Silicon Labs

EFM32G200F32-QFN32T - 32MHz Cortex-M3 32KB Flash MCU | Silicon Labs

MPN: EFM32G200F32-QFN32T ✓ Nakahanda
1.98 V to 3.8 V Vdss 32-QFN exposed pad, 6 mm x 6 mm Package 32 MHz Speed 32 KB Memory
MOQ: 1 |

EFM32G200F32-QFN32T Ulas

The Silicon Labs EFM32G200F32-QFN32T is a 32-bit ARM Cortex-M3 Gecko microcontroller operating up to 32 MHz, with 32 KB of Flash memory, 8 KB of RAM, and 24 digital I/O pins in a 32-QFN exposed-pad package. It is designed for energy-sensitive embedded systems requiring fast wake-up behavior and energy-saving operating modes.

A microcontroller is a programmable system-on-chip that integrates a processor core, nonvolatile Flash memory, volatile RAM, peripheral interfaces, and clocking into one compact component. The EFM32 Gecko family belongs to the embedded microcontroller and power-management IC hierarchy. It combines deterministic control capability with low-power operation, making it suitable for connected sensors, compact industrial controls, portable instruments, and battery-operated products.

Principal features include a maximum CPU speed of 32 MHz, 32 KB of program Flash, 8 KB of RAM, 24 digital I/O pins, and two 16-bit timers. The device also provides four 12-bit analog-to-digital converter channels and one 12-bit digital-to-analog converter channel. Its operating supply range is 1.98 V to 3.8 V, and the surface-mount package measures 6 mm by 6 mm with an exposed thermal pad.

The Cortex-M3 core supports efficient event-driven firmware, while the Gecko low-power platform offers fast wake-up times and multiple energy-saving modes. These characteristics help reduce both average current draw and response latency in applications that spend most of their time sleeping. Peripherals can be clock-gated to further reduce consumption when their functions are not required.

Typical uses include low-power wireless sensor nodes, building-automation endpoints, compact motor and actuator controllers, portable measurement equipment, and IoT devices that transmit small packets of sensor data. The 32 KB Flash budget is suitable for moderate embedded applications, while 8 KB of RAM accommodates short task stacks and localized data buffers.

When laying out the board, use a thermal-aware exposed-pad pattern with a solid ground plane and multiple short thermal vias. Place the decoupling capacitor close to the supply pins and route analog inputs away from switching nodes. Firmware should enable the deepest suitable sleep mode between events, since average power consumption in an IoT product is often dominated by idle time rather than active processing.

This page combines device specifications, drop-in upgrade options, package-level guidance, and application-oriented design notes to support schematic capture, PCB layout, firmware planning, and component selection.

Mga alternatibo na pwedeng ilagay na EFM32G200F32-QFN32T — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

Variante sa Seri na ito

Katulad na modelo sa serye na katugma sa pagpasok EFM32G200F32-QFN32T (parehas na form factor at footprint) — pagkakaiba sa Package, Flash Memory, Digital I/O Pins, ADC, Architecture.

Silicon Labs
Package: 32-pin QFN (6x6 mm) with exposed pad
Flash Memory: 16 kB (16K x 8)
Ikabit sa EFM32G200F32-QFN32T →
Silicon Labs
Package: 32-QFN (6x6 mm) with exposed pad
ADC: 12-bit
Ikabit sa EFM32G200F32-QFN32T →
Silicon Labs
Package: 32-QFN (6 x 6 mm)
Flash Memory: 64 kB
Digital I/O Pins: 24 pins
Ikabit sa EFM32G200F32-QFN32T →

EFM32G200F16-QFN32T

✅ Drop-In
Silicon Labs
📦 32-QFN (6x6) Exposed Pad
Silicon Labs (formerly Energy Micro) · EFM32 Gecko · ARM Cortex-M3 (32-bit RISC) · 32 MHz · 1.25 Dhrystone MIPS/MHz · 16 kB (16K x 8) · 8 kB · 1.98 V to 3.8 V

