
Designers should confirm pin multiplexing, ball assignments, power requirements, clock options, and peripheral conflicts using the manufacturer datasheet and package information before committing the PCB layout. The 100-VFBGA package also demands assembly capability for inspection, rework, and reliable solder-joint inspection. For new production designs, the manufacturer lists the standard ATxmega64A1 as not recommended for new designs and directs users toward ATxmega64A1U.
This product page consolidates the verified device description, manufacturer and distributor references, lifecycle guidance, package details, and design-focused distinctions between the ATXMEGA64A1-C7U and the recommended ATXMEGA64A1U family, providing practical information for engineering review and sourcing decisions.
Bộ thay thế dễ dàng lắp đặt cho ATXMEGA64A1-C7U — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
ATXMEGA64A1U-C7U
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
ATXMEGA64A1-C7U Tỷ lệ tối đa & tính chất điện
| Product Type | 8/16-bit RISC Flash Microcontroller |
| Device Family | AVR XMEGA A1 |
| Tần số xung maksimum | 32 MHz |
| Flash Memory | 64 KB |
| Flash Organization | 32K x 16 |
| Boot Code Section | 4 KB |
| EEPROM | 2 KB |
| SRAM | 4 KB |
| DMA Channels | 4 |
| Event System Channels | 8 |
| General-Purpose I/O Lines | 78 |
| Timer/Counters | 8 flexible 16-bit timer/counter channels |
| Real-Time Counter | 16-bit |
| Operating Voltage Range | 1.6 V to 3.6 V |
| Hộp | 100-VFBGA (7 x 7 mm) |
| Kiểu lắp đặt | Surface Mount |
| Programmable Multilevel Interrupt Controller | Yes |
| External Bus Interface | Yes |
| In-System Programmable Flash | Yes |
| Read-While-Write | Yes |
Hướng dẫn cấu hình chân ATXMEGA64A1-C7U 100-vfbga (7 x 7 mm)
Cấu hình chân cho ATXMEGA64A1-C7U (100-vfbga (7 x 7 mm) gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho ATXMEGA64A1-C7U.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
ATXMEGA64A1-C7U phù hợp cho 6 Áp dụngs: Industrial Data Acquisition, Communications Controller, Precision Timing and PWM Control, Sensor Hub and Edge Node, External Bus Expansion, Compact Embedded Control Panel.
Industrial Data Acquisition
The ATXMEGA64A1-C7U fits compact acquisition systems because its four-channel DMA controller can transfer sampled data while reducing CPU involvement. Its eight 16-bit timer/counter channels support trigger timing, capture, compare, and PWM-oriented functions, while the programmable multilevel interrupt controller helps prioritize control and acquisition events. The 78 available I/O lines allow multiple sensors, conditioning circuits, and communication interfaces to share one controller. With 64 KB Flash, 4 KB SRAM, and 2 KB EEPROM, the device can host acquisition logic, configuration storage, and a modest protocol stack within a 7 x 7 mm 100-VFBGA footprint.
Được đề xuất
Communications Controller
The ATXMEGA64A1-C7U can serve as a protocol and interface controller because it combines a 32 MHz 8/16-bit AVR core with an external bus interface and 78 general-purpose I/O lines. The external bus interface supports connection to additional memory or peripheral devices, while DMA can move blocks between memory and peripherals without requiring the processor to perform every byte transfer. Its 64 KB Flash accommodates protocol state machines and firmware, 2 KB EEPROM preserves configuration parameters, and 4 KB SRAM supports active communication buffers. The compact VFBGA package also helps minimize board area in communications modules.
Được đề xuất
Precision Timing and PWM Control
The ATXMEGA64A1-C7U is well suited to timing-sensitive control because it provides eight flexible 16-bit timer/counter channels with compare and PWM capabilities. Multiple timers can establish independent periods, capture input transitions, and generate precision control outputs, while the eight-channel event system can connect peripheral events directly. This architecture reduces the processing delay that would occur when every timing relationship is handled through polling. The device's 78 I/O lines leave sufficient external connectivity for sensors, gate drivers, status inputs, and coordinated outputs within a compact embedded-control design.
