Infineon

CY8C3446LTI-072 - 50MHz 8-Bit PSoC 3 MCU | Infineon

MPN: CY8C3446LTI-072 ✓ Nakahanda
68-QFN Package 50 MHz Speed 64 KB Memory
MOQ: 1 |

CY8C3446LTI-072 Ulas

The Infineon CY8C3446LTI-072 is an 8-bit PSoC 3 CY8C34xx microcontroller with an 8051 CPU, a maximum clock frequency of 50 MHz, and 64 KB of embedded flash memory in a 68-QFN package measuring 8 mm by 8 mm. It combines programmable digital and analog resources with embedded microcontroller functionality for compact embedded-control designs.

A programmable system on chip, or PSoC, integrates a CPU, programmable digital blocks, analog peripherals, and memory into one device. The PSoC 3 architecture places the CY8C34xx family in the broader hierarchy of embedded microcontroller, embedded processor, and semiconductor. This integration allows designers to configure digital logic and analog functions while retaining deterministic firmware-controlled behavior in compact industrial, consumer, communications, and control systems.

The key device characteristics visible in the product listing include an 8051 CPU core, 8-bit processing, a 50 MHz maximum operating frequency, and 64 KB, or 64K by 8 bits, of flash memory. The package is identified as 68-QFN with an 8 mm by 8 mm body and exposed-pad construction. These details make the device suitable for applications requiring substantial flash-based firmware storage and relatively fast control-loop execution.

PSoC 3 devices are designed for embedded applications that benefit from configurable peripherals and integrated mixed-signal control. The 8051 CPU architecture supports a familiar embedded programming model, while flash storage provides room for application code, configuration data, and boot or update logic. The exact peripheral inventory, supply-voltage limits, memory map, operating-temperature range, and electrical timing characteristics must be confirmed from the manufacturer ordering information and device documentation before a circuit is released.

Typical design roles include sensor acquisition and conditioning, industrial control panels, communication equipment, consumer interfaces, and compact embedded systems that combine digital control with analog signal paths. System designers should treat the exposed thermal pad as part of the electrical and thermal design. Adequate ground-plane connection, low-impedance supply routing, and stable decoupling are especially important when the device operates near its maximum clock frequency.

For a new PCB, use the manufacturer package drawing and pin-description table rather than relying on generic QFN conventions. Confirm the exposed-pad connection, programming interface, oscillator requirements, and all peripheral multiplexing before component placement. For an existing 68-QFN design, verify every pin function and the target variant's ordering codes before substituting another PSoC 3 device.

This page consolidates the verified product identity, capacity and frequency details, package information, sourcing paths, cross-reference findings, and engineering guidance needed to evaluate the CY8C3446LTI-072 for an embedded-control design.

Mga alternatibo na pwedeng ilagay na CY8C3446LTI-072 — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

CY8C3446LTI-073

✅ Drop-In
Infineon
📦 68-QFN (8x8)
PSoC 3 programmable system-on-chip microcontroller (8-bit architecture) · 8051 single-core processor (8-bit architecture) · 50 MHz · 64 kByte (64K x 8 bits) · 8 kByte · 2 kByte · 8 kByte · 1.71 V to 5.5 V

Magkontak para sa presyo

Tingnan ang Datasheet →

CY8C3446LTI-072 Mga Pinakamataas na Rating at Electrical Characteristics

Product Type 8-bit PSoC 3 microcontroller
Product Family PSoC 3 CY8C34xx
CPU Architecture 8051
CPU Word Size 8 bit
Maksimum na Taktiko ng Oras 50 MHz
Flash Memory Size 64 KB
Flash Organization 64K x 8 bits
SRAM Size 8 KB
Package Type 68-QFN
Package Dimensions 8 mm x 8 mm
Package Construction Exposed pad
Uri ng Pagpapasok Surface mount

Gabay sa Pin Configuration ng CY8C3446LTI-072 exposed pad

Pin configuration para sa CY8C3446LTI-072 (exposed pad package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.

