Renesas Electronics

ICS570BI - 170MHz 3.3V Zero Delay Buffer | Renesas

MPN: ICS570BI ✓ Nakahanda
3.3 V design Vdss 8-pin SOIC Package 170 MHz Speed
MOQ: 1 |

ICS570BI Ulas

Renesas Electronics ICS570BI is a 170 MHz fanout-distribution, spread-spectrum clock generator and zero-delay buffer built around analog/digital phase-locked-loop techniques. The B-version is intended for 3.3 V designs and is supplied in an 8-pin SOIC package measuring approximately 3.90 mm in width. Its zero-delay-buffer architecture distributes a clock signal while compensating for propagation delay through the PLL-based clock path.

A zero-delay buffer is a clock-management semiconductor that reproduces an input clock at one or more outputs with very low transfer delay. It belongs to the clock buffer hierarchy, where it sits between a clock source and digital logic requiring multiple synchronized copies. Unlike a basic logic buffer, the ICS570BI combines an analog/digital PLL with fanout and spread-spectrum clock functions, placing it within the broader clock and timing IC category.

The principal operating characteristics visible in the product documentation include a maximum clock frequency of 170 MHz, one fanout output, a 3.3 V B-version supply target, spread-spectrum clock generation, zero-delay operation, and an 8-pin SOIC package. The spread-spectrum function is useful when reducing concentrated clock energy on a narrow frequency band, while the fanout output provides a local clock for digital circuitry. The single-output arrangement favors designs that need one precisely distributed clock rather than several independent destinations.

Renesas describes the ICS570 as a performance upgrade within the IDT ClockBlocks family, using proprietary analog/digital PLL techniques. This architecture is intended to support higher-speed and lower-voltage systems while maintaining a clock distribution function. The B version is specifically recommended for 3.3 V designs, while the A version is associated with 5 V designs; substituting those versions requires a complete power and timing review rather than simple interchangeability.

Typical uses include processor-clock distribution, communications equipment, data-conversion systems, digital control boards, and other synchronous electronics requiring a low-delay clock source. In these applications, the device can reduce the load presented to an upstream oscillator or clock controller while delivering a clean local copy to a receiving circuit. Spread-spectrum operation can also assist systems that need to reduce narrowband clock peaks, although exact spread-spectrum range and configuration details must be confirmed from the manufacturer datasheet.

The primary design consideration is power-domain compatibility: the ICS570BI is the 3.3 V version and must not be treated as an automatic substitute for a 5 V ICS570 variant. Board designers should also preserve the bypass-capacitor and layout guidance in the manufacturer datasheet because PLL-based clock devices can be sensitive to return-current paths and supply-noise coupling. A solid ground plane and short supply connections help isolate the clock output from switching noise.

This product page combines the manufacturer function description with the exact package and operating identifiers, then adds application guidance, comparison fields, and practical design considerations. It is intended to help engineers identify the correct 3.3 V zero-delay buffer, locate the authoritative datasheet, assess replacement constraints, and plan a clock-distribution layout before committing the footprint to production hardware.

Mga alternatibo na pwedeng ilagay na ICS570BI — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

Wala ng magagamit na drop-in alternatibo para sa produkto na ito.

Hilingin ang Alternatibo

ICS570BI Mga Spesipikasyon

Product Type Fanout distribution, spread-spectrum clock generator, zero-delay buffer IC
Maksimum na Taktiko ng Oras 170 MHz
Number of Fanout Outputs 1 output
Supply Voltage Version 3.3 V design
Clock Architecture Analog/digital PLL
Transfer Delay Zero-delay buffer
Clock Distribution Feature Spread-spectrum clock generation
Packhaging 8-pin SOIC
Package Width 3.90 mm
Package Length 0.154 inch
Uri ng Pagpapasok Surface mount
Product Family IDT ClockBlocks

Gabay sa Pin Configuration ng ICS570BI 0.154 inch

Pin configuration para sa ICS570BI (0.154 inch package). Ang pagnunumero ng pin, mga function, at connection diagram ay tinukoy sa datasheet ng manufacturer. Sumangguni dito para sa eksaktong footprint at mga alituntunin sa soldering.

Pinout diagram ng 0.154 inch package para sa ICS570BI

Wala ng detalyadong pinout data na magagamit para sa ICS570BI.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

ICS570BI ay nararapat para sa 6 aplikasyons: Processor Clock Distribution, Communications Equipment Clocking, Data Converter Support Clocking, Industrial Control and Instrumentation, Test and Measurement Systems, Audio and Digital Interface Equipment.

