CY8C3446LTI-072 - 50MHz 8-Bit PSoC 3 MCU | Infineon
MPN: CY8C3446LTI-072 ✓ AktifCY8C3446LTI-072 Genel Bakış
A programmable system on chip, or PSoC, integrates a CPU, programmable digital blocks, analog peripherals, and memory into one device. The PSoC 3 architecture places the CY8C34xx family in the broader hierarchy of embedded microcontroller, embedded processor, and semiconductor. This integration allows designers to configure digital logic and analog functions while retaining deterministic firmware-controlled behavior in compact industrial, consumer, communications, and control systems.
The key device characteristics visible in the product listing include an 8051 CPU core, 8-bit processing, a 50 MHz maximum operating frequency, and 64 KB, or 64K by 8 bits, of flash memory. The package is identified as 68-QFN with an 8 mm by 8 mm body and exposed-pad construction. These details make the device suitable for applications requiring substantial flash-based firmware storage and relatively fast control-loop execution.
PSoC 3 devices are designed for embedded applications that benefit from configurable peripherals and integrated mixed-signal control. The 8051 CPU architecture supports a familiar embedded programming model, while flash storage provides room for application code, configuration data, and boot or update logic. The exact peripheral inventory, supply-voltage limits, memory map, operating-temperature range, and electrical timing characteristics must be confirmed from the manufacturer ordering information and device documentation before a circuit is released.
Typical design roles include sensor acquisition and conditioning, industrial control panels, communication equipment, consumer interfaces, and compact embedded systems that combine digital control with analog signal paths. System designers should treat the exposed thermal pad as part of the electrical and thermal design. Adequate ground-plane connection, low-impedance supply routing, and stable decoupling are especially important when the device operates near its maximum clock frequency.
For a new PCB, use the manufacturer package drawing and pin-description table rather than relying on generic QFN conventions. Confirm the exposed-pad connection, programming interface, oscillator requirements, and all peripheral multiplexing before component placement. For an existing 68-QFN design, verify every pin function and the target variant's ordering codes before substituting another PSoC 3 device.
This page consolidates the verified product identity, capacity and frequency details, package information, sourcing paths, cross-reference findings, and engineering guidance needed to evaluate the CY8C3446LTI-072 for an embedded-control design.
Drop-in alternatifler için CY8C3446LTI-072 — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
CY8C3446LTI-073
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →CY8C3446LTI-072 Maksimum Değerlendirmeler & Elektriksel Özellikler
| Product Type | 8-bit PSoC 3 microcontroller |
| Product Family | PSoC 3 CY8C34xx |
| CPU Architecture | 8051 |
| CPU Word Size | 8 bit |
| Azami Saat Hızı | 50 MHz |
| Flash Memory Size | 64 KB |
| Flash Organization | 64K x 8 bits |
| SRAM Size | 8 KB |
| Package Type | 68-QFN |
| Package Dimensions | 8 mm x 8 mm |
| Package Construction | Exposed pad |
| Montaj Türü | Surface mount |
CY8C3446LTI-072 exposed pad Pin Yapısı Kılavuzu
CY8C3446LTI-072 (exposed pad paket) için pin yapısı. Bu dijital IC, GPIO, iletişim arayüzleri (UART, SPI, I2C) ve güç pinleri içerir. Alternatif pin işlevleri ve yapılandırma seçenekleri için üretici veri kitapçığını referans alın. Tünel sistem tasarımı ve PCB yerleşimi için temel bir bileşendir.
Ayrıntılı pin çıkış verisi mevcut değil: CY8C3446LTI-072.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
CY8C3446LTI-072 için uygundur 6 uygulamas: Industrial Sensor Acquisition, Embedded Control Panel, Communication Equipment, Consumer Interface Controller, Battery-Powered Monitoring Device, Motor and Actuator Control.
Industrial Sensor Acquisition
The CY8C3446LTI-072 fits compact sensor-acquisition and signal-conditioning systems that need local control close to the sensor. Its 8051 CPU runs at up to 50 MHz, while 64 KB of flash provides room for acquisition routines, calibration logic, filtering, and communication handling. The PSoC 3 programmable analog and digital resources allow a designer to reduce discrete processing circuitry when the required functions can be mapped to the device. Use the exact pin table to route sensor inputs, configure the exposed-pad connection, and preserve analog signal quality. Supply-voltage and operating-temperature limits must be confirmed before deployment in an industrial enclosure.
Önerilen
Embedded Control Panel
A compact control panel can use the CY8C3446LTI-072 to supervise switches, indicators, actuators, and local user commands. The 50 MHz 8051 CPU supports responsive event handling and protocol processing, and the 64 KB flash capacity accommodates interface firmware and configuration data. Programmable digital resources are useful for debouncing, timing, signal routing, and state-machine implementation, reducing the need for external logic. The 8 mm by 8 mm 68-QFN package helps limit board area, but its exposed pad requires deliberate thermal and ground-plane design. Validate all peripheral multiplexing, programming access, and connector protection against the device documentation before layout release.
