Texas Instruments

INA2126PA - Dual 36V Micropower Instrumentation Amplifier | Texas Instruments

MPN: INA2126PA ✓ Nakahanda
±1.35 V to ±18 V Vdss 175 μA per channel Id 16-pin PDIP Package
MOQ: 1 |

INA2126PA Ulas

The Texas Instruments INA2126PA is a dual-channel precision instrumentation amplifier designed for accurate, low-noise differential-signal acquisition. The device operates from a wide ±1.35 V to ±18 V supply range, consumes approximately 175 μA per channel, and provides a 16-pin PDIP package for through-hole PCB designs. Its two-amplifier architecture is intended to amplify small differential signals while rejecting common-mode interference in sensor, measurement, and portable instrumentation systems.

An instrumentation amplifier is a specialized amplifier category used for differential measurement. Its internal signal path amplifies the difference between two inputs while providing high common-mode rejection, making it more suitable for bridge sensors, current loops, and low-level analog front ends than a general-purpose operational amplifier. The INA2126 belongs to the INAx126 family of precision instrumentation amplifiers, combining low power consumption with accurate signal conditioning.

Key characteristics include a 250 μV offset specification, low quiescent current, a wide operating voltage range, and a bandwidth of approximately 200 kHz according to the product listing. The dual configuration provides two independent amplifier channels in one package, reducing component count on multi-axis or multi-sensor boards. The instrument amplifier category is part of the broader linear amplifier hierarchy and ultimately belongs to the analog integrated-circuit and signal-conditioning ecosystem.

The INA2126PA is suitable for portable instrumentation, sensor-interface circuits, battery-powered measurement equipment, industrial process monitoring, and precision data-acquisition systems. Its low 175 μA per-channel current makes it useful when battery life and thermal performance are important. The wide supply range also supports systems operating from low-voltage portable rails or higher-voltage industrial analog rails.

Designers should pay attention to input common-mode range, output swing, gain-setting resistor selection, bypass-capacitor placement, and the effects of source impedance when using precision instrumentation amplifiers. The dual package provides an opportunity to place two channels close together, but differential routing must minimize noise pickup and maintain a consistent ground reference. Use the manufacturer datasheet for the complete electrical characteristics and pin configuration before laying out a new PCB.

This product page combines the INA2126PA device specifications, sourcing information, verified drop-in alternatives, comparison parameters, and practical design guidance to support faster component selection and implementation.

Mga alternatibo na pwedeng ilagay na INA2126PA — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

Variante sa Seri na ito

Katulad na modelo sa serye na katugma sa pagpasok INA2126PA (parehas na form factor at footprint) — pagkakaiba sa Package, Quiescent Current, Architecture, Product Type, Input Type.

Texas Instruments
Package: 8-pin PDIP
Quiescent Current: 700 µA
Architecture: Three-op-amp instrumentation amplifier
Ikabit sa INA2126PA →
Texas Instruments
Package: 16-PDIP
Quiescent Current: 175 µA/channel
Product Type: Precision instrumentation amplifier
Ikabit sa INA2126PA →

INA128PA

✅ Drop-In
Texas Instruments
📦 16-pin PDIP
Precision instrumentation amplifier · Three-op-amp instrumentation amplifier · 1 circuit · 8-pin PDIP · 130 dB · 120 dB · 700 µA · 50 µV

Magkontak para sa presyo

Tingnan ang Datasheet →

INA2126PA Mga Pinakamataas na Rating at Electrical Characteristics

Product Type Dual precision instrumentation amplifier
Number of Channels 2 channels
Supply Voltage Range ±1.35 V to ±18 V
Maximum Supply Voltage 36 V
Kuru-kuryente ng Kapayapaan 175 μA per channel
Offset Voltage 250 μV
Gain-Bandwidth Product 200 kHz
Input Type Differential input
Architecture Two-op-amp instrumentation amplifier
Packhaging 16-pin PDIP
Package Type Through-hole PDIP
Uri ng Pagpapasok Through-hole
Application Category Precision differential-signal acquisition
Portable Operation Supported by low quiescent current

Gabay sa Pin Configuration ng INA2126PA through-hole pdip

Pin configuration para sa INA2126PA (through-hole pdip package). Ang analog component na ito ay may input, output, at power supply pins. Sumangguni sa datasheet ng manufacturer para sa offset null, compensation, at enable pin configurations. Perpekto para sa signal conditioning at amplifier circuits.

