DSPIC33CK256MP606T-I/MR - 100MHz 256KB DSC, CAN FD | Microchip
MPN: DSPIC33CK256MP606T-I/MR ✓ NakahandaDSPIC33CK256MP606T-I/MR Ulas
A digital signal controller combines the compute throughput of a digital signal processor with the peripheral integration and control-loop responsiveness of a microcontroller. Within the power-management hierarchy, the DSC sits between general-purpose MCUs and dedicated DSPs, making it the preferred choice for high-frequency closed-loop control such as field-oriented motor control, digital power conversion, and embedded sensing where deterministic interrupt latency matters.
Key differentiating features include the 100 MHz dsPIC DSC core with DSP instruction extensions, dual-partition flash enabling live firmware updates between partitions, a high-speed 12-bit ADC, dedicated motor-control PWM peripherals, on-chip operational amplifiers, and CAN FD connectivity for automotive and industrial networks. Functional Safety (FuSa) support documents make the part suitable for safety-relevant designs.
Architecturally, the dsPIC33CK core uses a modified Harvard pipeline with multiple internal buses, 8 DMA channels, and 4 external interrupt sources, allowing the ADC, PWM, and DMA to operate in tight loops with minimal CPU intervention. The dual-panel flash architecture supports partition swapping for robust OTA-style updates.
Typical applications include brushless DC and PMSM motor control for industrial drives, digitally controlled power supplies and 48 V to 12 V DC/DC converter reference designs such as the EPC9143, automotive CAN FD nodes, and precision sensing systems.
Design consideration: connect every VDD and VSS pin pair; per Microchip documentation, leaving any supply pin unconnected can cause programming failures on this family.
This page synthesizes distributor availability, same-package drop-in alternatives, and practical design notes not consolidated in the manufacturer datasheet.
Mga alternatibo na pwedeng ilagay na DSPIC33CK256MP606T-I/MR — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok DSPIC33CK256MP606T-I/MR (parehas na form factor at footprint) — pagkakaiba sa CAN Interface, Package, Core, RAM, On-chip Op-Amps.
DSPIC33CK256MP606T-E/MR
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
DSPIC33CK256MP606T-H/MR
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
DSPIC33CK256MP506T-I/MR
✅ Drop-In ⚠️ Mga Talaan Hindi NaiwerikmoMagkontak para sa presyo
Tingnan ang Datasheet →DSPIC33CK128MP506-E/MR
✅ Drop-In ⚠️ Mga Talaan Hindi NaiwerikmoMagkontak para sa presyo
Tingnan ang Datasheet →DSPIC33CK256MP606-I/MR
✅ Drop-In ⚠️ Mga Talaan Hindi NaiwerikmoMagkontak para sa presyo
Tingnan ang Datasheet →DSPIC33CK256MP606T-I/MR Mga Pinakamataas na Rating at Electrical Characteristics
| Core | dsPIC33CK 16-bit DSC, single core |
| CPU Speed | 100 MHz (100 MIPS) |
| Program Memory (Flash) | 256 KB (256K x 8), dual partition |
| RAM | 64 KB |
| CAN Interface | CAN FD |
| ADC | 12-bit |
| Peripheral Highlights | OpAmps, high-resolution PWM |
| DMA Channels | 8 |
| External Interrupts | 4 |
| Bilang ng Pins | 64 |
| Packhaging | 64-QFN (9x9 mm), MR |
| Uri ng Pagpapasok | Surface Mount |
| Temperature Grade | I (industrial, -40C to +85C) |
| Functional Safety Support | Yes (FuSa package documentation) |
| Packaging | Tape and Reel (T) |
Gabay sa Pin Configuration ng DSPIC33CK256MP606T-I/MR 64-qfn (9x9 mm), mr
Pin configuration para sa DSPIC33CK256MP606T-I/MR (64-qfn (9x9 mm), mr package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa DSPIC33CK256MP606T-I/MR.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
DSPIC33CK256MP606T-I/MR ay nararapat para sa 6 aplikasyons: Precision Motor Control (FOC), Digital Power Conversion, Automotive CAN FD Nodes, Industrial Automation and Sensing, Battery Management and Power Tools, Audio Signal Processing and Class-D Amplifiers.
