BCM89500BQLEG - 7-Port 4-PHY Ethernet Switch | Broadcom
MPN: BCM89500BQLEG ✗ Tapus ng BuhayBCM89500BQLEG Ulas
An automotive Ethernet switch is a network-interface semiconductor that coordinates data links between vehicle electronic systems. In the hierarchy of electronic components, BCM89500BQLEG is an Ethernet transceiver and interface IC, with BroadR PHY functionality integrated into a multi-port switching device. Such devices connect automotive controllers, sensors, gateways, and domain controllers through standardized Ethernet links while reducing the number of separate physical-layer components required on a circuit board.
The principal cataloged features are four integrated BroadR PHY transceivers, seven-port automotive switch functionality, 176 terminal positions, a square gull-wing package, and RoHS compliance. The part is categorized by its manufacturers as a specialized interface, driver, receiver, and transceiver device. These details make it relevant to vehicle networking designs where multiple Ethernet PHYs and centralized link management are required within one integrated component.
Technically, the BCM89500BQLEG combines a seven-port switching function with four integrated BroadR PHYs. This integration can simplify board partitioning compared with a design assembled from separate switching and PHY components. The 176-lead surface-mount package provides the physical interconnect area needed for a device with numerous high-speed signals, but its large footprint demands careful PCB escape routing, layer planning, and thermal assessment.
Typical applications include automotive Ethernet gateways, body and chassis controllers, vehicle domain controllers, infotainment systems, advanced driver-assistance electronics, and industrial or networking equipment requiring multi-PHY connectivity. Its seven-port architecture can support several network nodes while four integrated BroadR PHYs handle physical-layer signaling directly within the device.
A key design consideration is that the package has 176 terminals and therefore requires exact manufacturer pinout assignment. Use the Broadcom datasheet pin-description table to map power, ground, clocks, data interfaces, and PHY signals before schematic capture and PCB layout. Confirm device-specific power, interface, operating-temperature, and signal-integrity requirements against the exact BCM89500BQLEG documentation.
This product record consolidates the confirmed catalog attributes, package information, RoHS status, comparable Broadcom options, and practical integration guidance for engineers evaluating BCM89500BQLEG. It also separates confirmed electrical data from parameters that must be obtained from the manufacturer datasheet, helping design teams assess package, switching, and PHY requirements before committing a PCB design.
Mga alternatibo na pwedeng ilagay na BCM89500BQLEG — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
BCM89500BPLG
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
BCM89500BMLG
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
BCM89500BFLG
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
BCM89500BILG
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
BCM89500BQLG
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
BCM89500BQLEG Mga Pinakamataas na Rating at Electrical Characteristics
| Product Type | Multi-port Ethernet switch with integrated BroadR PHYs |
| Total Switch Ports | 7 ports |
| Integrated Transceivers | 4 transceivers |
| Integrated PHY Count | 4 BroadR PHYs |
| Interface Category | Specialized interface, driver, receiver, and transceiver IC |
| Terminal Count | 176 terminals |
| Package Code | S-PQFP-G176 |
| Package Shape | Square |
| Terminal Form | Gull wing |
| Uri ng Pagpapasok | Surface mount |
| Tindminan RoHS | Compliant |
| Manufacturer | Broadcom Limited |
Gabay sa Pin Configuration ng BCM89500BQLEG square
Pin configuration para sa BCM89500BQLEG (square package). Ang analog component na ito ay may input, output, at power supply pins. Sumangguni sa datasheet ng manufacturer para sa offset null, compensation, at enable pin configurations. Perpekto para sa signal conditioning at amplifier circuits.
Wala ng detalyadong pinout data na magagamit para sa BCM89500BQLEG.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
BCM89500BQLEG ay nararapat para sa 6 aplikasyons: Automotive Ethernet Gateway, Vehicle Domain Controller, Body and Chassis Controller, Advanced Driver-Assistance Electronics, Automotive Infotainment Network, Industrial Multi-PHY Ethernet Equipment.
Automotive Ethernet Gateway
BCM89500BQLEG fits an automotive Ethernet gateway that must consolidate several vehicle-network links into a switched controller. The seven-port switch provides a path for multiple nodes, while the four integrated BroadR PHYs reduce the need for separate physical-layer transceivers. Its 176-terminal S-PQFP-G176 package provides extensive physical connectivity, although the large lead count makes pin-by-pin schematic review and exact land-pattern control essential. The main design trade-off is integration: four PHYs are consolidated in one device, but the system must meet the package’s demanding power, thermal, and high-speed routing requirements.
Inirekomenda
Vehicle Domain Controller
BCM89500BQLEG is appropriate for a vehicle domain controller that consolidates Ethernet connectivity for body, chassis, infotainment, or driver-assistance subsystems. Seven switch ports allow several logical network connections to share a central switching device, and four integrated BroadR PHYs support direct physical-layer termination. Compared with a board using discrete switch and PHY devices, the integrated approach reduces component count and interconnect complexity. Designers must still budget for careful PCB escape routing around 176 terminals, independent high-speed pair routing, and thermal performance across the full automotive operating environment.
