Texas Instruments

INA111AUG4 - 2 MHz FET-Input Instrumentation Amp | TI

MPN: INA111AUG4 ✓ Nakahanda
Laser trimmed Vdss 16-SOIC Package
MOQ: 1 |

INA111AUG4 Ulas

The Texas Instruments INA111AUG4 is a high-speed, FET-input instrumentation amplifier packaged in a 16-pin SOIC. It provides one amplifier circuit, a gain bandwidth of 2 MHz, user-selectable gain from 1 to more than 1000 using one external resistor, and settling to 0.01% in 4 microseconds at a gain of 100. Its low-noise FET input stage is suited to measuring small differential signals buried in a larger common-mode voltage.

An instrumentation amplifier is a specialized differential analog amplifier designed for sensor conditioning. Its internal architecture preserves signal integrity by rejecting common-mode noise while amplifying the difference between two inputs. The INA111 belongs to the broader instrumentation-amplifier family, which sits within amplifier ICs and analog signal-chain components used for bridge, current, pressure, temperature, and biomedical sensing.

The principal features of the INA111AUG4 include a 2 MHz gain bandwidth, FET inputs, a current-feedback topology, single-resistor gain selection, and laser-trimmed offset voltage and drift. The current-feedback architecture supports extended bandwidth at higher closed-loop gains and fast settling. One external gain resistor allows the same circuit to cover low-gain signal conditioning and gain values exceeding 1000, depending on application bandwidth requirements.

The INA111AUG4 is a single-amplifier device intended for precision differential measurement rather than general-purpose single-ended amplification. Its common-mode rejection improves measurement integrity when a sensor output is small relative to the voltage shared by both sensor terminals. Designers must still evaluate input common-mode range, output swing, supply voltage, gain-bandwidth distribution, resistor tolerance, and source impedance at the operating frequency.

Typical uses include bridge-transducer amplifiers, precision current sensing, laboratory instrumentation, medical monitoring, industrial sensor interfaces, and data-acquisition front ends. The device is particularly useful when a differential signal requires adjustable gain while retaining high speed and low input bias current. The SOIC package also supports conventional surface-mount assembly and compact analog circuit layouts.

For implementation, place the external gain resistor close to the gain-setting pin and route each input directly to minimize parasitic capacitance and pickup. Reference and power-ground paths should be planned so output-current return noise does not add directly to the input-referred signal. Confirm the usable bandwidth at the selected gain and verify the analog input limits against the supply rails.

This page combines the manufacturer product identity, distributor availability, package information, application guidance, comparison criteria, and design checks into an engineering-focused selection reference for the INA111AUG4.

Mga alternatibo na pwedeng ilagay na INA111AUG4 — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

Variante sa Seri na ito

Katulad na modelo sa serye na katugma sa pagpasok INA111AUG4 (parehas na form factor at footprint) — pagkakaiba sa Gain Range, Package, Product Type.

Texas Instruments
Gain Range: 1 to 1000
Package: 16-pin SOIC (DW)
Product Type: High-speed FET-input instrumentation amplifier
Ikabit sa INA111AUG4 →

INA111AUE4

✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo
📦 16-SOIC
Same INA111A 2 MHz current-feedback architecture and 16-SOIC footprint; ordering-code attributes require final manufacturer verification

📋 Alternatibo na Reference (hindi sa katalogo)

INA111AU

✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo
Texas Instruments
📦 16-SOIC
High-speed FET-input instrumentation amplifier · 1 circuit · 2 MHz · 17 V/us · 20 pA maximum · 500 uV maximum · 5 uV/C maximum · 106 dB minimum

Magkontak para sa presyo

Tingnan ang Datasheet →

INA111AIPWR

✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo
📦 16-SOIC
Same INA111A family and 16-SOIC footprint; ordering suffix and production attributes differ and require manufacturer verification

📋 Alternatibo na Reference (hindi sa katalogo)

INA111APWR

✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo
📦 16-SOIC
Same INA111A family and 16-SOIC footprint; ordering suffix and production attributes differ and require manufacturer verification

📋 Alternatibo na Reference (hindi sa katalogo)

