Renesas Electronics

ICS527R-03 - 160MHz Zero-Delay Clock Buffer | Renesas

MPN: ICS527R-03 ✗ Tapus ng Buhay
3.15 V to 3.45 V Vdss 28-SSOP (0.154 inch, 3.90 mm width) Package 160 MHz Speed
MOQ: 1 |

ICS527R-03 Ulas

Renesas Electronics ICS527R-03 is a 160 MHz zero-delay clock buffer and clock-distribution device packaged in a 28-SSOP surface-mount package. It is designed to reproduce an input clock through a low-latency buffer path and distribute that clock to downstream digital circuitry. The device is associated with user-configurable PECL input operation, while its low-voltage supply range is identified as 3.15 V to 3.45 V. The exact output configuration, skew, propagation delay, and input-referred noise are not stated in the available manufacturer listing.

A zero-delay buffer is a clock-buffer IC that offers a very small propagation delay while providing buffering between a clock source and one or more receiving circuits. Clock buffers help isolate the source from downstream loading, reproduce the clock waveform with controlled edge relationships, and simplify distribution across multiple digital blocks. In the broader hierarchy, ICS527R-03 belongs to the clock and timing IC family, which includes clock buffers, clock slicers, clock generators, phase-locked loops, and frequency synthesizers.

The main published specifications identify a maximum operating frequency of 160 MHz and use of a 28-SSOP package measuring 0.154 inch, or 3.90 mm, in width. The 3.15 V to 3.45 V operating-supply range supports low-voltage clocking systems. ICS527R-03 is also described as a fanout or distribution buffer with zero delay, a zero-skew clock-slicing function, and user-configurable PECL input behavior. These characteristics make the device relevant to processors, network interfaces, serializer or deserializer chains, test equipment, and other systems requiring a locally buffered clock.

Clock integrity depends on preserving edge amplitude, rise and fall times, duty cycle, and inter-output timing relationships. A zero-delay architecture is valuable when one source must feed several destinations without allowing receiver input capacitance or board loading to disturb the original clock source. The available listing identifies one output in its abbreviated product description, but it does not expose the complete pin table, input configuration fields, output-enable logic, or detailed timing limits. Those details should be taken directly from the Renesas 527-03 datasheet before schematic capture.

Typical uses include buffering a reference clock into a digital ASIC, distributing a communications clock between parallel processing sections, and regenerating a PECL-compatible clock within high-speed test and measurement systems. Because the ICS527R-03 operates from a narrow 3.3 V-class supply range, the input logic levels and downstream supply voltages must be compatible. Short, impedance-controlled clock traces and solid ground-plane return paths are important when preserving the 160 MHz operating capability.

Designers should reserve the pins shown as control or configuration inputs for their required levels rather than treating unused clock-buffer pins as arbitrary no-connect locations. Termination, biasing, and decoupling depend on the selected PECL input configuration and the particular clock topology. The 28-SSOP footprint requires careful assembly planning because the fine-pitch package has a 3.90 mm body width and may be difficult to rework manually.

This product page consolidates the exact package, frequency, voltage, lifecycle, and sourcing information visible for ICS527R-03 with application guidance, comparison considerations, and practical clock-layout notes. It also distinguishes the device from related 527-series variants and explains which electrical and pin-level details engineers must confirm in the manufacturer datasheet before releasing a production design.

Mga alternatibo na pwedeng ilagay na ICS527R-03 — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

Variante sa Seri na ito

Katulad na modelo sa serye na katugma sa pagpasok ICS527R-03 (parehas na form factor at footprint) — pagkakaiba sa Package.

Renesas Electronics
Package: SSOP-28
Ikabit sa ICS527R-03 →

ICS527R-01IT

✅ Drop-In
📦 28-SSOP (0.154 inch, 3.90 mm width)
The listed functions identify ICS527R-01IT as a zero-delay clock buffer, while ICS527R-03 is identified as a user-configurable PECL clock slicer; frequency and voltage differences require datasheet confirmation.