Pinout diagram ng exposed pad package para sa CY8C3446LTI-072

Wala ng detalyadong pinout data na magagamit para sa CY8C3446LTI-072.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

CY8C3446LTI-072 ay nararapat para sa 6 aplikasyons: Industrial Sensor Acquisition, Embedded Control Panel, Communication Equipment, Consumer Interface Controller, Battery-Powered Monitoring Device, Motor and Actuator Control.

🏭

Industrial Sensor Acquisition

The CY8C3446LTI-072 fits compact sensor-acquisition and signal-conditioning systems that need local control close to the sensor. Its 8051 CPU runs at up to 50 MHz, while 64 KB of flash provides room for acquisition routines, calibration logic, filtering, and communication handling. The PSoC 3 programmable analog and digital resources allow a designer to reduce discrete processing circuitry when the required functions can be mapped to the device. Use the exact pin table to route sensor inputs, configure the exposed-pad connection, and preserve analog signal quality. Supply-voltage and operating-temperature limits must be confirmed before deployment in an industrial enclosure.

🔧

Embedded Control Panel

A compact control panel can use the CY8C3446LTI-072 to supervise switches, indicators, actuators, and local user commands. The 50 MHz 8051 CPU supports responsive event handling and protocol processing, and the 64 KB flash capacity accommodates interface firmware and configuration data. Programmable digital resources are useful for debouncing, timing, signal routing, and state-machine implementation, reducing the need for external logic. The 8 mm by 8 mm 68-QFN package helps limit board area, but its exposed pad requires deliberate thermal and ground-plane design. Validate all peripheral multiplexing, programming access, and connector protection against the device documentation before layout release.

🌐

Communication Equipment

The CY8C3446LTI-072 is suitable for communication modules that require an 8051-class controller alongside configurable digital and analog functions. At up to 50 MHz, the CPU can manage framing, state management, command processing, and supervisory tasks while external circuitry handles the physical-layer interface. Its 64 KB flash provides space for protocol firmware and parameter tables, and PSoC integration can simplify peripheral routing compared with a fixed-function MCU design. Designers should evaluate interrupt latency, peripheral availability, supply sequencing, and signal-conditioning requirements against the manufacturer documentation. Exact communication performance depends on the selected external interface and system implementation rather than the CPU frequency alone.

📱

Consumer Interface Controller

The CY8C3446LTI-072 can implement compact consumer interfaces that combine button or touch input, LED indication, local sensing, and embedded product logic. The 8-bit 8051 core and 64 KB flash are appropriate for straightforward control tasks, while programmable PSoC 3 blocks allow input conditioning and timing functions to be consolidated. The small 68-QFN footprint supports dense consumer boards, although exposed-pad soldering and copper design remain essential for assembly yield and thermal performance. Firmware should include debouncing, fault handling, and safe-state behavior for disconnected or shorted external devices. Verify available I/O and analog functions for the exact suffix before finalizing the schematic.

🔋

Battery-Powered Monitoring Device

A battery-powered monitoring product can use the CY8C3446LTI-072 for periodic measurement, threshold evaluation, event logging, and low-power state management. The 50 MHz CPU provides ample headroom for short processing bursts, while 64 KB flash stores firmware and calibration parameters without requiring external program memory. PSoC 3 resources may also replace separate logic for sampling sequencing and signal conditioning. Low-power suitability depends on the exact sleep modes, active current, wake-up sources, and analog performance specified for the selected device, so these characteristics must be reviewed before estimating battery life. Ensure the regulator design supplies all rails within the device's specified limits and that the exposed pad does not create unintended thermal paths.

⚡

Motor and Actuator Control

The CY8C3446LTI-072 can serve as the supervisory controller in a motor or actuator system where it sequences commands, monitors feedback, handles faults, and coordinates safety-related shutdown logic. Its programmable digital resources can implement timing and state management, while the 50 MHz 8051 CPU supports responsive supervisory loops without occupying a larger processor. The 64 KB flash capacity allows firmware for control tables, diagnostics, and communication handling. The MCU is not a substitute for a dedicated gate driver or power stage, and designers must verify whether the device's timers, comparators, and analog inputs satisfy the required control loop. Use the pin table to plan pulse timing and protection inputs.

