Silicon Labs

EFM32ZG222F16-B-QFP48 - 24MHz 16KB Cortex-M0+ MCU | Silicon Labs

MPN: EFM32ZG222F16-B-QFP48 ✓ Nakahanda
1.98 V to 3.8 V Vdss 0.5 µA Id 48-pin TQFP, 7 mm x 7 mm Package 24 MHz Speed 16 KB Memory
MOQ: 1 |

EFM32ZG222F16-B-QFP48 Ulas

The Silicon Labs EFM32ZG222F16-B-QFP48 is a 32-bit ARM Cortex-M0+ microcontroller operating up to 24 MHz, with 16 KB of Flash memory, 4 KB of RAM, and 37 digital I/O pins in a 48-pin TQFP package measuring 7 mm by 7 mm. It belongs to the EFM32 Zero Gecko family and is designed for compact, energy-sensitive embedded systems.

An ARM Cortex-M0+ microcontroller is a programmable semiconductor that combines a processor core, memory, and peripherals on one chip. The Cortex-M0+ architecture sits within the ARM embedded processor hierarchy, while the EFM32 Zero Gecko family adds low-power operating modes, fast wake-up behavior, autonomous peripherals, analog functions, and communication peripherals. This combination places the device in the broader category of embedded processors and microcontrollers used for control-oriented electronic products.

The EFM32ZG222F16-B-QFP48 provides 16 KB of Flash for firmware, 4 KB of SRAM for working data, and up to 24 MHz processing performance. Its 37 digital I/O pins support external sensing, control, communications, and user-interface functions. The family data sheet also identifies two 16-bit timers, low-power Stop operation down to 0.5 µA, and Run-mode consumption of 114 µA/MHz. These characteristics make the device suitable when both fast control response and long battery life are important.

The device integrates an ARM Cortex-M0+ core with energy-conscious peripherals designed to operate without continuous CPU intervention. Its low-power platform supports fast wake-up from energy-saving states, while the Zero Gecko family emphasizes analog and digital integration in a small package. The 48-pin TQFP provides more I/O and peripheral connectivity than smaller QFN packages, making this configuration useful for designs requiring both compact size and a generous pin count.

Typical applications include smart energy and gas metering, water-monitoring equipment, industrial sensing nodes, low-power connected sensors, portable instrumentation, and embedded control systems. The 24 MHz Cortex-M0+ core can execute protocol handling, acquisition logic, and control algorithms, while the 16 KB Flash budget is best suited to focused firmware rather than large graphical or storage-intensive applications. Its 37 digital I/O pins also permit multiple sensors, indicators, and communication interfaces to share one controller.

When designing the circuit, connect AVDD_x, VDD_DREG, and IOVDD_x according to the recommendations in the EFM32ZG222 data sheet and application note AN0002, EFM32 Hardware Design Considerations. Keep power and ground routing short, place decoupling capacitors close to their supply pins, and confirm the package dimensions and exposed-pad requirements against the exact ordering code before releasing artwork.

This product overview combines the device specifications, drop-in-family comparisons, and application guidance engineers need when evaluating the EFM32ZG222F16-B-QFP48 for an energy-conscious embedded design. It also highlights the trade-offs between Flash capacity, package choice, and low-power operation for faster engineering decisions.

Mga alternatibo na pwedeng ilagay na EFM32ZG222F16-B-QFP48 — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

Variante sa Seri na ito

Katulad na modelo sa serye na katugma sa pagpasok EFM32ZG222F16-B-QFP48 (parehas na form factor at footprint) — pagkakaiba sa Flash Memory, Package, Run Mode Current, Stop Mode Current, Timer Count.

Silicon Labs
Package: 48-pin TQFP (7 x 7 mm)
Run Mode Current: 114 microamps/MHz
Stop Mode Current: 0.5 microamp
Ikabit sa EFM32ZG222F16-B-QFP48 →
Silicon Labs
Flash Memory: 32 kB
Package: 48-TQFP (7 x 7 mm)
Run Mode Current: 114 uA/MHz
Ikabit sa EFM32ZG222F16-B-QFP48 →
Silicon Labs
Flash Memory: 8 KB (8K x 8)
Package: 48-pin TQFP (7 x 7 mm)
Timer Count: 2 x 16-bit timers
Ikabit sa EFM32ZG222F16-B-QFP48 →