Önerilen
Communication Equipment
The CY8C3446LTI-072 is suitable for communication modules that require an 8051-class controller alongside configurable digital and analog functions. At up to 50 MHz, the CPU can manage framing, state management, command processing, and supervisory tasks while external circuitry handles the physical-layer interface. Its 64 KB flash provides space for protocol firmware and parameter tables, and PSoC integration can simplify peripheral routing compared with a fixed-function MCU design. Designers should evaluate interrupt latency, peripheral availability, supply sequencing, and signal-conditioning requirements against the manufacturer documentation. Exact communication performance depends on the selected external interface and system implementation rather than the CPU frequency alone.
Önerilen
Consumer Interface Controller
The CY8C3446LTI-072 can implement compact consumer interfaces that combine button or touch input, LED indication, local sensing, and embedded product logic. The 8-bit 8051 core and 64 KB flash are appropriate for straightforward control tasks, while programmable PSoC 3 blocks allow input conditioning and timing functions to be consolidated. The small 68-QFN footprint supports dense consumer boards, although exposed-pad soldering and copper design remain essential for assembly yield and thermal performance. Firmware should include debouncing, fault handling, and safe-state behavior for disconnected or shorted external devices. Verify available I/O and analog functions for the exact suffix before finalizing the schematic.
Önerilen
Battery-Powered Monitoring Device
A battery-powered monitoring product can use the CY8C3446LTI-072 for periodic measurement, threshold evaluation, event logging, and low-power state management. The 50 MHz CPU provides ample headroom for short processing bursts, while 64 KB flash stores firmware and calibration parameters without requiring external program memory. PSoC 3 resources may also replace separate logic for sampling sequencing and signal conditioning. Low-power suitability depends on the exact sleep modes, active current, wake-up sources, and analog performance specified for the selected device, so these characteristics must be reviewed before estimating battery life. Ensure the regulator design supplies all rails within the device's specified limits and that the exposed pad does not create unintended thermal paths.
Önerilen
Motor and Actuator Control
The CY8C3446LTI-072 can serve as the supervisory controller in a motor or actuator system where it sequences commands, monitors feedback, handles faults, and coordinates safety-related shutdown logic. Its programmable digital resources can implement timing and state management, while the 50 MHz 8051 CPU supports responsive supervisory loops without occupying a larger processor. The 64 KB flash capacity allows firmware for control tables, diagnostics, and communication handling. The MCU is not a substitute for a dedicated gate driver or power stage, and designers must verify whether the device's timers, comparators, and analog inputs satisfy the required control loop. Use the pin table to plan pulse timing and protection inputs.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: CY8C3446LTI-072 — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | CY8C3446LTI-073 |
|---|---|---|
| Brand | Infineon | Infineon |
| Package | 68-QFN (8x8) | 68-QFN (8x8) |
| Product Family | PSoC 3 CY8C34xx | PSoC 3 CY8C34xx |
| CPU Architecture | 8051 | 8051 |
| CPU Word Size | 8 bit | 8 bit |
| Maximum Clock Frequency | 50 MHz | 50 MHz |
| Flash Memory | 64 KB | 64 kByte |
| SRAM | 8 KB | 8 kByte |
| Ordering Suffix | -072 | -073 |
| Programmable Resources | PSoC 3 programmable digital and analog resources | PSoC 3 programmable digital and analog resources |
Ana Farklılayıcılar
- 50 MHz 8051 processing in a compact PSoC 3 device (karşılaştırma:CY8C3446LTI-073)
- 64 KB flash supports larger embedded firmware (karşılaştırma:CY8C3446LTI-073)
- 8 KB working memory for control tasks (karşılaştırma:CY8C3446LTI-073)
- Small 68-QFN footprint for space-constrained boards (karşılaştırma:CY8C3446LTI-073)
Tasarım Notları
Treat the 68-QFN exposed pad as an essential thermal and electrical feature. Use the manufacturer land pattern and thermal-via recommendation rather than estimating via placement from a generic QFN footprint. Keep the thermal path short by connecting the pad to an appropriate ground plane, avoid cutting the plane beneath the device where the package guidance prohibits it, and review the board's copper geometry at the intended maximum clock frequency and ambient temperature.
Place decoupling capacitors immediately beside their associated supply and ground pins, with the shortest possible current-loop area. Follow the manufacturer recommendations for capacitance, voltage rating, and dielectric type. Route programming and sensitive analog signals away from high-current switching nodes, and preserve the documented land pattern, pin numbering, mask orientation, and exposed-pad dimensions to avoid assembly or rework problems.
Do not assume that the -073 suffix is interchangeable with -072 solely because the CPU, memory, and clock specifications match. Verify the ordering-code meaning, temperature grade, package dimensions, qualification status, and exposed-pad connection. For a drop-in production change, also compare every power, ground, programming, reset, analog, and digital signal in the manufacturer pin tables and confirm that no peripheral multiplexing or lifecycle condition has changed.
Use the manufacturer pin-description table when assigning signals because many PSoC 3 peripherals are multiplexed among programmable blocks and fixed functions. Confirm programming access, clock sources, reset behavior, analog inputs, and communications pins before schematic capture. Maintain a consistent package orientation across schematic, PCB footprint, assembly drawing, and programming fixture to prevent pin-one errors during production.
Uyumluluk Bilgisi
Compliance status was not stated in the verified product information. AEC-Q100 is treated as not applicable because the available listings do not identify this MPN as an automotive-qualified variant.