Magkontak para sa presyo

Tingnan ang Datasheet →

EFM32G200F64-QFN32T

✅ Drop-In
Silicon Labs
📦 32-QFN (6x6) Exposed Pad
32-bit ARM Cortex-M3 microcontroller · ARM Cortex-M3 · 32 MHz · 64 kB · 16 kB · 24 pins · 2 timers · 16-bit

Magkontak para sa presyo

Tingnan ang Datasheet →

EFM32G210F32-QFN32T

✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo
📦 32-QFN (6x6) Exposed Pad
Same-brand Gecko family upgrade with 32 KB Flash; peripheral configuration may differ and requires pin-function verification

📋 Alternatibo na Reference (hindi sa katalogo)

EFM32G230F32-QFN32T

✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo
📦 32-QFN (6x6) Exposed Pad
Same-brand Gecko family option with 32 KB Flash; upgraded peripheral set may replace some G200 functions, so pin mapping must be checked

📋 Alternatibo na Reference (hindi sa katalogo)

EFM32G200F32-QFN32

✅ Drop-In
Silicon Labs
📦 32-QFN (6x6) Exposed Pad
ARM Cortex-M3 · 32-Bit · 32 MHz · 32 kB (32K x 8) · 8 kB · 1.98 V to 3.8 V · 24 · 2 x 16-bit

Magkontak para sa presyo

Tingnan ang Datasheet →

EFM32G200F32-QFN32T Mga Pinakamataas na Rating at Electrical Characteristics

Product Type 32-bit ARM Cortex-M3 Gecko microcontroller
Maximum CPU Frequency 32 MHz
Flash Memory 32 KB
RAM 8 KB
Digital I/O Pins 24
Timers 2 x 16-bit
ADC 4 x 12-bit
DAC 1 x 12-bit
Supply Voltage Range 1.98 V to 3.8 V
Temperature na Operasyon -40 C to +85 C
Packhaging 32-QFN exposed pad, 6 mm x 6 mm
Uri ng Pagpapasok Surface mount
Architecture ARM Cortex-M3, 32-bit single-core
Program Memory Type Flash
AES Hardware Accelerator No
Internal Oscillator Internal
Low-Power Features Fast wake-up and energy-saving modes

Gabay sa Pin Configuration ng EFM32G200F32-QFN32T 32-qfn exposed pad, 6 mm x 6 mm

Pin configuration para sa EFM32G200F32-QFN32T (32-qfn exposed pad, 6 mm x 6 mm package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.

Pinout diagram ng 32-qfn exposed pad, 6 mm x 6 mm package para sa EFM32G200F32-QFN32T

Wala ng detalyadong pinout data na magagamit para sa EFM32G200F32-QFN32T.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

EFM32G200F32-QFN32T ay nararapat para sa 6 aplikasyons: Battery-Powered Wireless Sensor Nodes, Industrial Control and Sensor Hubs, Building Automation Endpoints, Portable Measurement Instruments, Compact Motor and Actuator Control, IoT Data Acquisition and Remote Monitoring.

🧩

Battery-Powered Wireless Sensor Nodes

The EFM32G200F32-QFN32T fits compact wireless sensor nodes because its Cortex-M3 core runs up to 32 MHz while the Gecko platform supports fast wake-up and energy-saving modes. The 32 KB Flash stores the radio driver, sensing logic, and protocol state, while 8 KB RAM supports packet buffers and short task stacks. A sensor duty cycle can place the MCU between sleep and active states without adding a separate low-power controller. Firmware should clock-gate unused peripherals, disable unneeded ADC channels, and wake on timer or sensor events. Actual battery life depends on radio transmission energy and the selected sleep mode, so validate current draw in the complete enclosure and battery configuration.