🖥️

Processor Clock Distribution

The ICS570BI can serve as a dedicated 3.3 V clock-distribution stage between a processor clock source and a receiving logic device. Its zero-delay-buffer function is intended to reproduce the clock while compensating for path delay, and the one-output configuration suits systems requiring one local clock rather than a multi-output fanout tree. The 170 MHz operating capability is relevant to high-speed digital systems, although the receiving device must tolerate the phase relationship and jitter produced by the PLL-based architecture. Follow the Renesas Electronics 570 datasheet for the input feedback arrangement, output loading limits, and decoupling guidance. Keep the clock route short and referenced by a continuous ground plane to minimize trace delay variation, coupling, and supply-to-clock noise.

🌐

Communications Equipment Clocking

Communications equipment can use the ICS570BI to isolate a local logic domain from the clock source driving it while retaining a low-delay output. Its spread-spectrum feature is relevant to systems that need to avoid concentrating clock energy around one narrow frequency band. The B version's 3.3 V association makes it appropriate for modern low-voltage digital sections, provided the complete clock network is designed around 3.3 V. Engineering review should cover jitter sensitivity, output drive, trace impedance, and the spread-spectrum configuration permitted by the manufacturer. Ground and bypass connections should follow the datasheet reference layout, and the clock trace should remain away from switching power stages to preserve signal quality.

📺

Data Converter Support Clocking

The ICS570BI can provide a local, low-delay clock to high-speed data-conversion systems that require a controlled relationship between sampling devices and digital control logic. At up to 170 MHz, the device is relevant to clocking architectures where the fanout output feeds a converter, interface, or capture circuit. The zero-delay function helps place the clock close to the system timing boundary, while spread-spectrum operation may help control concentrated spectral energy in the finished assembly. Designers should confirm converter setup-and-hold requirements, allowable jitter, and whether source-synchronous routing is preferable. Use short, properly referenced traces and verify the manufacturer's recommended input, output, supply, and grounding connections before releasing the layout.

🏭

Industrial Control and Instrumentation

In industrial control and instrumentation equipment, the ICS570BI can distribute a 3.3 V system clock to a controller, capture channel, or communications block. The dedicated clock path reduces loading on an upstream oscillator or controller and provides a defined fanout output for downstream logic. Spread-spectrum clock generation can be useful when reducing narrowband clock peaks in sensitive equipment, but the modulation settings and system-level benefit must be verified for each design. The operating-temperature and electrical limits should be checked against the enclosure's ambient range. Keep sensitive clock traces away from relay drivers, power-conversion stages, and motor-control circuitry, and provide the datasheet-recommended bypass network directly at the device.

🔧

Test and Measurement Systems

The ICS570BI is applicable in test and measurement systems that need a low-delay clock copy for capture logic, counters, converters, or synchronized instruments. Its 170 MHz capability supports high-speed digital timing, while the single fanout output can feed one critical instrument block without introducing an unnecessary multi-output distribution stage. Spread-spectrum operation may reduce narrowband energy in a measurement enclosure, although analyzers and stimulus paths can react differently to frequency modulation. Verify jitter, skew, and output timing at the actual load and trace configuration. Use a controlled ground reference, short clock routes, and separate the clock supply return from high-current analog and power-conversion paths to maintain measurement integrity.

🎧

Audio and Digital Interface Equipment

Audio and digital-interface equipment can use the ICS570BI to distribute a local clock to interface converters, control logic, or a communications section. The zero-delay-buffer architecture is suited to clocking paths where the output must follow the source with minimal added delay, while spread-spectrum generation can assist spectral-energy distribution. Because audio products often combine small logic rails with sensitive analog circuitry, the 3.3 V B version must match the clock domain and maintain clear separation from analog return currents. Keep the output route short, avoid routing beneath switching converters, and use the manufacturer's recommended bypass and grounding arrangement. Confirm jitter and modulation effects against the clock requirements of the connected converter and interface devices.

