Renesas Electronics

ICS525R-02 - 250MHz Configurable Clock Generator | Renesas

MPN: ICS525R-02 ✓ Nakahanda
28-pin SSOP Package 250 MHz Speed
MOQ: 1 |

ICS525R-02 Ulas

Renesas Electronics ICS525R-02 is a user-configurable clock generator and fanout distribution IC operating to 250 MHz and packaged in a 28-pin SSOP. The device accepts a crystal or clock input and uses a phase-locked loop to generate configurable high-frequency clock outputs, providing a compact clock-tree solution for digital systems that require multiple related frequencies from one reference.

A configurable clock generator is a timing IC that combines a phase-locked loop, programmable frequency synthesis, and output distribution. In the product hierarchy, it belongs to clock and timing ICs and provides a bridge between a stable crystal or external reference and multiple clock domains. The OSCaR family is specifically designed to replace conventional crystal-oscillator arrangements in systems that need programmable frequency selection rather than one fixed output frequency.

The ICS525R-02 supports a maximum output frequency of 250 MHz and includes PLL bypass functionality. Its user-configurable architecture permits engineers to select operating combinations of the voltage-controlled oscillator, reference frequency, and output dividers. The 28-pin SSOP has a 0.154-inch, 3.90 mm body width and integrates clock generation, fanout distribution, and programmable divider resources into one package.

The PLL-based architecture provides a practical alternative to designing a fixed-frequency oscillator and separate divider or buffer networks. Bypass operation allows the device to be evaluated and integrated with an external clock path, while PLL operation supports synthesized outputs from a crystal or clock source. Exact divider ratios, VCO limits, jitter, output levels, and recommended crystal parameters should be selected using the configuration tables in the manufacturer datasheet.

Typical uses include network-interface clock distribution, processor and FPGA clock trees, telecommunications timing, digital test equipment, and industrial control systems. The device is especially useful where several logic domains must be related to one frequency reference but cannot all use a simple fixed crystal oscillator. Short traces, terminated clock routing, and careful separation from high-speed data paths remain essential at the upper operating frequency.

For implementation, evaluate every possible VCO, reference, and output-divider combination before committing to the PCB. Confirm the selected output frequency, duty-cycle tolerance, jitter requirement, crystal load capacitance, and I/O voltage against the manufacturer configuration guide. The SSOP footprint also requires assembly planning for its 0.154-inch body width and adequate lead-clearance spacing.

This product record combines the device function, verified 250 MHz operating point, package information, configuration guidance, and practical replacement considerations. It is intended to help engineers identify whether the ICS525R-02 matches the required clock architecture before moving to a detailed design review.

Mga alternatibo na pwedeng ilagay na ICS525R-02 — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

Variante sa Seri na ito

Katulad na modelo sa serye na katugma sa pagpasok ICS525R-02 (parehas na form factor at footprint) — pagkakaiba sa Device Type, Package Body Width.

Renesas Electronics
Device Type: User-configurable clock generator
Package Body Width: 3.90 mm
Ikabit sa ICS525R-02 →

ICS525R-01

✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo
📦 28-pin SSOP
Maximum output frequency is lower than the ICS525R-02 by 50 MHz, and the output-divider configuration differs by one documented family configuration set.

📋 Alternatibo na Reference (hindi sa katalogo)

ICS525R-03

✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo
📦 28-pin SSOP
Input interface changes by one functional option from the ICS525R-02 configuration, while the maximum output frequency remains 250 MHz and the 28-pin SSOP footprint is retained.

📋 Alternatibo na Reference (hindi sa katalogo)

ICS525R-11

✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo
Renesas Electronics
📦 28-pin SSOP
User-configurable clock generator · Integrated Circuit Systems, now Renesas Electronics · 40 MHz · Differential PECL clock output · CMOS · 3 V to 5.5 V · 4.5 V to 5.5 V · 28-pin SSOP

Magkontak para sa presyo

Tingnan ang Datasheet →

ICS525R-12

✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo
📦 28-pin SSOP
Output-divider configuration differs by one alternative divider set from the ICS525R-02, while the 250 MHz maximum output and 28-pin SSOP format are retained.

