EP3C25U256C7 - 24,624-LE 437.5MHz Cyclone III FPGA | Altera
MPN: EP3C25U256C7 ✓ NakahandaEP3C25U256C7 Ulas
A field-programmable gate array, or FPGA, is a programmable-logic semiconductor whose digital circuits are defined through a configuration bitstream rather than a fixed mask set. Within the device hierarchy, the EP3C25U256C7 belongs to the Cyclone III FPGA family, the logic-device segment of programmable semiconductors. Its 24,624 logic elements provide substantially more configurable logic than small CPLDs, while the 256-LFBGA package supports dense board layouts in communication, control, instrumentation, and embedded-processing systems.
The principal device characteristics include 24,624 logic cells, 156 I/O pins, and 608,256 bits of embedded memory. The reported 437.5 MHz operating frequency provides a useful indication of the device's high-speed logic capability, although final system timing depends on the selected speed grade, design constraints, I/O standards, and external timing paths. The 65 nm fabrication process and 1.2 V supply identify the device as a low-voltage Cyclone III implementation.
The EP3C25U256C7 integrates programmable logic blocks, embedded RAM, dedicated PLL resources, and general-purpose I/O into one device. Its 156 I/O pins can be assigned according to the board-level interface requirements, while its embedded memory supports buffering, packet handling, data acquisition, and control-plane storage. Configuration data establishes the implemented circuit after power-up, allowing one physical board design to support multiple logic configurations and field upgrades.
Typical applications include industrial automation, communications infrastructure, test and measurement, embedded control, and general-purpose digital signal processing. In an industrial controller, the FPGA could combine parallel sensor interfaces, protocol conversion, and real-time control logic. For communications equipment, its 156 I/O and 608,256 bits of memory can support data framing, buffering, and interface management. In instrumentation, multiple parallel channels can be synchronized while programmable logic handles acquisition and preprocessing.
The most important design consideration is that FPGA replacement is not limited to matching package dimensions. A drop-in candidate must also match the voltage configuration, speed grade, temperature grade, configuration scheme, supported I/O standards, and power-supply requirements. The 256-LFBGA package also requires a land pattern capable of supporting its fine-pitch balls, careful power and ground distribution, and thermal-aware PCB layout.
This page consolidates the verified EP3C25U256C7 specifications, distributor pricing, same-family drop-in candidates, and practical selection guidance. It also separates documented values from information that remains unavailable in the supplied source data, allowing engineers to verify every critical design constraint before procurement or schematic approval.
Mga alternatibo na pwedeng ilagay na EP3C25U256C7 — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
EP3C25F256C7
✅ Drop-In ⚠️ Mga Talaan Hindi NaiwerikmoMagkontak para sa presyo
Tingnan ang Datasheet →EP3C25U256C7N
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
EP3C25U256C8N
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
EP3C25U256C8
✅ Drop-In ⚠️ Mga Talaan Hindi NaiwerikmoMagkontak para sa presyo
Tingnan ang Datasheet →EP3C25U256C6
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
EP3C25U256C7 Mga Pinakamataas na Rating at Electrical Characteristics
| Product Type | Cyclone III field-programmable gate array (FPGA) |
| Logic Cells | 24,624 cells |
| Embedded Memory | 608,256 bits |
| Maximum Operating Frequency | 437.5 MHz |
| Logic Elements | 24,624 logic elements |
| I/O Count | 156 I/O |
| Process Technology | 65 nm |
| Core Supply Voltage | 1.2 V |
| Packhaging | 256-LFBGA |
| Package Type | UBGA |
| Uri ng Pagpapasok | Surface mount |
| Device Family | Cyclone III |
| Programmable Logic Type | FPGA |
| Terminal Count | 256 terminals |
Gabay sa Pin Configuration ng EP3C25U256C7 ubga
Pin configuration para sa EP3C25U256C7 (ubga package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa EP3C25U256C7.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
EP3C25U256C7 ay nararapat para sa 6 aplikasyons: Industrial Automation Controller, Communications Interface and Packet Buffer, Data Acquisition and Signal Processing, Test and Measurement Instrumentation, Embedded Control and Sensor Fusion, Video and Display Signal Processing.
