Broadcom

BCM89500BQLEG - 7-Port 4-PHY Ethernet Switch | Broadcom

MPN: BCM89500BQLEG ✗ סוף ייצור
S-PQFP-G176 Package
כמות הזמנה מינימלית: 1 |

BCM89500BQLEG סקירה

Broadcom BCM89500BQLEG is a multi-port automotive Ethernet switch with four integrated BroadR PHY transceivers, provided in a 176-terminal gull-wing surface-mount package. The device supports seven-port automotive switching according to its catalog description and combines four integrated BroadR PHYs in one S-PQFP-G176 package. The Broadcom Limited BCM89500BQLEG is identified as a specialized Ethernet interface and transceiver IC.

An automotive Ethernet switch is a network-interface semiconductor that coordinates data links between vehicle electronic systems. In the hierarchy of electronic components, BCM89500BQLEG is an Ethernet transceiver and interface IC, with BroadR PHY functionality integrated into a multi-port switching device. Such devices connect automotive controllers, sensors, gateways, and domain controllers through standardized Ethernet links while reducing the number of separate physical-layer components required on a circuit board.

The principal cataloged features are four integrated BroadR PHY transceivers, seven-port automotive switch functionality, 176 terminal positions, a square gull-wing package, and RoHS compliance. The part is categorized by its manufacturers as a specialized interface, driver, receiver, and transceiver device. These details make it relevant to vehicle networking designs where multiple Ethernet PHYs and centralized link management are required within one integrated component.

Technically, the BCM89500BQLEG combines a seven-port switching function with four integrated BroadR PHYs. This integration can simplify board partitioning compared with a design assembled from separate switching and PHY components. The 176-lead surface-mount package provides the physical interconnect area needed for a device with numerous high-speed signals, but its large footprint demands careful PCB escape routing, layer planning, and thermal assessment.

Typical applications include automotive Ethernet gateways, body and chassis controllers, vehicle domain controllers, infotainment systems, advanced driver-assistance electronics, and industrial or networking equipment requiring multi-PHY connectivity. Its seven-port architecture can support several network nodes while four integrated BroadR PHYs handle physical-layer signaling directly within the device.

A key design consideration is that the package has 176 terminals and therefore requires exact manufacturer pinout assignment. Use the Broadcom datasheet pin-description table to map power, ground, clocks, data interfaces, and PHY signals before schematic capture and PCB layout. Confirm device-specific power, interface, operating-temperature, and signal-integrity requirements against the exact BCM89500BQLEG documentation.

This product record consolidates the confirmed catalog attributes, package information, RoHS status, comparable Broadcom options, and practical integration guidance for engineers evaluating BCM89500BQLEG. It also separates confirmed electrical data from parameters that must be obtained from the manufacturer datasheet, helping design teams assess package, switching, and PHY requirements before committing a PCB design.

חלופות תחליף ישיר עבור BCM89500BQLEG — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

BCM89500BPLG

✅ Drop-In ⚠️ מפרטים לא מאומתים
📦 176-terminal S-PQFP-G176
Retains 4 integrated transceivers and 176 terminals; option-specific grade and electrical differences are not established in the available catalog data

📋 חלופה להתייחסות (לא בקטלוג)

BCM89500BMLG

✅ Drop-In ⚠️ מפרטים לא מאומתים
📦 176-terminal S-PQFP-G176
Retains 4 integrated transceivers and 176 terminals; option-specific grade and electrical differences are not established in the available catalog data

📋 חלופה להתייחסות (לא בקטלוג)

BCM89500BFLG

✅ Drop-In ⚠️ מפרטים לא מאומתים
📦 176-terminal S-PQFP-G176
Retains 4 integrated transceivers and 176 terminals; option-specific grade and electrical differences are not established in the available catalog data

📋 חלופה להתייחסות (לא בקטלוג)

BCM89500BILG

✅ Drop-In ⚠️ מפרטים לא מאומתים
📦 176-terminal S-PQFP-G176
Retains 4 integrated transceivers and 176 terminals; option-specific grade and electrical differences are not established in the available catalog data

📋 חלופה להתייחסות (לא בקטלוג)

BCM89500BQLG

✅ Drop-In ⚠️ מפרטים לא מאומתים
📦 176-terminal S-PQFP-G176
Retains 4 integrated transceivers and 176 terminals; option-specific grade and electrical differences are not established in the available catalog data

