ISL8391IBZ - 4-Channel SPST Analog Switch | Renesas
Артикул: ISL8391IBZ ✗ Снят с производстваISL8391IBZ Обзор
An analog switch is an integrated semiconductor that connects or disects analog signal paths under digital control. The ISL8391IBZ belongs to the analog switch and multiplexer hierarchy within interface ICs. Its low-voltage operation, low power consumption, low leakage, and fast switching make it appropriate for battery-powered instrumentation, precision measurement, communications, and test systems where signal integrity must be preserved while control signals remain CMOS-compatible.
The device provides four SPST switch functions, 20 ohms typical and 35 ohms maximum on-resistance, and 1 ohm channel-to-channel on-resistance matching. Maximum leakage current is 2.5 nA, while switching times are 60 ns for turn-on and 30 ns for turn-off. Typical power consumption is approximately 1 microwatt, and the input interfaces support TTL- and CMOS-compatible control levels.
The ISL8391IBZ can use either one supply rail or positive and negative rails, which allows the same switching architecture to handle unipolar or bipolar signals. Its 1:1 configuration provides straightforward signal isolation without changing the signal level. Minimum 2000 V ESD protection is specified using Method 3015.7, improving handling robustness in systems where exposed connectors and test leads may introduce electrostatic discharge transients.
Typical applications include battery-powered data-acquisition equipment, automated test systems, communications equipment, sample-and-hold circuits, and precision signal routing. The 16-pin SOIC package supports conventional surface-mount assembly, while the low leakage and low power characteristics help preserve weak signals and conserve energy in portable systems.
When designing a circuit around the ISL8391IBZ, verify the control-logic levels and supply configuration against the manufacturer datasheet. Keep analog traces short, provide a stable supply reference, and account for charge injection and off-state leakage when switching high-impedance or very low-amplitude sources.
This product page combines the manufacturer electrical characteristics, package information, pin-compatible alternatives, application guidance, and practical design notes to support faster component selection and board-level implementation.
Аналоги без доработки для ISL8391IBZ — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с ISL8391IBZ (тот же форм-фактор и посадочное место) — отличается по Package, Power Consumption, Switch Configuration.
ISL8392IBZ
✅ Прямая замена ⚠️ Характеристики не провереныУточнить цену
Открыть даташит →ISL8393IBZ
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
MAX391ESE+
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
MAX393ESE+
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
DG411DVZ
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
ISL8391IBZ Максимальные параметры и электрические характеристики
| Product Type | Quad SPST CMOS analog switch |
| Number of Switches | 4 circuits |
| Switch Configuration | 1:1 SPST |
| Single-Supply Operating Range | +2 V to +12 V |
| Dual-Supply Operating Range | ±2 V to ±6 V |
| On-Resistance, Typical | 20 ohms |
| On-Resistance, Maximum | 35 ohms |
| On-Resistance Matching Between Channels | 1 ohm |
| Leakage Current, Maximum | 2.5 nA at 85°C |
| Power Consumption | 1 microwatt typical |
| Turn-On Time | 60 ns |
| Turn-Off Time | 30 ns |
| Minimum ESD Protection | 2000 V per Method 3015.7 |
| Logic Compatibility | TTL and CMOS compatible |
| Корпус | 16-pin SOIC |
| Тип монтажа | Surface mount |
| Статус RoHS | Compliant |
| Lead-Free Status | Lead-free |
Руководство по цоколевке ISL8391IBZ в корпусе 16-pin soic
Цоколевка для ISL8391IBZ (корпус 16-pin soic). Нумерация выводов, функции и схемы подключения определены в техническом описании производителя. Обратитесь к нему для точного посадочного места и рекомендаций по пайке.
Нет подробных данных о распиновке для ISL8391IBZ.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
ISL8391IBZ подходит для 6 применениеs: Battery-Powered Data Acquisition, Automated Test Systems, Communications Signal Routing, Precision Sample-and-Hold, Instrumentation Signal Conditioning, Low-Power Control and Monitor Circuits.
Battery-Powered Data Acquisition
The ISL8391IBZ fits battery-powered data-acquisition equipment because it operates from a single +2 V to +12 V rail and consumes approximately 1 microwatt typical power. Its four independent SPST paths can connect external sensors or test nodes to a measurement front end without requiring a multiplexer architecture. Low leakage of 2.5 nA maximum at 85°C helps preserve high-impedance sensor signals. Designers should still account for leakage into the complete measurement chain and verify the control-logic thresholds at the minimum system voltage.