EFM32ZG222F16-QFP48

✅ Drop-In
Silicon Labs
📦 48-pin TQFP (7x7)
ARM Cortex-M0+ 32-bit microcontroller · EFM32 Zero Gecko · 24 MHz · 16 kB · 16K x 8 · 4 kB · 37 · 2

Magkontak para sa presyo

Tingnan ang Datasheet →

EFM32ZG222F32-QFP48

✅ Drop-In
Silicon Labs
📦 48-pin TQFP (7x7)
32-bit ARM Cortex-M0+ microcontroller · EFM32 Zero Gecko · 24 MHz · 32 kB · 4 kB · 37 · 2 x 16-bit timers · 1.98 V to 3.8 V

Magkontak para sa presyo

Tingnan ang Datasheet →

EFM32ZG222F8-QFP48

✅ Drop-In
Silicon Labs
📦 48-pin TQFP (7x7)
32-bit ARM Cortex-M0+ microcontroller · EFM32 Zero Gecko · 24 MHz · ARM Cortex-M0+ · 8 KB (8K x 8) · 2 KB · 37 pins · 2 x 16-bit timers

Magkontak para sa presyo

Tingnan ang Datasheet →

EFM32ZG222F16-B-QFP48 Mga Pinakamataas na Rating at Electrical Characteristics

Product Type 32-bit ARM Cortex-M0+ microcontroller
Series EFM32 Zero Gecko
Maximum CPU Frequency 24 MHz
Flash Memory 16 KB
Flash Organization 16K x 8 bits
RAM Memory 4 KB
Digital I/O Pins 37 pins
Timer Count 2 timers
Timer Resolution 16-bit
Supply Voltage Range 1.98 V to 3.8 V
Stop Mode Current 0.5 µA
Run Mode Current 114 µA/MHz
Processor Core ARM Cortex-M0+
Word Architecture 32-bit
Packhaging 48-pin TQFP, 7 mm x 7 mm
Uri ng Pagpapasok Surface mount

Gabay sa Pin Configuration ng EFM32ZG222F16-B-QFP48 48-pin tqfp, 7 mm x 7 mm

Pin configuration para sa EFM32ZG222F16-B-QFP48 (48-pin tqfp, 7 mm x 7 mm package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.

Pinout diagram ng 48-pin tqfp, 7 mm x 7 mm package para sa EFM32ZG222F16-B-QFP48

Wala ng detalyadong pinout data na magagamit para sa EFM32ZG222F16-B-QFP48.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

EFM32ZG222F16-B-QFP48 ay nararapat para sa 6 aplikasyons: Smart Energy Metering, Gas and Water Monitoring, Industrial Sensor Nodes, Portable Medical Devices, Low-Power Connected Equipment, Compact Embedded Control.

⚡

Smart Energy Metering

The EFM32ZG222F16-B-QFP48 fits metering nodes that must measure, process, and communicate data within a constrained energy budget. Its 24 MHz ARM Cortex-M0+ core supports acquisition logic and communication routines, while 16 KB of Flash stores focused firmware and 4 KB of RAM handles working data. The 37 digital I/O pins allow pulse counting, status indication, and external sensor interfaces. According to the EFM32ZG family data sheet, operation down to 0.5 µA in Stop mode helps reduce energy use between measurement events.

🏭

Gas and Water Monitoring

The EFM32ZG222F16-B-QFP48 can supervise gas, water, and flow-sensing modules that combine low-duty-cycle measurement with local status reporting. Its 16 KB Flash is suitable for compact acquisition and protocol firmware, and its 37 digital I/O pins provide ample connections for sensor inputs, alarm outputs, and serial interfaces. The device's 114 µA/MHz Run-mode figure and 0.5 µA Stop-mode figure support designs intended to extend battery life between readings.

🧩

Industrial Sensor Nodes

The EFM32ZG222F16-B-QFP48 is appropriate for industrial sensor nodes that gather digital measurements and perform local control near the sensed equipment. Its 24 MHz Cortex-M0+ core provides enough performance for sensor conditioning, filtering, and communication-stack tasks, while 37 digital I/O pins simplify connections to discrete sensors and actuators. The 48-pin TQFP also offers more routing flexibility than a smaller QFN package, which helps when power, debug, and field-service signals must remain accessible.

