EPM7256SQC208-15N - MAX 7000S CPLD 256 Macrocell | Altera
MPN: EPM7256SQC208-15N ✗ Tapus ng BuhayEPM7256SQC208-15N Ulas
A CPLD (Complex Programmable Logic Device) is a programmable logic IC that combines multiple logic macrocells and a programmable interconnect array on a single die, allowing designers to implement custom combinational and sequential logic without fabricating an ASIC. In the product hierarchy, a CPLD sits between simple PLDs (PAL/GAL) and FPGAs: CPLDs offer deterministic, non-volatile timing and instant-on operation, while FPGAs provide higher logic density. The MAX 7000S family is based on Altera's second-generation MAX architecture, using EEPROM configuration for non-volatile operation.
Key features of the EPM7256SQC208-15N include 256 macrocells, 164 I/O pins, 5 V core operation, and a 15 ns maximum pin-to-pin delay (speed grade -15). The device supports in-system programmability (ISP) via the IEEE 1149.1 JTAG boundary-scan interface, enabling field upgrades without removing the device from the board. Its 208-pin PQFP package provides ample I/O for bus-interface, glue-logic, and state-machine applications.
The MAX 7000S architecture uses a programmable interconnect array (PIA) to route signals between logic array blocks (LABs), each containing 16 macrocells. This architecture delivers predictable timing independent of routing, a critical advantage over SRAM-based FPGAs in deterministic control applications. The EEPROM configuration retains logic after power-down, eliminating external configuration memory.
Typical applications include PCI bus interfaces, ISA-to-PCI bridges, DMA controllers, state machines for industrial automation, and glue logic replacing discrete 74-series TTL. The 164 I/O pins and 256 macrocells make it suitable for medium-complexity designs that would otherwise require dozens of discrete logic packages.
When designing with this device, ensure the 5 V supply is well-decoupled with 0.1 uF ceramic capacitors on every VCC pin, and reserve JTAG pins (TCK, TMS, TDI, TDO) for programming and boundary-scan testing. The 15 ns speed grade limits maximum system clock frequency; for higher-speed designs, consider the -10 or -7 speed grades.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing engineers with a single reference for selection, replacement, and layout decisions.
Mga alternatibo na pwedeng ilagay na EPM7256SQC208-15N — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok EPM7256SQC208-15N (parehas na form factor at footprint) — pagkakaiba sa Package, RoHS Status, Speed Grade, Operating Temperature, Operating Temperature Range.
EPM7256SQC208-10
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →EPM7256SQC208-7
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →EPM7256SQC208-15
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →EPM7256BQC208-7
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →EPM7256AQC208-7
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →EPM7256SQC208-15N Mga Pinakamataas na Rating at Electrical Characteristics
| Series | MAX 7000S |
| Macrocells | 256 |
| User I/O Pins | 164 |
| Pin-to-Pin Delay | 15 ns (speed grade -15) |
| Volte ng Pagbibigay | 5 V |
| Packhaging | 208-pin PQFP |
| Uri ng Pagpapasok | Surface Mount |
| Configuration Memory | EEPROM (non-volatile) |
| JTAG Interface | IEEE 1149.1 boundary-scan |
| In-System Programmability | Yes (ISP) |
| Tindminan RoHS | Lead free / RoHS Compliant |
| Logic Array Blocks | 16 macrocells per LAB |
| Interconnect | Programmable Interconnect Array (PIA) |
| Speed Grade | -15 |
| Product Category | CPLD - Complex Programmable Logic Devices |
| Manufacturer | Altera (Intel Programmable Solutions Group) |
Gabay sa Pin Configuration ng EPM7256SQC208-15N 208-pin pqfp
Pin configuration para sa EPM7256SQC208-15N (208-pin pqfp package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa EPM7256SQC208-15N.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
EPM7256SQC208-15N ay nararapat para sa 6 aplikasyons: PCI Bus Interface, Industrial Automation State Machine, Glue Logic Replacement, DMA Controller, Legacy System Maintenance, Telecom Line Card Control.