Precision Motor Control (FOC)
The DSPIC33CK256MP606T-I/MR fits brushless DC and PMSM field-oriented control because its 100 MHz (100 MIPS) core executes Clarke/Park transforms and PI current loops at PWM frequencies well above audible range, while the 12-bit ADC samples phase currents with minimal latency. Dedicated high-resolution PWM peripherals generate complementary dead-banded gate signals, and the on-chip op-amps amplify low-level shunt-resistor currents, removing external amplifiers and cutting BOM cost. The 8-channel DMA transfers ADC results to RAM without CPU intervention, keeping interrupt load deterministic for the control loop. Placed at the heart of an inverter board, the DSC handles both the fast inner current loop and slower speed/position loops in a single chip, with CAN FD available for drive-level networking. Design trade-off: the 64-QFN (9x9 mm) package needs a solid ground pad and via array to dissipate switching-adjacent heat in enclosed drives.
Inirekomenda
Digital Power Conversion
In digitally controlled power supplies, the DSPIC33CK256MP606T-I/MR closes voltage- and current-mode loops with sub-microsecond latency: the 12-bit ADC is triggered directly by the PWM peripheral, and the 100 MHz core executes compensator math within one switching period even at hundreds of kHz. Microchip demonstrates this domain with the EPC9143 48 V-to-12 V DC/DC brick reference design, which pairs an eGaN FET stage with a dsPIC33CK-family DSC, proving the architecture in high-frequency GaN converters. The high-resolution PWM provides fine duty-cycle resolution critical for tight output regulation, while 8 DMA channels stream telemetry to CAN FD for power-shelf or telecom-rectifier monitoring. The dual-partition flash allows firmware update of the control law without bricking the converter. Consideration: keep the analog supply of the ADC clean with dedicated LC filtering so switching noise does not degrade conversion accuracy.
Inirekomenda
Automotive CAN FD Nodes
The integrated CAN FD controller makes the DSPIC33CK256MP606T-I/MR a strong fit for automotive and industrial network nodes such as pump controllers, actuator drivers, and sensor hubs. CAN FD raises payload to 64 bytes and supports faster arbitration/data phases than classical CAN, letting one node transport diagnostic and control traffic on the same bus. The -E and -H temperature variants of this same die extend operation to +125C and +150C respectively, and the -E grade is noted as AEC-Q100 qualified per Microchip USA, giving a qualification path within one PCB footprint. On-chip 256 KB dual-partition flash supports field firmware updates over the CAN bus itself, while 64 KB RAM buffers network stacks and DSP pre-processing simultaneously. Layout tip: route the CAN transceiver within a few centimeters of the DSC pins and place the common-mode choke at the connector for EMC compliance.
Inirekomenda
Industrial Automation and Sensing
For factory automation endpoints, the DSPIC33CK256MP606T-I/MR combines real-time DSP computation with rich analog acquisition: the 12-bit ADC digitizes sensor channels, on-chip op-amps condition millivolt-level signals such as pressure bridges or current shunts, and DMA streams results without CPU overhead. The 100 MIPS core runs filtering (FIR/IIR), FFT-based vibration analysis, or sensor-fusion math locally, reducing data sent upstream. The industrial temperature grade (-40C to +85C) matches typical factory-floor enclosures, and the Functional Safety (FuSa) documentation package supports safety-managed machinery designs per DigiKey's categorization of the part. CAN FD links the node into deterministic industrial networks. Because all VDD/VSS pins must be connected per Microchip documentation, verify full supply-pin routing in multi-layer boards. Trade-off: the 64-pin QFN requires careful PCB fanout versus a TQFP, but saves significant board area in dense I/O modules.
Inirekomenda
Battery Management and Power Tools
The DSPIC33CK256MP606T-I/MR suits battery management and cordless power-tool controllers where cell monitoring, fuel gauging, and motor drive coexist. The 12-bit ADC and on-chip op-amps measure cell voltages and pack current through shunts, the 100 MHz core executes coulomb counting and protection state machines, and high-resolution PWM drives the tool motor inverter with FOC efficiency. 64 KB RAM holds look-up tables and logging buffers, while CAN FD or UART links communicate state-of-charge data to chargers and displays. The dual-partition flash enables safe firmware updates in the field, important for evolving charge algorithms. The -E/-H temperature variants support thermally aggressive tool housings. Design note: trigger ADC conversions synchronously with PWM to avoid sampling during switching transients, and keep the analog ground plane separate under the ADC pins to preserve measurement accuracy across the -40C to +85C ambient range.