📋 Alternatibo na Reference (hindi sa katalogo)

ICS525R-02 Mga Spesipikasyon

Device Type Clock generator and fanout distribution IC
Product Family OSCaR user-configurable clock
Maximum Output Frequency 250 MHz
Bilang ng Outputs 1
PLL Yes, with bypass
Input Sources Clock or crystal
Type ng Output CMOS
Packhaging 28-pin SSOP
Package Body Width 3.90 mm (0.154 inch)
Uri ng Pagpapasok Surface mount

Gabay sa Pin Configuration ng ICS525R-02 3.90 mm (0.154 inch)

Pin configuration para sa ICS525R-02 (3.90 mm (0.154 inch) package). Ang pagnunumero ng pin, mga function, at connection diagram ay tinukoy sa datasheet ng manufacturer. Sumangguni dito para sa eksaktong footprint at mga alituntunin sa soldering.

Pinout diagram ng 3.90 mm (0.154 inch) package para sa ICS525R-02

Wala ng detalyadong pinout data na magagamit para sa ICS525R-02.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

ICS525R-02 ay nararapat para sa 6 aplikasyons: FPGA Clock Distribution, Network Interface Timing, Telecommunications Clock Tree, Digital Test and Measurement, Industrial Control Systems, High-Speed Data Conversion.

🖥️

FPGA Clock Distribution

The ICS525R-02 fits FPGA designs that require one programmable reference to support several related clock domains. Its PLL-based architecture, configurable VCO path, output-divider selections, and 250 MHz maximum output provide flexibility beyond a fixed crystal oscillator. The device can be placed near the FPGA clock input so the reference and distributed clock experience controlled PCB routing. Designers must select a valid reference, VCO, and divider combination, then verify the resulting frequency against the FPGA clock specification. Output jitter, duty-cycle tolerance, I/O voltage, and maximum operating frequency should be checked for the selected clock role before release to layout.

🌐

Network Interface Timing

The ICS525R-02 is appropriate for network-interface timing where a stable reference must be converted into a selectable high-speed clock. Its 250 MHz maximum output provides headroom for Ethernet, serial-interface, and data-conversion clock trees, while the programmable architecture permits different operating modes to share one clock-generation design. The implementation should keep the crystal or reference path short, use the manufacturer-recommended load network, and route the clock as a controlled transmission line when edge rates are high. Confirm the selected output frequency, jitter requirement, supply level, and fanout loading before assigning outputs to multiple communication blocks.

🌐

Telecommunications Clock Tree

The ICS525R-02 supports telecommunications systems that need selectable clock outputs derived from one reference. The PLL, fanout distribution, and programmable divider resources allow clock frequencies to be adapted across line-card operating modes without moving to a separate fixed oscillator for every frequency. At 250 MHz maximum output, PCB signal-integrity practices become important: use a continuous reference plane, avoid splits beneath the device, control clock trace impedance, and minimize stubbing. The final frequency plan must be checked against the permitted VCO and divider ranges, while jitter and duty-cycle requirements should be evaluated for the specific interface clock.

🔧

Digital Test and Measurement

The ICS525R-02 can support test and measurement equipment that synthesizes selectable timing signals from a crystal reference. Its programmable clock architecture is useful when the same instrument must exercise several bus rates, ADC clocks, or ADC/DAC sampling interfaces. The 28-pin SSOP integrates generation and distribution, allowing reference, feedback, programming, and output routing to be planned in one controlled area. Engineers should calculate every divider relationship before schematic capture, use the documented reference configuration, and verify jitter at the output rather than inferring it solely from the 250 MHz maximum frequency. Probe loading and cable-driver behavior should also be considered.

🏭

Industrial Control Systems

The ICS525R-02 fits industrial control systems requiring programmable clock generation for processors, data converters, and communication transceivers. A single reference can support several operating frequencies, reducing the number of discrete oscillator and divider blocks when the system architecture allows it. The device should be positioned near the reference source and sensitive digital loads, with a solid ground plane and short feedback routing. Industrial designs must confirm operating-temperature limits, supply tolerances, and output timing margins before production. The manufacturer configuration tables should be used to ensure every synthesized frequency remains valid under startup, reset, and temperature extremes.