📋 חלופה להתייחסות (לא בקטלוג)

BCM89500BQLEG דירוגים מרביים ומאפיינים חשמליים

Product Type Multi-port Ethernet switch with integrated BroadR PHYs
Total Switch Ports 7 ports
Integrated Transceivers 4 transceivers
Integrated PHY Count 4 BroadR PHYs
Interface Category Specialized interface, driver, receiver, and transceiver IC
Terminal Count 176 terminals
Package Code S-PQFP-G176
Package Shape Square
Terminal Form Gull wing
סוג הרכבה Surface mount
סטטוס RoHS Compliant
Manufacturer Broadcom Limited

מדריך תצורת פינים של BCM89500BQLEG square

תצורת פינים עבור BCM89500BQLEG (מארזת square). רכיב אנלוגי זה כולל פיני כניסה, יציאה ואספקת מתח. יש לעיין בגיליון הנתונים של היצרן לתצורות פיני איפוס היסט, פיצוי והפעלה. אידיאלי למעגלי עיצוב אותות ומגברים.

תרשים פינים של מארזת square עבור BCM89500BQLEG

אין נתוני פריסת פינים מפורטים עבור BCM89500BQLEG.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

BCM89500BQLEG מתאים עבור 6 יישוםs: Automotive Ethernet Gateway, Vehicle Domain Controller, Body and Chassis Controller, Advanced Driver-Assistance Electronics, Automotive Infotainment Network, Industrial Multi-PHY Ethernet Equipment.

🚗

Automotive Ethernet Gateway

BCM89500BQLEG fits an automotive Ethernet gateway that must consolidate several vehicle-network links into a switched controller. The seven-port switch provides a path for multiple nodes, while the four integrated BroadR PHYs reduce the need for separate physical-layer transceivers. Its 176-terminal S-PQFP-G176 package provides extensive physical connectivity, although the large lead count makes pin-by-pin schematic review and exact land-pattern control essential. The main design trade-off is integration: four PHYs are consolidated in one device, but the system must meet the package’s demanding power, thermal, and high-speed routing requirements.

🚗

Vehicle Domain Controller

BCM89500BQLEG is appropriate for a vehicle domain controller that consolidates Ethernet connectivity for body, chassis, infotainment, or driver-assistance subsystems. Seven switch ports allow several logical network connections to share a central switching device, and four integrated BroadR PHYs support direct physical-layer termination. Compared with a board using discrete switch and PHY devices, the integrated approach reduces component count and interconnect complexity. Designers must still budget for careful PCB escape routing around 176 terminals, independent high-speed pair routing, and thermal performance across the full automotive operating environment.

🚗

Body and Chassis Controller

BCM89500BQLEG can support a body or chassis controller that connects distributed vehicle nodes through a multi-port Ethernet architecture. The seven available switch ports suit centralized management of multiple endpoints, while the four integrated BroadR PHYs provide the confirmed physical-layer transceiver count. This arrangement is useful when a controller needs several automotive Ethernet links without allocating a separate PHY package beside every switch port. Design verification should focus on the exact supported data rate, medium, clock requirements, and fault behavior documented for BCM89500BQLEG before assigning production network traffic.

🚗

Advanced Driver-Assistance Electronics

BCM89500BQLEG is suitable for centralized driver-assistance electronics that must connect sensors, processing modules, and vehicle-control nodes over Ethernet. Its seven-port switching architecture can organize several network segments, while four integrated BroadR PHYs shorten the physical-layer implementation path. The benefit is a consolidated network interface that can scale with multiple high-speed links and reduce discrete PHY count. The engineering trade-off is that the 176-terminal package increases layout complexity, so high-speed differential routing, return paths, supply distribution, and thermal analysis must follow the Broadcom reference implementation and PCB guidelines.

📺

Automotive Infotainment Network

BCM89500BQLEG can be evaluated for an automotive infotainment network hub that connects cockpit controllers and peripheral nodes. Seven switch ports allow several connections to share one network interface, and the four integrated BroadR PHYs support physical-layer integration within the same Broadcom device. This is valuable where board space and component count matter. However, infotainment designs often impose strict EMC, EMI, latency, and thermal requirements, so engineers should verify the interface and automotive qualification details in the manufacturer documentation before using the device as the network hub.

