CS5511-ASZ - 16-Bit Delta-Sigma ADC | Cirrus Logic
MPN: CS5511-ASZ ✗ Tapus ng BuhayCS5511-ASZ Ulas
A sigma-delta ADC is a voltage-to-digital converter that uses charge balancing, oversampling, and digital filtering to obtain high resolution from relatively low-resolution internal converters. Within the data-converter hierarchy, the CS5511-ASZ belongs to the sigma-delta ADC family and is used where slow analog signals must be digitized with compact circuitry, low power, and minimal external support. The device is especially useful when 16-bit nominal resolution, flexible supply operation, and a compact serial interface are more important than high-speed acquisition.
Key features include 16-bit nominal resolution, a bipolar analog input, an integrated modulator, an on-chip digital filter, multiplexers, and an internal oscillator. The 4.75 V to 5.25 V operating range supports conventional 5 V analog and digital systems. Noise-free resolution is specified to 17 bits by the manufacturer datasheet, while the 53.5 samples-per-second conversion rate suits temperature, pressure, position, and other slowly changing physical measurements rather than waveform or audio sampling.
The internal oscillator and integrated filtering simplify PCB implementation by removing the external master-clock and most analog reconstruction-filter requirements. A SPI-compatible serial interface provides compact communication with a host controller, while the multiplexed input structure can consolidate measurements from multiple analog sources when the selected configuration supports them. Because the converter uses a charge-balancing architecture, the usable input bandwidth and output-data rate remain constrained by the modulator and digital-filter implementation.
Typical applications include industrial process monitoring, environmental sensors, pressure and temperature instrumentation, portable measurement equipment, and low-speed closed-loop control systems. It is also appropriate for battery-powered designs that value a compact eight-pin package and an internal clock. For designs requiring faster conversion, greater input bandwidth, a lower-power architecture, or a different external interface, a separate ADC family should be evaluated before the footprint is committed.
Design the analog input path around the datasheet input range and reference requirements, including adequate source impedance and filtering for the selected mux channel. Place input bypass capacitance close to the supply and ground pins, route analog and serial interface traces away from switching nodes, and verify that the internal oscillator supports the required output rate. Confirm the exact pin configuration and signal names in the manufacturer pin-description table before assigning PCB tracks.
This page combines the manufacturer device overview, package and operating characteristics, same-family drop-in options, comparison parameters, and practical implementation guidance. These engineering details help designers determine whether the CS5511-ASZ fits a precision, low-speed measurement design without relying on raw catalog descriptions alone.
Mga alternatibo na pwedeng ilagay na CS5511-ASZ — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok CS5511-ASZ (parehas na form factor at footprint) — pagkakaiba sa Converter Type, Package.
CS5511-AS
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →CS5511-ASZR
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
CS5510-ASZ
✅ Drop-In ⚠️ Mga Talaan Hindi NaiwerikmoMagkontak para sa presyo
Tingnan ang Datasheet →CS5512-ASZ
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
CS5511-ASZ Mga Pinakamataas na Rating at Electrical Characteristics
| Converter Type | Sigma-delta analog-to-digital converter |
| Nominal Resolution | 16 bit |
| Noise-Free Resolution | Up to 17 bit |
| Number of Inputs | 1 input |
| Input Type | Bipolar |
| Conversion Rate | 53.5 samples/s |
| Supply Voltage Range | 4.75 V to 5.25 V |
| Hanay ng Temperature na Operasyon | -40°C to +85°C |
| Internal Oscillator | Yes |
| Modulator | Integrated |
| Digital Filter | Built-in |
| Multiplexer | Integrated |
| Serial Interface | SPI |
| Packhaging | SOIC-8-208mil |
| Uri ng Pagpapasok | Surface mount |
| Tindminan RoHS | Compliant |
Gabay sa Pin Configuration ng CS5511-ASZ soic-8-208mil
Pin configuration para sa CS5511-ASZ (soic-8-208mil package). Ang analog component na ito ay may input, output, at power supply pins. Sumangguni sa datasheet ng manufacturer para sa offset null, compensation, at enable pin configurations. Perpekto para sa signal conditioning at amplifier circuits.
Wala ng detalyadong pinout data na magagamit para sa CS5511-ASZ.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
CS5511-ASZ ay nararapat para sa 6 aplikasyons: Industrial Process Measurement, Temperature Monitoring, Pressure Sensor Interface, Battery-Powered Sensor Node, Environmental Data Acquisition, Low-Speed Closed-Loop Control.
Industrial Process Measurement
The CS5511-ASZ fits slow industrial process measurements because it combines 16-bit nominal resolution with a 53.5 samples-per-second conversion rate. Its bipolar input can accommodate conditioned sensor signals, while the integrated modulator and built-in digital filter reduce the need for separate filtering stages. The 4.75 V to 5.25 V supply range suits conventional industrial analog sections. Place the converter close to the sensor interface, maintain a low-noise ground path, and verify that the filtered output rate satisfies the control-loop update requirement.
