ICS570BI - 170MHz 3.3V Zero Delay Buffer | Renesas
부품 번호: ICS570BI ✓ 활성ICS570BI 개요
A zero-delay buffer is a clock-management semiconductor that reproduces an input clock at one or more outputs with very low transfer delay. It belongs to the clock buffer hierarchy, where it sits between a clock source and digital logic requiring multiple synchronized copies. Unlike a basic logic buffer, the ICS570BI combines an analog/digital PLL with fanout and spread-spectrum clock functions, placing it within the broader clock and timing IC category.
The principal operating characteristics visible in the product documentation include a maximum clock frequency of 170 MHz, one fanout output, a 3.3 V B-version supply target, spread-spectrum clock generation, zero-delay operation, and an 8-pin SOIC package. The spread-spectrum function is useful when reducing concentrated clock energy on a narrow frequency band, while the fanout output provides a local clock for digital circuitry. The single-output arrangement favors designs that need one precisely distributed clock rather than several independent destinations.
Renesas describes the ICS570 as a performance upgrade within the IDT ClockBlocks family, using proprietary analog/digital PLL techniques. This architecture is intended to support higher-speed and lower-voltage systems while maintaining a clock distribution function. The B version is specifically recommended for 3.3 V designs, while the A version is associated with 5 V designs; substituting those versions requires a complete power and timing review rather than simple interchangeability.
Typical uses include processor-clock distribution, communications equipment, data-conversion systems, digital control boards, and other synchronous electronics requiring a low-delay clock source. In these applications, the device can reduce the load presented to an upstream oscillator or clock controller while delivering a clean local copy to a receiving circuit. Spread-spectrum operation can also assist systems that need to reduce narrowband clock peaks, although exact spread-spectrum range and configuration details must be confirmed from the manufacturer datasheet.
The primary design consideration is power-domain compatibility: the ICS570BI is the 3.3 V version and must not be treated as an automatic substitute for a 5 V ICS570 variant. Board designers should also preserve the bypass-capacitor and layout guidance in the manufacturer datasheet because PLL-based clock devices can be sensitive to return-current paths and supply-noise coupling. A solid ground plane and short supply connections help isolate the clock output from switching noise.
This product page combines the manufacturer function description with the exact package and operating identifiers, then adds application guidance, comparison fields, and practical design considerations. It is intended to help engineers identify the correct 3.3 V zero-delay buffer, locate the authoritative datasheet, assess replacement constraints, and plan a clock-distribution layout before committing the footprint to production hardware.
드롭인 대체품: ICS570BI — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 제품에는 사용 가능한 드롭인 대체품이 없습니다.
대체품 요청ICS570BI 사양
| Product Type | Fanout distribution, spread-spectrum clock generator, zero-delay buffer IC |
| 최대 클록 주파수 | 170 MHz |
| Number of Fanout Outputs | 1 output |
| Supply Voltage Version | 3.3 V design |
| Clock Architecture | Analog/digital PLL |
| Transfer Delay | Zero-delay buffer |
| Clock Distribution Feature | Spread-spectrum clock generation |
| 패키지 | 8-pin SOIC |
| Package Width | 3.90 mm |
| Package Length | 0.154 inch |
| 실장 유형 | Surface mount |
| Product Family | IDT ClockBlocks |
ICS570BI 0.154 inch 핀 구성 가이드
ICS570BI(0.154 inch 패키지)의 핀 구성입니다. 핀 번호, 기능, 연결 다이어그램은 제조사 데이터시트에 정의되어 있습니다. 정확한 풋프린트와 솔더링 지침은 해당 문서를 참조하십시오.
다음에 대한 상세 핀아웃 데이터 없음: ICS570BI.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
ICS570BI 적합 용도: 6 애플리케이션s: Processor Clock Distribution, Communications Equipment Clocking, Data Converter Support Clocking, Industrial Control and Instrumentation, Test and Measurement Systems, Audio and Digital Interface Equipment.
Processor Clock Distribution
The ICS570BI can serve as a dedicated 3.3 V clock-distribution stage between a processor clock source and a receiving logic device. Its zero-delay-buffer function is intended to reproduce the clock while compensating for path delay, and the one-output configuration suits systems requiring one local clock rather than a multi-output fanout tree. The 170 MHz operating capability is relevant to high-speed digital systems, although the receiving device must tolerate the phase relationship and jitter produced by the PLL-based architecture. Follow the Renesas Electronics 570 datasheet for the input feedback arrangement, output loading limits, and decoupling guidance. Keep the clock route short and referenced by a continuous ground plane to minimize trace delay variation, coupling, and supply-to-clock noise.
추천
Communications Equipment Clocking
Communications equipment can use the ICS570BI to isolate a local logic domain from the clock source driving it while retaining a low-delay output. Its spread-spectrum feature is relevant to systems that need to avoid concentrating clock energy around one narrow frequency band. The B version's 3.3 V association makes it appropriate for modern low-voltage digital sections, provided the complete clock network is designed around 3.3 V. Engineering review should cover jitter sensitivity, output drive, trace impedance, and the spread-spectrum configuration permitted by the manufacturer. Ground and bypass connections should follow the datasheet reference layout, and the clock trace should remain away from switching power stages to preserve signal quality.
