CD40160BE - 4-Bit Synchronous Decade Counter | Texas Instruments
MPN: CD40160BE ✓ NakahandaCD40160BE Ulas
A synchronous decade counter is a logic IC that advances all registered output bits on the active clock edge. The CD40160BE belongs to the CD4000 CMOS logic family, placing it within the hierarchy of CMOS logic IC, counter, decade counter, and digital logic IC. Unlike asynchronous ripple counters, its synchronous architecture prevents ripple-related timing uncertainty between internal count stages, making the output states more predictable for downstream decoding and control logic.
The counter supports programmable decade operation through its load, count-enable, and asynchronous-clear controls. These controls allow the count sequence to be loaded, held, cleared, or advanced under external logic. The 4-bit parallel outputs expose the current BCD decade state, while the asynchronous clear input provides a direct method for resetting the count independently of the clock state. Its CMOS implementation also supports operation across a wide supply-voltage range suitable for both legacy 5 V systems and modern low-voltage digital control.
The Texas Instruments product family documentation identifies CD40160B as a CMOS synchronous programmable 4-bit decade counter with asynchronous clear. The E suffix identifies the military-temperature product in a 16-pin PDIP package. According to the manufacturer family documentation, CD40160B is functionally equivalent to and pin-compatible with the 74LS160 TTL counter family, allowing designers to compare CMOS and TTL implementations when upgrading legacy equipment.
Typical uses include decade-based digital clocks, sequential industrial timers, laboratory counters, pulse-counting modules, and embedded timing controllers. Because the outputs represent decimal decades rather than unrestricted binary values, the device is especially useful when the next stage must display or control a decimal count. The external load and enable inputs also permit cascading or coordinating multiple counting channels in larger equipment.
For reliable operation, keep the asynchronous clear and control inputs away from noisy switching paths, and observe the manufacturer’s specified input transition limits. Confirm signal levels, clock pulse width, and supply decoupling against the CD40160B datasheet before using the counter with modern 3.3 V logic. The DIP package also requires adequate spacing and routing around the through-hole footprint on legacy-style boards.
This page combines the CD40160BE function, pin-compatible TTL-counter relationship, practical implementation guidance, and qualified replacement information. It also identifies the principal design trade-offs among CMOS and TTL counter options so engineers can select a replacement without changing the 16-pin through-hole footprint.
Mga alternatibo na pwedeng ilagay na CD40160BE — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
HCF40160BEY
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
CD40160BE
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →CD40160BE Mga Pinakamataas na Rating at Electrical Characteristics
| Logic Type | CMOS synchronous programmable 4-bit decade counter |
| Counter Output | 4-bit binary-coded decimal decade output |
| Count Sequence | 0 to 9 |
| Clocking | Synchronous |
| Clear Function | Asynchronous clear |
| Supply Voltage Range | 3 V to 18 V |
| Number of Terminals | 16 terminals |
| Terminal Form | Through-hole |
| Package Code | DIP |
| Package Shape | Rectangular |
| Temperature Grade | Military |
| Logic Family | CD4000 CMOS series |
| TTL Compatibility | Functionally equivalent and pin-compatible with 74LS160 |
Gabay sa Pin Configuration ng CD40160BE rectangular
Pin configuration para sa CD40160BE (rectangular package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa CD40160BE.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
CD40160BE ay nararapat para sa 6 aplikasyons: Digital Clock and Timer, Industrial Pulse Counter, Laboratory Frequency Divider, Legacy TTL Equipment Upgrade, Programmable Sequential Control, Test and Measurement Counter.
Digital Clock and Timer
The CD40160BE suits clock and timer designs that need a true decimal count rather than a free-running binary sequence. Each clock edge advances the four outputs through the BCD states 0 to 9, allowing the value to be decoded directly for decimal display or timekeeping. The load input can establish an initial count, the count-enable inputs can pause progression, and the asynchronous clear can reset the state without waiting for a clock edge. Because the part is a CMOS synchronous counter with a 3 V to 18 V supply range, it supports both traditional 5 V logic and lower-voltage control systems. Use the manufacturer pin-description table to connect the active clock, control inputs, and parallel outputs, and place supply bypassing close to the device.
Inirekomenda
Industrial Pulse Counter
The CD40160BE can count filtered sensor or machine pulses while presenting a decimal state to control and monitoring circuitry. Its 4-bit synchronous decade output is appropriate when each count increment represents one complete unit of ten rather than an arbitrary binary total. The enable inputs allow the count to advance only during a defined measurement interval, and the load function permits a repeatable starting value for each batch or production cycle. Asynchronous clear provides an immediate reset after an event or fault. In an industrial environment, route clock and control traces away from motor and switching-node edges, use a Schmitt trigger when the source signal has slow transitions, and verify operating temperature and supply limits against the military-grade ordering option.