📋 Alternatibo na Reference (hindi sa katalogo)

ICS527R-01T

✅ Drop-In
📦 28-SSOP (0.154 inch, 3.90 mm width)
The listed functions identify ICS527R-01T as a zero-delay clock buffer, while ICS527R-03 uses a user-configurable PECL input; input logic and timing differences are not numerically published.

📋 Alternatibo na Reference (hindi sa katalogo)

ICS527R-04

✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo
Renesas Electronics
📦 28-SSOP (0.154 inch, 3.90 mm width)
PLL-based clock driver · 160 MHz · User-configurable PECL · Zero-delay buffer · CMOS PLL · SSOP-28 · Surface mount · 0°C to 70°C

Magkontak para sa presyo

Tingnan ang Datasheet →

ICS527R-03 Mga Spesipikasyon

Product Type Zero-delay clock buffer and clock distributor
Maksimum na Taktiko ng Oras 160 MHz
Supply Voltage Range 3.15 V to 3.45 V
Bilang ng Outputs 1 output
Input Configuration User-configurable PECL input
Packhaging 28-SSOP (0.154 inch, 3.90 mm width)
Uri ng Pagpapasok Surface mount
Shipping Package Tube
Katayuan ng Lifecycle Obsolete

Gabay sa Pin Configuration ng ICS527R-03 tube

Pin configuration para sa ICS527R-03 (tube package). Ang pagnunumero ng pin, mga function, at connection diagram ay tinukoy sa datasheet ng manufacturer. Sumangguni dito para sa eksaktong footprint at mga alituntunin sa soldering.

Pinout diagram ng tube package para sa ICS527R-03

Wala ng detalyadong pinout data na magagamit para sa ICS527R-03.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

ICS527R-03 ay nararapat para sa 6 aplikasyons: ASIC Reference-Clock Buffering, Telecommunications Clock Distribution, High-Speed Test and Measurement, Processor Clock-Tree Isolation, Serializer and Deserializer Interfaces, Industrial Control and Instrumentation.

🖥️

ASIC Reference-Clock Buffering

ICS527R-03 fits between a low-voltage reference clock and a demanding digital ASIC when the source must be isolated from receiver capacitance or clock-tree loading. Its 160 MHz maximum operating frequency provides a defined operating limit for common processor and interface clock rates, while the zero-delay buffer architecture minimizes added latency. The 3.15 V to 3.45 V supply range fits 3.3 V-class logic systems. In implementation, the clock source should meet the configured PECL input requirements, the supply should be decoupled near the device, and the output should reach a receiver with controlled impedance and a continuous ground-plane return path.

🌐

Telecommunications Clock Distribution

The ICS527R-03 can buffer a 3.3 V-class system clock before it is distributed across telecommunications or networking logic. A zero-delay clock buffer helps preserve source integrity when the clock must drive multiple functional blocks, while its identified 160 MHz ceiling supports high-speed control and data-conversion sections. The user-configurable PECL input arrangement is particularly relevant where the upstream clock source uses ECL-family levels. Board implementation should include controlled-length clock routes, a continuous reference plane, local supply bypassing, and logic-level checks for every receiving device.

🔧

High-Speed Test and Measurement

ICS527R-03 is applicable in test and measurement equipment where a clean, low-latency clock must be distributed from a central oscillator or pattern source. Its zero-delay characteristic avoids adding a substantial buffering phase delay, and the 160 MHz maximum frequency covers many legacy timing, communications, and instrumentation platforms. The 3.15 V to 3.45 V operating range supports compact low-voltage instrument architectures. Use short clock paths, maintain consistent return current, and observe the configured PECL input thresholds so that source amplitude, biasing, and termination are compatible.

🖥️

Processor Clock-Tree Isolation

ICS527R-03 can serve as an isolation stage between a master oscillator and a processor clock-tree input. Buffering reduces the burden placed directly on the oscillator by downstream input capacitance and allows a short local clock route to the processor. This is useful in legacy systems operating below or at 160 MHz and using a 3.15 V to 3.45 V clock domain. The implementation must preserve edge quality and duty cycle, verify input-versus-output logic thresholds, and provide local decoupling to prevent supply disturbances from appearing as clock jitter.

