CS5511-ASZ - 16-Bit Delta-Sigma ADC | Cirrus Logic
料号: CS5511-ASZ ✗ 停产CS5511-ASZ 概述
A sigma-delta ADC is a voltage-to-digital converter that uses charge balancing, oversampling, and digital filtering to obtain high resolution from relatively low-resolution internal converters. Within the data-converter hierarchy, the CS5511-ASZ belongs to the sigma-delta ADC family and is used where slow analog signals must be digitized with compact circuitry, low power, and minimal external support. The device is especially useful when 16-bit nominal resolution, flexible supply operation, and a compact serial interface are more important than high-speed acquisition.
Key features include 16-bit nominal resolution, a bipolar analog input, an integrated modulator, an on-chip digital filter, multiplexers, and an internal oscillator. The 4.75 V to 5.25 V operating range supports conventional 5 V analog and digital systems. Noise-free resolution is specified to 17 bits by the manufacturer datasheet, while the 53.5 samples-per-second conversion rate suits temperature, pressure, position, and other slowly changing physical measurements rather than waveform or audio sampling.
The internal oscillator and integrated filtering simplify PCB implementation by removing the external master-clock and most analog reconstruction-filter requirements. A SPI-compatible serial interface provides compact communication with a host controller, while the multiplexed input structure can consolidate measurements from multiple analog sources when the selected configuration supports them. Because the converter uses a charge-balancing architecture, the usable input bandwidth and output-data rate remain constrained by the modulator and digital-filter implementation.
Typical applications include industrial process monitoring, environmental sensors, pressure and temperature instrumentation, portable measurement equipment, and low-speed closed-loop control systems. It is also appropriate for battery-powered designs that value a compact eight-pin package and an internal clock. For designs requiring faster conversion, greater input bandwidth, a lower-power architecture, or a different external interface, a separate ADC family should be evaluated before the footprint is committed.
Design the analog input path around the datasheet input range and reference requirements, including adequate source impedance and filtering for the selected mux channel. Place input bypass capacitance close to the supply and ground pins, route analog and serial interface traces away from switching nodes, and verify that the internal oscillator supports the required output rate. Confirm the exact pin configuration and signal names in the manufacturer pin-description table before assigning PCB tracks.
This page combines the manufacturer device overview, package and operating characteristics, same-family drop-in options, comparison parameters, and practical implementation guidance. These engineering details help designers determine whether the CS5511-ASZ fits a precision, low-speed measurement design without relying on raw catalog descriptions alone.
直接替换替代料: CS5511-ASZ ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: CS5511-ASZ (相同外形与封装尺寸) ——差异在于 Converter Type, Package.
CS5511-AS
✅ 直接替换联系询价
查看数据手册 →CS5511-ASZR
✅ 直接替换📋 参考替代料(不在目录中)
CS5510-ASZ
✅ 直接替换 ⚠️ 规格未核验联系询价
查看数据手册 →CS5512-ASZ
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
CS5511-ASZ 最大额定值与电气特性
| Converter Type | Sigma-delta analog-to-digital converter |
| Nominal Resolution | 16 bit |
| Noise-Free Resolution | Up to 17 bit |
| Number of Inputs | 1 input |
| Input Type | Bipolar |
| Conversion Rate | 53.5 samples/s |
| Supply Voltage Range | 4.75 V to 5.25 V |
| 工作温度范围 | -40°C to +85°C |
| Internal Oscillator | Yes |
| Modulator | Integrated |
| Digital Filter | Built-in |
| Multiplexer | Integrated |
| Serial Interface | SPI |
| 封装 | SOIC-8-208mil |
| 安装类型 | Surface mount |
| RoHS 状态 | Compliant |
CS5511-ASZ soic-8-208mil 引脚配置指南
CS5511-ASZ(soic-8-208mil 封装)的引脚配置。 该模拟元件具有输入、输出和电源引脚。请参阅制造商数据手册以了解失调调零、补偿和使能引脚配置。适用于信号调理和放大器电路。
暂无详细引脚数据: CS5511-ASZ.
请参阅 数据手册 以查看完整引脚配置。
典型应用
CS5511-ASZ 适用于 6 应用s: Industrial Process Measurement, Temperature Monitoring, Pressure Sensor Interface, Battery-Powered Sensor Node, Environmental Data Acquisition, Low-Speed Closed-Loop Control.
Industrial Process Measurement
The CS5511-ASZ fits slow industrial process measurements because it combines 16-bit nominal resolution with a 53.5 samples-per-second conversion rate. Its bipolar input can accommodate conditioned sensor signals, while the integrated modulator and built-in digital filter reduce the need for separate filtering stages. The 4.75 V to 5.25 V supply range suits conventional industrial analog sections. Place the converter close to the sensor interface, maintain a low-noise ground path, and verify that the filtered output rate satisfies the control-loop update requirement.