📡

High-Speed Data Conversion

The ICS525R-02 can generate clocks for high-speed ADC and DAC subsystems when those converters require a programmable sampling frequency derived from a stable source. The PLL and selectable divider paths support clock planning across multiple conversion rates, while the 250 MHz maximum output covers high-speed conversion-clock requirements. Place the generator near the converter clock inputs, maintain short return paths, and use matched routing for differential or complementary clock arrangements. Before implementation, verify output standard, voltage, jitter, duty-cycle distortion, and valid divider combinations. The clock should also be considered when evaluating converter aperture timing and system synchronization.

Buod ng mga Inirekomendang Produkto

ICS525R-02I Industrial-order-code version of the configurable clock Ginagamit sa: FPGA Clock Distribution, Network Interface Timing, Telecommunications Clock Tree, Digital Test and Measurement, Industrial Control Systems, High-Speed Data Conversion ICS525R-02T Commercial-order-code version of the configurable clock Ginagamit sa: FPGA Clock Distribution, Network Interface Timing, Telecommunications Clock Tree, Digital Test and Measurement, Industrial Control Systems, High-Speed Data Conversion
What is the ICS525R-02 used for?
The ICS525R-02 is a user-configurable clock generator and fanout distribution IC used to create one or more clock outputs from a crystal or external clock reference. According to the Renesas Electronics manufacturer datasheet, its OSCaR architecture combines a PLL, programmable VCO selection, and output dividers in a 28-pin SSOP. The device reaches a maximum output frequency of 250 MHz and includes PLL bypass, making it suitable for programmable clock trees, processor and FPGA timing, telecommunications, and test equipment.
What is the maximum output frequency of the ICS525R-02?
The ICS525R-02 operates to a maximum output frequency of 250 MHz. The manufacturer datasheet identifies it as an OSCaR user-configurable clock that can use either a crystal or clock input and includes a PLL with bypass. The 250 MHz figure is the device’s headline operating point, but the selected reference, VCO, and divider combination must remain within the valid configuration table before the resulting output is guaranteed.
Where can I download the ICS525R-02 datasheet PDF?
The ICS525R-02 datasheet is available from the Renesas Electronics document page for the 525-01/02 family. Use the pin-description, electrical-characteristics, and configuration tables to assign every package connection and select a valid VCO, reference, and output-divider combination. The document also explains that the 525-02 has a higher maximum output frequency and a different output-divider set than the 525-01, making direct configuration-table comparison essential.
Where can I find the ICS525R-02 pinout?
The ICS525R-02 pinout is documented in the pin-description section of the Renesas Electronics 525-01/02 manufacturer datasheet. The component uses a 28-pin SSOP with a 0.154-inch, 3.90 mm body width. Use the package drawing and pin table together when assigning reference, feedback, configuration, ground, and clock-output nets; do not infer function from the similar ICS525R-02I and ICS525R-02T order codes.
Is the ICS525R-02 a drop-in replacement for a crystal oscillator?
The ICS525R-02 can replace a fixed crystal oscillator when the surrounding circuit accepts an active clock output and the required frequency is available from its programmable VCO and divider combinations. The manufacturer describes the OSCaR family as designed to replace crystal oscillators in many systems. It is not a physical two-pin substitute: the device requires a 28-pin SSOP footprint and a suitable clock-generation circuit, so the PCB and external components must be redesigned.
What is the difference between ICS525R-02 and ICS525R-01?
The principal documented difference is maximum output frequency and divider configuration. The Renesas Electronics manufacturer datasheet states that the 525-02 has a higher maximum output frequency and a slightly different set of output dividers than the 525-01. The ICS525R-02 reaches 250 MHz, while the ICS525R-01 operates at a lower maximum frequency. Both are 28-pin SSOP devices, but the frequency and divider tables must be checked before treating one as a substitute.
When should I choose the ICS525R-02 instead of a fixed-frequency oscillator?
