DS90CF562MTDX - 280Mbps 18-Bit LVDS FPD Link | TI
MPN: DS90CF562MTDX ✓ NakahandaDS90CF562MTDX Ulas
An LVDS FPD link is a high-speed, low-voltage differential interface used to carry pixel and control information between a display controller and a flat-panel display panel. The DS90CF562MTDX belongs to the interface IC hierarchy, where parallel CMOS data is serialized and transmitted differentially to reduce electromagnetic interference, support balanced signaling, and preserve data integrity across cable or PCB interconnect.
The device supports an 18-bit color data path and three LVDS outputs. Its 280 Mbps rate provides the headroom required for legacy color flat-panel display interfaces, while the 0.45 V supply reduces the voltage required by the digital interface circuitry. The 48-pin TSSOP package provides a conventional surface-mount footprint suitable for established display-controller and panel-interface designs.
DS90CF561-family devices use complementary CMOS/TTL-to-LVDS conversion to distribute serialized pixel information across differential channels. The transmitter architecture allows a display subsystem to use low-voltage differential signaling instead of carrying high-speed single-ended pixel signals directly across the board or cable, improving noise immunity and reducing radiated emissions in the completed display link.
Typical applications include small color flat-panel display controllers, industrial panel interfaces, medical display modules, automotive information-display systems, and legacy computer or instrumentation panels. The device is particularly relevant when an existing design requires an 18-bit FPD link operating at 280 Mbps rather than a modern high-speed eDP or DisplayPort interface.
When designing a replacement board, preserve the manufacturer-recommended input and output network, differential pair geometry, ground return, and decoupling arrangement. Confirm that the panel timing, mapping of parallel input bits to LVDS outputs, connector arrangement, and cable length match the original display architecture because a compatible IC package does not by itself guarantee panel-level interoperability.
This product record consolidates the verified electrical, package, ordering, and cross-reference details with practical guidance for LCD controller, industrial panel, medical display, and legacy FPD interface designs.
Mga alternatibo na pwedeng ilagay na DS90CF562MTDX — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
DS90CF562MTD/NOPB
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
DS90CF562MTDX/NOPB
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
DS90CF562MTDX Mga Spesipikasyon
| Product Type | LVDS flat-panel display transmitter |
| Color Data Width | 18 bit |
| LVDS Output Count | 3 |
| Maximum Data Rate | 280 Mbps |
| Volte ng Pagbibigay | 0.45 V |
| Input Logic | CMOS/TTL |
| Output Signaling | LVDS |
| Packhaging | 48-pin TSSOP |
| Uri ng Pagpapasok | Surface mount |
| Shipping Format | Tape and reel |
| Tindminan RoHS | Compliant |
| Lead-Free Status | Lead free |
Gabay sa Pin Configuration ng DS90CF562MTDX 48-pin tssop
Pin configuration para sa DS90CF562MTDX (48-pin tssop package). Ang pagnunumero ng pin, mga function, at connection diagram ay tinukoy sa datasheet ng manufacturer. Sumangguni dito para sa eksaktong footprint at mga alituntunin sa soldering.
Wala ng detalyadong pinout data na magagamit para sa DS90CF562MTDX.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
DS90CF562MTDX ay nararapat para sa 6 aplikasyons: Industrial Color Panel Interface, Medical Display Controller, Automotive Information Display, Legacy LCD Monitor Controller, Instrumentation Panel Display, Compact Embedded Display.
Industrial Color Panel Interface
The DS90CF562MTDX fits legacy industrial color panels that expect an 18-bit parallel pixel bus followed by three LVDS channels. Its 280 Mbps data rate provides sufficient link bandwidth, while the 0.45 V operating supply aligns with low-voltage display-interface requirements. Place the transmitter between the timing controller and panel connector, preserve the manufacturer-recommended decoupling, and route each differential pair as a balanced 100-ohm-terminated network. Validate the complete link with the specified panel timing because controller timing, channel order, and connector polarity must agree with the receiver. This device is also appropriate when an existing machine-control display is being refreshed with minimal controller changes.
Inirekomenda
Medical Display Controller
The DS90CF562MTDX can serve as the panel-side transmitter in a legacy medical display whose receiver expects the DS90CF562 18-bit color FPD interface. Its three LVDS outputs distribute serialized display data at up to 280 Mbps, reducing the number of high-speed single-ended signals that must cross a noisy enclosure boundary. The 0.45 V supply is suitable for systems designed around the specified low-voltage interface. Medical use still requires system-level review of electrical safety, EMC, display readability, and applicable quality procedures. Engineers should confirm that the panel identifies compatible 18-bit mode, voltage, and timing rather than assuming that every LVDS display can accept the DS90CF562 data mapping.
Inirekomenda
Automotive Information Display
The DS90CF562MTDX is a practical fit for an older automotive information-display link that uses an 18-bit LVDS flat-panel interface rather than a modern vehicle-network display architecture. At a maximum 280 Mbps, it can serialize the panel data into three differential streams, helping maintain signal integrity across the distance between a graphics controller and display. A 0.45 V operating supply supports integration with the receiver and controller voltage plan. For automotive deployment, engineers must separately verify temperature range, electromagnetic compatibility, transient robustness, qualification status, and supply-chain controls; interface compatibility alone does not establish automotive suitability. Panel timing and failure-state behavior must also be verified before production use.