PCI Bus Interface
The EPM7256SQC208-15N fits PCI bus interface designs because its 256 macrocells and 164 I/O pins provide sufficient logic and I/O for PCI target and master controllers, while its 15 ns pin-to-pin delay supports the 33 MHz PCI clock with margin. The 5 V supply matches legacy PCI signaling levels. In a typical implementation, the CPLD implements address decoding, wait-state generation, and configuration-space registers between the PCI bus and a local peripheral. Unlike an SRAM-based FPGA, the MAX 7000S EEPROM configuration is instant-on, so the PCI interface is ready before the host completes enumeration. The trade-off is lower logic density than an FPGA, but deterministic timing and no external configuration memory simplify board design.
Inirekomenda
Industrial Automation State Machine
The EPM7256SQC208-15N is well suited to industrial automation state machines because its 256 macrocells can implement complex sequential logic with deterministic 15 ns timing, and its 164 I/O pins interface directly with sensors, relays, and motor drivers. The 5 V supply is compatible with legacy industrial I/O levels, and the EEPROM configuration retains the state machine logic through power cycles without a configuration PROM. In a typical design, the CPLD implements a multi-state controller for a packaging or assembly line, replacing dozens of discrete 74-series logic packages. The non-volatile, instant-on operation is critical in factory environments where boot time and reliability matter. The trade-off versus an FPGA is lower logic capacity, but the CPLD's predictable timing simplifies safety validation.
Inirekomenda
Glue Logic Replacement
The EPM7256SQC208-15N replaces dozens of discrete 74-series TTL glue-logic packages in a single 208-pin PQFP, reducing board area and power. Its 256 macrocells and 164 I/O pins can absorb address decoding, bus arbitration, clock gating, and reset sequencing functions that would otherwise require multiple SSI/MSI devices. The 15 ns pin-to-pin delay is comparable to or faster than discrete TTL propagation delays, so system timing is preserved. The 5 V supply matches legacy TTL levels, and the EEPROM configuration eliminates the need for configuration memory. In a typical design, the CPLD consolidates a board's glue logic, improving reliability by reducing solder joints and component count. The trade-off is that the CPLD requires programming during manufacturing, adding a JTAG step.
Inirekomenda
DMA Controller
The EPM7256SQC208-15N can implement a multi-channel DMA controller because its 256 macrocells provide enough registers and counters for address generation, transfer counting, and bus arbitration, while its 164 I/O pins interface with memory and peripheral buses. The 15 ns pin-to-pin delay supports legacy bus speeds up to approximately 33 MHz. The 5 V supply matches ISA and other legacy bus signaling. In a typical design, the CPLD implements DMA channels for a data-acquisition system, moving samples from an ADC to memory without CPU intervention. The EEPROM configuration ensures the DMA controller is active immediately at power-up, which is important for systems that must begin acquisition before software initialization completes. The trade-off versus an ASIC is lower performance but far lower NRE cost.
Inirekomenda
Legacy System Maintenance
The EPM7256SQC208-15N is a critical part for maintaining legacy systems because it is the exact CPLD used in many 1990s and 2000s industrial, telecom, and medical designs. When a legacy board fails, replacing the EPM7256SQC208-15N with an identical part preserves the original timing and functionality without requalification. Its 256 macrocells, 164 I/O pins, and 208-pin PQFP footprint match the original design, and the 15 ns speed grade matches the original timing budget. Because the MAX 7000S family is obsolete, sourcing genuine parts is the primary challenge. Drop-in alternatives such as the EPM7256SQC208-10 can extend system life when the exact -15 grade is unavailable, provided timing margins allow.