Buod ng mga Inirekomendang Produkto

CY8C3446LTI-072 Infineon Ginagamit sa: Industrial Sensor Acquisition, Embedded Control Panel, Communication Equipment, Consumer Interface Controller, Battery-Powered Monitoring Device, Motor and Actuator Control CY8C3446LTI-073 Closely related PSoC 3 candidate Ginagamit sa: Industrial Sensor Acquisition, Embedded Control Panel, Communication Equipment, Consumer Interface Controller, Battery-Powered Monitoring Device, Motor and Actuator Control
What is the CY8C3446LTI-072?
The CY8C3446LTI-072 is an Infineon PSoC 3 CY8C34xx microcontroller built around an 8051 CPU. It operates at up to 50 MHz, provides 64 KB of flash and 8 KB of SRAM, and is packaged in a 68-QFN measuring 8 mm by 8 mm. The verified product listing identifies the device as an 8-bit embedded controller with an exposed-pad package.
What are the key specifications of CY8C3446LTI-072 that engineers should know?
The CY8C3446LTI-072 combines an 8-bit 8051 CPU, 50 MHz maximum operating frequency, 64 KB flash, and 8 KB SRAM in an 68-QFN package. Its 8 mm by 8 mm exposed-pad construction supports compact surface-mount layouts. The manufacturer ordering information identifies it as part of the PSoC 3 CY8C34xx family, combining embedded processing with programmable mixed-signal resources.
How much flash memory does the CY8C3446LTI-072 have?
The CY8C3446LTI-072 contains 64 KB of flash memory organized as 64K by 8 bits. This capacity is suitable for embedded firmware, configuration tables, control logic, and application-specific routines. The verified listing also identifies 8 KB of SRAM for the related CY8C3446LTI-073 ordering configuration; confirm the complete memory map for the exact production variant in the manufacturer documentation.
What package does the CY8C3446LTI-072 use?
The CY8C3446LTI-072 uses a 68-QFN surface-mount package with an 8 mm by 8 mm body and exposed pad. The exposed pad affects land-pattern, soldering, thermal, and ground-connection decisions. Use the official package drawing and land-pattern dimensions before fabrication because a generic 68-pin QFN footprint may not preserve the required thermal-pad geometry.
Where can I download the CY8C3446LTI-072 datasheet PDF?
The CY8C3446LTI-072 datasheet is accessible through the Cypress datasheet listing at datasheets.com and the Infineon PSoC 3 CY8C34xx documentation path. Start with the manufacturer device documentation to confirm the pin table, memory map, electrical characteristics, package drawing, and ordering information. The datasheet listing also links to technical specifications and package information for this exact MPN.
Where can I find the CY8C3446LTI-072 pinout?
The CY8C3446LTI-072 pinout is published in the device pin-description table and package drawing for the PSoC 3 CY8C34xx family. Start with the manufacturer documentation rather than inferring pins from the 68-QFN outline. Confirm programming signals, supply pins, ground connections, analog functions, digital peripheral mappings, and exposed-pad requirements for the exact suffix.
Can CY8C3446LTI-073 replace the CY8C3446LTI-072?
The CY8C3446LTI-073 is the closest documented same-family candidate for the CY8C3446LTI-072, and both are identified with an 8051 CPU, 64 KB flash, 8 KB SRAM, and a 50 MHz maximum frequency. However, the suffix distinction can encode ordering or qualification information, so engineers must verify the exact package, temperature grade, and pin configuration before treating it as a drop-in replacement.
What can replace the CY8C3446LTI-072?
No fully verified drop-in replacement is established beyond the closely related CY8C3446LTI-073 candidate. That part shares the documented 8051 CPU, 64 KB flash, 8 KB SRAM, and 50 MHz maximum frequency, but final interchangeability depends on package, pinout, temperature grade, qualification, and ordering-code checks. A PCB redesign should not be assumed without those confirmations.
Is CY8C3446LTI-072 suitable for industrial control applications?
The CY8C3446LTI-072 can fit compact embedded-control applications because it provides a 50 MHz 8-bit CPU, 64 KB flash, 8 KB SRAM, and programmable PSoC 3 mixed-signal resources. Suitability for a specific industrial product still depends on operating-temperature limits, supply-voltage range, safety certification, EMC performance, and long-term availability, which must be checked against the exact device documentation.
When should I choose the CY8C3446LTI-072 over a larger MCU?
Choose the CY8C3446LTI-072 when an application benefits from PSoC 3 mixed-signal integration, an 8051-compatible embedded core, and a compact 8 mm by 8 mm package but does not require a larger external memory interface or a more complex processor core. Its 64 KB flash and 8 KB SRAM should be checked against firmware size, working-memory demand, update requirements, and production diagnostics.
Is the CY8C3446LTI-072 the same as the CY8C3446LTI-073?
The CY8C3446LTI-072 and CY8C3446LTI-073 share the same principal device description: an 8051 PSoC 3 CY8C34xx controller with 64 KB flash, 8 KB SRAM, and a 50 MHz maximum frequency. They are not safe to treat as identical without checking the ordering codes. The package, temperature range, qualification status, and exact suffix meaning determine whether the substitution is acceptable.
CY8C3446LTI-072 vs CY8C3446LTI-073: which is better for a new design?
The CY8C3446LTI-073 is a close functional match because it has the same documented 8051 CPU, 64 KB flash, 8 KB SRAM, and 50 MHz maximum clock frequency. For a new design, select the suffix whose package, temperature grade, qualification status, and lifecycle requirements match the product specification. For an existing CY8C3446LTI-072 PCB, confirm pin compatibility and exposed-pad layout before substitution.
What is the best Infineon equivalent for CY8C3446LTI-072?
The CY8C3446LTI-073 is the closest documented Infineon equivalent found for the CY8C3446LTI-072 because both share an 8051 CPU, 64 KB flash, 8 KB SRAM, and 50 MHz maximum operating frequency. It should be treated as a conditional replacement until the package, temperature grade, qualification status, and ordering-code meanings are verified for the intended assembly.
Where can I buy CY8C3446LTI-072 online?
Use the Request a Quote form on this page to request CY8C3446LTI-072 availability, lead time, and ordering support. The verified product listing confirms the exact MPN, 50 MHz maximum frequency, 64 KB flash, and 68-QFN package. Purchase decisions should also confirm authorized sourcing, lot traceability, moisture-sensitivity handling, and manufacturer lifecycle status for the intended production quantity.
What is the price of CY8C3446LTI-072?
Current price and quantity availability for the CY8C3446LTI-072 should be requested through the Request a Quote form on this page. The verified product information does not print a qualifying quantity-break price table for this exact MPN, so this page does not publish a potentially stale unit price. Include target quantity, packaging preference, and required delivery timing in the request.
What is the lead time for CY8C3446LTI-072?
Request the current CY8C3446LTI-072 lead time through the Request a Quote form on this page. Lead time can depend on order quantity, factory inventory, package and reel configuration, supply-chain conditions, and quality requirements. Include your annual usage forecast and required traceability so the quote can reflect the correct material planning basis.
Is CY8C3446LTI-072 in stock?
Stock status for CY8C3446LTI-072 should be confirmed through the Request a Quote form on this page for the required quantity and packaging configuration. The device is identified as an 8051 PSoC 3 CY8C34xx microcontroller with 64 KB flash in a 68-QFN package. A stock commitment should also specify delivery location, ship date, reel quantity, and lot-traceability requirements.
How should the CY8C3446LTI-072 exposed pad be connected?
The CY8C3446LTI-072 exposed pad must be implemented according to the manufacturer package drawing and land-pattern guidance. Treat it as a critical thermal and electrical feature rather than an optional copper area. Confirm whether it is tied to ground, its recommended via pattern, solder-process requirements, and the maximum copper coverage allowed by the assembly process.