Choose the ICS525R-02 when a design requires programmable frequency selection, multiple related clock outputs, or one clock-generation block that can cover several operating modes. Its PLL, selectable VCO and divider paths, and 250 MHz maximum output provide more flexibility than a fixed-frequency crystal oscillator. For a single permanent frequency with minimal circuitry and the lowest possible bill of materials, a discrete crystal oscillator may remain the simpler choice.
What is the best drop-in replacement for the ICS525R-02?
The closest documented alternatives are same-family Renesas OSCaR devices in the 28-pin SSOP footprint, but the available cross-reference information does not establish five fully interchangeable production choices. The ICS525R-01 changes the maximum-frequency and divider configuration, while ICS525R-03, ICS525R-11, and ICS525R-12 alter specific input or divider functions. Request a quote on this page for current sourcing support, and validate timing, pin behavior, voltage, and divider tables against the manufacturer datasheet before substitution.
Can ICS525R-03 replace ICS525R-02?
The ICS525R-03 may share the 28-pin SSOP OSCaR family format, but it should not be treated as an automatic substitute because the input interface differs: the ICS525R-03 is identified as a PECL-input configurable clock, while the ICS525R-02 is the 250 MHz user-configurable device listed for the 525-01/02 family. Confirm input levels, pin functions, reference requirements, divider programming, and output timing on the manufacturer datasheet before considering a board change.
Is the ICS525R-02 suitable for FPGA and processor clock trees?
The ICS525R-02 is suitable for FPGA and processor clock trees when the required frequencies fall within its valid VCO and output-divider combinations. Its maximum output frequency is 250 MHz, and its fanout function is intended to distribute a generated clock through a controlled timing IC. The design must account for input/output voltage, clock jitter, duty-cycle limits, trace impedance, and the device-specific configuration table rather than treating the maximum frequency as universally usable.
How do I select the crystal and capacitors for the ICS525R-02?
Select the crystal and load capacitors by following the reference configuration table in the Renesas Electronics 525-01/02 manufacturer datasheet. The crystal frequency, load capacitance, drive level, and selected PLL configuration must satisfy the device’s operating conditions. The general design sequence is to choose the target output, identify a valid VCO and divider combination, calculate the required reference relationship, then confirm crystal load capacitance and supported input frequency before layout.
Where can I buy the ICS525R-02 and what is its price?
Use the Request a Quote form on this page to request the current ICS525R-02 price, stock status, minimum order quantity, and delivery schedule. Because availability and commercial terms can change by order configuration and date, the platform’s current quotation workflow should be used instead of a static price statement. The exact ICS525R-02 ordering information should also be confirmed against the manufacturer documentation before production release.
What is the lead time for the ICS525R-02?
The current lead time for the ICS525R-02 should be requested through the Request a Quote form on this page, including the required quantity and shipment destination. Lead time depends on current inventory, order quantity, and sourcing status, and it should not be inferred from a listing for a related order code such as ICS525R-02I or ICS525R-02T. The manufacturer’s exact MPN and package configuration must remain unchanged when requesting supply.
Is the ICS525R-02 in stock?
Current stock for the exact ICS525R-02 should be confirmed through the Request a Quote form on this page. Inventory listings for related order codes do not guarantee availability of the base MPN. Include the required quantity, target delivery date, and shipment location in the request so the quotation can reflect the correct configuration and scheduling information.
What are the key specifications of the ICS525R-02?
The ICS525R-02 is a 28-pin SSOP clock generator and fanout distribution IC with a maximum output frequency of 250 MHz, one listed output, CMOS output technology, and PLL operation with bypass. It accepts clock or crystal input and provides programmable VCO and output-divider configuration. The family is intended as a higher-frequency alternative to the 525-01, so engineers should check the exact divider set, voltage, jitter, and reference requirements in the manufacturer datasheet.