Pinout diagram ng through-hole pdip package para sa INA2126PA

Wala ng detalyadong pinout data na magagamit para sa INA2126PA.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

INA2126PA ay nararapat para sa 6 aplikasyons: Portable Sensor Acquisition, Bridge Sensor Interface, Battery-Powered Data Acquisition, Process Monitoring, Precision Data Acquisition, Instrumentation and Test Equipment.

📱

Portable Sensor Acquisition

The INA2126PA fits portable sensor acquisition because its 175 μA per-channel quiescent current limits amplifier contribution to battery drain, while the dual configuration supports two independent measurement channels in one 16-pin PDIP package. Its ±1.35 V to ±18 V operating range allows use with low-voltage portable rails and higher-voltage instrumentation systems. Differential inputs help reject common-mode pickup from sensors and long PCB traces. The result is a compact analog front end for handheld meters, portable environmental monitors, and field-test equipment. Design around the manufacturer datasheet limits for input common-mode voltage, output swing, gain resistors, and supply bypassing.

🏭

Bridge Sensor Interface

The INA2126PA is suitable for bridge-sensor front ends that require a differential measurement and low amplifier power consumption. The two-op-amp architecture measures the imbalance between bridge nodes while its instrumentation-amplifier topology addresses common-mode voltage present on both inputs. Two channels can serve paired bridges, load cells, or related sensing elements without adding separate amplifier packages. Its 250 μV offset specification is relevant to low-level millivolt-scale outputs, although actual system error also depends on bridge excitation, resistor tolerance, and ADC resolution.

⚡

Battery-Powered Data Acquisition

The INA2126PA supports battery-powered data-acquisition systems where every milliampere affects operating time. Its 175 μA per-channel current allows the dual amplifier to condition two low-level channels without consuming the power associated with higher-current general-purpose amplifiers. The wide supply range of ±1.35 V to ±18 V provides flexibility between compact low-voltage designs and higher-voltage industrial interfaces. Use the part for current-loop sensors, strain-gauge conditioning, and low-level analog monitoring. Validate total system energy use, shutdown behavior, capacitor leakage, and sensor excitation requirements during the power-budget calculation.

🏭

Process Monitoring

The INA2126PA can condition differential process signals when low power and channel density are important. Industrial monitoring systems often combine sensors located far from the controller, where common-mode noise and ground differences can contaminate the measurement. The dedicated instrumentation-amplifier architecture is intended to amplify the desired difference between input terminals rather than either input referenced to ground. Two channels support redundant or complementary measurements within one package. Confirm the input common-mode range, output swing, and isolation strategy for each process signal, and follow the manufacturer datasheet when selecting external gain and filtering components.

🖥️

Precision Data Acquisition

The INA2126PA suits precision data-acquisition front ends that need low-noise differential amplification before an ADC. Its 250 μV offset and 200 kHz bandwidth provide useful starting points for many low-frequency or moderate-bandwidth measurements, while the dual architecture permits synchronized or complementary channel acquisition. Place both channels near the connector or sensor interface and keep differential traces short, matched, and referenced to a clean ground plan. Select gain with suitable resistor accuracy and verify source-imbalance effects using the manufacturer guidance. These practices help preserve the instrumentation amplifier's common-mode rejection and noise performance.

🔧

Instrumentation and Test Equipment

The INA2126PA is appropriate for compact instrumentation and test equipment requiring two low-power differential measurement channels. It can condition outputs from pressure, temperature, current, and resistive sensors before conversion or control circuitry. The through-hole 16-pin PDIP package can simplify assembly in laboratory devices, educational instruments, and maintenance equipment where manual insertion and rework are useful. Because instrumentation accuracy depends on the entire analog chain, check gain-resistor tolerance, reference stability, input filtering, and grounding. Use the manufacturer pin configuration and typical application circuits as the basis for board construction.