Industrial Automation Controller
The Altera EP3C25U256C7 fits industrial automation controllers that require parallel machine interfaces, deterministic control logic, and local data buffering. Its 24,624 logic cells and 608,256 bits of embedded memory provide space for protocol conversion, state machines, counters, and diagnostics, while 156 I/O support sensors, actuators, encoders, and communication transceivers. The device can be placed between an industrial network interface and real-time machine-control logic, allowing one FPGA to consolidate functions that otherwise require several CPLDs and discrete logic. The 437.5 MHz operating-frequency figure provides substantial timing margin for parallel control paths, although final clock rates depend on logic depth and I/O timing. Before deployment, confirm the device's operating-temperature grade, supported I/O standards, configuration method, and 1.2 V power requirements against the factory environment.
Inirekomenda
Communications Interface and Packet Buffer
EP3C25U256C7 is appropriate for communications equipment requiring programmable data framing, channel multiplexing, and packet buffering. The 24,624 logic cells can implement multiple parallel datapaths and protocol state machines, while the 608,256 bits of embedded memory can support FIFO storage, line buffering, and timing compensation. Its 156 I/O provide substantial connectivity for parallel buses, byte-lane interfaces, clocks, and control signals without requiring a large external FIFO. In a bridge or aggregation design, the FPGA can receive framed data, validate headers, perform byte conversion, and transfer information between incompatible interfaces. The verified 437.5 MHz operating frequency supports high-speed parallel processing, but actual line rate and timing margin depend on the selected I/O standards and external components.
Inirekomenda
Data Acquisition and Signal Processing
The EP3C25U256C7 can serve as the central programmable engine in parallel data-acquisition and signal-processing equipment. Its 24,624 logic cells are suitable for digital filtering, decimation, thresholding, channel interleaving, and state-machine control, while 608,256 bits of embedded memory provide local buffering between acquisition and processing stages. The 156 I/O allow simultaneous access to multiple converters, clocks, triggers, and status signals. A practical architecture could capture several converter outputs, align them with a sampling clock, perform real-time filtering, and transfer reduced data to an upstream processor. The verified 437.5 MHz device speed enables demanding parallel logic, but sampling frequency, acquisition bandwidth, and output latency must be derived from the actual pipeline and external converter timing specifications.
Inirekomenda
Test and Measurement Instrumentation
EP3C25U256C7 is well suited to programmable test and measurement logic where multiple channels, precise timing, and flexible analysis functions are required. Its programmable architecture can implement counters, timing generators, pattern engines, digital filters, and interface coordination, while its 24,624 logic cells allow substantial consolidation within a compact instrument. The 608,256 bits of embedded memory can hold calibration tables, acquisition samples, or buffered test vectors. In an automated test system, the FPGA might coordinate instruments, execute a digital test sequence, record results, and expose a simple host interface. The 437.5 MHz operating-frequency figure supports fast timing generation, but users must verify I/O voltage domains, jitter expectations, clock-quality requirements, and timing closure against the selected test standards and board layout.
Inirekomenda
Embedded Control and Sensor Fusion
The Altera EP3C25U256C7 can act as a flexible embedded-control fabric for systems combining sensors, real-time logic, and communications. Its 156 I/O allow direct attachment of encoders, switches, analog-control outputs, and status signals, while 24,624 logic cells can host state machines, fault monitors, filters, and multi-axis control functions. The 608,256 bits of embedded memory provide storage for calibration constants, histories, and command queues without requiring an external memory device for modest workloads. A practical design could synchronize several sensors, derive a combined control value, and transmit results through a network or serial interface. The device's verified 437.5 MHz capability supports real-time processing, but deterministic operation requires appropriate clocking, synchronization, reset design, and verification of the selected temperature and power ratings.