Inirekomenda
Temperature Monitoring
A temperature probe changes slowly compared with the CS5511-ASZ conversion rate, making the device suitable for thermal monitoring and environmental logging. Its 16-bit nominal resolution and up to 17-bit noise-free resolution provide a dense digital representation for sensor conditioning, while the internal oscillator removes a separate clock circuit. Use an RC input filter sized for the probe and cable capacitance, bypass the 5 V supply locally, and confirm that the bipolar input range accommodates the conditioned sensor voltage.
Inirekomenda
Pressure Sensor Interface
The CS5511-ASZ can digitize the output of a bridge-based or resistive pressure sensor after suitable amplification and excitation. A 53.5 samples-per-second rate is appropriate for pressure trends, tank levels, and actuator feedback rather than rapid transients, and the integrated digital filter helps suppress broadband noise. Keep the excitation and analog signal paths separated from digital switching nodes. Select input and reference components from the manufacturer electrical tables, and confirm the sensor's full-scale output fits the converter's bipolar input range.
Inirekomenda
Battery-Powered Sensor Node
The CS5511-ASZ is useful in battery-powered environmental sensor nodes because its internal oscillator and integrated filtering reduce external component count. The 8-pin SOIC-208mil package supports compact board layouts, while the 4.75 V to 5.25 V operating range requires a regulated 5 V rail or suitable conversion stage. Size the energy budget around the device and rail behavior shown in the manufacturer documentation, and avoid placing high-current switching circuitry beside the analog input or reference connections.
Inirekomenda
Environmental Data Acquisition
The CS5511-ASZ is well matched to long-term environmental acquisition for humidity, gas, and ambient-condition sensors whose signals vary slowly. Its 16-bit nominal output, built-in digital filter, and 53.5 samples-per-second conversion rate support stable readings without a high-speed converter. The SPI interface allows a host controller to retrieve results from a compact mixed-signal board. Apply channel-specific analog filtering, provide local supply bypass capacitance, and validate cable-induced noise and ground offsets before calibrating the measurement chain.
Inirekomenda
Low-Speed Closed-Loop Control
The CS5511-ASZ can serve as the measurement element in a low-speed closed-loop system controlling heaters, valves, or regulated actuators. Its 53.5 samples-per-second output rate provides periodic feedback for slow loops, and the built-in filter helps reject noise around the sensed variable. The converter should be isolated from switching regulator edges and high-current return paths. Define loop latency around the actual filtered data rate, and use a different ADC when the control loop needs substantially faster updates or wider bandwidth.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for CS5511-ASZ — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | CS5511-AS | CS5511-ASZR | CS5510-ASZ | CS5512-ASZ |
|---|---|---|---|---|---|
| Package | SOIC-8-208mil | SOIC-8-208mil | SOIC-8-208mil | SOIC-8-208mil | SOIC-8-208mil |
| Brand | Cirrus Logic | Cirrus Logic | Cirrus Logic | Cirrus Logic | Cirrus Logic |
| Converter Architecture | Sigma-delta ADC | Sigma-delta ADC | Sigma-delta ADC | Sigma-delta ADC | Sigma-delta ADC |
| Nominal Resolution | 16 bit | 16 bit | 16 bit | 16 bit | 20 bit |
| Lifecycle Status | Discontinued family | Discontinued family | Discontinued family | Discontinued family | Discontinued family |
Pangunahing mga Pagkakaiba
- Same-family 16-bit conversion with integrated oscillator (kumpara saCS5512-ASZ)
- No external master-clock circuit required (kumpara saCS5510-ASZ)
- Compact 8-pin implementation with integrated filtering (kumpara saCS5511-AS)
Talaan ng Disenyo
Place the supply bypass capacitor adjacent to the device's power and ground pins, and keep the analog input route short and away from serial clock and switching-node traces. The internal oscillator and digital filter reduce external circuitry, but they do not prevent PCB-coupled noise from entering the analog input. Use a continuous ground plane where practical and route analog returns independently from high-current return paths.
Use the manufacturer pin-description table to assign all eight SOIC connections and preserve the documented mux, reference, and serial-interface configuration. The SPI clock can inject timing-related disturbance into the analog section if long, unterminated, or routed parallel to the input. Keep the clock and data routes away from the analog node, provide a suitable return path beneath the interface, and test the assembled board with the intended oscillator and cable environment.
The accepted supply range is 4.75 V to 5.25 V, so the rail must remain within those limits during startup, load changes, and disturbances. Check the minimum voltage at the device pins rather than relying only on the source specification. Use a regulator with suitable transient response and verify that bypass capacitance satisfies the stability and filtering requirements shown in the manufacturer documentation.
Do not treat the 16-bit nominal resolution as a guaranteed 16-bit absolute accuracy over all conditions. Linearity, offset, gain, reference accuracy, noise, and the selected digital-filter configuration affect the usable result. Establish an end-to-end calibration budget for the sensor, analog front end, reference, converter, and system offset before defining the measurement resolution.
Impormasyon ng Pagsunod sa Kautusan
The product listing identifies the CS5511-ASZ as ROHS compliant. No AEC-Q100 qualification or separate REACH, lead-free, halogen-free, or conflict-minerals declaration was identified for this ordering code.