🏭

Industrial Multi-PHY Ethernet Equipment

BCM89500BQLEG may suit industrial Ethernet equipment that requires seven switch ports and four integrated BroadR PHYs on a common network interface. The combined switch-and-PHY architecture can streamline controller boards serving sensors, remote I/O, or machine-control nodes. Unlike the automotive context in which the part is prominently cataloged, industrial use requires direct confirmation of operating-temperature limits, lifetime expectations, regulatory requirements, and supported media interfaces. The 176-terminal package also makes assembly and inspection more demanding, making careful footprint replication and signal-integrity validation essential.

סיכום מוצרים מומלצים

BCM89610A2BMLG Broadcom automotive Ethernet comparison option בשימוש ב-: Automotive Ethernet Gateway, Vehicle Domain Controller, Body and Chassis Controller, Advanced Driver-Assistance Electronics, Automotive Infotainment Network, Industrial Multi-PHY Ethernet Equipment BCM89500BQLEG Broadcom בשימוש ב-: Automotive Ethernet Gateway, Vehicle Domain Controller, Body and Chassis Controller, Advanced Driver-Assistance Electronics, Automotive Infotainment Network, Industrial Multi-PHY Ethernet Equipment
What is the BCM89500BQLEG?
The BCM89500BQLEG is a Broadcom multi-port automotive Ethernet switch with four integrated BroadR PHY transceivers and seven switch ports. It is classified as a specialized Ethernet interface and transceiver IC and is packaged in a 176-terminal gull-wing S-PQFP-G176 package. Broadcom’s product descriptions identify the part as a 7-port automotive switch with four integrated BroadR PHYs.
How many Ethernet PHYs and switch ports does BCM89500BQLEG provide?
BCM89500BQLEG provides four integrated BroadR PHYs and seven switch ports. The four transceivers are confirmed in Broadcom catalog descriptions, while the seven-port configuration identifies the device as a multi-port automotive Ethernet switch. This combination lets a vehicle-network design consolidate several physical-layer links and switch functions into one large-surface-mount IC.
What package does BCM89500BQLEG use?
BCM89500BQLEG uses a 176-terminal, square, gull-wing surface-mount package identified as S-PQFP-G176. Because the package has 176 terminals, engineers should assign every power, ground, control, clock, data, and PHY connection from the exact Broadcom pin-description table before starting PCB routing. Do not infer signal assignments from neighboring pins.
Where can I download the BCM89500BQLEG datasheet?
The BCM89500BQLEG datasheet landing page is available at the Broadcom document URL listed on this page. Use the manufacturer PDF for authoritative pin assignments, electrical limits, application circuits, interface timing, and package drawings. The datasheet repository link on this page provides an additional route to the document, but the manufacturer document should remain the controlling technical reference.
Where can I find the BCM89500BQLEG pinout?
The BCM89500BQLEG pinout must be taken from the pin-description table in the Broadcom datasheet for the S-PQFP-G176 package. This device has 176 terminals, so a partial internet pinout is insufficient for PCB implementation. Assign pins by exact net name, including power and ground distinctions, and preserve the package’s pin-1 orientation and exposed thermal requirements shown by Broadcom.
Is BCM89500BQLEG suitable for automotive Ethernet?
Yes, BCM89500BQLEG is explicitly described as a 7-port automotive switch with four integrated BroadR PHYs. Its suitability for a particular vehicle platform still depends on the device’s exact electrical limits, environmental ratings, interface protocol, and qualification details in the Broadcom datasheet. Verify those requirements against the vehicle network design before production release.
What can replace BCM89500BQLEG?
A valid drop-in replacement must use the same 176-terminal footprint and preserve the seven-port switching and four-BroadR-PHY configuration. The listed Broadcom family options provide the closest same-family candidates, but the exact pin, electrical, temperature, and qualification requirements must be confirmed in their individual datasheets. A package-size or interface-family similarity alone does not establish drop-in compatibility.