Inirekomenda
Video and Display Signal Processing
EP3C25U256C7 can be used in embedded video timing, pixel formatting, and display-control systems where parallel pixels and timing signals dominate the interface. Its 156 I/O are suitable for parallel RGB, sync, control, and status paths, while the programmable logic can perform timing generation, color-channel reordering, scaling, overlay, or simple pixel processing. The 24,624 logic cells allow multiple pipeline stages to operate concurrently, and the 608,256 bits of embedded memory can provide line buffering or small frame-storage functions. The verified 437.5 MHz operating-frequency figure supports demanding pixel pipelines, although actual video bandwidth and resolution are constrained by I/O count, I/O timing, clocking, and memory bandwidth. The device should be validated against the target display interface, electrical signaling requirements, and source-specific timing constraints.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for EP3C25U256C7 — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | EP3C25F256C7 | EP3C25U256C7N | EP3C25U256C8N | EP3C25U256C8 | EP3C25U256C6 |
|---|---|---|---|---|---|---|
| Package | 256-LFBGA | 256-LFBGA | 256-LFBGA | 256-LFBGA | 256-LFBGA | 256-LFBGA |
| Brand | Altera | Altera | Altera | Altera | Altera | Altera |
| Device Family | Cyclone III | Cyclone III | Cyclone III | Cyclone III | Cyclone III | Cyclone III |
| Logic Cells | 24,624 cells | 24,624 cells | 24,624 cells | 24,624 cells | 24,624 cells | 24,624 cells |
| Embedded Memory | 608,256 bits | 608,256 bits | 608,256 bits | 608,256 bits | 608,256 bits | 608,256 bits |
| I/O Count | 156 I/O | 156 I/O | 156 I/O | 156 I/O | 156 I/O | 156 I/O |
| Core Supply Voltage | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V |
| Process Technology | 65 nm | 65 nm | 65 nm | 65 nm | 65 nm | 65 nm |
Pangunahing mga Pagkakaiba
- Exact verified C7 operating-frequency specification (kumpara saEP3C25U256C8)
- Documented 24,624-cell logic capacity (kumpara saEP3C25F256C7)
- High verified parallel I/O availability (kumpara saEP3C25U256C6)
Talaan ng Disenyo
Treat the 256-LFBGA footprint as a fine-pitch assembly and routing problem rather than a conventional leaded-package layout. Obtain the official package drawing and recommended land pattern, verify ball diameter and pitch, and account for solder-mask definition, paste stencil apertures, via-in-pad use, and component placement tolerances. Because the supplied sources do not include the pin table, do not infer power, ground, configuration, or user I/O balls from the package name; cross-check every connection against the complete manufacturer pinout before release.
Design the 1.2 V core rail as a dedicated, low-noise FPGA supply and follow the device's required power-supply topology. The supplied data confirms a 1.2 V core voltage but does not provide total current, allowable ripple, sequencing, or auxiliary-rail requirements. Determine those values from the complete datasheet and configuration method before selecting regulators or compensation components. Decouple each supply group at the device and preserve the recommended current capability and voltage tolerances.
The 156 I/O pins expose the device to many simultaneous interfaces, so each implemented I/O standard must have a verified voltage, edge-rate, drive-strength, and termination strategy. Pay particular attention to clock inputs, series-terminated outputs, cross-family voltage domains, and external transceiver settling requirements. Use the Quartus design constraints and board-level signal-integrity analysis to control skew and crosstalk; the 437.5 MHz device figure does not by itself guarantee that every external interface will operate at that rate.
Estimate FPGA power from the actual design utilization, toggle rate, I/O load, core voltage, and configured speed grade rather than from the 437.5 MHz maximum alone. The supplied data contains no thermal resistance, junction-temperature limit, or recommended PCB copper area. Pull those values from the official package information and worst-case application notes, then calculate junction rise with the board-specific thermal model. Provide a solid ground-plane structure and adequate copper spreading around the BGA while maintaining the manufacturer's assembly and layout requirements.
Do not approve a substitute solely because it has a 256-ball package or the same 25K family name. FPGA order codes can encode speed grade, temperature grade, voltage option, package, or lead-free status, and even a pin-compatible replacement may require a different configuration bitstream, constraints file, or timing sign-off. Compare the official device tables, validate the pin table and power pins, rerun timing analysis with the exact replacement, and confirm that the generated configuration file and programming algorithm are supported before production substitution.
Impormasyon ng Pagsunod sa Kautusan
The supplied verified search results identify the manufacturer, device, package, logic cells, memory, I/O, frequency, process, and voltage, but do not provide extractable RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations. The comparison search mentions RoHS and REACH attributes without providing conclusive values.
