Texas Instruments

INA128UG4 - Low-Power Instrumentation Amplifier | TI

MPN: INA128UG4 ✓ Nakahanda
10 uV Vdss 700 uA Id 8-pin SOIC, 3.90 mm body width Package
MOQ: 1 |

INA128UG4 Ulas

Texas Instruments INA128UG4 is a precision, low-power instrumentation amplifier with 130 dB CMRR, 700 uA quiescent current, and a 1.3 MHz gain-bandwidth product in an 8-pin SOIC package. It is designed for low-level differential measurements where common-mode rejection, low offset voltage, and low input noise are more important than high-bandwidth signal processing. The device operates from ±2.25 V to ±18 V and supports a typical dual-supply configuration of ±15 V.

An instrumentation amplifier is a specialized analog amplifier that measures the voltage difference between two inputs while rejecting large signals common to both inputs. Its internal three-amplifier topology provides high input impedance, accurate differential gain, and flexible gain selection through an external gain-setting resistor. The INA128 belongs to the broader precision-amplifier hierarchy and is commonly used with resistive sensors, strain gauges, bridge transducers, and high-impedance analog front ends.

The INA128UG4 combines 130 dB CMRR with approximately 10 uV input offset voltage and 8 nV/sqrt(Hz) input noise. Its 700 uA supply current supports battery-powered and portable measurement systems where amplifier power consumption directly affects operating time. A 1.3 MHz bandwidth enables useful signal bandwidth, while a typical slew rate of 4 V/us supports accurate response to changing differential inputs. An external resistor on the gain-setting pins provides the gain relationship used for sensor conditioning.

The device uses a precision internal architecture that is effective in systems where unwanted common-mode voltage can be substantially larger than the differential signal of interest. Its low noise and high CMRR reduce errors in bridge-based measurements, while the SOIC-8 package simplifies assembly in conventional surface-mount designs. Operation from ±2.25 V to ±18 V allows use with dual low-voltage rails or higher-voltage analog supplies, subject to the absolute maximum ratings in the manufacturer datasheet.

Typical applications include weighing systems, industrial pressure and flow measurement, biomedical instrumentation, current-shunt monitoring, and laboratory sensor interfaces. In a bridge circuit, the amplifier can reject supply variation and large common-mode voltage while preserving the small differential output generated by the sensing element. The 700 uA quiescent current is particularly useful in portable equipment where each milliamp of supply demand can materially shorten battery life.

The principal design consideration is resistor selection for the gain-setting network. Use stable, low-temperature-coefficient resistors and place them close to the relevant device pins to minimize added noise and parasitic resistance. Confirm common-mode range, output swing, supply current, and input bias behavior against the operating conditions before committing to a high-gain configuration.

This page combines manufacturer specifications, package and pin information, sourcing guidance, parameter comparisons, and practical circuit-design notes. It also distinguishes confirmed pin-compatible alternatives from options that require additional electrical validation before production substitution.

Mga alternatibo na pwedeng ilagay na INA128UG4 — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

Variante sa Seri na ito

Katulad na modelo sa serye na katugma sa pagpasok INA128UG4 (parehas na form factor at footprint) — pagkakaiba sa Package, Common-Mode Rejection Ratio, Input Offset Voltage, Operating Temperature Range, Supply Voltage Range.

Texas Instruments
Package: 8-pin SOIC
Operating Temperature Range: -40°C to +85°C
Ikabit sa INA128UG4 →
Texas Instruments
Package: 8-pin SOIC (D)
Common-Mode Rejection Ratio: 120 dB minimum
Input Offset Voltage: 50 µV maximum
Ikabit sa INA128UG4 →

INA129U

✅ Drop-In
Texas Instruments
📦 8-SOIC
Precision, low-power instrumentation amplifier · Three-op-amp instrumentation amplifier · ±2.25 V to ±18 V · ±18 V · 1.3 MHz · 200 kHz · 50 µV · 0.5 µV/°C

Magkontak para sa presyo

Tingnan ang Datasheet →

INA129UA

✅ Drop-In
Texas Instruments
📦 8-SOIC
Precision instrumentation amplifier · 1 circuit · 50 µV maximum · 0.5 µV/°C maximum · 5 nA maximum · 120 dB minimum · ±40 V · ±18 V maximum

Magkontak para sa presyo

Tingnan ang Datasheet →

INA128UG4 Mga Pinakamataas na Rating at Electrical Characteristics

Amplifier Type Precision instrumentation amplifier
Number of Circuits 1 circuit
Common-Mode Rejection Ratio 130 dB
Kuru-kuryente ng Kapayapaan 700 uA
Gain-Bandwidth Product 1.3 MHz
Input Offset Voltage 10 uV
Input Noise Density 8 nV/sqrt(Hz)
Slew Rate 4 V/us
Supply Voltage Range ±2.25 V to ±18 V
Typical Supply Voltage ±15 V
Packhaging 8-pin SOIC, 3.90 mm body width
Uri ng Pagpapasok Surface mount
Bilang ng Pins 8 pins
Gain Configuration External gain-setting resistor
Input Type Differential
Product Description Precision, low-power instrumentation amplifier

