C8051F583-IQ - 50MHz 128KB 8-Bit MCU | Silicon Labs
MPN: C8051F583-IQ ✓ 啟用中C8051F583-IQ 概覽
An 8-bit microcontroller is a compact embedded-control IC combining a processor core, nonvolatile program memory, volatile working memory, and peripherals on one device. The C8051F58x family belongs to the 8051-compatible MCU hierarchy, where the CPU executes firmware while integrated converters and communication interfaces reduce the number of external components required in industrial and automotive control systems.
The C8051F583-IQ combines 50 MHz processing performance with 128 KB of in-circuit-programmable Flash and 8 KB of RAM. Its 12-bit ADC provides 25 conversion channels for analog sensing, while two UARTs, SPI, and I²C support common industrial, communications, and embedded-control peripherals. In-circuit Flash reprogramming supports field firmware updates without removing the device from its circuit.
The C8051F58x/F59x family integrates a voltage regulator, power-on reset, VDD monitor, watchdog timer, and clock oscillator. These blocks support a more self-contained system design by reducing the need for separate startup and monitoring components. The manufacturer data sheet also confirms that user software controls the on-chip peripherals and that Flash can retain firmware or nonvolatile data between power cycles.
Typical uses include industrial controllers, automotive and transportation modules, sensor-acquisition equipment, communications gateways, and compact embedded products. The 12-bit ADC is useful where higher resolution is preferable to a simple comparator-based measurement, while the combination of SPI, I²C, and two UARTs allows external sensors, transceivers, memories, and displays to share a practical peripheral set.
Designers should preserve the device's 1.8 V to 5.25 V operating limits and use the pin-description table in the manufacturer data sheet when assigning board tracks. The 32-LQFP footprint also requires adequate copper for power delivery and thermal performance. Firmware planning should account for the 8 KB RAM ceiling and include a brownout-safe update strategy before overwriting Flash.
This page combines package, memory, interface, and environmental details with practical replacement guidance. It also identifies the verified differences between the C8051F583-IQ and the closest documented family alternative, helping engineers make a footprint-aware decision before changing an approved design.
直接替換替代品,適用於 C8051F583-IQ — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: C8051F583-IQ (相同外形與佔位) — 差異在於 Package, Product Type, ADC Resolution, ADC Throughput, Flash Memory.
C8051F586-IQ
✅ 直接替換📋 參考替代品(不在目錄中)
C8051F583-IQ 最大額定值與電氣特性
| Product Type | 8-bit embedded microcontroller (MCU) |
| Series | C8051F58x |
| Processor Core | 8051-compatible 8-bit core |
| 最大時脈頻率 | 50 MHz |
| Performance Rate | 50 MIPS |
| Flash Memory | 128 KB |
| Flash Organization | 128K x 8 bits |
| RAM | 8 KB |
| ADC Resolution | 12 bits |
| ADC Channels | 25 channels |
| UART Count | 2 |
| SPI Interfaces | 1 |
| I²C Interfaces | 1 |
| GPIO Count | 8 pins |
| Operating Voltage Range | 1.8 V to 5.25 V |
| 工作溫度範圍 | -40°C to +125°C |
| 封裝 | 32-LQFP, 7 x 7 mm |
| 安裝類型 | Surface mount |
| Integrated Voltage Regulator | Yes |
| Power-On Reset | Yes |
| VDD Monitor | Yes |
| Watchdog Timer | Yes |
| Clock Oscillator | Yes |
| In-Circuit Flash Programming | Yes |
| RoHS 狀態 | Compliant |
| AEC-Q100 Qualification | Qualified to AEC-Q100 specification |
C8051F583-IQ 32-lqfp, 7 x 7 mm 腳位配置指南
C8051F583-IQ(32-lqfp, 7 x 7 mm 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: C8051F583-IQ.
請參閱 資料表 以查看完整腳位配置。
典型應用
C8051F583-IQ 適用於 6 應用s: Industrial Sensor Acquisition, Automotive Communication Modules, Communication Gateways, Motor and Machine Control, Field-Upgradeable Products, Compact Control Panels.
Industrial Sensor Acquisition
The C8051F583-IQ fits compact industrial sensor modules because its 12-bit, 25-channel ADC can acquire multiple analog inputs while the 50 MHz 8051-compatible core performs filtering, calibration, and control logic. Two UARTs, SPI, and I²C provide flexible links to sensors, external memory, and service interfaces. Its 128 KB of Flash stores application firmware and nonvolatile parameters, while 8 KB of RAM supports working buffers. The 1.8 V to 5.25 V range accommodates low-voltage sensor systems and more conventional industrial rails, subject to the complete power and grounding design.
推薦
Automotive Communication Modules
The C8051F583-IQ is appropriate for compact automotive communication and control modules requiring a 50 MHz MCU and a compact 32-LQFP footprint. The device family is identified as AEC-Q100 qualified and supports operation from -40°C to +125°C. Two UARTs can serve diagnostic or external serial links, while SPI and I²C support sensors, transceivers, and configuration devices. The 12-bit ADC can monitor mixed analog inputs. Firmware designers should use the manufacturer peripheral and pin-assignment documentation for every connected interface and validate timing at the intended clock and bus rates.
