ICL7135CPIZ - 4.5-Digit BCD ADC | Renesas Electronics
MPN: ICL7135CPIZ ✓ NakahandaICL7135CPIZ Ulas
A dual-slope integrating ADC is a mixed-signal data-conversion device that averages an input over controlled integration periods to suppress constant noise and reject unwanted frequencies. Within the broader hierarchy of analog-to-digital converters, data converters, and semiconductor signal-chain devices, the ICL7135 family is intended for digital-panel meters, digital voltmeters, laboratory instruments, weighing systems, and other equipment that must present a stable decimal result while also driving a multidigit display.
The ICL7135CPIZ includes four digit-drive outputs for multiplexed display operation and multiplexed BCD outputs for external decoding or digital processing. Its dual-slope conversion method is suited to slowly changing measurements because it offers good noise rejection without the complexity and switching noise of a high-frequency successive-approximation converter. The 4.5-digit architecture permits a negative 1-digit range for zero and overload indication in many panel-meter implementations.
The converter's differential input arrangement supports source impedance balancing and rejection of common-mode signals when the analog front end is designed correctly. With a 2.0000 V full-scale range, the 4.5-digit resolution corresponds to approximately 100 microvolts per count. This relationship makes the device suitable for precision measurement of voltage, resistance derived through a reference divider, temperature through a linearized sensor network, and other slowly varying quantities.
Typical uses include laboratory digital voltmeters, industrial panel meters, laboratory balances, process-monitoring instruments, and test equipment with decimal LED or LCD readouts. The integrated digit drivers simplify displays containing multiple digits, while the BCD interface allows the measurement result to be captured by a controller when an instrument also requires remote monitoring or data logging.
PCB design should preserve the high-impedance analog input path, provide a clean reference connection, and route display-driver and converter outputs away from sensitive input and reference nodes. Component tolerances, reference stability, input leakage, and grounding determine whether the converter's nominal resolution is realized in the finished instrument. The manufacturer datasheet should be used to assign every physical pin and implement the recommended input, reference, and bypass networks.
This page combines the converter's core architecture, package and interface characteristics, engineering guidance, comparison points, and practical application context. It is intended to support design selection and board planning rather than replace the manufacturer datasheet, reference schematic, or final qualification testing.
Mga alternatibo na pwedeng ilagay na ICL7135CPIZ — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok ICL7135CPIZ (parehas na form factor at footprint) — pagkakaiba sa Output Format, Conversion Accuracy, Converter Type, Input Architecture, Package.
ICL7135CPI+
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →MAX1497EPI+
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
ICL7135CPIZ Mga Pinakamataas na Rating at Electrical Characteristics
| Converter Type | Dual-slope integrating ADC |
| Pangangasiwaan | 4.5 digits |
| Output Format | Multiplexed BCD |
| Accuracy | ±1 count in 20,000 |
| Full-Scale Voltage | 2.0000 V |
| Nominal Resolution | 100 uV per count |
| Input Architecture | High-impedance differential input |
| Conversion Rate | Approximately 2 samples per second |
| Display Driver Outputs | 4 digit-drive outputs |
| BCD Output Signals | Multiplexed B1, B2, B4, and B8 outputs |
| Package Type | 28-pin PDIP |
| Bilang ng Pin | 28 pins |
| Style ng Pagpapasok | Through-hole |
| Product Type | Display-driver precision ADC |
Gabay sa Pin Configuration ng ICL7135CPIZ 28-pin pdip
Pin configuration para sa ICL7135CPIZ (28-pin pdip package). Ang analog component na ito ay may input, output, at power supply pins. Sumangguni sa datasheet ng manufacturer para sa offset null, compensation, at enable pin configurations. Perpekto para sa signal conditioning at amplifier circuits.
Wala ng detalyadong pinout data na magagamit para sa ICL7135CPIZ.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
ICL7135CPIZ ay nararapat para sa 6 aplikasyons: Digital Voltmeter, Industrial Panel Meter, Laboratory Measurement Instrument, Laboratory Balance Display, Process Monitoring Display, Temperature Measurement Panel.
Digital Voltmeter
The ICL7135CPIZ fits a digital voltmeter because its 4.5-digit dual-slope architecture provides ±1 count in 20,000 accuracy across a 2.0000 V full-scale range, equivalent to approximately 100 microvolts per count. The converter operates at about 2 samples per second, which favors a stable display over rapid sampling. Its four digit-drive outputs can operate a multiplexed numeric display, while the BCD outputs provide a path to remote data capture. A precision reference and balanced high-impedance differential input network remain essential for accurate results.
