DSPIC33EP64GS502T-E/MX - 70 MIPS 64KB Digital Power DSC | Microchip
MPN: DSPIC33EP64GS502T-E/MX ✓ NakahandaDSPIC33EP64GS502T-E/MX Ulas
A digital signal controller combines the compute throughput of a digital signal processor with the control peripherals, interrupt architecture and ease of use of a microcontroller. Within the power-management hierarchy, the dsPIC33EP family sits at the level of a dedicated power-conversion controller, bridging general-purpose MCUs and full DSPs. The dsPIC33EP64GS502 belongs to the SMPS and Digital Power Conversion family (dsPIC33EPXXGS50X), purpose-built for multi-loop digital switch-mode power supplies.
Key features include a 16-bit dsPIC33EP core with DSP engine, high-resolution PWM modules suited to peak-current-mode and multi-phase converters, and serial connectivity via I2C, SPI, UART and IrDA. The extended temperature grade (E suffix) supports automotive-adjacent and industrial environments up to 125C ambient.
Architecturally, the device pairs a pipelined 16-bit core with dedicated DSP instructions (MAC, DSP multiply) and fast interrupt handling, allowing closed-loop control loops for buck, boost, LLC and PFC stages to execute at hundreds of kHz update rates. According to Microchip product documentation, the GS50X family is optimized specifically for digital power applications rather than general embedded control.
Typical applications include AC-DC and DC-DC SMPS controllers, digital PFC stages, LED drivers, battery chargers, solar micro-inverters and intelligent lighting/power-supply subsystems where adaptive control algorithms replace analog compensation networks.
Design consideration: because the MX package is a 6x6 mm UQFN with an exposed thermal pad, allocate a solid ground pour and thermal vias under the pad; also verify PWM dead-time and ADC sampling synchronization in firmware, as digital power performance depends more on loop timing than on raw MIPS.
This page synthesizes verified distributor data, same-family drop-in alternatives, datasheet navigation and application guidance in one place, adding cross-reference and design value beyond the manufacturer datasheet alone.
Mga alternatibo na pwedeng ilagay na DSPIC33EP64GS502T-E/MX — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok DSPIC33EP64GS502T-E/MX (parehas na form factor at footprint) — pagkakaiba sa Package, Packaging, Program Memory (Flash), Mounting Type, Core.
DSPIC33EP64GS502-E/MX
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →DSPIC33EP64GS502T-I/MX
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
DSPIC33EP64GS502T-E/2N
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →DSPIC33EP32GS502T-E/MX
✅ Drop-In ⚠️ Mga Talaan Hindi NaiwerikmoMagkontak para sa presyo
Tingnan ang Datasheet →DSPIC33EP128GS502T-E/MX
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
DSPIC33EP64GS506T-E/MX
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
DSPIC33EP64GS502T-E/MX Mga Pinakamataas na Rating at Electrical Characteristics
| Core Architecture | 16-bit dsPIC33EP Digital Signal Controller |
| Max CPU Speed | 70 MIPS |
| Program Memory Size | 64 KB (64K x 8) FLASH |
| RAM Size | 8 KB |
| Packhaging | 28-UQFN (MX), 6x6 mm |
| Hanay ng Temperature na Operasyon | -40C to +125C (E grade) |
| Interface Peripherals | I2C, SPI, UART, IrDA |
| Application Focus | SMPS and Digital Power Conversion |
| Uri ng Pagpapasok | Surface Mount |
| Packaging | Tape & Reel (T suffix) |
| Functional Safety Support | Yes (dsPIC33EP FuSa family) |
| Tindminan RoHS | Compliant (per Microchip product family policy) |
Gabay sa Pin Configuration ng DSPIC33EP64GS502T-E/MX 28-uqfn (mx), 6x6 mm
Pin configuration para sa DSPIC33EP64GS502T-E/MX (28-uqfn (mx), 6x6 mm package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa DSPIC33EP64GS502T-E/MX.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
DSPIC33EP64GS502T-E/MX ay nararapat para sa 6 aplikasyons: AC-DC SMPS Digital Controller, Digital PFC Stage Control, DC-DC Converter Modules, LED Drivers and Intelligent Lighting, Battery Chargers, Solar Micro-Inverters.