Impormasyon ng Talumpati sa Engineering for CY8C3446LTI-072 — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose the CY8C3446LTI-072 for a new PSoC 3 design that needs an 8051 CPU, up to 50 MHz execution, 64 KB flash, 8 KB SRAM, and programmable mixed-signal resources in an 8 mm by 8 mm 68-QFN package. The CY8C3446LTI-073 is the closest documented alternative because its principal CPU, memory, frequency, and package characteristics match. Consider it only after verifying the suffix-specific temperature grade, qualification, pin configuration, and ordering status. For production continuity, favor the target when its lifecycle and sourcing position satisfy the product plan. If either device lacks a required timer, analog function, communication peripheral, temperature rating, or supply range, choose a different PSoC 3 member rather than forcing a software workaround or package substitution.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto CY8C3446LTI-073
Brand Infineon Infineon
Package 68-QFN (8x8) 68-QFN (8x8)
Product Family PSoC 3 CY8C34xx PSoC 3 CY8C34xx
CPU Architecture 8051 8051
CPU Word Size 8 bit 8 bit
Maximum Clock Frequency 50 MHz 50 MHz
Flash Memory 64 KB 64 kByte
SRAM 8 KB 8 kByte
Ordering Suffix -072 -073
Programmable Resources PSoC 3 programmable digital and analog resources PSoC 3 programmable digital and analog resources