Inirekomenda
Industrial Panel Meter
For an industrial panel meter, the ICL7135CPIZ combines a 4.5-digit measurement format with integrated drivers for a multidigit display, reducing the need for separate display-driver circuitry. Its approximately 2 samples per second conversion rate is appropriate for temperature, pressure, load-cell, and process signals that change gradually. The ±1 count in 20,000 accuracy specification supports readable panel resolution, while the 2.0000 V full-scale range can be scaled by a precision input divider or front-end network.
Inirekomenda
Laboratory Measurement Instrument
The ICL7135CPIZ is appropriate for laboratory instruments that emphasize stable decimal readings, low update rates, and direct display interfacing. Its dual-slope conversion method integrates the input over controlled periods, which helps reject periodic interference in measurement environments. A 4.5-digit result, 100-microvolt nominal count value, and ±1 count in 20,000 accuracy support precision laboratory voltage measurements. Designers should use low-leakage input components and a stable reference because those external factors can dominate the complete instrument's error budget.
Inirekomenda
Laboratory Balance Display
A laboratory balance can use the ICL7135CPIZ when weight is converted into a slowly changing analog voltage and displayed with four digits plus an overflow indication. The approximately 2 samples per second update rate is useful because most mechanical or electronic scales do not require continuous high-rate sampling. The 4.5-digit format and ±1 count in 20,000 stated accuracy provide a suitable display framework. Reference stability, input leakage, excitation layout, and grounding should be controlled separately to preserve the useful resolution of the converter.
Inirekomenda
Process Monitoring Display
For process monitoring, the ICL7135CPIZ can acquire a slowly varying process voltage and present it directly through its multiplexed display outputs. The dual-slope architecture is well matched to signals affected by periodic noise because the integration process rejects unwanted periodic components. With a 2.0000 V full-scale range and approximately 2 samples per second, the device suits panel displays rather than waveform analysis. A protected input network should isolate field wiring from the converter's high-impedance measurement inputs.
Inirekomenda
Temperature Measurement Panel
The ICL7135CPIZ can form the measurement core of a temperature display when a linearized sensor or resistive bridge produces a voltage within the usable input range. Its 4.5-digit readout structure is useful for showing fractional temperature values, while the approximately 2 samples per second conversion rate provides continuously refreshed readings without excessive conversion activity. The dual-slope method helps suppress periodic interference. Sensor excitation, reference stability, and differential-input balance determine whether the displayed resolution reflects actual temperature accuracy.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for ICL7135CPIZ — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | ICL7135CPI | MAX1497EPI+ |
|---|---|---|---|
| Brand | Renesas Electronics | Renesas Electronics | Analog Devices |
| Package | 28-pin PDIP | 28-pin PDIP | 28-pin PDIP |
Pangunahing mga Pagkakaiba
- Integrated display-driver outputs (kumpara saMAX1497EPI+)
- Defined precision and resolution (kumpara saMAX1497EPI+)
- Directly integrated decimal-display interface (kumpara saMAX1497EPI+)
- Same-family Renesas sourcing path (kumpara saMAX1497EPI+)
Talaan ng Disenyo
Keep the high-impedance input and reference nets short, clean, and away from the digit-drive outputs. Use a guarded or properly shielded analog input arrangement when nearby switching nodes or display lines could couple into the measurement channel. The input network should also preserve differential balance. Small, high-leakage-rejection components near the converter are generally preferable to long unprotected traces or breadboard-style interconnections in a precision measurement design.
Do not treat nominal 4.5-digit resolution as complete instrument accuracy. Reference drift, resistor tolerance, input offset, leakage, source impedance, and grounding can reduce real-world accuracy even when the converter meets its stated ±1 count in 20,000 specification. Start from the manufacturer's reference circuit, calculate the uncertainty of every external component, and test across temperature before claiming the displayed least-significant digit is meaningful.
Follow the manufacturer-recommended bypass and decoupling arrangement directly at the supply and reference pins. Separate sensitive reference routing from display-driver return currents, and provide adequate return paths so display transitions do not modulate the measurement reference. Check supply limits and sequencing requirements against the exact ICL7135CPIZ grade before connecting the 28-pin PDIP device to the board.
Impormasyon ng Pagsunod sa Kautusan
Material-compliance declarations and automotive qualification were not established for the exact ordering code. AEC-Q100 is treated as not applicable because the product is a general-purpose precision ADC rather than an explicitly automotive-qualified device.