📡

Serializer and Deserializer Interfaces

ICS527R-03 is suitable for clock buffering around legacy serializer, deserializer, and parallel-interface devices that operate below the published 160 MHz limit. The clock buffer provides a local, low-delay distribution point and can isolate an upstream oscillator from switching loads that would otherwise degrade edge quality. Its narrow 3.3 V-class supply range requires compatible interface devices and careful logic-level matching. Engineers should use the configured PECL input method, verify timing budget margins, and route the output away from noisy switching nodes and power-converter regions.

🏭

Industrial Control and Instrumentation

Legacy industrial control and instrumentation systems can use ICS527R-03 to distribute a low-voltage clock among control logic, converters, and communication blocks. Its 160 MHz rating provides ample bandwidth for many processor and fieldbus-adjacent clock domains, while the zero-delay function keeps the buffering stage transparent to timing. The 3.15 V to 3.45 V operating range supports integrated low-voltage systems. For reliable industrial implementation, verify temperature-grade requirements, isolate the clock route from motors and switching supplies, and confirm that the obsolete lifecycle status has been addressed through a planned sourcing or redesign strategy.

Buod ng mga Inirekomendang Produkto

ICS527R-01IT Related 28-SSOP zero-delay clock-buffer family member Ginagamit sa: ASIC Reference-Clock Buffering, Telecommunications Clock Distribution, Processor Clock-Tree Isolation, Serializer and Deserializer Interfaces ICS527R-01T Related 28-SSOP clock-slicer option Ginagamit sa: ASIC Reference-Clock Buffering, High-Speed Test and Measurement, Serializer and Deserializer Interfaces ICS527R-04 Renesas Electronics Ginagamit sa: Telecommunications Clock Distribution, Processor Clock-Tree Isolation, Industrial Control and Instrumentation ICS527R-03T Closely related 527-series tape-and-reel catalog entry Ginagamit sa: High-Speed Test and Measurement ICS527R-03LF Closely related 527-series catalog entry Ginagamit sa: Industrial Control and Instrumentation
What is the ICS527R-03?
The ICS527R-03 is a Renesas Electronics zero-delay clock buffer and clock-distribution IC operating up to 160 MHz. According to the Renesas 527-03 datasheet and its product listing, the device provides a user-configurable PECL input and is intended for buffering or distributing low-voltage clock signals in high-speed digital systems.
What package does ICS527R-03 use?
The ICS527R-03 uses a 28-SSOP surface-mount package with a body width of 0.154 inch, or 3.90 mm. According to the manufacturer datasheet listing, the package is offered in tube shipping configuration for the base ICS527R-03 ordering code. The exact land pattern and pin numbering should be taken from the package drawing in the Renesas datasheet.
What is the operating voltage of ICS527R-03?
The ICS527R-03 operates from 3.15 V to 3.45 V. The product listing identifies this narrow 3.3 V-class supply range, making the device appropriate for low-voltage clock systems. Designers should also confirm that the selected PECL input configuration, biasing arrangement, and downstream receiver logic levels are compatible with this supply range.
What is the maximum frequency of ICS527R-03?
The maximum published operating frequency of the ICS527R-03 is 160 MHz. According to the Renesas product description, it is a fanout or distribution zero-delay buffer designed to reproduce clock signals at this frequency. Timing margin will depend on the implemented logic levels, trace loading, output configuration, and the clock requirements of the receiving circuit.
Where can I download the ICS527R-03 datasheet PDF?
The official ICS527R-03 datasheet is available through the Renesas 527-03 datasheet page at https://www.renesas.com/en/document/dst/527-03-datasheet. The document should be consulted for the complete pin table, input-configuration truth table, timing characteristics, recommended decoupling, and PECL interface details before the circuit is released.
Where can I find the ICS527R-03 pinout?
The ICS527R-03 pinout is contained in the pin-description table of the Renesas 527-03 datasheet. The device uses a 28-SSOP package, so all 28 terminal positions must be assigned during schematic review, including power, ground, clock inputs, clock outputs, and configuration or control terminals. Use the manufacturer drawing rather than inferring unused pins.
