ISL8391IBZ - 4-Channel SPST Analog Switch | Renesas
MPN: ISL8391IBZ ✗ Tapus ng BuhayISL8391IBZ Ulas
An analog switch is an integrated semiconductor that connects or disects analog signal paths under digital control. The ISL8391IBZ belongs to the analog switch and multiplexer hierarchy within interface ICs. Its low-voltage operation, low power consumption, low leakage, and fast switching make it appropriate for battery-powered instrumentation, precision measurement, communications, and test systems where signal integrity must be preserved while control signals remain CMOS-compatible.
The device provides four SPST switch functions, 20 ohms typical and 35 ohms maximum on-resistance, and 1 ohm channel-to-channel on-resistance matching. Maximum leakage current is 2.5 nA, while switching times are 60 ns for turn-on and 30 ns for turn-off. Typical power consumption is approximately 1 microwatt, and the input interfaces support TTL- and CMOS-compatible control levels.
The ISL8391IBZ can use either one supply rail or positive and negative rails, which allows the same switching architecture to handle unipolar or bipolar signals. Its 1:1 configuration provides straightforward signal isolation without changing the signal level. Minimum 2000 V ESD protection is specified using Method 3015.7, improving handling robustness in systems where exposed connectors and test leads may introduce electrostatic discharge transients.
Typical applications include battery-powered data-acquisition equipment, automated test systems, communications equipment, sample-and-hold circuits, and precision signal routing. The 16-pin SOIC package supports conventional surface-mount assembly, while the low leakage and low power characteristics help preserve weak signals and conserve energy in portable systems.
When designing a circuit around the ISL8391IBZ, verify the control-logic levels and supply configuration against the manufacturer datasheet. Keep analog traces short, provide a stable supply reference, and account for charge injection and off-state leakage when switching high-impedance or very low-amplitude sources.
This product page combines the manufacturer electrical characteristics, package information, pin-compatible alternatives, application guidance, and practical design notes to support faster component selection and board-level implementation.
Mga alternatibo na pwedeng ilagay na ISL8391IBZ — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok ISL8391IBZ (parehas na form factor at footprint) — pagkakaiba sa Package, Power Consumption, Switch Configuration.
ISL8392IBZ
✅ Drop-In ⚠️ Mga Talaan Hindi NaiwerikmoMagkontak para sa presyo
Tingnan ang Datasheet →ISL8393IBZ
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
MAX391ESE+
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
MAX393ESE+
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
DG411DVZ
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
ISL8391IBZ Mga Pinakamataas na Rating at Electrical Characteristics
| Product Type | Quad SPST CMOS analog switch |
| Number of Switches | 4 circuits |
| Switch Configuration | 1:1 SPST |
| Single-Supply Operating Range | +2 V to +12 V |
| Dual-Supply Operating Range | ±2 V to ±6 V |
| On-Resistance, Typical | 20 ohms |
| On-Resistance, Maximum | 35 ohms |
| On-Resistance Matching Between Channels | 1 ohm |
| Leakage Current, Maximum | 2.5 nA at 85°C |
| Power Consumption | 1 microwatt typical |
| Turn-On Time | 60 ns |
| Turn-Off Time | 30 ns |
| Minimum ESD Protection | 2000 V per Method 3015.7 |
| Logic Compatibility | TTL and CMOS compatible |
| Packhaging | 16-pin SOIC |
| Uri ng Pagpapasok | Surface mount |
| Tindminan RoHS | Compliant |
| Lead-Free Status | Lead-free |
Gabay sa Pin Configuration ng ISL8391IBZ 16-pin soic
Pin configuration para sa ISL8391IBZ (16-pin soic package). Ang pagnunumero ng pin, mga function, at connection diagram ay tinukoy sa datasheet ng manufacturer. Sumangguni dito para sa eksaktong footprint at mga alituntunin sa soldering.
Wala ng detalyadong pinout data na magagamit para sa ISL8391IBZ.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
ISL8391IBZ ay nararapat para sa 6 aplikasyons: Battery-Powered Data Acquisition, Automated Test Systems, Communications Signal Routing, Precision Sample-and-Hold, Instrumentation Signal Conditioning, Low-Power Control and Monitor Circuits.
Battery-Powered Data Acquisition
The ISL8391IBZ fits battery-powered data-acquisition equipment because it operates from a single +2 V to +12 V rail and consumes approximately 1 microwatt typical power. Its four independent SPST paths can connect external sensors or test nodes to a measurement front end without requiring a multiplexer architecture. Low leakage of 2.5 nA maximum at 85°C helps preserve high-impedance sensor signals. Designers should still account for leakage into the complete measurement chain and verify the control-logic thresholds at the minimum system voltage.