Impormasyon ng Talumpati sa Engineering for ICS525R-02 — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose the ICS525R-02 when the design needs a programmable clock derived from a crystal or external reference and the selected operating point remains within the 525-02 configuration table. Its 250 MHz maximum output and dedicated divider set make it appropriate for FPGA, network-interface, industrial-control, and data-conversion clock trees. Consider the ICS525R-01 when the required frequencies fit the lower-speed 525-01 configuration. Evaluate the ICS525R-03 when the source architecture is specifically designed around a PECL input rather than a crystal or general clock input. The ICS525R-11 and ICS525R-12 belong to the same 28-pin SSOP family but use different divider configurations, so they are relevant only when those specific paths satisfy the clock plan. For every option, verify voltage, jitter, duty-cycle tolerance, reference requirements, temperature range, and pin behavior before treating it as a drop-in replacement.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto ICS525R-01 ICS525R-03 ICS525R-11 ICS525R-12
Package 28-pin SSOP 28-pin SSOP 28-pin SSOP 28-pin SSOP 28-pin SSOP
Brand Renesas Electronics Renesas Electronics Renesas Electronics Renesas Electronics Renesas Electronics
Maximum Output Frequency 250 MHz 200 MHz 250 MHz 250 MHz 250 MHz
Device Type Clock generator and fanout distribution IC Configurable clock PECL-input configurable clock Configurable clock Configurable clock
Input Configuration Clock or crystal input Clock or crystal input PECL input Clock or crystal input Clock or crystal input
Output Divider Set 525-02 divider configuration 525-01 divider configuration 525-03 divider configuration 525-11 divider configuration 525-12 divider configuration
Body Width 3.90 mm (0.154 inch) 3.90 mm (0.154 inch) 3.90 mm (0.154 inch) 3.90 mm (0.154 inch) 3.90 mm (0.154 inch)

Pangunahing mga Pagkakaiba

  • Higher maximum output frequency than the original 525-01 configuration (kumpara saICS525R-01)
  • Dedicated 525-02 output-divider configuration (kumpara saICS525R-01)
  • Configurable clock-and-crystal input arrangement (kumpara saICS525R-03)

Talaan ng Disenyo

Place the ICS525R-02 close to the crystal or reference-clock source, and route the reference, feedback, and configuration paths away from high-speed clock outputs. Use a continuous ground plane beneath the SSOP and avoid plane splits under the device. At frequencies approaching the 250 MHz maximum, use controlled-impedance clock routing, minimize stubs and test pads, and provide matching termination appropriate to the output topology. The pin assignments and reference schematic should be copied from the manufacturer datasheet rather than inferred from family order codes.

Choose the VCO, reference, and output-divider combination from the manufacturer configuration table before laying out the board. A nominal 250 MHz design goal is not valid unless the selected combination remains within the permitted ranges. Verify output jitter, duty-cycle distortion, rise and fall time, and load capability for the actual frequency. When distributing the clock to multiple loads, include receiver input capacitance and trace loading in the timing budget, and add source-series damping only where the complete clock network supports it.

Do not treat ICS525R-02I, ICS525R-02T, or similar suffix variants as identical order codes without checking temperature, packing, and purchasing requirements. Also avoid assuming that all 525-family members share the same divider table: the manufacturer explicitly distinguishes the 525-01 and 525-02 configurations. Before schematic release, confirm the crystal frequency and load capacitance, PLL mode or bypass state, programmed divider path, supply voltage, and every unused pin according to the device pin-description table.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

No specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals statement was identified for the exact ICS525R-02 ordering information. AEC-Q100 status is not applicable because this is a clock and timing IC rather than an automotive-qualified device.

Data napatotohanan sa: 2026-11-16 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

ICS525R-02 datasheet ICS525R-02 pinout ICS525R-02 datasheet pdf ICS525R-02 equivalent ICS525R-02 replacement ICS525R-02 cross reference ICS525R-02 footprint ICS525R-02 vs ICS525R-01 ICS525R-02 price ICS525R-02 stock Renesas ICS525R-02 ICS525R-02 250MHz clock generator ICS525R-02 SSOP-28 pinout ICS525R-02 FPGA clock

Mga kaugnay na Mga Komponente at mga Tuntunin

Renesas Electronics ICS525R-02 ICS525R-01 ICS525R-03 ICS525R-11 ICS525R-12 OSCaR user-configurable clock clock generator fanout distribution IC phase-locked loop PLL PLL bypass voltage-controlled oscillator VCO output divider crystal oscillator CMOS clock output 250 MHz 28-pin SSOP SSOP package family surface-mount technology FPGA clock tree network-interface timing data-conversion clock
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