Inirekomenda
Legacy LCD Monitor Controller
The DS90CF562MTDX is suitable for repairing or reproducing a legacy color LCD monitor architecture that transmits 18-bit pixel data through three LVDS channels. Its 280 Mbps maximum rate matches the documented class of flat-panel display link, while the 48-pin TSSOP package supports board-level replication of established designs. In a replacement board, preserve the original input-to-output bit mapping, differential channel polarity, termination network, and decoupling arrangement. The controller's pixel-clock and synchronization timing must also remain unchanged or be deliberately revalidated. This use case is especially useful when a display assembly requires a dedicated LVDS transmitter rather than a modern panel interface capable of negotiating eDP or DisplayPort configurations.
Inirekomenda
Instrumentation Panel Display
The DS90CF562MTDX can connect a legacy instrumentation or test-equipment display controller when the panel expects an 18-bit LVDS FPD stream. The transmitter consolidates parallel CMOS/TTL pixel information into three differential outputs operating at up to 280 Mbps, which helps reduce radiated emissions and susceptibility compared with extending high-speed single-ended traces. The 0.45 V supply should be included in the controller's power-sequencing and noise-budget analysis. For laboratory or production equipment, use short, impedance-controlled LVDS routing, provide a continuous reference plane, and verify the receiver's termination arrangement. System integration testing should cover synchronization, color-bit mapping, cable length, temperature range, and the specified startup and shutdown behavior of the selected display receiver.
Inirekomenda
Compact Embedded Display
The DS90CF562MTDX is applicable to compact embedded systems that retain a dedicated 18-bit FPD receiver and require a 280 Mbps LVDS transmitter. The three-output architecture provides separate differential data lanes for the receiver, while the 48-pin TSSOP permits a conventional surface-mount layout. In a compact enclosure, differential routing reduces the electromagnetic-interference footprint relative to long single-ended pixel buses, but careful return-path design remains essential. Follow the manufacturer's recommended supply bypassing and LVDS network topology, avoid long stubs, and keep connector transitions closely matched to the controlled-impedance traces. The system integrator must confirm that the embedded panel's timing, input mapping, and cable characteristics are compatible with the DS90CF562 interface before using it as a platform-wide display standard.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for DS90CF562MTDX — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | DS90CF562MTD/NOPB | DS90CF562MTDX/NOPB |
|---|---|---|---|
| Package | 48-pin TSSOP | 48-pin TSSOP | 48-pin TSSOP |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| Product Function | LVDS 18-bit color FPD transmitter | LVDS flat-panel display interface | LVDS flat-panel display interface |
| Color Data Width | 18 bit | 18 bit | 18 bit |
| LVDS Output Count | 3 | 3 | 3 |
| Maximum Data Rate | 280 Mbps | 280 Mbps | 280 Mbps |
| Supply Voltage | 0.45 V | 0.45 V | 0.45 V |
| Input Logic | CMOS/TTL | CMOS/TTL | CMOS/TTL |
Pangunahing mga Pagkakaiba
- Direct documented pin-compatible replacement (kumpara saDS90CF562MTD/NOPB)
- Approved-ordering alternative with identical interface (kumpara saDS90CF562MTDX/NOPB)
- Dedicated 18-bit FPD transmitter configuration (kumpara saDS90CF562MTD/NOPB)
Talaan ng Disenyo
Route each LVDS output as a tightly coupled differential pair with a continuous ground reference beneath the pair. Match differential impedance and pair length according to the interface guidance in the manufacturer datasheet, avoid stubs, and keep connector transitions symmetrical. The three differential streams carry serialized pixel information at up to 280 Mbps, so discontinuities in spacing, reference-plane transitions, or return current can create reflections that corrupt the received display data.
Use the manufacturer-recommended supply bypassing at the 0.45 V power pins and keep the decoupling network close to the device. Place bulk and local capacitors according to the datasheet application circuit rather than adding arbitrary values that could disturb supply startup or interface timing. Confirm the controller, transmitter, and panel receiver use compatible voltage domains. Verify the 0.45 V operating point under the expected pixel-clock and data activity because the available source does not define the complete operating-voltage tolerance.
Do not select a replacement solely from the 48-pin TSSOP package. The alternate orderable code must retain the same 18-bit mapping, three-output LVDS architecture, synchronization behavior, and electrical ratings. Also check differential polarity, receiver termination, panel timing, and connector channel order. A physically identical package can still fail in a display product if data mapping or LVDS receiver requirements differ.
Keep the LVDS pairs short where possible and provide an uninterrupted ground plane to contain differential radiation. Avoid routing the links adjacent to switching power stages, clocks, or high-slew-rate processor signals. If the display connection crosses a noisy enclosure boundary, follow the manufacturer interface recommendations for connectors, return paths, and test-point access. Validate emissions and immunity at the completed product level because IC placement alone cannot guarantee system EMC performance.
Impormasyon ng Pagsunod sa Kautusan
The product listing identifies the DS90CF562MTDX as lead free and RoHS compliant. REACH, halogen-free, conflict-minerals, and AEC-Q100 status are not established by the cited product information.