DSPIC33CK256MP306-I/MR - 100MHz DSC 256KB Flash | Microchip
MPN: DSPIC33CK256MP306-I/MR ✓ NakahandaDSPIC33CK256MP306-I/MR Ulas
A digital signal controller combines the computational throughput of a DSP with the peripheral integration and control logic of a microcontroller. Within the power-management hierarchy, the dsPIC33CK family sits between general-purpose MCUs and dedicated motor-control ASICs, offering a DSP engine (barrel shifter, single-cycle MAC, DSP instruction set) on top of a 16-bit MCU core, making it a power-management and control IC for precision motion and digital power systems.
Key features include 100 MIPS core performance, 256 KB dual-panel flash supporting live firmware updates, 64 KB of ECC-protected RAM, up to three integrated operational amplifiers, 12-bit ADCs capable of up to 3.5 Msps, and high-resolution PWM peripherals for digital power conversion.
Technically, the dsPIC33CK core executes one instruction per cycle at 100 MHz, with DSP multiply-accumulate instructions and hardware divide support. Dual-panel flash allows one panel to execute code while the other is reprogrammed, supporting field upgrades without an external bootloader flash. The internal oscillator removes the need for an external crystal in many designs, and multiple PGECx/PGEDx pairs support ICSP programming.
Typical applications include precision motor control (FOC for BLDC/PMSM), digital power supplies (totem-pole PFC, LLC), industrial automation, and automotive-adjacent control systems. High ADC sample rates paired with fast PWM enable closed-loop control bandwidths well above analog-compensated alternatives.
Design consideration: use any PGECx/PGEDx pair consistently for ICSP - ICSPCLK and ICSPDAT must come from the same pair. Decouple all VDD/VDDCORE pins with 0.1 uF ceramics close to the pins.
This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet.
Mga alternatibo na pwedeng ilagay na DSPIC33CK256MP306-I/MR — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok DSPIC33CK256MP306-I/MR (parehas na form factor at footprint) — pagkakaiba sa Package, Core, Operating Temperature, RoHS Status, CAN.
DSPIC33CK256MP306-H/MR
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
DSPIC33CK512MP306-I/MR
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
DSPIC33CK128MP306-I/MR
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
DSPIC33CK128MP506-E/MR
✅ Drop-In ⚠️ Mga Talaan Hindi NaiwerikmoMagkontak para sa presyo
Tingnan ang Datasheet →DSPIC33CK256MP206-I/MR
✅ Drop-In ⚠️ Mga Talaan Hindi NaiwerikmoMagkontak para sa presyo
Tingnan ang Datasheet →DSPIC33CK256MP306-I/MR Mga Pinakamataas na Rating at Electrical Characteristics
| Core | dsPIC33CK 16-bit DSC |
| Core Speed | 100 MHz (100 MIPS) |
| Program Memory (Flash) | 256 KB (dual panel) |
| RAM Size | 64 KB |
| ADC Resolution | 12-bit |
| Packhaging | 64-QFN (MR, 9x9 mm), exposed pad (64-VFQFN) |
| Uri ng Pagpapasok | Surface Mount |
| Oscillator Type | Internal |
| Operating Temperature Min | -40 C |
| Operating Temperature Max | 85 C |
| Integrated Peripherals | OpAmps, 12-bit ADCs, high-resolution PWM |
| Terminal Pitch | 0.5 mm |
| Programming Interface | ICSP (multiple PGECx/PGEDx pairs) |
| DMA Channels | 8 |
| Tindminan RoHS | RoHS compliant |
Gabay sa Pin Configuration ng DSPIC33CK256MP306-I/MR 64-qfn (mr, 9x9 mm), exposed pad (64-vfqfn)
Pin configuration para sa DSPIC33CK256MP306-I/MR (64-qfn (mr, 9x9 mm), exposed pad (64-vfqfn) package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa DSPIC33CK256MP306-I/MR.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
DSPIC33CK256MP306-I/MR ay nararapat para sa 6 aplikasyons: Precision BLDC/PMSM Motor Control, Digital Power Supplies (PFC / LLC), Industrial Automation and PLC I/O, Battery Management and Charging Systems, Digital Audio and Signal Processing, Automotive-Area Control (via -H variant).
