EPM3064ATC-100-10N - 64-Macrocell MAX 3000A CPLD, 10ns | Altera
MPN: EPM3064ATC-100-10N ✓ NakahandaEPM3064ATC-100-10N Ulas
A CPLD (Complex Programmable Logic Device) is a non-volatile programmable logic IC that combines multiple PAL-like macrocell arrays on a single chip with a programmable interconnect matrix. It sits in the programmable logic hierarchy below FPGAs and above simple SPLDs, providing deterministic timing, fast input-to-output propagation, and instant-on behavior from on-chip EEPROM configuration memory. MAX 3000A devices integrate this architecture with ISP, boundary-scan test, and open-drain or 3.3 V I/O options targeted at glue-logic, bus-interface, and control-plane applications.
Key features include 600 usable gates minimum, 1,250 usable gates typical, two Logic Array Blocks (LABs), 64 macrocells, and 66 user I/O pins. The device supports 3.3 V in-system programmability through JTAG, is JTAG boundary-scan compliant (IEEE 1149.1), and includes 4-pin JTAG programming. The TQFP-100 package offers a compact surface-mount footprint suitable for volume production.
The MAX 3000A architecture is implemented in advanced CMOS EEPROM technology and supports 100% TTL emulation along with SSI/MSI/LSI logic integration. This allows consolidation of multiple discrete logic packages into a single device while preserving deterministic 10 ns propagation delay across all I/O paths, which is essential for synchronous control and bus-interface timing.
Typical applications include bus-interface glue logic, peripheral I/O expansion, address decoding, state-machine controllers, and asynchronous interface bridging between microcontrollers and memory or peripheral buses. The instant-on, non-volatile EEPROM configuration makes it well suited to industrial controllers, automotive body modules, and any system that requires deterministic logic at power-up without firmware load latency.
When designing with the EPM3064ATC-100-10N, ensure the JTAG chain (TCK, TMS, TDI, TDO) is accessible for ISP and that decoupling follows the manufacturer reference design. The 10 ns speed grade offers a balanced trade-off between logic density and timing margin for typical 33-50 MHz control-plane logic.
This page synthesizes distributor pricing, JTAG/ISP design considerations, and drop-in alternative MPNs within the same TQFP-100 footprint - information not aggregated on any single manufacturer or distributor page.
Mga alternatibo na pwedeng ilagay na EPM3064ATC-100-10N — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok EPM3064ATC-100-10N (parehas na form factor at footprint) — pagkakaiba sa Package, In-System Programmability, Operating Temperature, Pin-to-Pin Delay (tPD), RoHS Status.
EPM3064AT100-10N
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →EPM3064ATC-100-7N
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
EPM3064ATC100-10
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →EPM3064ATC100-7N
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →EPM3064ATC100-7
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →EPM3064ALC44-7N
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →EPM3064ATC-100-10N Mga Pinakamataas na Rating at Electrical Characteristics
| Family | MAX 3000A |
| Device Type | CPLD (Complex Programmable Logic Device) |
| Macro Cells | 64 |
| Logic Array Blocks (LABs) | 2 |
| User I/O Pins | 66 |
| Usable Gates (min) | 600 |
| Usable Gates (typical) | 1,250 |
| Pin-to-Pin Delay (tPD) | 10 ns |
| Counter Frequency (fCNT) | 227.3 MHz |
| Supply Voltage (VCCINT) | 3.3 V |
| In-System Programmability | Yes (IEEE 1532 / JTAG 1149.1) |
| Programming Interface | 4-pin JTAG (TCK/TMS/TDI/TDO) |
| Packhaging | TQFP-100 |
| Uri ng Pagpapasok | Surface Mount |
| Temperature na Operasyon | 0C to +70C (commercial) |
| Tindminan RoHS | Compliant |
Gabay sa Pin Configuration ng EPM3064ATC-100-10N tqfp-100
Pin configuration para sa EPM3064ATC-100-10N (tqfp-100 package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa EPM3064ATC-100-10N.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
EPM3064ATC-100-10N ay nararapat para sa 6 aplikasyons: Bus-Interface Glue Logic, Address Decoding & Chip Select Generation, Industrial Control State Machines, Peripheral I/O Expansion & Bridging, Automotive Body Electronics, Test & Measurement Front-End Logic.
Bus-Interface Glue Logic
The EPM3064ATC-100-10N is a strong fit for bus-interface glue logic because it provides 64 macrocells and 66 user I/O pins in a single TQFP-100 device, replacing multiple 74-series logic packages. With a deterministic 10 ns pin-to-pin delay and 227.3 MHz counter frequency, it can implement address-latch, bus-buffer, and chip-select decoding between microcontrollers, memory, and peripherals. ISP via JTAG (IEEE 1149.1 / 1532) lets designers iterate glue-logic without board rework.
Inirekomenda
Address Decoding & Chip Select Generation
The EPM3064ATC-100-10N suits address decoding because its 64 macrocells can implement wide product-term decoders while its 10 ns tPD preserves memory-access timing margins. Using the two Logic Array Blocks (LABs) and on-chip EEPROM configuration, address maps for SRAM, DRAM, Flash, and peripheral banks can be consolidated into one device. The non-volatile instant-on behavior avoids the bus-contention window that FPGAs experience during configuration.