Được đề xuất
Sensor Hub and Edge Node
The ATXMEGA64A1-C7U works as a sensor-hub controller when a design needs many discrete inputs, local event coordination, and modest onboard intelligence. Its 78 general-purpose I/O lines can connect digital sensors, switches, and discrete interface signals, while the four-channel DMA controller is useful for transferring peripheral data efficiently. The 2 KB EEPROM can retain calibration values or operating parameters, and the 64 KB Flash is sufficient for a focused embedded application. Its 32 MHz clock and integrated event system support responsive sampling without requiring a larger processor in space-constrained edge nodes.
Được đề xuất
External Bus Expansion
The ATXMEGA64A1-C7U is appropriate for compact embedded systems that need to extend a controller with external memory or bus-connected peripherals. Its dedicated external bus interface can organize access to additional devices, while four-channel DMA reduces the CPU overhead of repeated transfers. Eight 16-bit timer/counter channels and the programmable event system allow the bus master function to coexist with periodic measurement, PWM generation, and asynchronous event handling. The 64 KB embedded Flash remains available for the main application, while 4 KB SRAM can be used as a working region for buffering and transfer staging.
Được đề xuất
Compact Embedded Control Panel
The ATXMEGA64A1-C7U can integrate user controls and status feedback in a compact embedded control panel. Its 78 I/O lines support displays, indicators, switches, encoders, and communication signals, while eight 16-bit timer/counter channels assist with periodic scanning, debouncing strategies, and output timing. The programmable multilevel interrupt controller helps the firmware prioritize button, timer, communication, and system events. Storage is balanced for panel-oriented firmware: 64 KB for application code, 4 KB SRAM for active state, and 2 KB EEPROM for retained user settings or calibration data.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho ATXMEGA64A1-C7U — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | ATXMEGA64A1U-C7U |
|---|---|---|
| Package | 100-VFBGA (7 x 7 mm) | 100-VFBGA (7 x 7 mm) |
| Brand | Microchip Technology | Microchip Technology |
| Device Family | AVR XMEGA A1 | AVR XMEGA A1U |
| Maximum Clock Frequency | 32 MHz | 32 MHz |
| Flash Memory | 64 KB (32K x 16) | 64 KB (32K x 16) |
| EEPROM | 2 KB | 2 KB |
| SRAM | 4 KB | 4 KB |
| Operating Voltage Range | 1.6 V to 3.6 V | 1.6 V to 3.6 V |
| Lifecycle Recommendation | Not recommended for new designs | Recommended successor family |
| External Bus Interface | Yes | Yes |
| DMA Channels | 4 | 4 |
| Event System Channels | 8 | 8 |
Bảo phân biệt quan trọng
- Manufacturer-directed lifecycle path (vsATXMEGA64A1U-C7U)
- Same-package candidate with matching core capacity (vsATXMEGA64A1U-C7U)
- Integrated real-time peripheral set (vsATXMEGA128A1U-C7U)
Ghi chú thiết kế
Design the 100-VFBGA footprint from the manufacturer package drawing and route every power and ground ball according to the datasheet recommendations. The 7 x 7 mm package has a dense ball pitch, so assembly capability, solder-paste volume, stencil design, and X-ray inspection requirements should be confirmed before release. Preserve the documented keep-out and thermal-via recommendations around exposed thermal features.
Provide a stable supply within the documented 1.6 V to 3.6 V operating range and follow the manufacturer’s recommended decoupling network. Place high-frequency bypass capacitance close to the relevant power balls and keep return current paths short to reduce voltage droop during 32 MHz operation. Validate the rail during startup and worst-case peripheral activity rather than assuming nominal supply voltage alone is sufficient.
Map the programmable event system, DMA channels, timers, external bus, and general-purpose I/O before assigning package balls. Several functions can have alternate peripheral connections, and incorrect multiplexing can create contention or unavailable features. Keep external-bus and high-speed signal routing short, use controlled-impedance routing where required, and cross-check the final ball assignments against the manufacturer pin-description table.
Do not assume that a similarly packaged XMEGA device is an automatic drop-in replacement. Verify power-ball placement, I/O direction, analog-capable pins, reset behavior, clock configuration, peripheral multiplexing, bootloader operation, and absolute maximum ratings. For ATXMEGA64A1-C7U specifically, evaluate ATXMEGA64A1U-C7U through manufacturer documentation and application validation before changing an approved production design.
Thông tin tuân thủ
No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status was identified for the exact ordering code. The manufacturer marks the standard ATxmega64A1 family as not recommended for new designs and recommends ATxmega64A1U.