Where can I buy ICS527R-03?
The current availability of the obsolete ICS527R-03 can be requested through the Request a Quote form on this page. Because lifecycle status is obsolete, buyers should request the exact MPN, manufacturer, package, lot condition, and any traceability information needed for their application before placing an order.
How much does ICS527R-03 cost?
A current quotation for ICS527R-03 should be requested through the Request a Quote form on this page, where quantity and lot requirements can be specified. Since the device is marked obsolete, its commercial value depends on exact ordering code, package condition, quantity, and traceability rather than on a single standard price.
Is ICS527R-03 in stock and what is its lead time?
Current stock and lead time for ICS527R-03 should be confirmed through the Request a Quote form on this page. The component is listed as obsolete, so availability can be limited and production planning should account for possible lot, date-code, or condition constraints. Request the proposed lot details before committing the design to continued procurement.
What can replace ICS527R-03?
ICS527R-03LF and ICS527R-03T are closely related ordering variants, but the closest functional replacement depends on the required input configuration, output count, logic levels, and timing limits. Use the Renesas cross-reference tool and the 527-03 datasheet to confirm compatibility before substitution. A package match alone does not establish pin-to-pin equivalence.
Is ICS527R-03LF the same as ICS527R-03?
ICS527R-03LF and ICS527R-03 refer to closely related Renesas 527-series catalog entries, but the exact ordering-code meanings must be confirmed in the manufacturer ordering guide. Both are associated with the 28-SSOP clock-buffer family and a 160 MHz listing. Verify suffix-specific temperature, packing, and lifecycle requirements before treating one as a drop-in replacement.
ICS527R-03 vs ICS527R-01IT: which is better for a PECL clock?
Choose ICS527R-03 when the design specifically calls for the user-configurable PECL clock-buffer function identified for that part. ICS527R-01IT is another 28-SSOP zero-delay clock-slicer option, but the available comparison identifies it as a zero-delay buffer rather than the same PECL-configured function. Confirm input levels, timing, and pin behavior in the datasheets before selection.
When should I choose ICS527R-03 instead of ICS527R-01T?
Choose ICS527R-03 when a low-voltage, user-configurable PECL clock source requires the 160 MHz zero-delay buffer function and the associated 3.15 V to 3.45 V operating range. Choose ICS527R-01T when its clock-slicer configuration better matches the source and receiver logic. The choice must be based on interface and timing requirements rather than package similarity.
Is ICS527R-03 suitable for high-speed digital systems?
The ICS527R-03 is suitable for high-speed clock distribution when the system operates within its published 160 MHz limit and 3.15 V to 3.45 V supply range. Its zero-delay buffer role can isolate a clock source from downstream loading. Practical performance still depends on correct PECL configuration, controlled trace impedance, sound return paths, and compliant clock-tree architecture.
What are the key specifications of ICS527R-03 that engineers should know?
The principal published specifications for ICS527R-03 are a 160 MHz maximum clock frequency, a 3.15 V to 3.45 V supply range, one identified output, user-configurable PECL input behavior, and a 28-SSOP surface-mount package measuring 3.90 mm in width. The Renesas 527-03 datasheet remains the authority for propagation delay, skew, duty cycle, and pin-level details.
What is the best Renesas equivalent for ICS527R-03?
The best Renesas equivalent depends on whether the requirement is the exact base ordering code, a lead-free suffix, a temperature-grade variant, or the closely related ICS527-04 family. ICS527R-03LF is the closest published catalog alternative, while ICS527R-03T is a tape-and-reel ordering option. Use Renesas cross-reference results and the manufacturer datasheet to confirm electrical and pin compatibility.