AC-DC SMPS Digital Controller
The DSPIC33EP64GS502T-E/MX is purpose-built by Microchip for multi-loop digital switch-mode power supplies, per the manufacturer product page. Its 70 MIPS 16-bit core with DSP multiply-accumulate instructions executes voltage- and current-loop compensator ISRs at hundreds of kHz, while dedicated PWM and ADC peripherals support peak-current-mode control of flyback, forward and LLC stages. Firmware-based compensation replaces analog error amplifiers, enabling adaptive tuning, soft-start profiles and digital protection (OCP/OVP/OTP) in one IC. Placed as the sole control IC on the secondary or primary side, it reduces BOM count and allows field firmware updates; the trade-off versus analog controllers is firmware validation effort.
Inirekomenda
Digital PFC Stage Control
Power-factor-correction stages in AC-DC supplies benefit directly from this DSC. The DSPIC33EP64GS502T-E/MX samples the input voltage, inductor current and bus voltage with its fast ADC, and generates the boost-switch PWM duty from a firmware compensator - average-current-mode PFC loops update cleanly at the device's 70 MIPS throughput. Digital implementation allows phase management, inrush control and dynamic bus-voltage trimming that analog PFC chips cannot offer. The E temperature grade (-40C to +125C) suits sealed adapters and enclosed power supplies near hot components. Design consideration: budget the control-loop ISR execution time carefully so ADC sampling, compensator math and PWM update all complete inside one switching period.
Inirekomenda
DC-DC Converter Modules
For point-of-load and intermediate-bus DC-DC bricks, the DSPIC33EP64GS502T-E/MX provides multi-loop control (voltage, current, temperature) in a compact 28-UQFN 6x6 mm footprint that fits dense power modules. Its 64 KB FLASH stores multiple converter profiles selectable at runtime, and the 8 KB RAM handles state machines and telemetry buffering. UART/I2C links report VOUT, IOUT and fault status to a system host via PMBus-style messaging implemented in firmware. Compared with dedicated analog controllers, the digital approach adds programmability (sequencing, margining, foldback) at the cost of quiescent firmware complexity; the E temperature rating supports automotive-adjacent module environments.
Inirekomenda
LED Drivers and Intelligent Lighting
High-current LED drivers demand precise, dimmable, thermally protected current control - a natural fit for this DSC. The DSPIC33EP64GS502T-E/MX drives buck or boost LED stages with its PWM outputs, implementing firmware dimming curves (PWM, analog or CCR dimming), multi-string current balancing and 2-wire or DALI-style communication over UART/I2C. Per the Microchip product family description, intelligent lighting power supplies are an explicitly supported GS50X use case. The 70 MIPS core leaves headroom for color-mixing and presence-detection logic in the same IC, consolidating driver and controller functions; the extended temperature grade tolerates luminaire enclosure heat.
Inirekomenda
Battery Chargers
Multi-chemistry battery chargers (Li-ion, lead-acid, NiMH) require staged CC/CV charging profiles, thermal derating and safety cutoffs - all firmware tasks this DSC handles in one chip. The DSPIC33EP64GS502T-E/MX closes the charging current loop at high update rate using its PWM and fast ADC, executes charge-state machines from its 64 KB FLASH, and communicates charge status to a host over UART or I2C. Digital control enables adaptive algorithms (impedance tracking, dynamic charge termination) impossible with fixed analog chargers. Its -40C to +125C E grade covers vehicle and industrial charging environments. Verify ADC channel count in the datasheet matches your voltage/current/temperature sensing budget.