Inirekomenda
Body and Chassis Controller
BCM89500BQLEG can support a body or chassis controller that connects distributed vehicle nodes through a multi-port Ethernet architecture. The seven available switch ports suit centralized management of multiple endpoints, while the four integrated BroadR PHYs provide the confirmed physical-layer transceiver count. This arrangement is useful when a controller needs several automotive Ethernet links without allocating a separate PHY package beside every switch port. Design verification should focus on the exact supported data rate, medium, clock requirements, and fault behavior documented for BCM89500BQLEG before assigning production network traffic.
Inirekomenda
Advanced Driver-Assistance Electronics
BCM89500BQLEG is suitable for centralized driver-assistance electronics that must connect sensors, processing modules, and vehicle-control nodes over Ethernet. Its seven-port switching architecture can organize several network segments, while four integrated BroadR PHYs shorten the physical-layer implementation path. The benefit is a consolidated network interface that can scale with multiple high-speed links and reduce discrete PHY count. The engineering trade-off is that the 176-terminal package increases layout complexity, so high-speed differential routing, return paths, supply distribution, and thermal analysis must follow the Broadcom reference implementation and PCB guidelines.
Inirekomenda
Automotive Infotainment Network
BCM89500BQLEG can be evaluated for an automotive infotainment network hub that connects cockpit controllers and peripheral nodes. Seven switch ports allow several connections to share one network interface, and the four integrated BroadR PHYs support physical-layer integration within the same Broadcom device. This is valuable where board space and component count matter. However, infotainment designs often impose strict EMC, EMI, latency, and thermal requirements, so engineers should verify the interface and automotive qualification details in the manufacturer documentation before using the device as the network hub.
Inirekomenda
Industrial Multi-PHY Ethernet Equipment
BCM89500BQLEG may suit industrial Ethernet equipment that requires seven switch ports and four integrated BroadR PHYs on a common network interface. The combined switch-and-PHY architecture can streamline controller boards serving sensors, remote I/O, or machine-control nodes. Unlike the automotive context in which the part is prominently cataloged, industrial use requires direct confirmation of operating-temperature limits, lifetime expectations, regulatory requirements, and supported media interfaces. The 176-terminal package also makes assembly and inspection more demanding, making careful footprint replication and signal-integrity validation essential.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for BCM89500BQLEG — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | BCM89500BPLG | BCM89500BMLG | BCM89500BFLG | BCM89500BILG | BCM89500BQLG |
|---|---|---|---|---|---|---|
| Brand | Broadcom | Broadcom | Broadcom | Broadcom | Broadcom | Broadcom |
| Package | 176-terminal S-PQFP-G176 | 176-terminal S-PQFP-G176 | 176-terminal S-PQFP-G176 | 176-terminal S-PQFP-G176 | 176-terminal S-PQFP-G176 | 176-terminal S-PQFP-G176 |
| Integrated Transceivers | 4 | 4 | 4 | 4 | 4 | 4 |
| Total Switch Ports | 7 | 7 | 7 | 7 | 7 | 7 |
| Terminal Count | 176 terminals | 176 terminals | 176 terminals | 176 terminals | 176 terminals | 176 terminals |
| Terminal Form | Gull wing | Gull wing | Gull wing | Gull wing | Gull wing | Gull wing |
| Package Shape | Square | Square | Square | Square | Square | Square |
Pangunahing mga Pagkakaiba
- Combines seven switch ports with four integrated BroadR PHYs (kumpara saBCM89500BPLG)
- Uses the same 176-terminal automotive Ethernet footprint across the listed family options (kumpara saBCM89500BMLG)
- Provides a high-integration network interface for multi-node vehicle designs (kumpara saBCM89610A2BMLG)
Talaan ng Disenyo
Start PCB layout from the exact Broadcom S-PQFP-G176 land pattern and pin-1 orientation rather than from a generic 176-pin library footprint. Preserve the manufacturer-recommended pad dimensions, solder mask, paste, and courtyard clearances. Because BCM89500BQLEG contains four integrated BroadR PHYs and a seven-port switch, every high-speed differential route should use the datasheet’s reference geometry and a stack-up capable of meeting the specified impedance and return-path requirements.
Assign the device’s supply, ground, and auxiliary pins directly from the Broadcom pin-description table and identify whether any pins require special connection or treatment. Place the required bypass network at the corresponding package pins rather than consolidating it at the board edge. Confirm capacitor selection, permitted DC-bias behavior, and permitted ESR from the manufacturer datasheet before release, because ceramic-capacitor effective capacitance can fall substantially with bias.
Evaluate thermal performance across the vehicle’s full ambient range and all four integrated BroadR PHYs operating concurrently. Use the package thermal data and application power limits in the Broadcom documentation to calculate junction temperature, then verify the result on the actual PCB with copper, enclosure, airflow, and neighboring heat sources. Do not assume that a large gull-wing package alone provides adequate heat spreading without a properly designed thermal land and board construction.
Route Ethernet differential pairs as controlled-impedance nets over a continuous reference plane, avoiding plane splits, unnecessary vias, and sources of coupled noise. Keep PHY clocks, data interfaces, and sensitive analog or supply nets separated from aggressive switching paths where the pin arrangement allows it. Validate the completed layout for crosstalk, insertion loss, return loss, and skew with the actual stack-up rather than relying only on schematic connectivity.
Impormasyon ng Pagsunod sa Kautusan
RoHS compliance is indicated in the component catalog entry. Other environmental, qualification, and material-compliance attributes require confirmation in the manufacturer documentation.