Is BCM89500BQLEG the same as BCM89500BPLG?
BCM89500BQLEG and BCM89500BPLG are related Broadcom 176-pin automotive Ethernet switch options, but they should not be treated as automatically identical. The option code may select different orderable grades or configurations, while the confirmed common architecture includes four integrated BroadR PHYs and seven switch ports. Compare the exact manufacturer pinout, temperature grade, and electrical tables before substitution.
What is the best Broadcom equivalent for BCM89500BQLEG?
The closest Broadcom alternatives are the BCM89500 family options that retain the 176-terminal package, seven-port switch, and four integrated BroadR PHYs. Selection should be based on verified electrical ratings, operating-temperature range, interface configuration, qualification, and lifecycle status rather than the family name alone. Each alternative must be checked against the BCM89500BQLEG datasheet before being approved as a drop-in replacement.
BCM89500BQLEG vs BCM89500BPLG — which is better for an automotive gateway?
BCM89500BQLEG is the qualified reference choice when it satisfies the gateway’s exact temperature, electrical, and ordering requirements. BCM89500BPLG is a same-family candidate for reuse of the 176-pin platform, but its grade-specific limits and configuration must be confirmed from its datasheet. The decisive factors are operating-temperature coverage, interface compatibility, BroadR PHY configuration, and lifecycle availability.
When should I choose BCM89500BQLEG over another multi-PHY Ethernet switch?
Choose BCM89500BQLEG when the design specifically benefits from seven switch ports and four integrated BroadR PHYs in one 176-terminal device. Compare alternatives by supported data rates, media interfaces, clock architecture, power requirements, temperature grade, safety qualification, and software or hardware integration. The component is best suited to designs whose exact vehicle-network requirements match the BCM89500 family.
How should BCM89500BQLEG be placed on a PCB?
Treat BCM89500BQLEG as a high-pin-count, high-speed mixed-signal layout problem. Place decoupling structures at the pins identified as power and ground in the Broadcom pin table, preserve the land pattern and orientation, and route Ethernet differential pairs according to the datasheet’s guidance. Validate the complete stack-up and reference design rather than deriving constraints from the 176-pin package alone.
What are the key specifications of BCM89500BQLEG that engineers should know?
The confirmed headline specifications are seven switch ports, four integrated BroadR PHYs, 176 terminals, a square gull-wing surface-mount package, and RoHS compliance. Broadcom classifies the device as a specialized Ethernet transceiver and interface IC. Supply voltage, supported data rate, maximum link count, power consumption, operating temperature, and automotive qualification grade require confirmation from the exact manufacturer datasheet.
Where to buy BCM89500BQLEG online?
Use the Request a Quote form on this page to request BCM89500BQLEG availability, current commercial terms, and lead time from XAIPART. The form allows buyers to specify quantity, package preference, and shipment requirements without relying on a static listing price. Confirm the exact BCM89500BQLEG ordering code, date code, and delivery plan in the resulting quotation.
What is the price and lead time of BCM89500BQLEG?
Current BCM89500BQLEG pricing and lead time depend on order quantity, date-code requirements, packaging, and supply status. Submit the Request a Quote form on this page with the required quantity and delivery location to obtain a current response from XAIPART. Use the returned quotation for purchasing decisions because embedded listing prices can change independently of technical availability.
Is BCM89500BQLEG currently in stock?
BCM89500BQLEG stock should be confirmed through the Request a Quote form on this page rather than inferred from a general distributor listing. Include your required quantity, target date, and acceptable date-code range in the request. XAIPART can then confirm current allocation and lead time for the exact orderable MPN BCM89500BQLEG.