추천
Data Converter Support Clocking
The ICS570BI can provide a local, low-delay clock to high-speed data-conversion systems that require a controlled relationship between sampling devices and digital control logic. At up to 170 MHz, the device is relevant to clocking architectures where the fanout output feeds a converter, interface, or capture circuit. The zero-delay function helps place the clock close to the system timing boundary, while spread-spectrum operation may help control concentrated spectral energy in the finished assembly. Designers should confirm converter setup-and-hold requirements, allowable jitter, and whether source-synchronous routing is preferable. Use short, properly referenced traces and verify the manufacturer's recommended input, output, supply, and grounding connections before releasing the layout.
추천
Industrial Control and Instrumentation
In industrial control and instrumentation equipment, the ICS570BI can distribute a 3.3 V system clock to a controller, capture channel, or communications block. The dedicated clock path reduces loading on an upstream oscillator or controller and provides a defined fanout output for downstream logic. Spread-spectrum clock generation can be useful when reducing narrowband clock peaks in sensitive equipment, but the modulation settings and system-level benefit must be verified for each design. The operating-temperature and electrical limits should be checked against the enclosure's ambient range. Keep sensitive clock traces away from relay drivers, power-conversion stages, and motor-control circuitry, and provide the datasheet-recommended bypass network directly at the device.
추천
Test and Measurement Systems
The ICS570BI is applicable in test and measurement systems that need a low-delay clock copy for capture logic, counters, converters, or synchronized instruments. Its 170 MHz capability supports high-speed digital timing, while the single fanout output can feed one critical instrument block without introducing an unnecessary multi-output distribution stage. Spread-spectrum operation may reduce narrowband energy in a measurement enclosure, although analyzers and stimulus paths can react differently to frequency modulation. Verify jitter, skew, and output timing at the actual load and trace configuration. Use a controlled ground reference, short clock routes, and separate the clock supply return from high-current analog and power-conversion paths to maintain measurement integrity.
추천
Audio and Digital Interface Equipment
Audio and digital-interface equipment can use the ICS570BI to distribute a local clock to interface converters, control logic, or a communications section. The zero-delay-buffer architecture is suited to clocking paths where the output must follow the source with minimal added delay, while spread-spectrum generation can assist spectral-energy distribution. Because audio products often combine small logic rails with sensitive analog circuitry, the 3.3 V B version must match the clock domain and maintain clear separation from analog return currents. Keep the output route short, avoid routing beneath switching converters, and use the manufacturer's recommended bypass and grounding arrangement. Confirm jitter and modulation effects against the clock requirements of the connected converter and interface devices.
추천
추천 제품 요약
엔지니어링 참조 데이터: ICS570BI — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 |
|---|---|
| Brand | Renesas Electronics |
| Package | 8-pin SOIC |
| Product Type | Fanout distribution, spread-spectrum clock generator, zero-delay buffer IC |
| Maximum Clock Frequency | 170 MHz |
| Number of Fanout Outputs | 1 output |
| Supply Voltage Target | 3.3 V design |
| Clock Architecture | Analog/digital PLL |
| Transfer Delay | Zero-delay buffer |
| Spread-Spectrum Function | Supported |
주요 차별점
- Combines zero-delay buffering with spread-spectrum clock generation (vs ICS570AI)
- Dedicated single-output clock-distribution function (vs Generic SOIC logic buffer)
- Low-voltage-oriented member of the ICS570 family (vs ICS570AI)
설계 노트
Place the ICS570BI close to the source and destination clock pins, and route the clock over a continuous ground reference. Keep the supply bypass network close to the device and use short ground returns so switching current does not share the clock return path. The Renesas Electronics ICS570 datasheet should control the final input, output, and capacitor configuration. Avoid long stubs and unnecessary test-point branches because they change propagation delay and can degrade the benefit of the zero-delay-buffer architecture.
Treat the ICS570BI output as a timing signal and evaluate it with realistic loading, trace length, and receiving-device threshold assumptions. Keep the route away from power-switching nodes, relay-driver outputs, and other high-current paths. When spread-spectrum operation is enabled, verify that the resulting modulation is acceptable to the downstream receiver, ADC, DAC, serializer, or memory interface. The one-output architecture should be matched to the actual fanout requirement rather than used as a substitute for a multi-output clock buffer.
Do not interchange the ICS570BI with the 5 V-oriented A version solely because the devices share the ICS570 family name. The B version is identified with 3.3 V designs, so supply range, timing, and operating characteristics must be reviewed before substitution. Also avoid assuming that a generic 8-pin SOIC equivalent is pin compatible. Confirm every pin name, no-connect position, input configuration, output behavior, and package drawing against the manufacturer datasheet before releasing replacement hardware.
규정 준수 정보
No specific RoHS, REACH, halogen-free, or conflict-minerals declaration is stated in the cited Renesas Electronics product information.