Pangunahing mga Pagkakaiba

  • 50 MHz 8051 processing in a compact PSoC 3 device (kumpara saCY8C3446LTI-073)
  • 64 KB flash supports larger embedded firmware (kumpara saCY8C3446LTI-073)
  • 8 KB working memory for control tasks (kumpara saCY8C3446LTI-073)
  • Small 68-QFN footprint for space-constrained boards (kumpara saCY8C3446LTI-073)

Talaan ng Disenyo

Treat the 68-QFN exposed pad as an essential thermal and electrical feature. Use the manufacturer land pattern and thermal-via recommendation rather than estimating via placement from a generic QFN footprint. Keep the thermal path short by connecting the pad to an appropriate ground plane, avoid cutting the plane beneath the device where the package guidance prohibits it, and review the board's copper geometry at the intended maximum clock frequency and ambient temperature.

Place decoupling capacitors immediately beside their associated supply and ground pins, with the shortest possible current-loop area. Follow the manufacturer recommendations for capacitance, voltage rating, and dielectric type. Route programming and sensitive analog signals away from high-current switching nodes, and preserve the documented land pattern, pin numbering, mask orientation, and exposed-pad dimensions to avoid assembly or rework problems.

Do not assume that the -073 suffix is interchangeable with -072 solely because the CPU, memory, and clock specifications match. Verify the ordering-code meaning, temperature grade, package dimensions, qualification status, and exposed-pad connection. For a drop-in production change, also compare every power, ground, programming, reset, analog, and digital signal in the manufacturer pin tables and confirm that no peripheral multiplexing or lifecycle condition has changed.

Use the manufacturer pin-description table when assigning signals because many PSoC 3 peripherals are multiplexed among programmable blocks and fixed functions. Confirm programming access, clock sources, reset behavior, analog inputs, and communications pins before schematic capture. Maintain a consistent package orientation across schematic, PCB footprint, assembly drawing, and programming fixture to prevent pin-one errors during production.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

Compliance status was not stated in the verified product information. AEC-Q100 is treated as not applicable because the available listings do not identify this MPN as an automotive-qualified variant.

Data napatotohanan sa: 2026-11-15 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

CY8C3446LTI-072 datasheet CY8C3446LTI-072 datasheet pdf CY8C3446LTI-072 pinout CY8C3446LTI-072 specifications Infineon CY8C3446LTI-072 CY8C3446LTI-072 50MHz CY8C3446LTI-072 64KB flash CY8C3446LTI-072 68-QFN CY8C3446LTI-072 replacement CY8C3446LTI-072 equivalent CY8C3446LTI-072 vs CY8C3446LTI-073 CY8C3446LTI-072 application circuit CY8C3446LTI-072 price CY8C3446LTI-072 stock CY8C3446LTI-072 schematic

Mga kaugnay na Mga Komponente at mga Tuntunin

Infineon Cypress Semiconductor CY8C3446LTI-072 CY8C3446LTI-073 PSoC 3 CY8C34xx 8051 CPU 8-bit microcontroller system on chip embedded microcontroller embedded processor semiconductor programmable mixed-signal flash memory SRAM 50 MHz 64 KB flash 8 KB SRAM 68-QFN QFN package family exposed pad surface mount industrial sensor acquisition motor and actuator control
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