推荐
Temperature Monitoring
A temperature probe changes slowly compared with the CS5511-ASZ conversion rate, making the device suitable for thermal monitoring and environmental logging. Its 16-bit nominal resolution and up to 17-bit noise-free resolution provide a dense digital representation for sensor conditioning, while the internal oscillator removes a separate clock circuit. Use an RC input filter sized for the probe and cable capacitance, bypass the 5 V supply locally, and confirm that the bipolar input range accommodates the conditioned sensor voltage.
推荐
Pressure Sensor Interface
The CS5511-ASZ can digitize the output of a bridge-based or resistive pressure sensor after suitable amplification and excitation. A 53.5 samples-per-second rate is appropriate for pressure trends, tank levels, and actuator feedback rather than rapid transients, and the integrated digital filter helps suppress broadband noise. Keep the excitation and analog signal paths separated from digital switching nodes. Select input and reference components from the manufacturer electrical tables, and confirm the sensor's full-scale output fits the converter's bipolar input range.
推荐
Battery-Powered Sensor Node
The CS5511-ASZ is useful in battery-powered environmental sensor nodes because its internal oscillator and integrated filtering reduce external component count. The 8-pin SOIC-208mil package supports compact board layouts, while the 4.75 V to 5.25 V operating range requires a regulated 5 V rail or suitable conversion stage. Size the energy budget around the device and rail behavior shown in the manufacturer documentation, and avoid placing high-current switching circuitry beside the analog input or reference connections.
推荐
Environmental Data Acquisition
The CS5511-ASZ is well matched to long-term environmental acquisition for humidity, gas, and ambient-condition sensors whose signals vary slowly. Its 16-bit nominal output, built-in digital filter, and 53.5 samples-per-second conversion rate support stable readings without a high-speed converter. The SPI interface allows a host controller to retrieve results from a compact mixed-signal board. Apply channel-specific analog filtering, provide local supply bypass capacitance, and validate cable-induced noise and ground offsets before calibrating the measurement chain.
推荐
Low-Speed Closed-Loop Control
The CS5511-ASZ can serve as the measurement element in a low-speed closed-loop system controlling heaters, valves, or regulated actuators. Its 53.5 samples-per-second output rate provides periodic feedback for slow loops, and the built-in filter helps reject noise around the sensed variable. The converter should be isolated from switching regulator edges and high-current return paths. Define loop latency around the actual filtered data rate, and use a different ADC when the control loop needs substantially faster updates or wider bandwidth.
推荐
推荐产品汇总
工程参考数据: CS5511-ASZ ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | CS5511-AS | CS5511-ASZR | CS5510-ASZ | CS5512-ASZ |
|---|---|---|---|---|---|
| Package | SOIC-8-208mil | SOIC-8-208mil | SOIC-8-208mil | SOIC-8-208mil | SOIC-8-208mil |
| Brand | Cirrus Logic | Cirrus Logic | Cirrus Logic | Cirrus Logic | Cirrus Logic |
| Converter Architecture | Sigma-delta ADC | Sigma-delta ADC | Sigma-delta ADC | Sigma-delta ADC | Sigma-delta ADC |
| Nominal Resolution | 16 bit | 16 bit | 16 bit | 16 bit | 20 bit |
| Lifecycle Status | Discontinued family | Discontinued family | Discontinued family | Discontinued family | Discontinued family |
关键差异点
- Same-family 16-bit conversion with integrated oscillator (对比 CS5512-ASZ)
- No external master-clock circuit required (对比 CS5510-ASZ)
- Compact 8-pin implementation with integrated filtering (对比 CS5511-AS)
设计说明
Place the supply bypass capacitor adjacent to the device's power and ground pins, and keep the analog input route short and away from serial clock and switching-node traces. The internal oscillator and digital filter reduce external circuitry, but they do not prevent PCB-coupled noise from entering the analog input. Use a continuous ground plane where practical and route analog returns independently from high-current return paths.
Use the manufacturer pin-description table to assign all eight SOIC connections and preserve the documented mux, reference, and serial-interface configuration. The SPI clock can inject timing-related disturbance into the analog section if long, unterminated, or routed parallel to the input. Keep the clock and data routes away from the analog node, provide a suitable return path beneath the interface, and test the assembled board with the intended oscillator and cable environment.
The accepted supply range is 4.75 V to 5.25 V, so the rail must remain within those limits during startup, load changes, and disturbances. Check the minimum voltage at the device pins rather than relying only on the source specification. Use a regulator with suitable transient response and verify that bypass capacitance satisfies the stability and filtering requirements shown in the manufacturer documentation.
Do not treat the 16-bit nominal resolution as a guaranteed 16-bit absolute accuracy over all conditions. Linearity, offset, gain, reference accuracy, noise, and the selected digital-filter configuration affect the usable result. Establish an end-to-end calibration budget for the sensor, analog front end, reference, converter, and system offset before defining the measurement resolution.
合规信息
The product listing identifies the CS5511-ASZ as ROHS compliant. No AEC-Q100 qualification or separate REACH, lead-free, halogen-free, or conflict-minerals declaration was identified for this ordering code.