Inirekomenda
Audio Signal Processing and Class-D Amplifiers
With a 100 MHz DSP-enhanced core and 64 KB RAM, the DSPIC33CK256MP606T-I/MR can implement audio pre-processing and closed-loop Class-D modulation. The DSP instruction set accelerates FIR/IIR filters, dynamic-range compression, and feedback-quieting algorithms for loudspeaker protection, while high-resolution PWM generates the switching waveform for the output stage. The 12-bit ADC samples the feedback and audio inputs, and DMA moves sample blocks without CPU stalls, keeping loop latency low enough for stable modulation at practical switching frequencies. The 256 KB dual-partition flash stores multiple tuning presets that can be switched or updated via CAN FD in installed-audio deployments. For analog quality, filter the ADC reference supply and keep the PWM return paths away from the analog front-end. The industrial temperature grade and QFN thermal pad support fanless amplifier enclosures.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for DSPIC33CK256MP606T-I/MR — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | DSPIC33CK256MP606T-E/MR | DSPIC33CK256MP606T-H/MR | DSPIC33CK256MP506T-I/MR | DSPIC33CK128MP506-E/MR | DSPIC33CK256MP606-I/MR |
|---|---|---|---|---|---|---|
| Package | 64-QFN (9x9 mm) | 64-QFN (9x9 mm) - same | 64-QFN (9x9 mm) - same | 64-QFN (9x9 mm) - same | 64-QFN (9x9 mm) - same | 64-QFN (9x9 mm) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Flash Memory | 256 KB dual partition | 256 KB dual partition | 256 KB dual partition | 128 KB | 128 KB | 256 KB dual partition |
| CPU Speed | 100 MHz (100 MIPS) | 100 MHz | 100 MHz | 100 MHz | 100 MHz | 100 MHz |
| Temperature Range | -40C to +85C (I grade) | to +125C (E grade) | to +150C (H grade) | -40C to +85C (I grade) | to +125C (E grade) | -40C to +85C (I grade) |
| CAN FD | Yes | Yes | Yes | Yes | Yes | Yes |
Pangunahing mga Pagkakaiba
- Extended-temperature drop-in siblings available on the same footprint (kumpara saDSPIC33CK256MP606T-E/MR)
- Double the flash of the MP506 tier at the same 64-pin QFN footprint (kumpara saDSPIC33CK128MP506-E/MR)
- Automotive qualification path without redesign (kumpara saDSPIC33CK256MP606T-H/MR)
Talaan ng Disenyo
Connect every VDD and VSS pin pair on the 64-QFN package. Per the dsPIC33CK256MP606 development documentation (NorthernSoftware), leaving even one supply pin unconnected can cause programming to fail. Decouple each pair with a 0.1 uF ceramic capacitor placed within 2-3 mm of the pins, add one bulk capacitor (4.7-10 uF) near the package, and solder the exposed QFN pad to a stitched ground via array to minimize ground bounce during simultaneous PWM switching at 100 MHz operation.
For motor-control and digital-power layouts, trigger ADC sampling directly from the PWM peripheral and route the current-shunt analog traces away from gate-drive returns. Keep the analog reference (VREF) path star-routed with dedicated decoupling; switching transients from the inverter stage sharing the same ground region can shift 12-bit conversions by multiple LSBs. Use the QFN center pad as the single low-inductance ground reference and avoid splitting ground planes under the DSC.
When migrating between temperature grades (-I, -E, -H), the parts are pin-to-pin and firmware-compatible, but verify derating of maximum clock at the highest ambient for the -H grade per the family datasheet before finalizing thermal design. Also note the dual-partition flash behavior: the device boots from a selectable partition; an incorrect FBOOT configuration can make a freshly programmed board appear dead, so confirm partition settings in your programmer project before mass production.
Impormasyon ng Pagsunod sa Kautusan
Compliance certificates not present in provided web data; the -E/MR variant is described as AEC-Q100 qualified per Microchip USA. Verify RoHS/REACH certificates on the Microchip product page for the specific date code.