Buod ng mga Inirekomendang Produkto

INA2126 Family-level precision instrumentation amplifier Ginagamit sa: Portable Sensor Acquisition, Bridge Sensor Interface, Battery-Powered Data Acquisition, Process Monitoring, Precision Data Acquisition, Instrumentation and Test Equipment
What is the INA2126PA instrumentation amplifier?
The INA2126PA is a dual-channel precision instrumentation amplifier from Texas Instruments for low-noise differential-signal acquisition. According to the Texas Instruments INAx126 datasheet, the INA2126 family uses a two-op-amp architecture, consumes 175 μA per channel, and operates across a ±1.35 V to ±18 V supply range. The PA orderable is supplied in a 16-pin PDIP package for through-hole PCB layouts.
What are the key specifications of INA2126PA that engineers should know?
The INA2126PA combines two precision instrumentation-amplifier channels, a 175 μA per-channel quiescent current, 250 μV offset, and approximately 200 kHz bandwidth in a 16-pin PDIP package. Texas Instruments identifies the device as a 36 V micropower dual instrumentation amplifier. These figures position it for low-level, battery-powered differential measurements where dual-channel consolidation and low supply current are valuable.
What supply voltage does INA2126PA require?
The INA2126PA operates from ±1.35 V to ±18 V, corresponding to a total supply span of 2.7 V to 36 V. According to the Texas Instruments INAx126 datasheet, this wide range supports portable low-voltage systems as well as higher-voltage industrial instrumentation. The exact positive and negative rails must also satisfy the input common-mode and output-swing limits for the selected gain.
How much current does INA2126PA consume?
The INA2126PA consumes approximately 175 μA per channel, as stated in the Texas Instruments INAx126 family description. Because the product contains two amplifier channels, engineers should evaluate total supply demand in the complete circuit rather than treating the per-channel figure as the device-wide total. External gain resistors, sensor excitation, and protection components may add further current beyond the amplifier itself.
Where can I download the INA2126PA datasheet PDF?
The manufacturer datasheet is available through Texas Instruments at https://www.ti.com/lit/gpn/INA2126. It is the primary document for the INA2126 and INA126 family, including electrical characteristics, gain equations, typical application circuits, and package information. Use that document to confirm pin functions, common-mode limits, output swing, and ordering details for the INA2126PA.
Where can I find the INA2126PA pinout?
The INA2126PA pin configuration is shown in the pin-configuration section of the Texas Instruments INAx126 datasheet at https://www.ti.com/lit/gpn/INA2126. The device uses a 16-pin PDIP package. Assign PCB connections directly from the manufacturer pin table so that supply pins, gain resistors, input terminals, and output terminals are connected according to the package orientation.
Is the INA2126PA suitable for battery-powered instrumentation?
Yes, the INA2126PA is suitable for battery-powered instrumentation because its 175 μA per-channel quiescent current is designed for low-power operation. Its dual-channel architecture can also reduce board area when two sensor channels are required. The complete power budget should include sensor current, gain-resistor loading, output-signal stages, and any protection circuitry, particularly in designs operating near the lower supply-voltage limit.
What is INA2126PA used for?
The INA2126PA is used to amplify small differential signals while rejecting common-mode noise. Typical applications include bridge sensors, portable measurement systems, battery-powered sensor interfaces, process monitoring, and precision data acquisition. Texas Instruments describes the INAx126 family as suitable for portable instrumentation and data-acquisition systems because of its low quiescent current and wide operating-voltage range.
What can replace the INA2126PA?
A true replacement must use the same 16-pin PDIP footprint, preserve pin-to-pin connections, and remain within the INA2126PA electrical limits of ±1.35 V to ±18 V and 175 μA per channel. No verified same-package substitute was established from the available cross-reference results. The INA2126UA is electrically similar but uses an SOIC package, so it is not a drop-in replacement without changing the PCB footprint.
Can INA2126UA replace INA2126PA?
No, INA2126UA cannot directly replace INA2126PA on the same PCB because INA2126UA uses a surface-mount SOIC package while INA2126PA uses a 16-pin PDIP through-hole package. Although both are described as functionally similar instrumentation amplifiers, changing package type requires a board-layout and assembly-process change. Treat them as functionally related options, not strict drop-in equivalents.
When should I choose INA2126PA over a general-purpose op amp?
Choose the INA2126PA when the design must amplify a differential sensor signal and suppress common-mode interference, particularly in a dual-channel or low-power system. Its dedicated two-op-amp architecture, 175 μA per-channel current, and instrumentation-amplifier common-mode rejection provide a more focused solution than a general-purpose op amp configured with a discrete difference amplifier. Verify gain, common-mode range, and output swing before finalizing the choice.
When should I choose INA2126PA over INA2126UA?
Choose INA2126PA when the board uses a through-hole 16-pin PDIP footprint or when a mechanically compatible replacement is required for an existing design. Choose INA2126UA when the board uses its surface-mount SOIC footprint and supports the associated land pattern. Although the amplifier functions are closely related, package construction is the decisive replacement difference.
Is INA2126PA suitable for precision sensor measurement?
Yes, the INA2126PA is intended for precision differential-signal acquisition and includes a 250 μV offset specification. It is suitable for low-level sensor interfaces where common-mode rejection and low quiescent current matter. Final measurement accuracy also depends on gain resistor tolerance, source impedance matching, input protection, reference accuracy, and the output ADC or sensor interface.
Where to buy INA2126PA online?
Use the Request a Quote form on this page to request current INA2126PA availability, quantity pricing, and delivery information. The form provides a direct purchasing channel for the exact 16-pin PDIP orderable, avoiding confusion with the surface-mount INA2126UA or other INAx126 package variants. Confirm the requested suffix, tube packaging, and production quantity with the supplier before ordering.
What is the price of INA2126PA?
Current INA2126PA pricing is shown through the Request a Quote form on this page. The structured price section is empty because no listing with an explicit quantity-break table for the exact INA2126PA suffix was available. Submit the required quantity and delivery details to obtain a current quotation for the 16-pin PDIP device rather than a package-variant estimate.
What is the lead time for INA2126PA?
Current lead time and stock status for INA2126PA should be confirmed through the Request a Quote form on this page. Lead time can vary with order quantity, manufacturing status, and packaging requirements, so a current quotation is more reliable than a historical listing. Specify the required tube quantity, shipment destination, and target date when requesting the quotation.
Is INA2126PA in stock?
The current INA2126PA stock position should be confirmed through the Request a Quote form on this page. The product page does not use distributor availability as proof that the exact 16-pin PDIP orderable is immediately available. A stock response tied to your quantity and delivery location prevents accidental substitution with the surface-mount INA2126UA variant.