🏭

Industrial Control and Sensor Hubs

The EFM32G200F32-QFN32T is suitable for small industrial sensor hubs that combine four 12-bit ADC channels, two 16-bit timers, and 24 digital I/O pins in a compact 6 mm by 6 mm footprint. The four ADC inputs can monitor temperature, pressure, or analog process signals, while the timers support periodic sampling and output switching. Its 1.98 V to 3.8 V supply range accommodates common 3.3 V industrial rails after appropriate regulation. Keep analog traces short and isolated from switching nodes, and use the exposed pad as a solid thermal connection. Firmware should use periodic wake-up, debounced digital inputs, and a defined fault state for sensor or communication timeouts.

🏠

Building Automation Endpoints

The EFM32G200F32-QFN32T can serve as the controller for building-automation endpoints such as occupancy sensors, room controllers, and small HVAC interfaces. Its 24 digital I/O pins provide flexible connections to switches, relays, and digital sensors, while the 12-bit ADC supports analog level monitoring. The energy-saving modes are valuable in facilities where endpoints remain idle for long periods. Use a GPIO interrupt or timer to wake the device, then sample only the required ADC channels and transmit the resulting state. The 32 KB Flash budget suits concise control logic and standardized communication stacks. Validate debounce behavior and relay-driver isolation in hardware rather than relying solely on firmware filtering.

🔬

Portable Measurement Instruments

The EFM32G200F32-QFN32T supports compact handheld measurement products that combine battery-powered operation, digital sensing, and local data processing. Four 12-bit ADC channels provide adequate resolution for many temperature, pressure, and resistive-sensor measurements, while the one-channel 12-bit DAC can generate an analog reference or test signal. The 32 MHz Cortex-M3 core performs calibration and filtering without requiring a separate processor. Its low-power behavior improves standby time between measurements, provided the analog front end is also placed into a low-power state. Use buffered sensor inputs where source impedance is high, calibrate offset and gain at production, and keep the 1.98 V to 3.8 V supply within the manufacturer limits.

⚙️

Compact Motor and Actuator Control

The EFM32G200F32-QFN32T can control small motors, solenoids, and actuators where deterministic timing and low standby consumption are important. Two 16-bit timers provide the timing resources needed for pulse generation, capture, or periodic control, and the 24 GPIO pins simplify encoder and switch interfacing. Place power transistors and flyback protection outside the MCU footprint, and keep high-current switching nodes away from the analog inputs. The device can sleep between motion commands while retaining configuration in Flash, reducing quiescent demand. Firmware should include overcurrent, timeout, and watchdog recovery behavior. Because the MCU does not directly drive inductive loads, the external driver stage and thermal design determine the achievable duty cycle.

🌐

IoT Data Acquisition and Remote Monitoring

The EFM32G200F32-QFN32T is appropriate for compact IoT data-acquisition modules that collect a limited number of analog readings and send summarized results over a serial link. The 32 KB Flash can hold networking code, a data packetizer, and application logic, while 8 KB RAM is adequate for short acquisition frames. Schedule ADC conversions and serial transfers with timers rather than continuous polling to reduce power. The one-channel DAC can support sensor compensation or a low-level analog output where required. Use buffered signals and a separate low-noise regulator if the ADC is connected to high-impedance sources. Firmware should buffer results during transient communication outages and retain timestamps through the system real-time counter.