Inirekomenda
Laboratory Frequency Divider
The CD40160BE provides predictable decade stages for laboratory counters, dividers, and repetitive sequencing fixtures. Dividing a stable clock by ten is useful when a panel instrument, recorder, or timing reference requires a lower-rate decimal pulse. Because counting is synchronous, the device avoids the cumulative propagation uncertainty associated with a chain of asynchronous ripple stages. The external controls also support engineering modes such as loading a preset state, holding the count, or clearing it between measurements. Keep the input clock edge clean and respect the manufacturer’s specified clock pulse-width limits. For long acquisition sequences, initialize the counter through the load or clear controls in a defined order so downstream logic does not observe an unintended intermediate count.
Inirekomenda
Legacy TTL Equipment Upgrade
The CD40160BE is a practical upgrade candidate for legacy equipment built around the 74LS160 because Texas Instruments documents the CD40160B as functionally equivalent and pin-compatible with the TTL counter family. Designers can preserve the existing 16-pin through-hole layout while moving the counter toward CMOS technology and its 3 V to 18 V operating range. This is especially useful when replacing older TTL logic with a mixed-voltage design or reducing system power. The substitution is not automatic: check clock-edge behavior, input thresholds, output levels, reset timing, and supply requirements on every connected net. Where the original board combines TTL outputs with CMOS inputs, confirm that the voltage levels and noise margins remain valid in the revised power architecture.
Inirekomenda
Programmable Sequential Control
The CD40160BE can form the decimal sequencing element of a programmable control system in which external logic determines when counting starts, stops, reloads, or resets. Its 4-bit parallel outputs make the decade state available for decoding into ten mutually exclusive control signals. The asynchronous clear allows a safety or supervisory circuit to reset the sequence immediately, while the load input supports repeatable presets. This arrangement is useful in relay sequencing, batch controls, teaching panels, and test fixtures where a decimal progression is more natural than binary counting. Define a deterministic priority for clear, load, enable, and clock inputs, and avoid placing asynchronous clear close to high-current switching edges. Confirm all decoded outputs during reset and loading before allowing them to control external equipment.
Inirekomenda
Test and Measurement Counter
The CD40160BE is useful in test fixtures that need a compact decade-counting stage alongside legacy CMOS or TTL instrumentation. A measured input can be clocked into the counter, while load and enable controls establish the start condition and acquisition window. The four parallel outputs can then feed a display decoder, comparator, status indicator, or data-capture interface. The wide CMOS supply range supports integration into equipment operating from legacy 5 V rails, while the 16-pin PDIP package simplifies replacement on older through-hole boards. Keep the measured signal conditioned so its transitions meet the datasheet input requirements, and account for propagation delay when synchronizing the count with an external trigger. Decouple the supply locally and use consistent grounding between the counter and downstream logic to minimize noise-induced count errors.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for CD40160BE — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | HCF40160BEY | CD40160BE |
|---|---|---|---|
| Brand | Texas Instruments | STMicroelectronics | Renesas Electronics |
| Package | 16-pin PDIP | 16-pin PDIP | 16-pin PDIP |
| Counter Type | Single 4-bit synchronous decade counter | Single 4-bit synchronous decade counter | 4-bit synchronous decade counter |
| Logic Technology | CMOS | CMOS | CMOS |
| Asynchronous Clear | Yes | Yes | Yes |
Pangunahing mga Pagkakaiba
- Provides a military-temperature ordering option in a serviceable through-hole package (kumpara saHCF40160BEY)
- Maintains a documented relationship with the widely used 74LS160 counter (kumpara saHCF40160BEY)
- Uses a broad CMOS supply range for legacy and lower-voltage systems (kumpara saCD40160BE)
Talaan ng Disenyo
Treat the clock as the critical timing net because every counter state advances synchronously on its active edge. Route it away from inductive switching nodes and relay contacts, use a ground reference that remains stable through the measurement interval, and condition noisy sensor signals before they reach the clock input. If the source can cross the input threshold slowly, insert a suitable Schmitt-trigger stage rather than allowing a long transition region to generate an uncertain clock event.
Define the control priority used by the external logic before connecting asynchronous clear, load, and count-enable inputs. Resetting while loading or counting can otherwise produce a transition that differs from the assumed operating sequence. Also verify the required clock edge and pulse width in the manufacturer datasheet, particularly when a mechanical switch, relay contact, or RC-filtered oscillator drives the counter.
Place the supply-decoupling capacitor close to the device supply and ground pins, and keep the clock and control traces short on the 16-pin PDIP footprint. The through-hole package is convenient for serviceable legacy equipment, but it does not eliminate the need for controlled layout. Keep switching-regulator nodes and high-current return paths away from the clock trace, and use a consistent ground strategy between the counter and connected display or control circuitry.
Impormasyon ng Pagsunod sa Kautusan
The military temperature grade identifies environmental robustness, not AEC-Q100 qualification. Compliance declarations were not established by the cited product records.