💊

Portable Medical Devices

The EFM32ZG222F16-B-QFP48 can support compact medical or wellness devices that need deterministic control, low standby consumption, and a moderate number of external connections. Its 4 KB RAM supports focused data acquisition and state handling, while 16 KB Flash accommodates a compact application rather than a large user interface. The 37 I/O pins can support sensors, indicators, buttons, and a serial host interface, while Stop-mode operation as low as 0.5 µA helps conserve power in intermittent-use products.

🌐

Low-Power Connected Equipment

The EFM32ZG222F16-B-QFP48 fits connected equipment that wakes periodically to exchange information and then returns to a low-power state. The Cortex-M0+ core runs at up to 24 MHz for protocol processing and control, and the EFM32ZG platform provides fast wake-up behavior for reducing inactive time. With 4 KB RAM and 16 KB Flash, the device is best positioned as a secondary controller or compact node rather than the host processor for a graphics-intensive system.

🔧

Compact Embedded Control

The EFM32ZG222F16-B-QFP48 works well as the primary controller in compact products requiring timers, digital control, and embedded logic without a higher-cost application processor. Its two 16-bit timers support periodic events, timing functions, and motor or actuator control, while 37 digital I/O pins reduce the need for external I/O expanders. The 24 MHz processing rate and 16 KB Flash provide a practical balance for focused control firmware, provided the application remains within the device's memory limits.