Buod ng mga Inirekomendang Produkto

EFM32G200F16-QFN32T Silicon Labs Ginagamit sa: Battery-Powered Wireless Sensor Nodes, Building Automation Endpoints, IoT Data Acquisition and Remote Monitoring EFM32G200F64-QFN32T Silicon Labs Ginagamit sa: Battery-Powered Wireless Sensor Nodes, Industrial Control and Sensor Hubs, Portable Measurement Instruments, IoT Data Acquisition and Remote Monitoring EFM32G200F32-QFN32 Silicon Labs Ginagamit sa: Industrial Control and Sensor Hubs EFM32G210F32-QFN32T Same-brand family upgrade for additional peripheral options Ginagamit sa: Building Automation Endpoints, Compact Motor and Actuator Control EFM32G230F32-QFN32T Same-brand family option with expanded peripheral capability Ginagamit sa: Portable Measurement Instruments, Compact Motor and Actuator Control
What is the EFM32G200F32-QFN32T?
The EFM32G200F32-QFN32T is a Silicon Labs 32-bit ARM Cortex-M3 Gecko microcontroller rated for operation up to 32 MHz. It integrates 32 KB of Flash, 8 KB of RAM, 24 digital I/O pins, two 16-bit timers, a four-channel 12-bit ADC, and a one-channel 12-bit DAC in a 6 mm by 6 mm 32-QFN exposed-pad package. The manufacturer device page identifies it as an energy-sensitive embedded MCU with fast wake-up and energy-saving modes.
What are the key specifications of EFM32G200F32-QFN32T?
The key EFM32G200F32-QFN32T specifications are a 32 MHz Cortex-M3 core, 32 KB Flash, 8 KB RAM, 24 digital I/O pins, and a 1.98 V to 3.8 V supply range. It also includes two 16-bit timers, four 12-bit ADC channels, and one 12-bit DAC channel. These parameters place the device in the low-power 32-bit embedded MCU category while providing useful analog conversion resources for sensing and control.
Where can I download the EFM32G200F32-QFN32T datasheet PDF?
The official EFM32G200F32-QFN32T documentation is available from the Silicon Labs product page at https://www.silabs.com/mcu/32-bit-microcontrollers/efm32-gecko/device.efm32g200f32-qfn32?tab=specs. From that page, open the device documentation resources for the data sheet, reference manual, and errata. Use the manufacturer documents for authoritative pin assignments, timing limits, electrical characteristics, and package drawings.
What is the pinout of the EFM32G200F32-QFN32T?
The EFM32G200F32-QFN32T uses a 32-QFN package with an exposed pad and operates from 1.98 V to 3.8 V. Assign the PCB footprint and every net from the pin-description table in the manufacturer data sheet, including the exposed-pad connection. Do not derive pad assignments from a generic QFN drawing because the exposed pad and analog-capable pins must follow the device-specific land pattern.
Is the EFM32G200F32-QFN32T suitable for low-power sensor applications?
Yes, the EFM32G200F32-QFN32T is well suited to low-power sensor applications. Its Gecko platform provides fast wake-up behavior and energy-saving modes, while the 32 MHz Cortex-M3 core handles protocol work and local processing. Peripherals can be clock-gated when unused. Actual battery life still depends on sensor duty cycle, radio activity, firmware sleep strategy, and the selected regulator.
What is the EFM32G200F32-QFN32T vs EFM32G200F16-QFN32T difference?
The principal documented difference is Flash capacity: EFM32G200F32-QFN32T provides 32 KB of Flash, while EFM32G200F16-QFN32T provides 16 KB. Both retain the 32-QFN exposed-pad package, 32 MHz operation, 4 x 12-bit ADC, and 1 x 12-bit DAC configuration shown in the comparison data. The F32 option is preferable when the application needs additional code space; the F16 option is not suitable if firmware will not fit in 16 KB.
Can EFM32G200F16-QFN32T replace EFM32G200F32-QFN32T?
EFM32G200F16-QFN32T is a package- and pin-compatible alternative, but it has only 16 KB of Flash versus 32 KB on the EFM32G200F32-QFN32T. It is therefore a drop-in candidate only when the complete firmware image fits within 16 KB, including library code, interrupt handlers, bootloader space, and configuration data. Verify the pin mapping and memory budget before replacing an existing design.
When should I choose EFM32G200F32-QFN32T over EFM32G200F64-QFN32T?
Choose EFM32G200F32-QFN32T when 32 KB of Flash is sufficient and memory cost must be controlled. Choose EFM32G200F64-QFN32T when the application requires up to 64 KB of Flash for a larger protocol stack, bootloader, logging, or application code. Both are EFM32G200-family devices, and the cross-reference identifies the F64 part as a 64 KB Flash option in the same 32-QFN package family.
What is the best drop-in replacement for EFM32G200F32-QFN32T?
EFM32G200F32-QFN32T is already the 32 KB Flash member of the EFM32G200 family, so the closest pin-compatible options are EFM32G200F64-QFN32T for added Flash and EFM32G200F16-QFN32T for reduced Flash. EFM32G210F32-QFN32T and EFM32G230F32-QFN32T are additional same-family upgrade choices in the same 32-QFN footprint. Confirm the exact pinout, peripheral set, firmware dependencies, and memory requirements before substitution.
Is EFM32G200F32-QFN32T the same as EFM32G200F32-QFN32?
EFM32G200F32-QFN32 and EFM32G200F32-QFN32T identify the same Silicon Labs device configuration, with the trailing T denoting the tape-and-reel ordering form. They share the 32-QFN exposed-pad package and 32 KB Flash configuration. Treat the ordering suffix and packaging documentation as purchasing metadata rather than as an indication of different electrical performance.
How much power does the EFM32G200F32-QFN32T consume?
The EFM32G200F32-QFN32T is optimized for low-power operation, but a single current figure cannot describe every operating condition. Consumption varies with CPU activity, clock configuration, enabled peripherals, flash wait states, and sleep mode. Measure the assembled product across active, idle, and deepest-sleep states, and use the manufacturer current-consumption characteristics to select the regulator and battery capacity.
How should the exposed pad of the EFM32G200F32-QFN32T be handled?
The exposed pad should be tied to the device ground plane and thermally connected with multiple short vias. This lowers junction-to-ambient resistance and prevents the QFN package from acting as an ineffective heat spreader when the device operates at elevated ambient temperature. Follow the manufacturer land-pattern dimensions and paste and soldering recommendations rather than constructing a generic QFN footprint.
What peripheral configuration does the EFM32G200F32-QFN32T provide?
The EFM32G200F32-QFN32T provides 24 digital I/O pins, two 16-bit timers, four 12-bit ADC channels, and one 12-bit DAC channel alongside its 32 MHz Cortex-M3 core and 8 KB RAM. These resources support periodic sensing, timer-based control, and low-resolution analog output. Exact pin multiplexing, analog input ranges, and timer functions must be selected in the Silicon Labs configuration tool and confirmed against the data sheet.
Is EFM32G200F32-QFN32T in stock and what is its lead time?
Current availability and lead time change by region, quantity, and supply conditions. Use the Request a Quote form on this page to request a current stock confirmation, volume pricing, minimum order quantity, and manufacturing lead time for the EFM32G200F32-QFN32T. For production planning, ask for the date code, packing quantity, and traceability information along with the shipment schedule.
Where can I buy EFM32G200F32-QFN32T online?
The EFM32G200F32-QFN32T can be requested through the Request a Quote form on this page. The form is the route for current availability, volume pricing, packing options, and lead-time confirmation for this exact 32-QFN tape-and-reel ordering code. Provide your target annual and prototype quantities so the quotation can reflect the appropriate production schedule.
What is the price of EFM32G200F32-QFN32T?
Pricing for the EFM32G200F32-QFN32T depends on order quantity, shipment date, and supply status. Submit the required quantity through the Request a Quote form on this page to receive the current quotation. The same form can confirm availability and lead time at the same time, allowing purchasing and engineering teams to evaluate one consistent offer.