Inirekomenda
Industrial Control State Machines
The EPM3064ATC-100-10N is well matched to industrial control state machines because its 227.3 MHz internal counter speed and 10 ns propagation support fast deterministic sequencing for PLC-style controllers. EEPROM non-volatility preserves state-machine personality without batteries, and the 3.3 V supply aligns with modern MCU rails. JTAG ISP allows field firmware updates via the same boundary-scan chain used in production test.
Inirekomenda
Peripheral I/O Expansion & Bridging
The EPM3064ATC-100-10N bridges MCU-to-peripheral signal mismatches because its 66 user I/Os can level-shift and re-time signals between disparate bus standards while the 10 ns tPD preserves protocol timing. EEPROM-backed configuration means the bridge is functional at the first clock edge, which is critical for systems where the host MCU waits for an external peripheral ready signal. The TQFP-100 footprint supports compact multi-board designs.
Inirekomenda
Automotive Body Electronics
The EPM3064ATC-100-10N is widely deployed in automotive body modules because its non-volatile EEPROM configuration, 10 ns deterministic timing, and 66 I/Os support multiple load-driving and sensor-reading channels in one package. Combined with the MAX 3000A family's proven reliability and JTAG boundary-scan test, body controllers can integrate lamp, lock, mirror, and wiper logic in a single chip. Designers typically select the 7N speed grade for tighter PWM timing margins.
Inirekomenda
Test & Measurement Front-End Logic
The EPM3064ATC-100-10N functions as reconfigurable front-end logic in test and measurement because its JTAG chain (IEEE 1149.1) doubles as both the ISP path and the production boundary-scan test interface, reducing test fixture cost. With 64 macrocells, it can implement pattern generators, multiplexers, and trigger-conditioning networks; the 10 ns tPD handles sub-100 MHz instrumentation timing. Field updates over JTAG extend product life without board rework.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for EPM3064ATC-100-10N — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | EPM3064AT100-10N | EPM3064ATC-100-7N | EPM3064ATC100-10 | EPM3064ATC100-7N | EPM3064ATC100-7 | EPM3064ALC44-7N |
|---|---|---|---|---|---|---|---|
| Brand | Altera | Altera | Altera | Altera | Altera | Altera | Altera |
| Package | TQFP-100 | TQFP-100 - same | TQFP-100 - same | TQFP-100 - same | TQFP-100 - same | TQFP-100 - same | TQFP-100 - same |
| Macro Cells | 64 | 64 | 64 | 64 | 64 | 64 | 64 |
| User I/O Pins | 66 | 66 | 66 | 66 | 66 | 66 | 66 |
| Pin-to-Pin Delay (tPD) | 10 ns | 10 ns | 7.5 ns (faster) | 10 ns | 7.5 ns (faster) | 7.5 ns (faster) | 7.5 ns (faster) |
| Supply Voltage | 3.3 V | 3.3 V | 3.3 V | 3.3 V | 3.3 V | 3.3 V | 3.3 V |
| In-System Programmability | Yes (IEEE 1149.1 / 1532 JTAG) | Yes (IEEE 1149.1 / 1532 JTAG) | Yes (IEEE 1149.1 / 1532 JTAG) | Yes (IEEE 1149.1 / 1532 JTAG) | Yes (IEEE 1149.1 / 1532 JTAG) | Yes (IEEE 1149.1 / 1532 JTAG) | Yes (IEEE 1149.1 / 1532 JTAG) |
| Lead Finish | Lead-free (N suffix) | Lead-free (N suffix) | Lead-free (N suffix) | Tin-lead (no N suffix) | Lead-free (N suffix) | Tin-lead (no N suffix) | Lead-free (N suffix) |
Pangunahing mga Pagkakaiba
- Same TQFP-100 footprint across the entire MAX 3000A 64-macrocell family (kumpara saEPM3064ATC-100-7N)
- 10 ns pin-to-pin delay with 227.3 MHz counter frequency (kumpara saEPM3032ATC44-7N)
- IEEE 1532-compliant ISP across the JTAG chain (kumpara saOlder non-ISP MAX 3000 CPLDs)
Talaan ng Disenyo
Place 0.1 uF decoupling capacitors as close as possible to each VCC pin of the EPM3064ATC-100-10N, with a bulk 10-47 uF tantalum or ceramic on the 3.3 V rail. The TQFP-100 package has multiple VCC/GND pairs distributed across the die; per the MAX 3000A datasheet reference design, each pair requires its own local bypass. Series ferrite beads on the JTAG TCK line can reduce noise injection during ISP.
Do not assume JTAG chain order - if the EPM3064ATC-100-10N shares the JTAG chain with other devices, ensure TDI/TDO are not crossed and that the BSDL file matches the silicon revision. The IEEE 1149.1 TAP state machine must be navigated to Test-Logic-Reset before re-ISP to avoid leaving the device in an undefined state. Always verify the 3.3 V VCC is within +/- 5% before programming, as ISP failure often masks as a power-rail issue.
For high-speed outputs (>50 MHz) on the EPM3064ATC-100-10N, use 22-33 ohm series damping resistors to control ringing on the TQFP-100 bond-wire inductance. Keep clock and JTAG traces short and impedance-controlled to 50 ohms, and avoid running high-edge-rate signals parallel to JTAG TCK/TMS. The 10 ns tPD means a 100 MHz signal can be generated internally, so treat output edges as 1 ns-class transitions for routing purposes.
Impormasyon ng Pagsunod sa Kautusan
Lead-free per N suffix on MPN; commercial operating temperature 0C to +70C. AEC-Q100 qualification not stated in the verified web data - check Intel/Altera product page for automotive-grade ordering codes.