What is the ICS570BI?
The ICS570BI is a Renesas Electronics 170 MHz fanout-distribution, spread-spectrum clock generator and zero-delay buffer in an 8-pin SOIC package. According to the Renesas Electronics ICS570 datasheet, it integrates proprietary analog/digital phase-locked-loop techniques and is the B version intended for 3.3 V designs. The device provides one fanout output and is suitable for distributing a clock to synchronous digital logic while adding spread-spectrum clock functionality.
What is the operating frequency of ICS570BI?
The ICS570BI supports clocks up to 170 MHz. This figure appears in the Renesas Electronics product listing and is the principal frequency identifier for the device. When using the part near its upper frequency limit, account for output loading, trace length, supply integrity, and the clock requirements of the receiving circuit. The manufacturer datasheet remains the controlling source for detailed timing, jitter, skew, and operating-condition limits.
Is ICS570BI a 3.3 V or 5 V device?
ICS570BI is the 3.3 V version of the ICS570 family. The Renesas Electronics ICS570 datasheet states that the B version is recommended for 3.3 V designs, while the A version is recommended for 5 V designs. This distinction is important during replacement because supply compatibility, timing behavior, and internal biasing must be checked before assigning a different family member to an existing board.
Where can I download the ICS570BI datasheet PDF?
The authoritative ICS570BI datasheet is available through the Renesas Electronics 570 datasheet page at https://www.renesas.com/document/dst/570-datasheet. Use that document for the exact pin descriptions, recommended application circuit, electrical characteristics, timing measurements, and operating limits. The product is also documented through the 570 family datasheet rather than through a separate document containing the B suffix in its title.
Where can I find the ICS570BI pinout?
The ICS570BI pinout is located in the pin-configuration and pin-description sections of the Renesas Electronics 570 datasheet. The package is an 8-pin SOIC, but function names and no-connect assignments must be transcribed from the manufacturer drawing rather than inferred from a generic SOIC footprint. Use the datasheet pin table to connect the supply, ground, input clock, feedback or reference connection, and output according to the intended configuration.
What clock functions does the ICS570BI provide?
The ICS570BI provides zero-delay clock buffering, one-output fanout distribution, and spread-spectrum clock generation in one 8-pin SOIC device. Renesas describes the internal clock path as a proprietary analog/digital PLL arrangement within the IDT ClockBlocks family. These functions allow an upstream clock source to drive downstream synchronous logic through a dedicated clock-distribution stage while controlling the relationship between input and output clock phase.
What can replace ICS570BI?
A suitable replacement for ICS570BI must use the same 8-pin SOIC footprint and support the required 3.3 V clocking function at the applicable frequency. No verified pin-compatible substitute is identified on this page, so a candidate should not be called a drop-in replacement until its pinout, supply range, output configuration, timing, and spread-spectrum behavior have been checked. Requesting a quote on this page is the appropriate way to ask about replacement sourcing for the exact ICS570BI ordering code.
Is ICS570BI the same as ICS570AI?
No. ICS570BI and ICS570AI belong to the same ICS570 family but target different supply voltages. The Renesas Electronics ICS570 datasheet identifies the B version for 3.3 V designs and the A version for 5 V designs. Their shared family background does not make them automatically interchangeable, and the distinction means ICS570AI cannot be treated as a pin-for-pin replacement without a complete electrical and timing review.
When should I choose ICS570BI for a clock-distribution design?
Choose ICS570BI when a 3.3 V system needs a dedicated zero-delay clock path with one fanout output and spread-spectrum operation. It is particularly relevant when the upstream clock source should not directly drive the receiving logic or when narrowband clock-energy concentration needs to be reduced. It is less suitable when multiple independent outputs are required, when the system uses a 5 V clock domain, or when a confirmed alternative offers a different pinout or output arrangement.
Is ICS570BI suitable for communications and processor-clock systems?
ICS570BI is suitable for clock-distribution roles in communications equipment, processor interfaces, data-conversion systems, and digital control electronics. Its 170 MHz operating capability supports high-speed digital clocking, while the zero-delay buffer provides a dedicated distribution path and the spread-spectrum feature can reduce narrowband clock peaks. Final suitability depends on receiver timing tolerance, trace topology, loading, jitter requirements, and compliance targets for the finished equipment.
What is the best equivalent for ICS570BI?
The best equivalent for ICS570BI is an 8-pin SOIC clock buffer that reproduces the same pin functions at 3.3 V and supports the required clock frequency, timing, jitter, and spread-spectrum behavior. The ICS570 family page establishes the functional architecture, but it does not establish a separate cross-brand part as pin compatible. Verify any proposed equivalent against the ICS570BI pin description and electrical characteristics before using it on an unmodified PCB.
How should the ICS570BI PCB layout be designed?
Place the ICS570BI close to the clock source and receiver, keep the clock trace short, and provide a continuous ground reference beneath the device and clock routes. Follow the Renesas Electronics 570 datasheet for the recommended input, output, and bypass-capacitor connections. Short supply and ground returns help prevent return-current discontinuity, while keeping the clock trace away from noisy power switches and high-current paths reduces the chance of coupled jitter.
How does spread-spectrum clocking help an ICS570BI design?
Spread-spectrum clocking distributes clock energy over a frequency band rather than concentrating it around one carrier frequency. This can reduce peak spectral concentration in communications and test systems and may help with electromagnetic-emission control. The benefit is system-dependent, and the actual reduction depends on the configured deviation, clock frequency, board layout, filtering, and measurement bandwidth. Confirm the supported spread-spectrum behavior and configuration limits in the manufacturer datasheet.
Does ICS570BI require special power-supply decoupling?
Yes, the ICS570BI should use the supply bypassing and grounding arrangement specified in the Renesas Electronics ICS570 datasheet. A PLL-based zero-delay buffer can translate supply noise into clock jitter, so the device should be connected to a low-impedance supply and ground plane with short return paths. Place bypass capacitance close to the supply pins and route clock and sensitive digital traces away from switching-current loops to preserve timing performance.
Where can I buy ICS570BI and check its lead time?
Use the Request a Quote form on this page to inquire about the exact ICS570BI ordering code, current availability, lead time, and order quantity. The request should state whether the part is needed as a standard production quantity, prototype lot, or scheduled replenishment. Price and inventory can change, so a current quotation provides more reliable commercial information than a static page reference.
What key specifications should engineers know about ICS570BI?
The key ICS570BI specifications are a maximum frequency of 170 MHz, one fanout output, a 3.3 V design target, analog/digital PLL operation, zero-delay buffering, and an 8-pin SOIC package measuring about 3.90 mm wide. The device also provides spread-spectrum clock generation. These figures are summarized in the Renesas Electronics ICS570 datasheet and product listing; detailed timing, jitter, temperature, and supply limits should be taken from the datasheet.