推薦
Communication Gateways
The C8051F583-IQ can serve as the control processor in a small protocol-conversion or communications gateway because it combines three serial interface types: two UARTs, SPI, and I²C. The 8051-compatible core executes at 50 MHz, allowing protocol handling to coexist with supervisory tasks and local data processing. Its 128 KB Flash accommodates firmware and configuration data, although the 8 KB RAM limit must be included in early buffer planning. The 32-LQFP 7 x 7 mm package also supports compact PCB layouts when routing, decoupling, and thermal requirements are addressed carefully.
推薦
Motor and Machine Control
The C8051F583-IQ provides the processing speed, mixed-signal capability, and serial connectivity needed for compact machine-control logic. Its 12-bit ADC can sample up to 25 analog channels for position, pressure, temperature, or current feedback, while the 50 MHz core executes control and protection algorithms. The two UARTs support tuning or diagnostic links, and SPI or I²C can connect to motion and sensing devices. With 128 KB Flash and 8 KB RAM, the device handles moderate firmware sizes and control buffers. Designers should confirm real-time timing and interface assignments using the manufacturer documentation.
推薦
Field-Upgradeable Products
The C8051F583-IQ is well suited to field-upgradeable products because its 128 KB Flash supports in-circuit reprogramming. Firmware or nonvolatile product data can be updated without removing the device from the circuit, reducing service complexity in deployed equipment. The integrated power-on reset, VDD monitor, watchdog timer, clock oscillator, and voltage regulator create a controlled operating foundation for embedded firmware. A robust update design should still include power-failure handling, image validation, and recovery logic, especially when the same Flash area contains application code and field data.
推薦
Compact Control Panels
The C8051F583-IQ can implement a compact control panel or local operator interface using its 12-bit ADC for analog controls and its serial peripherals for displays, keyboards, and external logic. The 50 MHz core provides enough throughput for local interaction, status handling, and supervisory control, while 128 KB Flash holds application code and interface definitions. Two UARTs can simplify connection of human-interface and service ports, and SPI or I²C can serve panel peripherals. The 32-LQFP footprint reduces board area, but designers should provide proper bypass capacitance and follow the manufacturer's power-pin and exposed-area guidance.
推薦
推薦產品摘要
工程參考資料,適用於 C8051F583-IQ — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | C8051F586-IQ |
|---|---|---|
| Brand | Silicon Labs | Silicon Labs |
| Package | 32-LQFP (7x7 mm) | 32-LQFP (7x7 mm) |
| Core Architecture | 8051-compatible 8-bit | C8051F58x-family 8051-compatible core |
主要差異化特點
- Higher Flash and RAM allocation than the C8051F560-IQ comparison candidate (對比C8051F560-IQ)
- More GPIO than the eight-pin GPIO description of the Xecor comparison record (對比C8051F583-IQR)
- Explicit 12-bit, 25-channel mixed-signal ADC (對比C8051F586-IQ)
- Three serial-interface classes in one compact MCU (對比C8051F580-IQ)
設計說明
Place the required bypass capacitors adjacent to the device power pins and route the ground return directly into the device ground plane. The C8051F58x/F59x Data Sheet identifies an internal regulator, power-on reset, VDD monitor, watchdog timer, and oscillator, but external decoupling still determines supply noise at the pins. Keep oscillator and high-current return paths away from sensitive analog inputs to reduce coupling into the 12-bit ADC.
Design the supply for the complete 1.8 V to 5.25 V operating range and verify every peripheral and I/O pin against the selected operating mode. Do not infer external interface levels solely from the MCU supply voltage. Check the manufacturer pin-description and electrical-characteristics tables for every connected net, especially reset, programming, UART, SPI, I²C, and ADC resources. Brownout behavior and firmware state should also be tested because Flash updates may be interrupted by a power loss.
Treat C8051F586-IQ as a conditional family alternative rather than an automatic substitution. The cross-reference result identifies the MPN but does not confirm identical Flash, RAM, ADC-channel count, pin multiplexing, or boot behavior. Before changing an approved PCB, compare the exact ordering codes and manufacturer pin tables. Do not substitute C8051F580-IQ because it uses a 48-TQFP package rather than the target's 32-LQFP footprint.
Use the 32-LQFP 7 x 7 mm footprint and follow the manufacturer land pattern and pin-numbering conventions exactly. Keep analog inputs away from switching supplies and digital clock nets, and provide a low-impedance ground reference for the 12-bit ADC. Validate the schematic symbol and PCB footprint against the ordering-code-specific package documentation before fabrication, especially when an automotive production release is being prepared.
合規資訊
The product listing identifies RoHS compliance, while the manufacturer family page identifies the C8051F583 devices as AEC-Q100 qualified and tested for automotive and industrial use. Other compliance declarations are not stated in the available records.