C8051F583-IQ - 50MHz 128KB 8-Bit MCU | Silicon Labs
MPN: C8051F583-IQ ✓ NakahandaC8051F583-IQ Ulas
An 8-bit microcontroller is a compact embedded-control IC combining a processor core, nonvolatile program memory, volatile working memory, and peripherals on one device. The C8051F58x family belongs to the 8051-compatible MCU hierarchy, where the CPU executes firmware while integrated converters and communication interfaces reduce the number of external components required in industrial and automotive control systems.
The C8051F583-IQ combines 50 MHz processing performance with 128 KB of in-circuit-programmable Flash and 8 KB of RAM. Its 12-bit ADC provides 25 conversion channels for analog sensing, while two UARTs, SPI, and I²C support common industrial, communications, and embedded-control peripherals. In-circuit Flash reprogramming supports field firmware updates without removing the device from its circuit.
The C8051F58x/F59x family integrates a voltage regulator, power-on reset, VDD monitor, watchdog timer, and clock oscillator. These blocks support a more self-contained system design by reducing the need for separate startup and monitoring components. The manufacturer data sheet also confirms that user software controls the on-chip peripherals and that Flash can retain firmware or nonvolatile data between power cycles.
Typical uses include industrial controllers, automotive and transportation modules, sensor-acquisition equipment, communications gateways, and compact embedded products. The 12-bit ADC is useful where higher resolution is preferable to a simple comparator-based measurement, while the combination of SPI, I²C, and two UARTs allows external sensors, transceivers, memories, and displays to share a practical peripheral set.
Designers should preserve the device's 1.8 V to 5.25 V operating limits and use the pin-description table in the manufacturer data sheet when assigning board tracks. The 32-LQFP footprint also requires adequate copper for power delivery and thermal performance. Firmware planning should account for the 8 KB RAM ceiling and include a brownout-safe update strategy before overwriting Flash.
This page combines package, memory, interface, and environmental details with practical replacement guidance. It also identifies the verified differences between the C8051F583-IQ and the closest documented family alternative, helping engineers make a footprint-aware decision before changing an approved design.
Mga alternatibo na pwedeng ilagay na C8051F583-IQ — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok C8051F583-IQ (parehas na form factor at footprint) — pagkakaiba sa Package, Product Type, ADC Resolution, ADC Throughput, Flash Memory.
C8051F586-IQ
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
C8051F583-IQ Mga Pinakamataas na Rating at Electrical Characteristics
| Product Type | 8-bit embedded microcontroller (MCU) |
| Series | C8051F58x |
| Processor Core | 8051-compatible 8-bit core |
| Maksimum na Taktiko ng Oras | 50 MHz |
| Performance Rate | 50 MIPS |
| Flash Memory | 128 KB |
| Flash Organization | 128K x 8 bits |
| RAM | 8 KB |
| ADC Resolution | 12 bits |
| ADC Channels | 25 channels |
| UART Count | 2 |
| SPI Interfaces | 1 |
| I²C Interfaces | 1 |
| GPIO Count | 8 pins |
| Operating Voltage Range | 1.8 V to 5.25 V |
| Hanay ng Temperature na Operasyon | -40°C to +125°C |
| Packhaging | 32-LQFP, 7 x 7 mm |
| Uri ng Pagpapasok | Surface mount |
| Integrated Voltage Regulator | Yes |
| Power-On Reset | Yes |
| VDD Monitor | Yes |
| Watchdog Timer | Yes |
| Clock Oscillator | Yes |
| In-Circuit Flash Programming | Yes |
| Tindminan RoHS | Compliant |
| AEC-Q100 Qualification | Qualified to AEC-Q100 specification |
Gabay sa Pin Configuration ng C8051F583-IQ 32-lqfp, 7 x 7 mm
Pin configuration para sa C8051F583-IQ (32-lqfp, 7 x 7 mm package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa C8051F583-IQ.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
C8051F583-IQ ay nararapat para sa 6 aplikasyons: Industrial Sensor Acquisition, Automotive Communication Modules, Communication Gateways, Motor and Machine Control, Field-Upgradeable Products, Compact Control Panels.
Industrial Sensor Acquisition
The C8051F583-IQ fits compact industrial sensor modules because its 12-bit, 25-channel ADC can acquire multiple analog inputs while the 50 MHz 8051-compatible core performs filtering, calibration, and control logic. Two UARTs, SPI, and I²C provide flexible links to sensors, external memory, and service interfaces. Its 128 KB of Flash stores application firmware and nonvolatile parameters, while 8 KB of RAM supports working buffers. The 1.8 V to 5.25 V range accommodates low-voltage sensor systems and more conventional industrial rails, subject to the complete power and grounding design.
Inirekomenda
Automotive Communication Modules
The C8051F583-IQ is appropriate for compact automotive communication and control modules requiring a 50 MHz MCU and a compact 32-LQFP footprint. The device family is identified as AEC-Q100 qualified and supports operation from -40°C to +125°C. Two UARTs can serve diagnostic or external serial links, while SPI and I²C support sensors, transceivers, and configuration devices. The 12-bit ADC can monitor mixed analog inputs. Firmware designers should use the manufacturer peripheral and pin-assignment documentation for every connected interface and validate timing at the intended clock and bus rates.