INA111AUG4 Mga Pinakamataas na Rating at Electrical Characteristics

Product Type Instrumentation amplifier
Amplifier Circuit Count 1 circuit
Input Stage FET input
Topolohiya Current feedback
Gain Bandwidth 2 MHz
Gain Range 1 to over 1000
Settling Time 4 us to 0.01% at gain 100
Gain Setting 1 external resistor
Offset Voltage and Drift Laser trimmed
Packhaging 16-SOIC
Package Width 7.50 mm (0.295 in)
Uri ng Pagpapasok Surface mount

Gabay sa Pin Configuration ng INA111AUG4 7.50 mm (0.295 in)

Pin configuration para sa INA111AUG4 (7.50 mm (0.295 in) package). Ang analog component na ito ay may input, output, at power supply pins. Sumangguni sa datasheet ng manufacturer para sa offset null, compensation, at enable pin configurations. Perpekto para sa signal conditioning at amplifier circuits.

Pinout diagram ng 7.50 mm (0.295 in) package para sa INA111AUG4

Wala ng detalyadong pinout data na magagamit para sa INA111AUG4.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

INA111AUG4 ay nararapat para sa 6 aplikasyons: Bridge Transducer Signal Conditioning, Precision Current Sensing, Industrial Sensor Interface, Medical Monitoring Front End, Data Acquisition and Instrumentation, Audio and Low-Level Signal Amplification.

⚡

Bridge Transducer Signal Conditioning

The INA111AUG4 fits bridge-based pressure, load-cell, and strain measurements where the useful signal is small and differential. Its FET input minimizes loading of high-impedance sources, while the current-feedback amplifier and 2 MHz gain bandwidth support sensor systems that need more bandwidth than a slow precision-only amplifier provides. A single external gain resistor establishes a closed-loop gain from 1 to over 1000, allowing the same circuit family to cover millivolt-level signals and larger bridge spans. The 16-SOIC layout should place the gain resistor close to the device, while the bridge excitation and reference return should use quiet routing. Confirm bridge impedance, excitation voltage, common-mode voltage, and the required measurement bandwidth before selecting the resistor value.

⚡

Precision Current Sensing

INA111AUG4 can condition a differential current signal when the sensing element and amplifier share a suitable common-mode voltage. The 2 MHz gain bandwidth allows the front end to respond to fast current transients, while external gain selection supports sensitivity adjustment without a complex switched-gain network. Its differential architecture helps reject supply and ground disturbances that appear equally on both measurement inputs. In a shunt-based design, keep the Kelvin connection narrow and route it away from switching nodes. The external gain resistor should have suitable tolerance and low temperature drift when measurement accuracy matters. Before implementation, verify the amplifier's input and output ranges, quiescent behavior, source impedance, and the system's required common-mode rejection across frequency.

🏭

Industrial Sensor Interface

The INA111AUG4 is appropriate for industrial sensing front ends that amplify a differential sensor output while rejecting a substantial common-mode voltage. Its high-speed current-feedback implementation supports signal bandwidth beyond many precision instrumentation amplifiers, and the FET input stage helps preserve the output of high-impedance sensors. Engineers can set gain from 1 to over 1000 with one resistor, making the device useful across pressure, position, isolation-interface, and process-control signal chains. The 16-SOIC package is compatible with standard surface-mount assembly. Industrial implementations should include input transient protection, verified grounding, and separation between sensitive input traces and switching power or digital return paths. Check the actual sensor excitation and operating-temperature requirements against the device limits.

💊

Medical Monitoring Front End

INA111AUG4 can amplify low-level differential signals in biomedical monitoring equipment when the selected operating point satisfies the device's electrical limits. The FET input stage is useful with high-impedance sensing elements because it limits input bias-current loading, while differential amplification supports rejection of common-mode interference in electrode or sensor systems. Its 2 MHz bandwidth and 4 us settling to 0.01% at gain 100 provide useful response for dynamic physiological signals. The amplifier does not by itself satisfy medical-product safety or isolation requirements, so the complete circuit must include appropriate protection, leakage control, and qualification. Verify electrode voltage limits, input bias-current requirements, output headroom, patient protection, and applicable regulatory requirements before using this device in a medical path.

🖥️

Data Acquisition and Instrumentation

INA111AUG4 serves as an analog input stage in laboratory and data-acquisition systems that measure differential voltages over a broader frequency range than a slow DC-only amplifier may support. User-selectable gain from 1 to over 1000 allows the front end to normalize signals with widely different amplitudes, while the 2 MHz gain bandwidth preserves response for higher-frequency components. The current-feedback topology and 4 us settling to 0.01% at gain 100 are particularly relevant to stepped or multiplexed measurement systems. Use short input paths, a clean reference return, and a stable low-noise supply. The instrumentation amplifier must remain within its input common-mode and output voltage limits at every gain and signal condition, and system calibration should account for resistor tolerance, offset, and drift.

🎧

Audio and Low-Level Signal Amplification

INA111AUG4 is applicable when a small balanced audio or instrumentation signal requires differential gain and flexible gain selection rather than ordinary single-ended amplification. The current-feedback architecture provides a 2 MHz gain-bandwidth characteristic, while single-resistor gain setting from 1 to over 1000 allows the circuit to accommodate line-level and lower-level balanced signals. Its FET inputs are advantageous when the source has relatively high impedance. The amplifier does not itself provide audio output drive, so it is best used as a preamplifier or measurement stage ahead of a suitable line driver. Keep the input loop small, maintain symmetric routing where possible, and verify that the output swing remains within the selected supply. Feedback-network stability and gain-bandwidth interaction should also be checked against the required audio bandwidth.

What is the INA111AUG4?
The INA111AUG4 is a single-circuit, high-speed FET-input instrumentation amplifier from Texas Instruments in a 16-pin SOIC package. According to the manufacturer product page, it uses a current-feedback topology, supports externally selected gains from 1 to over 1000, and has a 2 MHz gain-bandwidth characteristic. It is intended for amplifying differential sensor signals while rejecting common-mode voltage.
What are the key specifications of INA111AUG4 that engineers should know?
The INA111AUG4 combines a 2 MHz gain bandwidth, FET input stage, current-feedback architecture, and single-resistor gain selection covering gains from 1 to over 1000. A comparison listing describes 4 us settling to 0.01% at a gain of 100. The device is offered in a 16-SOIC package and uses laser-trimmed offset voltage and drift, making it suitable for fast differential sensor-conditioning circuits.
What is the gain bandwidth of INA111AUG4?
The INA111AUG4 has a 2 MHz gain bandwidth. Texas Instruments describes the INA111 as a high-speed FET-input instrumentation amplifier using current feedback, which extends usable bandwidth at higher closed-loop gains. The usable bandwidth in a finished circuit also depends on the selected external gain resistor, source impedances, parasitic capacitance, and the required settling accuracy.
How do I set the gain of INA111AUG4?
The INA111AUG4 sets its closed-loop gain with one external resistor, allowing gain selections from 1 to more than 1000. The manufacturer product page identifies the single-resistor gain-setting method, while the device's current-feedback architecture supports operation at higher gains. Use the resistor value and gain equation from the INA111 datasheet, and verify the resulting bandwidth against the measurement bandwidth.
Where can I download the INA111AUG4 datasheet PDF?
The official INA111AUG4 documentation is available from the Texas Instruments INA111 product page at https://www.ti.com/product/INA111. That page provides the manufacturer datasheet, ordering information, and technical parameters. Use the manufacturer document for the complete pin descriptions, recommended application circuit, electrical limits, and gain-resistor selection because the distributor listings do not reproduce the full technical tables.
Where can I find the INA111AUG4 pinout?
The INA111AUG4 pinout is shown in the pin-configuration section of the official INA111 datasheet on the Texas Instruments product page. The device is a 16-SOIC package, so its schematic symbol and PCB footprint must follow the 16-pin numbering shown in that diagram. Do not infer unused or exposed-pin functions from a generic SOIC footprint; verify every connection against the manufacturer pin table.
Is INA111AUG4 suitable for bridge sensor measurements?
Yes, INA111AUG4 is well suited to bridge sensor measurements when the required bandwidth and input-range conditions are satisfied. Its differential input architecture, high-speed current-feedback operation, and externally adjustable gain from 1 to over 1000 support low-level transducer signals. Confirm the bridge excitation voltage, sensor output bandwidth, common-mode voltage, and required common-mode rejection before fixing the gain resistor.
What is the difference between INA111AUG4 and INA111AU?
Both devices belong to the Texas Instruments INA111A family and use a 16-pin SOIC package, but their ordering suffixes can identify different manufacturing, grade, or packaging configurations. The INA111AU is the related non-UG4 ordering code identified in an INA111AUG4 comparison result. Before substitution, compare the exact suffix definitions, temperature grade, marking, reel format, and lifecycle status in the manufacturer ordering information.
Can INA111AUE4 replace INA111AUG4?
INA111AUE4 is a closely related Texas Instruments INA111A ordering variant and is identified in a direct comparison with INA111AUG4. Its package family is the 16-pin SOIC used by the INA111A, but a drop-in decision still requires checking every ordering-code attribute, especially temperature grade, tape-and-reel orientation, device marking, and production status. Confirm those details in the manufacturer datasheet before releasing the substitution.
When should I choose INA111AUG4 over another instrumentation amplifier?
Choose INA111AUG4 when a differential sensor signal requires a FET-input instrumentation amplifier, adjustable gain from 1 to over 1000, and a high-speed current-feedback implementation. Its 2 MHz gain bandwidth and 4 us settling to 0.01% at gain 100 are useful for dynamic measurements. Select a different device when required input bias, supply voltage, common-mode range, precision, or qualification falls outside the INA111 operating envelope.
Is INA111AUG4 suitable for medical monitoring applications?
INA111AUG4 can be used as the analog front end of a medical monitoring system when the signal bandwidth, common-mode voltage, input protection, isolation, and applicable product qualification are satisfied. Its FET input reduces current loading of high-impedance sensors, while differential measurement helps reject common-mode interference. A medical design also requires system-level safety, leakage, electrode protection, and regulatory validation beyond the IC's basic electrical specifications.
Where can I buy INA111AUG4 online?
Use the Request a Quote form on this page to request INA111AUG4 availability, quantity pricing, and lead time for the exact Texas Instruments ordering code. The target is listed as available by multiple channels, but inventory changes continuously and should be confirmed for your required quantity and delivery schedule. The inquiry should identify INA111AUG4, the 16-SOIC package, and your acceptable reel or tray configuration.
What is the price of INA111AUG4?
Current INA111AUG4 pricing is generated through the Request a Quote form on this page so that quantity, packaging, and supply conditions can be handled consistently. The visible component listings indicate that the exact MPN is commercially available, but individual unit prices and stock quantities fluctuate. Submit the required quantity and target package configuration to obtain a current quotation.
What is the lead time for INA111AUG4?
The current lead time for INA111AUG4 should be requested through the Request a Quote form on this page. Distributor listings confirm market availability, but one listing states that its lead time is to be confirmed rather than committing to a delivery interval. Include your required quantity, date code preference, and approved packaging configuration in the request so the supplier can confirm the appropriate schedule.
Is INA111AUG4 in stock?
INA111AUG4 is shown as commercially available across multiple distributor listings, including one listing that reports thousands of pieces, but inventory is time-sensitive and should not be treated as a guaranteed allocation. Use the Request a Quote form on this page to confirm current stock for the exact 16-SOIC ordering code. Include your required quantity and date-code requirements to obtain a firm supply response.
What can replace INA111AUG4?
The closest confirmed replacements are the same-family Texas Instruments orderings INA111AU and INA111AUE4, both associated with the INA111A in 16-pin SOIC packaging. A true drop-in replacement must preserve the 16-pin footprint, electrical limits, gain-setting method, common-mode range, temperature grade, and device marking. Cross-brand choices are not listed because the available cross-reference results did not identify a verified compatible MPN.

Impormasyon ng Talumpati sa Engineering for INA111AUG4 — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose INA111AUG4 when the design needs a single-channel, high-speed differential instrumentation amplifier with a FET input, a 2 MHz gain-bandwidth characteristic, and gain adjustment from 1 to over 1000 using one resistor. It is especially suitable for bridge, current-sense, laboratory, and industrial sensor front ends where differential rejection and fast settling matter. The closely related INA111AUE4 and INA111AU orderings can be considered when their exact suffix, grade, marking, and reel configuration match the production requirement. Do not select them solely from package appearance. No cross-brand alternative is recommended because the cross-reference results did not name a candidate whose package, pinout, and electrical limits could be verified. For designs requiring very low offset, very high common-mode rejection, wider rails, or a different package, use the manufacturer selection guide to identify a device whose full operating envelope is known before making a drop-in substitution.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto INA111AUE4 INA111AU INA111AIPWR INA111APWR
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 16-SOIC 16-SOIC 16-SOIC 16-SOIC 16-SOIC
Product Type Instrumentation amplifier Instrumentation amplifier Instrumentation amplifier Instrumentation amplifier Instrumentation amplifier
Amplifier Circuit Count 1 circuit 1 circuit 1 circuit 1 circuit 1 circuit
Gain Bandwidth 2 MHz 2 MHz 2 MHz 2 MHz 2 MHz
Gain Range 1 to over 1000 1 to over 1000 1 to over 1000 1 to over 1000 1 to over 1000
Settling Time 4 us to 0.01% at gain 100 4 us to 0.01% at gain 100 4 us to 0.01% at gain 100 4 us to 0.01% at gain 100 4 us to 0.01% at gain 100
Input Stage FET input FET input FET input FET input FET input
Topology Current feedback Current feedback Current feedback Current feedback Current feedback
Gain Setting Method 1 external resistor 1 external resistor 1 external resistor 1 external resistor 1 external resistor

Pangunahing mga Pagkakaiba

  • High-speed current-feedback architecture (kumpara saINA111AU)
  • Single-resistor gain programming (kumpara saINA111AUE4)
  • FET input for high-impedance sources (kumpara saINA111APWR)
  • Fast settling at high gain (kumpara saINA111AIPWR)

Talaan ng Disenyo

Route the two differential inputs as a compact, symmetrical pair and connect them directly to the amplifier pins rather than sharing a long trace with other circuitry. Place the external gain resistor close to its designated package pin to minimize parasitic capacitance and susceptibility to interference. Keep the input loop small and maintain a continuous return path beneath the circuit. Because the package is a conventional 16-SOIC, confirm the exact manufacturer pin diagram before assigning the footprint.

Bandwidth and settling must be checked together at the selected closed-loop gain. The INA111AUG4 has a 2 MHz gain-bandwidth characteristic and is described as settling to 0.01% in 4 us at gain 100. Do not treat 2 MHz as the usable flat bandwidth at every gain; use the manufacturer gain and bandwidth curves for the final resistor value. Also evaluate source impedance, parasitic capacitance, and the sensor's own frequency response because these can alter both settling behavior and effective bandwidth.

Do not assume that the gain-setting resistor alone determines system accuracy. The external resistor tolerance and temperature coefficient contribute to gain error, while source imbalance can create additional differential input offset. Confirm that the sensor common-mode voltage remains inside the amplifier's operating range and that the output has adequate voltage swing at the selected supply and gain. A substitute ordering code may use the same 16-SOIC footprint while differing in grade, marking, or reel orientation, so verify those attributes before procurement.

Separate the sensitive input pair from switching-node copper, inductor connections, and high-current return paths. Use a quiet analog ground strategy and connect the sensor return to the amplifier ground at a controlled point rather than allowing input current to flow through the input reference trace. Place local supply bypass capacitance close to the device and keep its current loop compact. These measures prevent common-mode and supply disturbances from being converted into apparent differential signal at the sensor input.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

Compliance status was not stated in the manufacturer or distributor results and remains unknown. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status against the current manufacturer product documentation before release.

Data napatotohanan sa: 2026-11-19 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

INA111AUG4 datasheet INA111AUG4 pinout INA111AUG4 datasheet pdf INA111AUG4 equivalent INA111AUG4 replacement INA111AUG4 price INA111AUG4 stock Texas Instruments INA111AUG4 INA111AUG4 16-SOIC pinout INA111AUG4 bridge sensor amplifier INA111AUG4 vs INA111AU INA111AUG4 2 MHz gain bandwidth

Mga kaugnay na Mga Komponente at mga Tuntunin

Texas Instruments INA111AUG4 INA111AUE4 INA111AU INA111AIPWR INA111APWR instrumentation amplifier differential amplifier analog signal chain amplifier IC FET input current-feedback topology 2 MHz gain bandwidth common-mode rejection 16-SOIC package surface-mount technology bridge transducer current sensing industrial sensor interface medical monitoring data acquisition gain-setting resistor laser-trimmed offset RoHS REACH
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