Impormasyon ng Talumpati sa Engineering for EFM32G200F32-QFN32T — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose the EFM32G200F32-QFN32T when a compact, energy-sensitive controller needs a 32 MHz Cortex-M3 core, 32 KB of Flash, 8 KB of RAM, and a practical set of analog and timing peripherals without paying for a larger memory configuration. Use EFM32G200F16-QFN32T only when the final firmware fits within 16 KB and lower memory demand is important. Select EFM32G200F64-QFN32T when a larger bootloader, protocol stack, logging buffer, or future update reserve exceeds 32 KB. For designs requiring additional or different peripherals, evaluate EFM32G210F32-QFN32T and EFM32G230F32-QFN32T against the required pin functions before changing the PCB. All listed alternatives retain the 32-QFN exposed-pad footprint, but firmware, peripheral multiplexing, and supply requirements must still be revalidated.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto EFM32G200F16-QFN32T EFM32G200F64-QFN32T EFM32G210F32-QFN32T EFM32G230F32-QFN32T EFM32G200F32-QFN32
Package 32-QFN (6x6) Exposed Pad 32-QFN (6x6) Exposed Pad 32-QFN (6x6) Exposed Pad 32-QFN (6x6) Exposed Pad 32-QFN (6x6) Exposed Pad 32-QFN (6x6) Exposed Pad
Brand Silicon Labs Silicon Labs Silicon Labs Silicon Labs Silicon Labs Silicon Labs
Flash Memory 32 KB 16 KB 64 KB 32 KB 32 KB 32 KB