Inirekomenda
Communication Gateways
The C8051F583-IQ can serve as the control processor in a small protocol-conversion or communications gateway because it combines three serial interface types: two UARTs, SPI, and I²C. The 8051-compatible core executes at 50 MHz, allowing protocol handling to coexist with supervisory tasks and local data processing. Its 128 KB Flash accommodates firmware and configuration data, although the 8 KB RAM limit must be included in early buffer planning. The 32-LQFP 7 x 7 mm package also supports compact PCB layouts when routing, decoupling, and thermal requirements are addressed carefully.
Inirekomenda
Motor and Machine Control
The C8051F583-IQ provides the processing speed, mixed-signal capability, and serial connectivity needed for compact machine-control logic. Its 12-bit ADC can sample up to 25 analog channels for position, pressure, temperature, or current feedback, while the 50 MHz core executes control and protection algorithms. The two UARTs support tuning or diagnostic links, and SPI or I²C can connect to motion and sensing devices. With 128 KB Flash and 8 KB RAM, the device handles moderate firmware sizes and control buffers. Designers should confirm real-time timing and interface assignments using the manufacturer documentation.
Inirekomenda
Field-Upgradeable Products
The C8051F583-IQ is well suited to field-upgradeable products because its 128 KB Flash supports in-circuit reprogramming. Firmware or nonvolatile product data can be updated without removing the device from the circuit, reducing service complexity in deployed equipment. The integrated power-on reset, VDD monitor, watchdog timer, clock oscillator, and voltage regulator create a controlled operating foundation for embedded firmware. A robust update design should still include power-failure handling, image validation, and recovery logic, especially when the same Flash area contains application code and field data.
Inirekomenda
Compact Control Panels
The C8051F583-IQ can implement a compact control panel or local operator interface using its 12-bit ADC for analog controls and its serial peripherals for displays, keyboards, and external logic. The 50 MHz core provides enough throughput for local interaction, status handling, and supervisory control, while 128 KB Flash holds application code and interface definitions. Two UARTs can simplify connection of human-interface and service ports, and SPI or I²C can serve panel peripherals. The 32-LQFP footprint reduces board area, but designers should provide proper bypass capacitance and follow the manufacturer's power-pin and exposed-area guidance.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for C8051F583-IQ — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | C8051F586-IQ |
|---|---|---|
| Brand | Silicon Labs | Silicon Labs |
| Package | 32-LQFP (7x7 mm) | 32-LQFP (7x7 mm) |
| Core Architecture | 8051-compatible 8-bit | C8051F58x-family 8051-compatible core |
Pangunahing mga Pagkakaiba
- Higher Flash and RAM allocation than the C8051F560-IQ comparison candidate (kumpara saC8051F560-IQ)
- More GPIO than the eight-pin GPIO description of the Xecor comparison record (kumpara saC8051F583-IQR)
- Explicit 12-bit, 25-channel mixed-signal ADC (kumpara saC8051F586-IQ)
- Three serial-interface classes in one compact MCU (kumpara saC8051F580-IQ)
Talaan ng Disenyo
Place the required bypass capacitors adjacent to the device power pins and route the ground return directly into the device ground plane. The C8051F58x/F59x Data Sheet identifies an internal regulator, power-on reset, VDD monitor, watchdog timer, and oscillator, but external decoupling still determines supply noise at the pins. Keep oscillator and high-current return paths away from sensitive analog inputs to reduce coupling into the 12-bit ADC.
Design the supply for the complete 1.8 V to 5.25 V operating range and verify every peripheral and I/O pin against the selected operating mode. Do not infer external interface levels solely from the MCU supply voltage. Check the manufacturer pin-description and electrical-characteristics tables for every connected net, especially reset, programming, UART, SPI, I²C, and ADC resources. Brownout behavior and firmware state should also be tested because Flash updates may be interrupted by a power loss.
Treat C8051F586-IQ as a conditional family alternative rather than an automatic substitution. The cross-reference result identifies the MPN but does not confirm identical Flash, RAM, ADC-channel count, pin multiplexing, or boot behavior. Before changing an approved PCB, compare the exact ordering codes and manufacturer pin tables. Do not substitute C8051F580-IQ because it uses a 48-TQFP package rather than the target's 32-LQFP footprint.
Use the 32-LQFP 7 x 7 mm footprint and follow the manufacturer land pattern and pin-numbering conventions exactly. Keep analog inputs away from switching supplies and digital clock nets, and provide a low-impedance ground reference for the 12-bit ADC. Validate the schematic symbol and PCB footprint against the ordering-code-specific package documentation before fabrication, especially when an automotive production release is being prepared.
Impormasyon ng Pagsunod sa Kautusan
The product listing identifies RoHS compliance, while the manufacturer family page identifies the C8051F583 devices as AEC-Q100 qualified and tested for automotive and industrial use. Other compliance declarations are not stated in the available records.