Inirekomenda
Automated Test Systems
The ISL8391IBZ supports automated test systems that require four independently switched analog connections. Its 60 ns turn-on and 30 ns turn-off times are suitable for controlled routing, while 1 ohm on-resistance matching helps reduce channel-dependent errors. The 16-pin SOIC package is convenient for conventional surface-mount test hardware. When switching high-impedance sources, include off-state leakage and charge injection in the settling analysis rather than relying on switching time alone.
Inirekomenda
Communications Signal Routing
The ISL8391IBZ can route low-level communications signals when a board requires four separate SPST paths and fast isolation between channels. The 35 ohm maximum on-resistance is predictable for many routing applications, and the TTL- and CMOS-compatible interface simplifies control from common digital logic. Dual-supply operation from ±2 V to ±6 V permits bipolar routing where required. The circuit designer should verify signal amplitude, bandwidth, and logic levels against the exact operating conditions.
Inirekomenda
Precision Sample-and-Hold
The ISL8391IBZ can serve as the isolation element in precision sample-and-hold or switched-capacitor front ends. Four separate switches allow multiple inputs, guard paths, or acquisition channels to be controlled independently. Low leakage of 2.5 nA maximum at 85°C is valuable when the held capacitor and source impedance are high, while the 60 ns turn-on time supports rapid acquisition. Final settling must be calculated from switch on-resistance, capacitor value, clock edge rate, and the resulting charge injection.
Inirekomenda
Instrumentation Signal Conditioning
The ISL8391IBZ is appropriate for instrumentation signal conditioning where a low-voltage sensor must be connected to or isolated from an analog processing chain. Its 20 ohm typical on-resistance is small relative to many low-frequency sensor impedances, and the 1 micromatt typical power supports portable instruments. The single-rail configuration supports compact systems, while the ±6 V dual-rail capability handles bipolar signals. Place the switch close to the protected signal source to minimize noise pickup and unintended capacitive loading.
Inirekomenda
Low-Power Control and Monitor Circuits
The ISL8391IBZ can control low-power monitor, reset, or enable paths where four digital-controlled analog isolators are required. Its low 1 microwatt typical consumption and 2.5 nA maximum leakage reduce the impact of the switching network on sensitive standby circuits. The 16-pin SOIC footprint supports standard assembly methods and simplifies migration between compatible quad-SPST switch families. Because logic thresholds can change with supply voltage, the control source must remain valid across every operating condition.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for ISL8391IBZ — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | ISL8392IBZ | ISL8393IBZ | MAX391ESE+ | MAX393ESE+ | DG411DVZ |
|---|---|---|---|---|---|---|
| Brand | Renesas Electronics | Renesas Electronics | Renesas Electronics | Analog Devices | Analog Devices | Renesas Electronics |
| Package | 16-SOIC | 16-SOIC | 16-SOIC | 16-SOIC | 16-SOIC | 16-SOIC |
| Number of Switches | 4 circuits | 4 circuits | 4 circuits | 4 circuits | 4 circuits | 4 circuits |
| Switch Configuration | 1:1 SPST | SPST family member | SPST family member | SPST family member | SPST family member | SPST family member |
Pangunahing mga Pagkakaiba
- Documented low-voltage operating flexibility (kumpara saDG411DVZ)
- Low-leakage precision switching (kumpara saMAX391ESE+)
- Fast four-channel SPST control (kumpara saMAX393ESE+)
Talaan ng Disenyo
Confirm that the exact alternative suffix preserves the switch polarity, control logic, supply range, and pin functions of ISL8391IBZ. The Renesas family page identifies several pin-compatible switch families, but package compatibility alone does not establish electrical equivalence. Review the maximum on-resistance, leakage current, switching time, logic thresholds, and power-up state for every candidate before releasing it into a production design.
Place the ISL8391IBZ close to the signals it isolates and route analog and control traces away from high-current switching nodes. Keep ground-plane continuity beneath the device where practical, provide a local supply bypass capacitor, and avoid long stubs between the switch pins and the protected source. These measures reduce capacitive pickup and allow the 35 ohm maximum on-resistance to remain the dominant series impedance in the signal path.
Calculate settling from source impedance, load capacitance, switch on-resistance, and control-edge rate rather than from the 60 ns turn-on or 30 ns turn-off figures alone. For high-impedance nodes, include 2.5 nA maximum leakage as a possible error source. A practical characterization should measure the actual source impedance, node capacitance, injected charge, and settling error across the intended supply-voltage and temperature ranges.
Use either the single +2 V to +12 V supply configuration or the dual ±2 V to ±6 V configuration consistently with the signal being routed. The device consumes approximately 1 microwatt typical power, but the total rail current also depends on control states and external circuitry. Check the logic-high and logic-low levels at the lowest operating supply so that every control signal remains within the valid switching range.
Impormasyon ng Pagsunod sa Kautusan
The ISL8391 family documentation identifies RoHS-compliant, lead-free surface-mount construction. Automotive qualification, REACH status, halogen-free status, and conflict-minerals status are not identified for this part.