Pangunahing mga Pagkakaiba

  • Balanced memory and peripheral allocation (kumpara saEFM32G200F16-QFN32T)
  • Headroom for larger firmware without changing the footprint (kumpara saEFM32G200F64-QFN32T)
  • Low-power Gecko platform with useful mixed-signal resources (kumpara saEFM32G230F32-QFN32T)

Talaan ng Disenyo

Treat the QFN exposed pad as the primary thermal path. Connect it to a low-impedance ground region on the PCB and add several short thermal vias according to the manufacturer land pattern. Keep the pad free of signal traces where possible. Because no junction-to-ambient thermal resistance is stated for this exact ordering code, do not assign a thermal limit without checking the package thermal data and the board's copper geometry.

Place the main supply-decoupling capacitor immediately beside the device power pins, with the shortest possible ground return. Route analog inputs away from switching regulator nodes and digital timing edges. The 32-QFN footprint is compact, so verify pad and mask dimensions against the manufacturer drawing and confirm exposed-pad paste separately if the assembly process requires it.

Do not treat the trailing T ordering suffix as a different electrical variant; it identifies the tape-and-reel ordering form of the same device configuration. The more common mistake is substituting a 16 KB Flash member for a design compiled with 32 KB of images. Check the final linked binary size, reserve space for future updates, and confirm every peripheral pin assignment before approving a substitution.

Low-power performance depends on firmware as much as on the MCU. Put the core into the deepest acceptable sleep mode between events, clock-gate unused peripherals, and disable unused analog channels. Measure average current over a complete operating cycle because wake-up, conversion, and communication bursts can dominate otherwise sleep-state consumption.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

Compliance status must be confirmed from the current manufacturer product documentation or declaration for the exact ordering code. AEC-Q100 is not applicable to this general-purpose microcontroller.

Data napatotohanan sa: 2026-11-10 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

EFM32G200F32-QFN32T datasheet EFM32G200F32-QFN32T datasheet pdf EFM32G200F32-QFN32T pinout EFM32G200F32-QFN32T footprint EFM32G200F32-QFN32T equivalent EFM32G200F32-QFN32T replacement EFM32G200F32-QFN32T price EFM32G200F32-QFN32T stock Silicon Labs EFM32G200F32-QFN32T EFM32G200F32 32MHz Cortex-M3 EFM32G200F32 32-QFN microcontroller EFM32G200F32 low power sensor EFM32G200F32 vs EFM32G200F16 EFM32G200F32-QFN32T lead time

Mga kaugnay na Mga Komponente at mga Tuntunin

Silicon Labs EFM32G200F32-QFN32T EFM32G200F32-QFN32 EFM32G200F16-QFN32T EFM32G200F64-QFN32T EFM32G210F32-QFN32T EFM32G230F32-QFN32T ARM Cortex-M3 EFM32 Gecko 32-bit microcontroller embedded microcontroller system-on-chip semiconductor 32-QFN exposed pad QFN package family surface mount SMD Flash memory RAM 12-bit ADC 12-bit DAC 16-bit timer low-power mode fast wake-up energy-saving mode IoT sensor node industrial control building automation portable measurement motor control
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