Impormasyon ng Talumpati sa Engineering for ICS527R-03 — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose ICS527R-03 when maintaining an existing 28-SSOP design that requires a 160 MHz zero-delay clock buffer, a 3.15 V to 3.45 V supply, and the identified user-configurable PECL input function. It is most appropriate for legacy telecommunications, test equipment, processor, and instrumentation platforms where PCB redesign is undesirable. ICS527R-01IT or ICS527R-01T may be considered when the required interface is a generic zero-delay clock buffer, but their electrical limits and pin behavior must match the existing design. ICS527R-04 belongs to the related configurable clock-slicer family and may be preferable when its specific configuration matches the clock tree better. Because ICS527R-03 is obsolete, new designs should first confirm long-term availability through the Request a Quote form and evaluate a planned redesign. Any substitute must pass a full datasheet review covering pinout, logic thresholds, propagation delay, skew, output count, supply range, and temperature grade.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto ICS527R-01IT ICS527R-01T ICS527R-04
Brand Renesas Electronics Renesas Electronics Renesas Electronics Renesas Electronics
Package 28-SSOP (0.154 inch, 3.90 mm width) 28-SSOP 28-SSOP 28-SSOP
Device Function User-configurable PECL zero-delay clock buffer and clock slicer Zero-delay clock buffer and clock slicer Zero-delay clock buffer and clock slicer User-configurable zero-delay clock slicer

Pangunahing mga Pagkakaiba

  • PECL-oriented configuration within the 527 clock-slicer family (kumpara saICS527R-01IT)
  • Published 160 MHz operating point (kumpara saICS527R-01T)
  • Narrow low-voltage operating range (kumpara saICS527R-04)
  • Obsolete-status visibility for legacy procurement planning (kumpara saICS527R-01IT)

Talaan ng Disenyo

Treat the clock path as a controlled-impedance transmission line rather than an ordinary logic trace. Place the ICS527R-03 near the clock source or the first clock-consuming branch, minimize stub branches, and provide a continuous ground plane beneath the route. This reduces sensitivity to receiver capacitance and helps preserve clean edges at the published 160 MHz operating limit.

Do not assume that a PECL input can be connected directly to every 3.3 V clock source. Review the input-configuration truth table, required bias network, termination arrangement, and voltage thresholds in the Renesas 527-03 datasheet. Incorrect biasing or an incompatible source amplitude can cause unreliable switching even when the clock frequency is below 160 MHz.

Use the manufacturer SSOP land pattern and follow its solder-mask and paste recommendations. Keep the clock input and output routes away from switching power nodes, relay drivers, high-current edges, and isolation barriers. Short ground-return paths are especially important because the clock signal depends on a clean reference plane for predictable edge timing.

Place the required supply-decoupling capacitors close to the power and ground terminals and route them using short, low-inductance paths. Keep the clock buffer's supply network independent from noisy digital switching currents where practical. Operating the device only within the specified 3.15 V to 3.45 V range preserves margin for supply ripple and clock-edge quality.

The available information does not establish a worst-case internal power dissipation because propagation-delay and output-loading details are not published in the product listing. Estimate dissipation from the actual supply voltage, output toggle rate, load capacitance, and internal power specification before committing to a PCB thermal design. Validate the finished assembly at the highest expected clock activity and ambient temperature.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

No definitive RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations were identified for the exact ICS527R-03 ordering code.

Data napatotohanan sa: 2026-11-16 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

ICS527R-03 datasheet ICS527R-03 datasheet pdf ICS527R-03 pinout ICS527R-03 equivalent ICS527R-03 replacement ICS527R-03 cross reference ICS527R-03 vs ICS527R-04 ICS527R-03 160MHz clock buffer ICS527R-03 28-SSOP package ICS527R-03 PECL input ICS527R-03 clock distribution application ICS527R-03 price

Mga kaugnay na Mga Komponente at mga Tuntunin

Renesas Electronics ICS527R-03 ICS527R-03LF ICS527R-03T ICS527R-01IT ICS527R-01T ICS527R-04 zero-delay buffer clock buffer clock distributor clock slicer clock and timing IC PECL 160 MHz 3.15 V to 3.45 V supply 28-SSOP SSOP package family surface mount clock-tree isolation propagation delay output skew legacy clock architecture obsolete component
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