What is the EFM32ZG222F16-B-QFP48?
The EFM32ZG222F16-B-QFP48 is a 32-bit ARM Cortex-M0+ microcontroller with a 24 MHz maximum clock, 16 KB of Flash, 4 KB of RAM, and 37 digital I/O pins. According to the Silicon Labs EFM32ZG family data sheet, it uses a low-power architecture with autonomous peripherals, energy-saving modes, and fast wake-up behavior. The device is packaged in a 48-pin TQFP measuring 7 mm by 7 mm.
What are the key specifications of EFM32ZG222F16-B-QFP48 that engineers should know?
The EFM32ZG222F16-B-QFP48 combines a 24 MHz ARM Cortex-M0+ core with 16 KB of Flash, 4 KB of RAM, 37 digital I/O pins, and two 16-bit timers. The Silicon Labs EFM32ZG family data sheet identifies low-power operation down to 0.5 µA in Stop mode and 114 µA/MHz in Run mode. Its 48-pin TQFP offers more I/O connectivity than the smaller QFN variants in the same family.
Where can I download the EFM32ZG222F16-B-QFP48 datasheet PDF?
The official EFM32ZG family data sheet is available from Silicon Labs at the datasheet link on this page. It contains the device architecture, electrical characteristics, memory map, peripheral information, and package information for the EFM32ZG222 devices. Use the manufacturer data sheet and the pin-description table when assigning PCB signals, especially for AVDD_x, VDD_DREG, and IOVDD_x connections.
Where can I find the EFM32ZG222F16-B-QFP48 pinout?
The EFM32ZG222F16-B-QFP48 pinout is documented in the pin-definition and package sections of the official Silicon Labs EFM32ZG222 data sheet. Connect the power domains as directed there and in application note AN0002, EFM32 Hardware Design Considerations. Do not infer pin assignments from the 48-pin package alone because several pins serve dedicated supply, ground, reset, debug, and peripheral functions.
Is the EFM32ZG222F16-B-QFP48 suitable for battery-powered devices?
Yes, the EFM32ZG222F16-B-QFP48 is suitable for battery-powered devices because the EFM32ZG family supports low-power operation and fast wake-up from energy-saving states. The family data sheet reports consumption as low as 0.5 µA in Stop mode and 114 µA/MHz in Run mode. Actual battery life depends on the duty cycle, active peripherals, sensor load, and regulator efficiency.
Where to buy EFM32ZG222F16-B-QFP48 online?
Use the Request a Quote form on this page to request the EFM32ZG222F16-B-QFP48, current availability, and order quantity. The form allows buyers to specify packaging and production quantities without relying on a static retail listing. Confirm the exact ordering code, including the -B suffix, before placing a production order.
What is the price of EFM32ZG222F16-B-QFP48?
Current EFM32ZG222F16-B-QFP48 pricing is obtained through the Request a Quote form on this page. Submit the required quantity, packaging preference, and target date to receive an appropriate quotation. The form is the preferred route because component pricing, supply, and lead time can change with order configuration and market conditions.
What is the lead time for EFM32ZG222F16-B-QFP48?
Request the current lead time and minimum order quantity through the Request a Quote form on this page. Lead time depends on the requested quantity, exact package suffix, production schedule, and component availability. Providing the planned build dates and annual usage allows the supplier to quote a schedule that matches the project timeline.
Is EFM32ZG222F16-B-QFP48 in stock?
Check current EFM32ZG222F16-B-QFP48 availability by sending the required quantity through the Request a Quote form on this page. Availability should be confirmed for the exact ordering code because different package, temperature, and shipping variants can have different stocking positions. The quotation response provides the most relevant stock and lead-time information for the proposed order.
What is the best drop-in replacement for EFM32ZG222F16-B-QFP48?
The closest documented same-package replacement is EFM32ZG222F16-QFP48, which retains the 24 MHz Cortex-M0+ core, 16 KB Flash, 4 KB RAM, and 48-pin TQFP configuration. Confirm ordering-code and temperature requirements before substitution. Other EFM32ZG222 members can match the footprint but may reduce Flash capacity, so their suitability depends on firmware size and peripheral requirements.
Can EFM32ZG222F32-QFP48 replace EFM32ZG222F16-B-QFP48?
EFM32ZG222F32-QFP48 can serve as a same-family upgrade when the board can accept a larger Flash-memory option. According to its manufacturer product page, it retains a 24 MHz Cortex-M0+ core, 4 KB RAM, 37 digital I/O pins, two 16-bit timers, and the 48-pin QFP format, while increasing Flash from 16 KB to 32 KB. Verify device-specific pin functions and ordering-code requirements before production substitution.
Can EFM32ZG222F8-QFP48 replace EFM32ZG222F16-B-QFP48?
EFM32ZG222F8-QFP48 is a same-family, same-package option with reduced Flash memory, so it is only suitable when the application firmware fits within the available capacity. Its drop-in use also depends on confirmation of device functions and ordering-code differences. The cross-reference listing identifies it as parametrically similar, but it does not replace a firmware requirement for 16 KB of Flash.
What can replace EFM32ZG222F16-B-QFP48?
The closest documented replacement is EFM32ZG222F16-QFP48 because it preserves the Cortex-M0+ core, 24 MHz clock, 16 KB Flash, 4 KB RAM, 37 I/O pins, and 48-pin TQFP package. If more memory is acceptable, EFM32ZG222F32-QFP48 provides 32 KB of Flash in the same family. Verify the complete ordering code, temperature grade, and pin configuration before substituting either device.
Is EFM32ZG222F16-B-QFP48 the same as EFM32ZG222F16-QFP48?
The two devices share the EFM32ZG222F16 configuration, including a 24 MHz ARM Cortex-M0+ core, 16 KB Flash, 4 KB RAM, 37 digital I/O pins, and a 48-pin TQFP package. Their ordering codes are not interchangeable without checking the suffix definitions and qualification requirements in the manufacturer data sheet. Use the exact ordering code selected for production programming and labeling.
When should I choose EFM32ZG222F16-B-QFP48 over a larger EFM32ZG222 device?
Choose EFM32ZG222F16-B-QFP48 when the firmware fits within 16 KB of Flash, the application requires no more than 4 KB of RAM, and 37 digital I/O pins are sufficient. Choose EFM32ZG222F32-QFP48 when firmware growth requires 32 KB of Flash. Both options use the same family architecture and 48-pin format, but the larger-memory device provides additional software headroom.