Inirekomenda
Solar Micro-Inverters
Micro-inverter control demands simultaneous MPPT execution, grid-synchronous current injection and safety monitoring - a workload matched to the DSPIC33EP64GS502T-E/MX's 70 MIPS DSP core. Firmware runs the MPPT search while a second control loop shapes the grid current waveform via the high-resolution PWM outputs, with grid-fault detection (over/under voltage and frequency) in software. The 64 KB FLASH accommodates MPPT, grid-connection and communication firmware together. The extended temperature grade suits outdoor, thermally stressed enclosures. Trade-off versus dedicated inverter ASICs: full flexibility and certification-driven firmware control in exchange for higher software validation effort and loop-timing discipline.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for DSPIC33EP64GS502T-E/MX — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | DSPIC33EP64GS502-E/MX | DSPIC33EP64GS502T-I/MX | DSPIC33EP64GS502T-E/2N | DSPIC33EP32GS502T-E/MX | DSPIC33EP128GS502T-E/MX |
|---|---|---|---|---|---|---|
| Package | 28-UQFN (MX) 6x6 mm | 28-UQFN (MX) 6x6 - same | 28-UQFN (MX) 6x6 - same | 28-UQFN 6x6 - verify footprint code | 28-UQFN (MX) 6x6 - same | 28-UQFN (MX) 6x6 - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| FLASH Program Memory | 64 KB | 64 KB | 64 KB | 64 KB | 32 KB | 128 KB |
| CPU Speed | 70 MIPS | 70 MIPS | 70 MIPS | 60-70 MIPS (listing variance - verify) | 70 MIPS | 70 MIPS |
| Operating Temperature | -40C to +125C (E) | -40C to +125C (E) | -40C to +85C (I) | -40C to +125C (E) | -40C to +125C (E) | -40C to +125C (E) |
| RAM | 8 KB | 8 KB | 8 KB | 8 KB | 8 KB | 8 KB |
| Serial Peripherals | I2C, SPI, UART, IrDA | I2C, SPI, UART, IrDA | I2C, SPI, UART, IrDA | I2C, SPI, UART, IrDA | I2C, SPI, UART, IrDA | I2C, SPI, UART, IrDA |
Pangunahing mga Pagkakaiba
- Extended -40C to +125C temperature grade (kumpara saDSPIC33EP64GS502T-I/MX)
- Upgrade path without PCB change (kumpara saDSPIC33EP128GS502T-E/MX)
- Digital-power-optimized peripheral set (kumpara saGeneric dsPIC33EP GP502 family parts)
- Trade-off: no verified cross-brand drop-in (kumpara saSTM32F334 (conceptual equivalent))
Talaan ng Disenyo
The 28-UQFN (MX) 6x6 mm package has a central exposed thermal pad that must be soldered to a grounded copper pour for both thermal dissipation and a low-inductance ground return. Use a 4x4 (or per-land-pattern-recommendation) via array under the pad to tie into inner ground planes. Follow the Microchip UQFN land-pattern guideline exactly - paste segmentation on the thermal pad prevents solder voiding and device tombstoning during reflow.
Decouple each VDD pin with a 0.1 uF ceramic capacitor placed within 2 mm of the pin, plus one bulk 4.7-10 uF capacitor near the device (typical dsPIC33EP practice; verify exact values in the datasheet capacitor table). In digital power layouts, keep the controller's analog supply separate from power-stage gate-drive rails, or filter the controller supply with an RC/LC network, so switching-node transients do not corrupt ADC readings and cause control-loop jitter.
Two frequent errors: (1) forgetting that ICSP programming pins (MCLR, PGD, PGC) must have header access on the production PCB - omitting them forces rework; (2) assuming the /MX and /2N ordering codes share an identical land pattern - they are different package codes, so verify the datasheet outline before a BOM substitution. Also configure unused I/O as outputs-low or inputs with pull resistors per Microchip's I/O guideline to prevent floating-pin leakage in power products.
In SMPS layouts, route the PWM outputs away from ADC input traces and the crystal/OSC pins; a switching node running millivolts of coupled noise into an ADC sense line translates directly into output-voltage ripple in a digital control loop. Keep the sense traces as a Kelvin connection to the shunt or divider, and sample ADC as far from the PWM switching edge as the loop timing allows.
Impormasyon ng Pagsunod sa Kautusan
RoHS/lead-free inferred from Microchip current-production policy for dsPIC33EP MX-package parts; per-part certificate not present in retrieved data - confirm via Microchip environmental datasheet. Not an AEC-Q100 qualified ordering code; the Q1/automotive variants of the family carry that qualification.