Impormasyon ng Talumpati sa Engineering for ICS570BI — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose ICS570BI when a system requires a 3.3 V, 170 MHz zero-delay clock path with one fanout output and spread-spectrum capability. It is well matched to low-voltage digital logic, communications equipment, data converters, and test systems that benefit from a dedicated local clock stage. Do not choose it for a 5 V clock domain, a design requiring multiple output clocks, or an application whose downstream receiver cannot tolerate the family architecture's timing behavior. No verified drop-in substitute is listed because the available cross-reference results do not establish a separate manufacturer and MPN with the same 8-pin SOIC pinout, 3.3 V operation, and timing characteristics. For any proposed replacement, verify the pin assignment, supply range, maximum frequency, output count, jitter, skew, and spread-spectrum behavior against the ICS570 datasheet before modifying an existing board.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto
Brand Renesas Electronics
Package 8-pin SOIC
Product Type Fanout distribution, spread-spectrum clock generator, zero-delay buffer IC
Maximum Clock Frequency 170 MHz
Number of Fanout Outputs 1 output
Supply Voltage Target 3.3 V design
Clock Architecture Analog/digital PLL
Transfer Delay Zero-delay buffer
Spread-Spectrum Function Supported

Pangunahing mga Pagkakaiba

  • Combines zero-delay buffering with spread-spectrum clock generation (kumpara saICS570AI)
  • Dedicated single-output clock-distribution function (kumpara saGeneric SOIC logic buffer)
  • Low-voltage-oriented member of the ICS570 family (kumpara saICS570AI)

Talaan ng Disenyo

Place the ICS570BI close to the source and destination clock pins, and route the clock over a continuous ground reference. Keep the supply bypass network close to the device and use short ground returns so switching current does not share the clock return path. The Renesas Electronics ICS570 datasheet should control the final input, output, and capacitor configuration. Avoid long stubs and unnecessary test-point branches because they change propagation delay and can degrade the benefit of the zero-delay-buffer architecture.

Treat the ICS570BI output as a timing signal and evaluate it with realistic loading, trace length, and receiving-device threshold assumptions. Keep the route away from power-switching nodes, relay-driver outputs, and other high-current paths. When spread-spectrum operation is enabled, verify that the resulting modulation is acceptable to the downstream receiver, ADC, DAC, serializer, or memory interface. The one-output architecture should be matched to the actual fanout requirement rather than used as a substitute for a multi-output clock buffer.

Do not interchange the ICS570BI with the 5 V-oriented A version solely because the devices share the ICS570 family name. The B version is identified with 3.3 V designs, so supply range, timing, and operating characteristics must be reviewed before substitution. Also avoid assuming that a generic 8-pin SOIC equivalent is pin compatible. Confirm every pin name, no-connect position, input configuration, output behavior, and package drawing against the manufacturer datasheet before releasing replacement hardware.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

No specific RoHS, REACH, halogen-free, or conflict-minerals declaration is stated in the cited Renesas Electronics product information.

Data napatotohanan sa: 2026-11-11 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

ICS570BI datasheet ICS570BI pinout ICS570BI datasheet pdf ICS570BI 170MHz ICS570BI 3.3V ICS570BI zero delay buffer ICS570BI spread spectrum clock ICS570BI SOIC-8 ICS570BI equivalent ICS570BI replacement Renesas ICS570BI ICS570BI price ICS570BI stock ICS570BI clock generator ICS570BI application circuit

Mga kaugnay na Mga Komponente at mga Tuntunin

Renesas Electronics ICS570BI ICS570AI ICS570 IDT ClockBlocks zero-delay buffer ZDB fanout distributor spread-spectrum clock generator clock buffer clock and timing IC analog/digital PLL phase-locked loop 170 MHz 3.3 V 8-pin SOIC SOIC family surface-mount package clock distribution output jitter clock skew spread-spectrum clocking communications equipment data-conversion systems industrial control electronics
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