Inirekomenda
Telecom Line Card Control
The EPM7256SQC208-15N fits telecom line card control because its 256 macrocells can implement per-channel control logic, alarm monitoring, and bus interfacing, while its 164 I/O pins connect to multiple line interfaces and a backplane bus. The 15 ns pin-to-pin delay supports the control-plane timing of legacy telecom equipment, and the 5 V supply matches the line card's power rails. In a typical design, the CPLD manages channel activation, loopback testing, and fault reporting for a T1/E1 or SONET line card. The EEPROM configuration ensures the line card controller is operational immediately at power-up, which is required for telecom equipment that must restore service quickly after a power event. The trade-off versus an FPGA is lower logic density, but the CPLD's deterministic timing aids compliance testing.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for EPM7256SQC208-15N — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | EPM7256SQC208-10 | EPM7256SQC208-7 | EPM7256SQC208-15 | EPM7256BQC208-7 | EPM7256AQC208-7 |
|---|---|---|---|---|---|---|
| Package | 208-pin PQFP | 208-pin PQFP - same | 208-pin PQFP - same | 208-pin PQFP - same | 208-pin PQFP - same | 208-pin PQFP - same |
| Brand | Altera | Altera | Altera | Altera | Altera | Altera |
| Macrocells | 256 | 256 | 256 | 256 | 256 | 256 |
| User I/O Pins | 164 | 164 | 164 | 164 | 164 | 164 |
| Pin-to-Pin Delay | 15 ns | 10 ns | 7.5 ns | 15 ns | 7 ns | 7 ns |
| Supply Voltage | 5 V | 5 V | 5 V | 5 V | 5 V | 5 V |
| Configuration Memory | EEPROM (non-volatile) | EEPROM (non-volatile) | EEPROM (non-volatile) | EEPROM (non-volatile) | EEPROM (non-volatile) | EEPROM (non-volatile) |
| JTAG ISP | Yes (IEEE 1149.1) | Yes (IEEE 1149.1) | Yes (IEEE 1149.1) | Yes (IEEE 1149.1) | Yes (IEEE 1149.1) | Yes (IEEE 1149.1) |
| Lifecycle Status | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete |
Pangunahing mga Pagkakaiba
- Non-volatile EEPROM configuration (kumpara saSRAM-based FPGAs)
- Deterministic 15 ns pin-to-pin timing (kumpara saEPM7256SQC208-10)
- Lead-free RoHS-compliant package (kumpara saEPM7256SQC208-15)
- High I/O count in a single package (kumpara saDiscrete 74-series logic)
Talaan ng Disenyo
Decouple every VCC pin of the EPM7256SQC208-15N with a 0.1 uF ceramic capacitor placed as close to the pin as possible, plus at least one 10 uF bulk capacitor per power plane. The MAX 7000S architecture switches many macrocells simultaneously, causing transient current spikes; inadequate decoupling leads to ground bounce and logic errors. Estimated: at 5 V and a typical 100 mA dynamic current, a 0.1 uF capacitor supplies charge for approximately 2 ns of switching before the bulk capacitor responds. Use a low-inductance ground plane and avoid daisy-chaining power traces between pins.
Route the JTAG signals (TCK, TMS, TDI, TDO) as short, controlled-impedance traces and keep them away from high-speed clock and I/O signals to avoid programming failures. Terminate TCK with a series resistor if reflections are observed. Place the JTAG header close to the CPLD to minimize stub length. For the 208-pin PQFP, use a thermal pad and sufficient copper area under the device to spread heat, although power dissipation is typically low. Follow the manufacturer's recommended land pattern to ensure solder-joint reliability.
Do not assume the EPM7256SQC208-15N is still in production - the MAX 7000S family is obsolete, so verify authenticity and date codes when sourcing. Counterfeit or re-marked parts are common for obsolete CPLDs. Also, the 'N' suffix denotes lead-free packaging; mixing leaded and lead-free parts on the same board can cause solder-joint reliability issues. Finally, the 15 ns speed grade limits maximum clock frequency; if your design was migrated from a faster grade, re-verify timing closure with the slower part.
Impormasyon ng Pagsunod sa Kautusan
Micro-Semiconductor lists the EPM7256SQC208-15N as 'Lead free / RoHS Compliant'. REACH, halogen-free, and conflict-minerals status were not found in the provided data.