Precision BLDC/PMSM Motor Control
The DSPIC33CK256MP306-I/MR is purpose-built for field-oriented control (FOC) of BLDC and PMSM motors: the 100 MHz (100 MIPS) core executes fast current loops, the 12-bit ADCs sample phase currents at high rates, and integrated op-amps condition shunt-resistor signals without external amplifiers. The high-resolution PWM peripherals generate complementary outputs with dead-time insertion for three-phase inverters. Eight DMA channels offload ADC results to RAM without CPU intervention, keeping interrupt latency deterministic. Placed at the heart of a servo drive or industrial robot joint, the DSC closes current loops in the tens-of-microseconds range; the main trade-off versus an analog controller is firmware complexity, offset by Microchip's motor-control libraries and the dual-panel flash enabling in-field drive firmware updates.
Inirekomenda
Digital Power Supplies (PFC / LLC)
In totem-pole PFC and LLC resonant converter designs, the DSPIC33CK256MP306-I/MR replaces analog control with a fully digital loop. Its high-resolution PWM provides sub-nanosecond duty-cycle and phase resolution needed for ZVS tuning, while 12-bit ADCs sample output voltage, input current, and temperature for multi-loop control at up to 100 MHz instruction throughput. The integrated op-amps can buffer current-shunt signals for average-current-mode control. The 256 KB dual-panel flash lets manufacturers ship firmware updates that retune compensation laws without hardware changes. One design consideration is that digital control adds computation delay relative to analog loops; mitigations include ADC-PWM hardware triggering that eliminates software jitter, supported by the device's 8-channel DMA for zero-overhead result transfer.
Inirekomenda
Industrial Automation and PLC I/O
For industrial automation nodes, the DSPIC33CK256MP306-I/MR provides deterministic DSP performance for machine sensing, actuation, and condition monitoring. The -40 C to +85 C industrial temperature rating covers uncontrolled factory-floor environments, and the internal oscillator removes the cost and failure points of external crystals in vibration-prone installations. Its 64 KB of RAM and 8 DMA channels support circular buffers for FFT-based vibration analysis, while the 256 KB dual-panel flash hosts both application code and a field-updatable loader. Multiple PGECx/PGEDx pairs allow programming headers to be routed to the most convenient connector location. Compared with a general-purpose MCU, the DSP engine accelerates filter and transform computations by an order of magnitude, enabling predictive maintenance analytics at the edge.
Inirekomenda
Battery Management and Charging Systems
The DSPIC33CK256MP306-I/MR suits battery chargers and battery-management systems that need both accurate measurement and active control. The 12-bit ADCs monitor cell voltages and currents, the integrated op-amps buffer sense signals, and the high-resolution PWM drives synchronous buck/boost charging stages with precise current ripple characteristics. Running the charging state machine in firmware allows adaptive CC/CV profiles per battery chemistry without analog redesign. The 256 KB flash accommodates complex state-of-charge algorithms and logging tables in 64 KB RAM. The industrial -40 C to +85 C range suits outdoor energy-storage enclosures. A key consideration is firmware functional-safety rigor; Microchip offers Functional Safety (FuSa) package support for the dsPIC33C family, as noted in DigiKey's listing of the family variants.
Inirekomenda
Digital Audio and Signal Processing
The single-cycle MAC and DSP instruction set of the DSPIC33CK256MP306-I/MR make it effective for embedded audio processing: active crossover filters, limiters, and effects chains. The 100 MHz core sustains multiple biquad filter sections at 48 kHz sample rates with headroom for control tasks, and the 64 KB RAM holds delay lines and coefficient tables. Twelve-bit ADCs digitize line-level inputs with adequate dynamic range for control-oriented audio (volume, tone), while the integrated op-amps can serve as input biasing stages. The 256 KB dual-panel flash enables firmware-updatable audio products in the field. For high-fidelity output, pair the DSC with an external audio codec over SPI/I2C; the DSP engine then focuses purely on the processing chain rather than conversion.