Impormasyon ng Talumpati sa Engineering for INA2126PA — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose the INA2126PA for a new through-hole design that requires two low-power precision differential measurement channels, especially when battery life, common-mode rejection, and consolidated analog conditioning are priorities. Its 175 μA per-channel current, ±1.35 V to ±18 V supply range, and 16-pin PDIP package make it appropriate for portable instrumentation and industrial measurement boards. The INA2126UA is functionally similar but uses a surface-mount SOIC package, so it is preferable only when the PCB uses that footprint; it is not a direct replacement for an existing PDIP design. No verified same-package drop-in substitute was established, meaning a second-source requirement should be resolved by reviewing manufacturer pin-compatible options rather than assuming another INAx126 orderable has the same footprint. Before selecting the device, verify input common-mode range, output swing, gain equation, source-imbalance behavior, and the noise contributed by external gain resistors.

Talaan ng Disenyo

Place input, output, and supply bypass components close to their associated INA2126PA pins. Keep each differential input pair short, symmetric, and routed over a continuous ground plane. The two amplifier channels should use matched routing because unequal input impedance and trace capacitance can degrade common-mode rejection and offset balance. Use the manufacturer pin-configuration drawing and typical application circuit to establish the exact connections before PCB routing.

Do not assume that the ±1.35 V to ±18 V supply rating guarantees usable input or output ranges at every gain. Input common-mode voltage, output swing, gain, and supply limits are interdependent, so check the datasheet curves and equations with the worst-case sensor outputs. Also include resistor tolerance and source imbalance when calculating effective offset error; the stated 250 μV offset specification alone does not describe the complete system accuracy.

Estimated: the two amplifier channels consume 350 μA total when each operates at the stated 175 μA quiescent current. This estimate excludes external gain resistors, sensors, protection components, and load current. Use it as the amplifier-only baseline for a battery-power budget, then add the measured or specified current of the rest of the signal chain. Supply bypass capacitors should be selected using the manufacturer recommendations and the impedance requirements of the intended operating bandwidth.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

The exact package variant has no explicit compliance statement in the cited product material. The dual 36 V instrumentation amplifier is not presented as an automotive-qualified AEC-Q100 device.

Data napatotohanan sa: 2026-11-09 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

INA2126PA datasheet INA2126PA datasheet pdf INA2126PA pinout INA2126PA specifications INA2126PA equivalent INA2126PA replacement INA2126PA cross reference INA2126PA vs INA2126UA INA2126PA 16-PDIP footprint INA2126PA application circuit INA2126PA price INA2126PA stock Texas Instruments INA2126PA INA2126PA micropower instrumentation amplifier

Mga kaugnay na Mga Komponente at mga Tuntunin

Texas Instruments INA2126PA INA2126 INA2126UA INA126 INAx126 instrumentation amplifier precision instrumentation amplifier two-op-amp architecture differential signal acquisition common-mode rejection input common-mode range output swing offset voltage quiescent current 175 μA per channel 250 μV 200 kHz 16-pin PDIP PDIP package through-hole package portable instrumentation data acquisition bridge sensor interface process monitoring
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