Pin Configuration ng INA128UG4

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
Pin 1 RG — Gain-setting resistor connection
Pin 2 IN- — Inverting input
Pin 3 IN+ — Non-inverting input
Pin 4 V- — Negative supply connection
Pin 5 REF — Reference voltage input
Pin 6 OUT — Amplified output
Pin 7 VS+ — Positive supply connection
Pin 8 RG — Gain-setting resistor connection

Tipikal na mga Gamit

INA128UG4 ay nararapat para sa 7 aplikasyons: Strain-Gauge Bridge Measurement, Battery-Powered Sensor Interface, Industrial Pressure Transducer Interface, Precision Current-Shunt Monitor, Biomedical and Diagnostic Instrumentation, Laboratory Measurement Front End, Audio and Analog Measurement Interface.

🏭

Strain-Gauge Bridge Measurement

The INA128UG4 is appropriate for low-level strain-gauge bridges because its 130 dB CMRR suppresses supply and ground-related common-mode signals while its 10 uV offset and 8 nV/sqrt(Hz) noise help preserve small differential outputs. Place the amplifier across the bridge output and use a precision gain-setting resistor to establish the required differential gain. The 700 uA quiescent current also helps portable test systems conserve power. Confirm the bridge excitation, common-mode voltage, resistor tolerance, and output swing before applying gain.

📱

Battery-Powered Sensor Interface

The INA128UG4 fits battery-powered sensor interfaces because its 700 uA quiescent current limits continuous amplifier demand while the 1.3 MHz bandwidth provides useful signal capacity for many slow-to-moderate sensor signals. The differential input arrangement rejects common-mode voltage generated by shared sensor returns or supply disturbances. Operation from ±2.25 V to ±18 V supports multiple rail architectures. Battery-life calculations should include the sensor, reference, gain resistor, and any output-conversion circuitry in addition to the amplifier itself.

🏭

Industrial Pressure Transducer Interface

For industrial pressure or displacement transducers, the INA128UG4 can amplify a small differential output while rejecting the larger common-mode voltage present at the sensor terminals. Its 130 dB CMRR improves rejection of interference common to both inputs, while the 8 nV/sqrt(Hz) noise density supports low-level signal chains. Use the external gain resistor close to the device and verify that the selected supply rails maintain the transducer output within the amplifier’s input and output ranges. Shielded routing and a clean ground reference remain important in long cable systems.

⚡

Precision Current-Shunt Monitor

The INA128UG4 is suitable for monitoring current through a shunt resistor when the voltage of interest is differential and small. The instrumentation-amplifier architecture reduces dependence on exact common-mode voltage, while 10 uV input offset and 8 nV/sqrt(Hz) input noise support accurate measurements of low shunt drops. The 1.3 MHz gain-bandwidth product gives adequate bandwidth for many power-monitoring applications. Check Kelvin connections, shunt dissipation, amplifier output swing, and whether the selected gain introduces excessive bandwidth or noise amplification.

💊

Biomedical and Diagnostic Instrumentation

The low-noise, high-CMRR characteristics of the INA128UG4 make it suitable for biomedical front ends that measure small differential signals superimposed on larger physiological or electrode common-mode voltages. Its 700 uA quiescent current supports portable acquisition systems, and the SOIC-8 package simplifies compact analog boards. For patient-connected equipment, verify applicable isolation, leakage, electrode protection, and safety requirements separately. The amplifier itself does not replace the input protection, isolation, filtering, and system-level validation required in medical products.

🔧

Laboratory Measurement Front End

The INA128UG4 can form the input stage of a precision laboratory measurement system when the source produces a differential signal and high common-mode rejection is valuable. The 130 dB CMRR reduces errors from shared ground potential, while 10 uV offset and 8 nV/sqrt(Hz) noise support low-level measurements. Its dual-supply capability accommodates classic ±15 V laboratory architectures as well as lower-voltage systems. Select the gain carefully to keep the output within its swing limits and use a low-noise reference arrangement for accurate unipolar measurements.

🎧

Audio and Analog Measurement Interface

The INA128UG4 can serve as a low-noise differential input stage for audio and general analog measurement circuits where common-mode interference must be rejected. Its 8 nV/sqrt(Hz) input noise and 130 dB CMRR help preserve small signal information, while the 1.3 MHz bandwidth covers a useful portion of the audio range. Use the reference pin for midpoint bias in single-supply systems and confirm output headroom. Input protection and filtering should be selected according to the source impedance, cable length, and expected transient levels.

What is the INA128UG4?
The INA128UG4 is a precision, low-power, single-circuit instrumentation amplifier in an 8-pin SOIC package. According to the Texas Instruments INA128 product page, it provides 130 dB CMRR, consumes 700 uA of quiescent current, and is intended for low-level differential measurements. Its three-amplifier architecture rejects common-mode noise while preserving small differential sensor signals.
What are the key specifications of INA128UG4 that engineers should know?
The INA128UG4 combines 130 dB CMRR, 10 uV input offset voltage, 8 nV/sqrt(Hz) input noise, 1.3 MHz gain-bandwidth product, and 700 uA quiescent current. According to the Texas Instruments product page and manufacturer datasheet, it operates across ±2.25 V to ±18 V and is packaged in an 8-pin SOIC for surface-mount instrumentation circuits.
Where can I download the INA128UG4 datasheet PDF?
The official INA128UG4 datasheet is available through the Texas Instruments INA128 product page at https://www.ti.com/product/INA128. Select the datasheet link in the product documentation section. This manufacturer-hosted document should be used for final pin assignments, absolute maximum ratings, electrical characteristics, and recommended application circuits.
Where can I find the INA128UG4 pinout?
The INA128UG4 pinout is shown in the Texas Instruments INA128 manufacturer datasheet and corresponds to the 8-pin SOIC connection diagram. Use the pin-description table when assigning differential inputs, supply rails, reference voltage, output, and gain-setting pins. The sequence used here is 1 RG, 2 IN−, 3 IN+, 4 V−, 5 REF, 6 OUT, 7 VS+, and 8 RG.
How much current does the INA128UG4 consume?
The INA128UG4 has a typical quiescent current of 700 uA. According to the Texas Instruments INA128 product page, this low supply demand makes the device suitable for portable and battery-powered measurement systems. The application should also account for output-current demand, reference-network loading, and the power consumed by the external gain-setting resistor.
What supply voltage range does the INA128UG4 support?
The INA128UG4 operates from ±2.25 V to ±18 V, corresponding to a total supply span from 4.5 V to 36 V. The Texas Instruments INA128 product page identifies ±15 V as a typical dual-supply condition. The selected rails must also preserve adequate input common-mode range and output voltage swing.
Is INA128UG4 suitable for low-level sensor measurement?
Yes, the INA128UG4 is suitable for low-level differential sensor measurements because it combines 130 dB CMRR, 10 uV input offset voltage, and 8 nV/sqrt(Hz) input noise. According to the Texas Instruments manufacturer datasheet, these characteristics support bridge, shunt, and other precision front-end designs where common-mode voltage is much larger than the wanted differential signal.
Can INA129U replace the INA128UG4?
INA129U is a documented comparison candidate for INA128UG4, but production substitution still requires checking the full INA129 datasheet against the INA128 requirements. The candidate comparison confirms a relationship between the devices, while the target’s 8-SOIC format must also be confirmed against the selected INA129 orderable package. Review gain, CMRR, offset, noise, supply range, and pin functions before approval.
What is the best Analog Devices equivalent for INA128UG4?
Analog Devices INA129UA is the cross-brand candidate identified for INA128UG4. According to the cross-reference comparison material, both devices are considered in replacement searches, but an engineering release still requires confirmation of the exact 8-pin package, pin functions, gain network, supply range, CMRR, offset, and noise. Use the Request a Quote form on this page to confirm sourcing of the selected MPN.
When should I choose INA128UG4 instead of INA129U?
Choose INA128UG4 when the design specifically targets the INA128 family’s 130 dB CMRR, 700 uA quiescent current, and established external gain network. Choose INA129U when its datasheet provides a better match for gain range, input range, bandwidth, or supply requirement while retaining the same SOIC footprint. The decision should be based on a complete electrical comparison rather than package similarity alone.
Is INA128UG4 the same as INA129UA?
No. INA128UG4 and INA129UA belong to different instrumentation-amplifier families, so they should not be treated as identical devices. INA129UA appears in the documented cross-reference results, but its electrical and pin-function differences must be checked against the INA128 design. Confirm common-mode range, gain implementation, output swing, reference behavior, and supply requirements before replacement.
What can replace INA128UG4?
INA129U and Analog Devices INA129UA are the named replacement candidates found for INA128UG4. Both are associated with documented replacement comparisons, but candidate status alone does not prove drop-in equivalence. Before substitution, verify the exact package pinout, gain-setting method, input common-mode range, offset, noise, CMRR, bandwidth, and operating supply range in each manufacturer datasheet.
Where can I buy INA128UG4 online?
Use the Request a Quote form on this XAIPART product page to request INA128UG4 pricing, current availability, lead time, and order quantity. Because inventory and commercial terms can change, submit the exact MPN INA128UG4 and required quantity with the request. This also lets the buyer confirm the 8-pin SOIC package and reel or tray handling requirements.
What is the price of INA128UG4?
The current commercial quote for INA128UG4 is available through the Request a Quote form on this page. No static unit price should be used for planning because quantities and market conditions change. Submit the exact MPN, required quantity, and target package form so the returned quotation reflects the current order configuration.
What is the lead time for INA128UG4?
Current lead time and minimum order quantity for INA128UG4 should be confirmed through the Request a Quote form on this page. Include the required quantity, reel quantity, target date, and shipment destination in the request. Texas Instruments identifies INA128 as an active product, but manufacturing and inventory availability can vary by order quantity and date.
Is INA128UG4 in stock?
Current INA128UG4 stock status is handled through the Request a Quote form on this page. The exact MPN, required quantity, and preferred packaging form should be included with the request so inventory can be matched to the intended production build. Treat a successful quotation response rather than a general catalog indication as the purchasing commitment.
Does INA128UG4 meet RoHS and REACH requirements?
The RoHS and REACH status for INA128UG4 is not explicitly stated in the technical material used for this page. Request the current manufacturer compliance declaration for the exact orderable MPN before making a compliance claim. For finished-goods documentation, also confirm the assembly, soldering materials, and any applicable regional customer requirements with the supplier.

Impormasyon ng Talumpati sa Engineering for INA128UG4 — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose the INA128UG4 when a new design requires a precision, low-power instrumentation amplifier with 130 dB CMRR, 10 uV offset, 8 nV/sqrt(Hz) input noise, and 700 uA quiescent current in an 8-SOIC package. It is particularly suitable for bridge sensors, low-level shunt monitoring, portable instruments, and laboratory front ends where common-mode rejection and low power are priorities. Consider INA129U when its gain range, input-range behavior, bandwidth, or supply characteristics provide a better match, but validate the INA128-specific design assumptions. Consider Analog Devices INA129UA when a cross-brand procurement path is desirable, subject to careful verification of the pinout, gain network, electrical limits, and lifecycle requirements. A PCB redesign is not assumed for these candidates because they are presented as 8-SOIC options, but final approval must follow a manufacturer-datasheet comparison and application-level test.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto INA129U INA129UA
Package 8-SOIC 8-SOIC 8-SOIC
Brand Texas Instruments Texas Instruments Analog Devices

Pangunahing mga Pagkakaiba

  • Higher documented common-mode rejection (kumpara saINA129U)
  • Low quiescent current for portable measurement (kumpara saINA129UA)
  • Defined low-noise input performance (kumpara saINA129UA)

Talaan ng Disenyo

Route the INA128UG4 differential inputs as a compact, symmetric pair and connect the two inputs to the sensor or shunt through matched paths where practical. Keep the gain-setting resistor close to the gain pins because its resistance and associated parasitic capacitance affect gain accuracy and bandwidth. Connect the reference pin to a low-impedance reference or midpoint network, and avoid routing sensitive input traces near the output and supply nodes.

Check output swing, common-mode range, and supply headroom at the minimum and maximum operating conditions. A low quiescent current of 700 uA does not remove the need for supply decoupling, particularly when the amplifier drives downstream capacitance. Place the manufacturer-recommended input and output capacitors close to their pins and verify that the selected reference network does not consume unnecessary supply current.

Do not treat INA129U or INA129UA as automatic replacements merely because they use an 8-pin SOIC package. Confirm pin functions, gain-setting requirements, common-mode range, output swing, offset, noise, CMRR, bandwidth, and supply ratings against the manufacturer datasheets. Also account for component tolerances, sensor excitation drift, and reference-voltage accuracy when calculating end-to-end measurement error.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

The available product and comparison pages do not explicitly establish the full compliance status of the exact INA128UG4 orderable MPN. Obtain the current manufacturer declaration for production qualification.

Data napatotohanan sa: 2026-11-09 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

INA128UG4 datasheet INA128UG4 datasheet pdf INA128UG4 pinout INA128UG4 equivalent INA128UG4 replacement INA128UG4 cross reference INA128UG4 vs INA129U INA128UG4 vs INA129UA INA128UG4 8-SOIC footprint INA128UG4 130 dB CMRR INA128UG4 700 uA INA128UG4 instrumentation amplifier application Texas Instruments INA128UG4 INA128UG4 price INA128UG4 stock

Mga kaugnay na Mga Komponente at mga Tuntunin

Texas Instruments INA128UG4 INA129U INA129UA Analog Devices precision instrumentation amplifier instrumentation amplifier differential amplifier amplifier IC analog signal conditioning common-mode rejection ratio CMRR input offset voltage input noise density gain-bandwidth product quiescent current slew rate external gain-setting resistor bridge transducer strain gauge current shunt 8-SOIC SOIC family surface-mount package RoHS REACH
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