Inirekomenda
Automotive-Area Control (via -H variant)
For applications migrating toward automotive qualification, the same 64-QFN design accepts the DSPIC33CK256MP306-H/MR drop-in variant, which per Microchip USA operates from -40 C to +150 C and meets AEC-Q100 standards. This lets a single PCB layout serve industrial prototypes and automotive production: validate control firmware on the -I/MR part, then qualify with the -H part without layout changes. Typical near-automotive uses include auxiliary pumps, cooling fans, actuators, and zone controllers where CAN networking and precise motor control converge. The 0.5 mm pitch PQCC-64 package (JESD-30: S-PQCC-N64) supports standard SMT assembly. Designers should verify AEC-Q100 qualification scope and PPAP availability with Microchip for their specific production program.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for DSPIC33CK256MP306-I/MR — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | DSPIC33CK256MP306-H/MR | DSPIC33CK512MP306-I/MR | DSPIC33CK128MP306-I/MR | DSPIC33CK128MP506-E/MR | DSPIC33CK256MP206-I/MR |
|---|---|---|---|---|---|---|
| Package | 64-QFN (MR, 9x9 mm) | 64-QFN (MR) - same | 64-QFN (MR) - same | 64-QFN (MR) - same | 64-QFN (MR) - same | 64-QFN (MR) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Core Speed | 100 MHz | 100 MHz | 100 MHz | 100 MHz | 100 MHz | 100 MHz |
| Flash Memory | 256 KB (dual panel) | 256 KB | 512 KB | 128 KB | 128 KB | 256 KB |
| Operating Temperature | -40 C to +85 C | -40 C to +150 C | -40 C to +85 C | -40 C to +85 C | -40 C to +125 C (E) | -40 C to +85 C |
| Qualification Grade | Industrial | AEC-Q100 automotive | Industrial | Industrial | Extended (E) grade | Industrial |
Pangunahing mga Pagkakaiba
- 256 KB dual-panel flash enables live field updates (kumpara saDSPIC33CK128MP306-I/MR)
- Automotive drop-in path available (kumpara saDSPIC33CK256MP306-H/MR)
- Cost-optimized when CAN-FD is not needed (kumpara saDSPIC33CK128MP506-E/MR)
Talaan ng Disenyo
The 64-QFN exposed pad is the primary ground and thermal path. Connect it to a solid ground plane through an array of 5x5 or 7x7 thermal vias filled with solder. Decouple every VDD and VDDCORE pin with 0.1 uF ceramic capacitors placed within 1-2 mm of the pin; add 4.7-10 uF bulk capacitance per supply domain. Poor VDDCORE decoupling is the most common cause of erratic operation at 100 MHz operation.
ICSP programming requires matched PGECx/PGEDx pairs: per Northern Software's dsPIC33CK256MP306 notes, if PGEC2 carries ICSPCLK, ICSPDAT must use PGED2 - mixing pairs from different pins prevents programming. Route exactly one pair to the programming header and keep it free of conflicting peripherals in your pin-mapping utility. Also verify the internal oscillator configuration fuses before first power-up, since clock misconfiguration can lock out debug access.
Use the ADC-to-PWM hardware trigger path rather than software-initiated sampling in control loops: hardware triggering removes interrupt jitter, which directly reduces control-loop noise in FOC and digital power applications. Keep high-current PWM/triangle carrier traces away from ADC input traces and use a dedicated low-impedance analog ground region near the ADC pins. The 12-bit converters will only deliver full accuracy with clean reference decoupling.
Impormasyon ng Pagsunod sa Kautusan
RoHS compliant and lead-free per standard Microchip -I suffix industrial parts; the -I/MR is not AEC-Q100 qualified - use the DSPIC33CK256MP306-H/MR variant for AEC-Q100.