נתוני עזר הנדסיים עבור BCM89500BQLEG — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose BCM89500BQLEG when the design requires a seven-port automotive Ethernet switching function with four integrated BroadR PHYs and can accommodate the 176-terminal S-PQFP-G176 footprint. The five listed Broadcom alternatives are appropriate candidates for a controlled design-in review because they preserve the same family architecture and package form, but their grade-specific temperature range, electrical limits, qualification, and lifecycle status must be verified before approval. Do not select an alternative solely from its ordering suffix. Evaluate supported data rates, media interfaces, clocking, supply requirements, automotive qualification, software or configuration requirements, and reference-design compatibility. BCM89610A2BMLG appears in comparison material but has a different package form and should be treated as an engineering alternative, not a drop-in substitute. For production continuity, freeze the approved manufacturer pinout, package drawing, PCB stack-up, and thermal design for BCM89500BQLEG and obtain a quotation for the exact orderable MPN.

השוואה עם חלופות

פרמטר מוצר זה BCM89500BPLG BCM89500BMLG BCM89500BFLG BCM89500BILG BCM89500BQLG
Brand Broadcom Broadcom Broadcom Broadcom Broadcom Broadcom
Package 176-terminal S-PQFP-G176 176-terminal S-PQFP-G176 176-terminal S-PQFP-G176 176-terminal S-PQFP-G176 176-terminal S-PQFP-G176 176-terminal S-PQFP-G176
Integrated Transceivers 4 4 4 4 4 4
Total Switch Ports 7 7 7 7 7 7
Terminal Count 176 terminals 176 terminals 176 terminals 176 terminals 176 terminals 176 terminals
Terminal Form Gull wing Gull wing Gull wing Gull wing Gull wing Gull wing
Package Shape Square Square Square Square Square Square

מבדילים עיקריים

  • Combines seven switch ports with four integrated BroadR PHYs (לעומתBCM89500BPLG)
  • Uses the same 176-terminal automotive Ethernet footprint across the listed family options (לעומתBCM89500BMLG)
  • Provides a high-integration network interface for multi-node vehicle designs (לעומתBCM89610A2BMLG)

הערות תכנון

Start PCB layout from the exact Broadcom S-PQFP-G176 land pattern and pin-1 orientation rather than from a generic 176-pin library footprint. Preserve the manufacturer-recommended pad dimensions, solder mask, paste, and courtyard clearances. Because BCM89500BQLEG contains four integrated BroadR PHYs and a seven-port switch, every high-speed differential route should use the datasheet’s reference geometry and a stack-up capable of meeting the specified impedance and return-path requirements.

Assign the device’s supply, ground, and auxiliary pins directly from the Broadcom pin-description table and identify whether any pins require special connection or treatment. Place the required bypass network at the corresponding package pins rather than consolidating it at the board edge. Confirm capacitor selection, permitted DC-bias behavior, and permitted ESR from the manufacturer datasheet before release, because ceramic-capacitor effective capacitance can fall substantially with bias.

Evaluate thermal performance across the vehicle’s full ambient range and all four integrated BroadR PHYs operating concurrently. Use the package thermal data and application power limits in the Broadcom documentation to calculate junction temperature, then verify the result on the actual PCB with copper, enclosure, airflow, and neighboring heat sources. Do not assume that a large gull-wing package alone provides adequate heat spreading without a properly designed thermal land and board construction.

Route Ethernet differential pairs as controlled-impedance nets over a continuous reference plane, avoiding plane splits, unnecessary vias, and sources of coupled noise. Keep PHY clocks, data interfaces, and sensitive analog or supply nets separated from aggressive switching paths where the pin arrangement allows it. Validate the completed layout for crosstalk, insertion loss, return loss, and skew with the actual stack-up rather than relying only on schematic connectivity.

מידע על תאימות

RoHS
Compliant
REACH
Unknown
AEC-Q100
Unknown
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

RoHS compliance is indicated in the component catalog entry. Other environmental, qualification, and material-compliance attributes require confirmation in the manufacturer documentation.

הנתונים אומתו בתאריך: 2026-11-15 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

BCM89500BQLEG datasheet BCM89500BQLEG datasheet pdf BCM89500BQLEG pinout BCM89500BQLEG 176 pin BCM89500BQLEG BroadR PHY Broadcom BCM89500BQLEG BCM89500BQLEG equivalent BCM89500BQLEG replacement BCM89500BQLEG vs BCM89500BPLG BCM89500BQLEG automotive Ethernet switch BCM89500BQLEG S-PQFP-G176 footprint BCM89500BQLEG price BCM89500BQLEG stock BCM89500BQLEG application circuit

רכיבים ומונחים קשורים

Broadcom Broadcom Limited BCM89500BQLEG BCM89500BPLG BCM89500BMLG BCM89500BFLG BCM89500BILG BCM89500BQLG BCM89610A2BMLG Ethernet switch Ethernet transceiver interface IC BroadR PHY automotive Ethernet S-PQFP-G176 176-terminal package gull-wing package surface mount vehicle domain controller automotive gateway RoHS seven-port switching four integrated PHYs high-speed differential routing
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר