ROHM Semiconductor

BD37503FV-E2 2-Band I2C Audio Processor | ROHM Semiconductor

MPN: BD37503FV-E2 ✗ Tapus ng Buhay
7 V to 9.5 V Vdss 20-pin SSOP Package
MOQ: 1 |

BD37503FV-E2 Ulas

The ROHM Semiconductor BD37503FV-E2 is an analog sound processor with a built-in four-input selector and two-band equalizer, designed for audio systems operating from 7 V to 9.5 V. The device also includes switchable loudness and second-order anti-aliasing filters and uses an I2C bus for control. It is supplied in a 20-pin SSOP surface-mount package.

An analog sound processor is an audio special-purpose integrated circuit that adjusts or conditions audio signals between source selection, amplification, and the speaker system. Within the signal chain, it belongs to the broader hierarchy of audio signal-processing IC, audio interface IC, and semiconductor. The BD37503FV-E2 combines channel selection, bass and treble equalization, loudness compensation, and output filtering in one dedicated analog device, reducing the number of separate control blocks required in a compact audio design.

The two-band equalizer provides independent low-frequency and high-frequency tone controls. The built-in four-input selector supports connecting several audio sources, while the differential input selector permits combinations of single-ended and differential inputs. Switchable loudness processing adds a tonal contour intended for low-volume listening, and the selectable second-order anti-aliasing filter attenuates noise that can occur at the output of a DAC. These functions are controlled through the device's I2C interface.

The 7 V to 9.5 V operating range places the part in systems using an approximately 8 V audio bus. Because this is an analog processor rather than a digital signal processor, its behavior is governed by the internal filter and selector circuitry rather than software-defined signal paths. The I2C control interface allows a host controller to adjust the operating configuration without dedicating separate analog switches to every function. Exact filter coefficients, control-register values, frequency response points, and signal-to-noise figures must be established from the manufacturer datasheet before final circuit tuning.

Typical uses include compact consumer-audio systems, multimedia equipment, car-audio interfaces, active speakers, and equipment that accepts multiple analog audio sources. In each case, the BD37503FV-E2 can provide centralized source selection and tone shaping before the selected signal reaches an audio amplifier. Its integrated filtering is particularly useful when a DAC output requires selectable attenuation of out-of-band or switching-related noise.

The primary design consideration is signal integrity. Keep analog traces short, provide a low-impedance return path, decouple the supply near the device, and isolate the audio path from switching nodes and high-current amplifier outputs. Confirm that the selected input, filter, and equalizer settings remain valid for the source level and intended speaker crossover behavior rather than assuming that bass, treble, and loudness controls can compensate for incorrect gain staging.

This page consolidates the confirmed operating features, package information, application guidance, and sourcing structure for the BD37503FV-E2. It is intended to help engineers evaluate the device against the functional requirements of a multi-source analog audio system before checking the complete pin, register, and electrical tables in the ROHM datasheet.

Mga alternatibo na pwedeng ilagay na BD37503FV-E2 — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

Wala ng magagamit na drop-in alternatibo para sa produkto na ito.

Hilingin ang Alternatibo

BD37503FV-E2 Mga Pinakamataas na Rating at Electrical Characteristics

Product Type Analog sound processor with built-in two-band equalizer
Supply Voltage na Operasyon 7 V to 9.5 V
Control Interface I2C bus
Input Selector 4 inputs
Input Configuration Single-ended and differential input combinations
Equalizer 2-band, bass and treble
Loudness Filter Switchable
Anti-Aliasing Filter Second-order, switchable
Anti-Aliasing Filter Purpose Attenuates noise occurring at DAC output
Packhaging 20-pin SSOP
Uri ng Pagpapasok Surface mount
Bilang ng Pins 20 pins
Audio Processing Functions Input selection, bass, treble, loudness, and anti-aliasing filtering

Gabay sa Pin Configuration ng BD37503FV-E2 20-pin ssop

Pin configuration para sa BD37503FV-E2 (20-pin ssop package). Ang analog component na ito ay may input, output, at power supply pins. Sumangguni sa datasheet ng manufacturer para sa offset null, compensation, at enable pin configurations. Perpekto para sa signal conditioning at amplifier circuits.

Pinout diagram ng 20-pin ssop package para sa BD37503FV-E2

Wala ng detalyadong pinout data na magagamit para sa BD37503FV-E2.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

BD37503FV-E2 ay nararapat para sa 6 aplikasyons: Multi-Source Consumer Audio, DAC Output Noise Filtering, Active Speaker Tone Control, Automotive Audio Interface, Portable Multimedia Audio, Industrial Audio Control Panel.

🎧

Multi-Source Consumer Audio

The BD37503FV-E2 fits compact consumer-audio products that must accept several analog sources and apply common tone control before amplification. Its four-input selector reduces the need for separate analog routing components, while the two-band equalizer provides electronic bass and treble adjustment. The 7 V to 9.5 V operating range supports an approximately 8 V audio architecture, and I2C control allows a system processor to configure source and filtering functions without external potentiometers. Designers should establish the input gain structure before enabling loudness, because loudness and equalizer settings interact when source levels vary.

🎵

DAC Output Noise Filtering

The switchable second-order anti-aliasing filter makes the BD37503FV-E2 useful between a DAC and the downstream audio path when the design needs selectable attenuation of noise occurring at DAC output. Keeping this filtering in the sound processor can simplify centralized audio routing while allowing the filter to be enabled according to the active source. Evaluation should compare the filtered and unfiltered paths for the actual DAC, sample rate, clock arrangement, and signal amplitude. The device should not be treated as a universal replacement for a DAC's digital reconstruction filter; its role is analog post-processing within the selected signal chain.

🔊

Active Speaker Tone Control

In an active speaker or compact amplified speaker, the BD37503FV-E2 can provide a shared analog conditioning stage for bass, treble, loudness, and source selection before power amplification. Placing these functions in a dedicated sound processor keeps the signal chain configurable while limiting discrete analog-control complexity. Its 20-pin SSOP package supports conventional surface-mount assembly, and I2C control permits settings to be stored or adjusted by the product controller. The design must maintain suitable signal levels into the amplifier and avoid using tone controls to compensate for poor crossover design or inadequate headroom.

🚗

Automotive Audio Interface

The BD37503FV-E2 can serve as the analog audio conditioning element in a vehicle audio interface that combines radio, navigation, auxiliary, or media sources. Four-input selection, differential-input support, and centralized bass and treble adjustment are useful in such systems, while loudness processing can improve perceived response at reduced listening levels. The 7 V to 9.5 V operating range must align with the vehicle's audio supply architecture. Before production use, verify operating-temperature range, load-dump behavior, ESD protection, electromagnetic compatibility, and automotive qualification requirements directly with ROHM.

📱

Portable Multimedia Audio

A portable multimedia device can use the BD37503FV-E2 when analog program audio, media audio, and auxiliary sources must be selected and equalized before amplification. The I2C interface enables the host controller to switch routes and adjust the two-band equalizer, while the separate loudness and anti-aliasing functions can be enabled for listening modes or source-specific behavior. The approximately 8 V operating range requires a supply that remains within 7 V to 9.5 V across all battery and system conditions. Board-area constraints should also account for the 20-pin SSOP footprint, decoupling, filtering, and return-path routing.

🏭

Industrial Audio Control Panel

The BD37503FV-E2 is suitable for industrial audio equipment that accepts several analog sources and requires repeatable electronic tone adjustment without front-panel potentiometers. Source selection and filter configuration can be handled through I2C, simplifying panel operation and allowing operating modes to be stored by a supervisory controller. The integrated loudness filter can provide an alternate listening contour, while the selectable second-order anti-aliasing stage can be used when the source is a DAC with unwanted high-frequency content. Industrial deployment still requires validation of temperature, immunity, ESD, and supply-transient requirements.

What is the BD37503FV-E2?
The BD37503FV-E2 is a ROHM Semiconductor analog sound processor with a four-input selector, two-band equalizer, switchable loudness filter, and switchable second-order anti-aliasing filter. It operates from 7 V to 9.5 V, is controlled through an I2C bus, and is packaged in a 20-pin SSOP. According to the ROHM product page, it is intended to combine source selection and audio tone processing in one dedicated sound-processor IC.
What functions are integrated into the BD37503FV-E2?
The BD37503FV-E2 integrates a four-input selector, bass and treble equalizer, loudness filter, and second-order anti-aliasing filter. ROHM describes the anti-aliasing function as attenuating noise that occurs at a DAC output. Its differential input selector also supports combinations of single-ended and differential inputs, allowing one sound-processor IC to serve several analog audio routing configurations.
What is the operating voltage of BD37503FV-E2?
The BD37503FV-E2 operates from 7 V to 9.5 V. This operating range suits an approximately 8 V analog audio supply architecture and must be respected when designing the supply, decoupling network, and downstream amplifier interface. The value is identified in the BD37503FV family product information and should be checked against the complete electrical tables before finalizing a new design.
Where can I download the BD37503FV-E2 datasheet PDF?
The BD37503FV-E2 manufacturer datasheet can be downloaded from the ROHM-hosted PDF linked on this page. It contains the authoritative pin descriptions, electrical characteristics, filter characteristics, register information, and application details needed to implement the device. Use the ROHM PDF as the controlling document when circuit values or control settings conflict with secondary distributor summaries.
Where can I find the BD37503FV-E2 pinout?
The BD37503FV-E2 pinout should be taken from the pin-description table in the ROHM BD37503FV manufacturer datasheet. The component is a 20-pin SSOP, so the complete package diagram must show all 20 pins in their numbered order. Verify analog inputs, supply pins, ground connections, I2C signals, and filter-control connections directly against that table before assigning PCB tracks.
Can the BD37503FV-E2 select four audio inputs?
Yes. The BD37503FV-E2 contains a four-input selector, and its differential input selector supports different combinations of single-ended and differential sources. This makes it suitable for products that must accept several analog audio paths while sharing one downstream tone-control and filtering stage. The permitted source combinations and register-controlled routing sequence should be confirmed in the manufacturer's pin and register descriptions.
Does the BD37503FV-E2 have bass and treble controls?
Yes. The BD37503FV-E2 includes a built-in two-band equalizer covering bass and treble. These controls are managed through its I2C interface, which simplifies integration with a system controller and avoids separate physical potentiometers. Exact gain range, center frequencies, control resolution, and recommended operating points must be taken from the manufacturer's filter and electrical tables.
What does the anti-aliasing filter in BD37503FV-E2 do?
The BD37503FV-E2 includes a switchable second-order anti-aliasing filter that attenuates noise occurring at the output of a DAC. It can therefore provide an analog filtering stage between a DAC output and the selected audio processing path. Its usefulness depends on the DAC architecture, clocking scheme, sample rate, and noise spectrum, so evaluate the filter response in the complete signal chain.
Is the BD37503FV-E2 controlled through I2C?
Yes. The BD37503FV-E2 uses an I2C bus for control. The interface lets a host controller select the operating configuration of the audio functions without using separate analog control switches. Before layout, confirm the I2C address, serial-clock timing, read-and-write behavior, and register-reset requirements in the manufacturer datasheet to ensure compatibility with the host processor and pull-up network.
Where can I buy BD37503FV-E2 and check its price?
Use the Request a Quote form on this page to request the current BD37503FV-E2 quotation, availability, minimum order quantity, and lead time. The form allows the request to be directed through XAIPART without publishing a potentially stale price. For design approval, confirm the exact ordered suffix, package, and quantity against the quote and the manufacturer ordering information.
What is the lead time for BD37503FV-E2?
The current lead time for BD37503FV-E2 should be obtained through the Request a Quote form on this page. Lead time can vary with order quantity, inventory position, and the exact delivery region, so a generic timing statement would not be reliable. Provide the required quantity, target quantity date, and shipment destination with the request for a production-suitable commitment.
Is the BD37503FV-E2 in stock?
Current BD37503FV-E2 stock should be confirmed through the Request a Quote form on this page. The manufacturer product page and distributor listings identify the device, but listing-page availability can change independently of this product page. The quotation response should confirm quantity, package condition, shipment method, and expected allocation for the requested production schedule.
When should I choose the BD37503FV-E2 for an audio design?
Choose the BD37503FV-E2 when a compact analog audio design needs centralized four-source selection, bass and treble adjustment, switchable loudness processing, and selectable second-order anti-aliasing filtering. Its 7 V to 9.5 V range and 20-pin SSOP package are appropriate for an approximately 8 V audio architecture with I2C host control. It is less suitable when the system requires a digital audio processor, a different supply range, or a different package.
Is the BD37503FV-E2 suitable for a car-audio system?
The BD37503FV-E2 may fit a car-audio signal path when the system uses a compatible 7 V to 9.5 V analog supply and requires multi-input selection with bass, treble, loudness, and DAC-output filtering. Automotive qualification, operating-temperature limits, transient requirements, and electromagnetic compatibility must be confirmed separately before using it in a vehicle. The core processing features alone do not establish automotive compliance.
What can replace the BD37503FV-E2?
No confirmed pin-to-pin replacement for the BD37503FV-E2 is identified in the available manufacturer and distributor records. A valid replacement must use the same 20-pin SSOP footprint, preserve pin-to-pin connections, accept the same 7 V to 9.5 V supply, and provide compatible I2C control and filtering behavior. Request a formal cross-reference review through the XAIPART sourcing form rather than substituting a merely similar audio processor.
What is the best equivalent for the BD37503FV-E2?
The best equivalent for the BD37503FV-E2 is a device that combines a four-input selector, two-band equalizer, loudness filter, and second-order anti-aliasing filter in the same 20-pin SSOP footprint with compatible I2C behavior. No cross-brand drop-in equivalent is established by the available manufacturer and distributor records, so engineers should avoid assuming that a generic audio amplifier or digital sound processor is a direct replacement.
What are the key specifications of BD37503FV-E2 that engineers should know?
The key confirmed specifications are a 7 V to 9.5 V operating range, I2C control, four-input selection, a two-band bass and treble equalizer, switchable loudness processing, a switchable second-order anti-aliasing filter, and a 20-pin SSOP package. The device is an analog sound processor with support for single-ended and differential input combinations. Exact frequency points, gain limits, noise performance, and timing values require the manufacturer tables.

Impormasyon ng Talumpati sa Engineering for BD37503FV-E2 — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose the BD37503FV-E2 for compact analog audio systems that need a four-input selector, bass and treble equalization, switchable loudness processing, and optional second-order anti-aliasing filtering in one I2C-controlled device. It is particularly suitable when the system runs from a 7 V to 9.5 V supply and uses a conventional 20-pin SSOP footprint. Confirm that the source architecture supports single-ended or differential inputs and that the host controller can operate the device's I2C register interface. Do not choose it for a purely digital audio path, a supply outside the stated range, or a design requiring a different package. No pin-to-pin replacement is established by the available manufacturer and distributor records, so a redesign should be treated as an engineering project rather than a routine second-source substitution.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto
Package 20-pin SSOP
Brand ROHM Semiconductor
Product Type Analog sound processor
Operating Supply Voltage 7 V to 9.5 V
Control Interface I2C bus
Input Selector 4 inputs
Equalizer Bands 2 bands: bass and treble
Loudness Filter Switchable
Anti-Aliasing Filter Switchable second-order filter
Input Configuration Single-ended and differential input combinations

Pangunahing mga Pagkakaiba

  • Consolidates multiple analog sound-processing functions (kumpara saA discrete four-input selector, two-band equalizer, loudness filter, and anti-aliasing network)
  • Supports programmable source and filter control (kumpara saA manually adjusted analog tone-control circuit)
  • Offers selectable post-DAC filtering (kumpara saAn unfiltered DAC-to-amplifier signal path)

Talaan ng Disenyo

Keep the analog input, output, and filter paths compact and route them away from switching-node copper, inductors, high-current amplifier outputs, and digital clock lines. Use a continuous ground reference beneath the audio section and place the supply bypass capacitor close to the device power pins. The I2C traces should be short and isolated from sensitive audio inputs. Preserve the package land pattern and verify the exposed connections and pin numbering against the manufacturer footprint drawing before releasing the PCB files.

Establish the source gain structure before applying bass, treble, or loudness processing. The equalizer and loudness filters can alter the apparent level of individual frequency ranges, so incorrect upstream gain may cause clipping or make the loudness function ineffective. Evaluate each input with the selected equalizer and filter settings, and place any required attenuation or gain control ahead of the BD37503FV-E2. Confirm the full filter response and control resolution using the manufacturer frequency-response and register tables.

Design the supply for a steady operating range of 7 V to 9.5 V, including startup, load transitions, and tolerance. Place local high-frequency decoupling at the power pins and separate the audio supply path from noisy digital or switching-converter currents where the board architecture permits. Verify the device's permitted supply sequencing and absolute maximum limits in the manufacturer electrical tables. Do not infer a maximum transient or absolute maximum voltage from the normal operating range alone.

Do not select a generic amplifier, codec, or digital equalizer as a direct substitute merely because it also controls audio. A valid replacement must retain the 20-pin SSOP footprint, pin-to-pin connectivity, 7 V to 9.5 V supply compatibility, I2C register behavior, four-input selector, equalizer, loudness path, and anti-aliasing function. Likewise, do not assume the second-order anti-aliasing filter replaces a DAC reconstruction filter; validate it against the actual DAC output spectrum and operating mode.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

Compliance and qualification attributes are not stated in the available product records. The -E2 ordering suffix alone is not treated as proof of RoHS, REACH, AEC-Q100, lead-free, or halogen-free status.

Data napatotohanan sa: 2026-11-11 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

BD37503FV-E2 datasheet BD37503FV-E2 pinout BD37503FV-E2 datasheet pdf BD37503FV-E2 I2C audio processor BD37503FV-E2 4 input selector BD37503FV-E2 two band equalizer BD37503FV-E2 anti aliasing filter BD37503FV-E2 replacement BD37503FV-E2 equivalent BD37503FV-E2 20 pin SSOP ROHM BD37503FV-E2 BD37503FV-E2 application circuit

Mga kaugnay na Mga Komponente at mga Tuntunin

ROHM Semiconductor BD37503FV-E2 BD37503FV analog sound processor audio signal-processing IC audio special-purpose IC semiconductor two-band equalizer bass control treble control loudness filter second-order anti-aliasing filter four-input selector differential input single-ended input I2C DAC output noise 7 V to 9.5 V power supply 20-pin SSOP SSOP package family surface-mount package compact consumer audio active speaker automotive audio interface
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