Impormasyon ng Talumpati sa Engineering for EFM32ZG222F16-B-QFP48 — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose EFM32ZG222F16-B-QFP48 when a low-power design needs an ARM Cortex-M0+ core running up to 24 MHz, 16 KB of Flash, 4 KB of RAM, and 37 digital I/O pins in a 48-pin TQFP package. Choose EFM32ZG222F16-QFP48 when its ordering suffix matches the product's qualification and sourcing requirements. Choose EFM32ZG222F32-QFP48 when the firmware exceeds 16 KB or future updates require additional memory headroom; it retains the 24 MHz core, 4 KB RAM, and 37 I/O pins. Consider EFM32ZG222F8-QFP48 only for substantially smaller firmware, because its 8 KB of Flash is half the target capacity. Cross-manufacturer 48-pin Cortex-M0+ devices were not listed because a matching package alone does not guarantee pin-compatible power, debug, peripheral, and interrupt assignments.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto EFM32ZG222F16-QFP48 EFM32ZG222F32-QFP48 EFM32ZG222F8-QFP48
Package 48-pin TQFP (7x7) 48-pin TQFP (7x7) 48-pin TQFP (7x7) 48-pin TQFP (7x7)
Brand Silicon Labs Silicon Labs Silicon Labs Silicon Labs
Processor Core ARM Cortex-M0+ ARM Cortex-M0+ ARM Cortex-M0+ ARM Cortex-M0+
Maximum CPU Frequency 24 MHz 24 MHz 24 MHz 24 MHz
Flash Memory 16 KB 16 KB 32 KB 8 KB
RAM Memory 4 KB 4 KB 4 KB Not stated
Digital I/O Pins 37 pins 37 pins 37 pins Not stated
Timer Configuration 2 x 16-bit timers 2 x 16-bit timers 2 x 16-bit timers Not stated
Product Family EFM32 Zero Gecko EFM32 Zero Gecko EFM32 Zero Gecko EFM32 Zero Gecko

Pangunahing mga Pagkakaiba

  • Higher Flash capacity than the reduced-memory same-package option (kumpara saEFM32ZG222F8-QFP48)
  • Lower Flash demand than the higher-memory same-package option (kumpara saEFM32ZG222F32-QFP48)
  • Closest ordering-code match within the documented family (kumpara saEFM32ZG222F16-QFP48)

Talaan ng Disenyo

Connect AVDD_x, VDD_DREG, and IOVDD_x according to the Silicon Labs EFM32ZG222 data sheet and application note AN0002, EFM32 Hardware Design Considerations. Place the required decoupling capacitors directly beside their associated supply and ground pins, and keep the high-current return path short. Check the device's permitted 1.98 V to 3.8 V supply range before designing the regulator and any external analog circuitry.

Route the 24 MHz clock and debug signals away from sensitive analog inputs, and provide the shortest practical ground return between the MCU, decoupling capacitors, and analog sources. The 48-pin TQFP footprint offers additional perimeter access, but that does not remove the need for disciplined topology: place decoupling before branch traces, maintain a continuous ground reference, and review final pin assignments against the package drawing and pin-description table.

Estimated: average Run-mode current at a 24 MHz active clock is 2.736 mA, calculated from the family figure of 114 µA/MHz. This excludes external sensors, communication hardware, and regulator losses. Use this value as an initial active-state budget only, then measure the finished design because peripheral activity and duty cycle can materially change the result.

Do not substitute a lower-Flash member without checking the final linked image size, including startup code, protocol libraries, and update mechanisms. EFM32ZG222F8-QFP48 has 8 KB of Flash versus 16 KB in the target, so apparently minor firmware growth can make a nominal footprint-compatible replacement unusable. Likewise, verify ordering suffixes and temperature requirements before approving any substitution.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

Compliance status requires confirmation against the exact ordering code and current manufacturer declarations.

Kaugnay na Hanapin

EFM32ZG222F16-B-QFP48 datasheet EFM32ZG222F16-B-QFP48 pinout EFM32ZG222F16-B-QFP48 datasheet pdf EFM32ZG222F16-B-QFP48 equivalent EFM32ZG222F16-B-QFP48 replacement EFM32ZG222F16-B-QFP48 cross reference EFM32ZG222F16-B-QFP48 price EFM32ZG222F16-B-QFP48 stock Silicon Labs EFM32ZG222F16-B-QFP48 EFM32ZG222 24MHz 16KB TQFP EFM32ZG222F16-B-QFP48 vs EFM32ZG222F32-QFP48 EFM32ZG222F16-B-QFP48 application circuit

Mga kaugnay na Mga Komponente at mga Tuntunin

Silicon Labs EFM32ZG222F16-B-QFP48 EFM32ZG222F16-QFP48 EFM32ZG222F32-QFP48 EFM32ZG222F8-QFP48 EFM32 Zero Gecko ARM Cortex-M0+ ARM microcontroller MCU embedded processor semiconductor 48-pin TQFP TQFP package family surface mount SMD Flash memory SRAM digital I/O 16-bit timer Stop mode Run mode smart metering industrial sensing battery-powered embedded system
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