Рекомендуется
Automated Test Systems
The ISL8391IBZ supports automated test systems that require four independently switched analog connections. Its 60 ns turn-on and 30 ns turn-off times are suitable for controlled routing, while 1 ohm on-resistance matching helps reduce channel-dependent errors. The 16-pin SOIC package is convenient for conventional surface-mount test hardware. When switching high-impedance sources, include off-state leakage and charge injection in the settling analysis rather than relying on switching time alone.
Рекомендуется
Communications Signal Routing
The ISL8391IBZ can route low-level communications signals when a board requires four separate SPST paths and fast isolation between channels. The 35 ohm maximum on-resistance is predictable for many routing applications, and the TTL- and CMOS-compatible interface simplifies control from common digital logic. Dual-supply operation from ±2 V to ±6 V permits bipolar routing where required. The circuit designer should verify signal amplitude, bandwidth, and logic levels against the exact operating conditions.
Рекомендуется
Precision Sample-and-Hold
The ISL8391IBZ can serve as the isolation element in precision sample-and-hold or switched-capacitor front ends. Four separate switches allow multiple inputs, guard paths, or acquisition channels to be controlled independently. Low leakage of 2.5 nA maximum at 85°C is valuable when the held capacitor and source impedance are high, while the 60 ns turn-on time supports rapid acquisition. Final settling must be calculated from switch on-resistance, capacitor value, clock edge rate, and the resulting charge injection.
Рекомендуется
Instrumentation Signal Conditioning
The ISL8391IBZ is appropriate for instrumentation signal conditioning where a low-voltage sensor must be connected to or isolated from an analog processing chain. Its 20 ohm typical on-resistance is small relative to many low-frequency sensor impedances, and the 1 micromatt typical power supports portable instruments. The single-rail configuration supports compact systems, while the ±6 V dual-rail capability handles bipolar signals. Place the switch close to the protected signal source to minimize noise pickup and unintended capacitive loading.
Рекомендуется
Low-Power Control and Monitor Circuits
The ISL8391IBZ can control low-power monitor, reset, or enable paths where four digital-controlled analog isolators are required. Its low 1 microwatt typical consumption and 2.5 nA maximum leakage reduce the impact of the switching network on sensitive standby circuits. The 16-pin SOIC footprint supports standard assembly methods and simplifies migration between compatible quad-SPST switch families. Because logic thresholds can change with supply voltage, the control source must remain valid across every operating condition.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для ISL8391IBZ — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | ISL8392IBZ | ISL8393IBZ | MAX391ESE+ | MAX393ESE+ | DG411DVZ |
|---|---|---|---|---|---|---|
| Brand | Renesas Electronics | Renesas Electronics | Renesas Electronics | Analog Devices | Analog Devices | Renesas Electronics |
| Package | 16-SOIC | 16-SOIC | 16-SOIC | 16-SOIC | 16-SOIC | 16-SOIC |
| Number of Switches | 4 circuits | 4 circuits | 4 circuits | 4 circuits | 4 circuits | 4 circuits |
| Switch Configuration | 1:1 SPST | SPST family member | SPST family member | SPST family member | SPST family member | SPST family member |
Ключевые отличия
- Documented low-voltage operating flexibility (против DG411DVZ)
- Low-leakage precision switching (против MAX391ESE+)
- Fast four-channel SPST control (против MAX393ESE+)
Заметки по проектированию
Confirm that the exact alternative suffix preserves the switch polarity, control logic, supply range, and pin functions of ISL8391IBZ. The Renesas family page identifies several pin-compatible switch families, but package compatibility alone does not establish electrical equivalence. Review the maximum on-resistance, leakage current, switching time, logic thresholds, and power-up state for every candidate before releasing it into a production design.
Place the ISL8391IBZ close to the signals it isolates and route analog and control traces away from high-current switching nodes. Keep ground-plane continuity beneath the device where practical, provide a local supply bypass capacitor, and avoid long stubs between the switch pins and the protected source. These measures reduce capacitive pickup and allow the 35 ohm maximum on-resistance to remain the dominant series impedance in the signal path.
Calculate settling from source impedance, load capacitance, switch on-resistance, and control-edge rate rather than from the 60 ns turn-on or 30 ns turn-off figures alone. For high-impedance nodes, include 2.5 nA maximum leakage as a possible error source. A practical characterization should measure the actual source impedance, node capacitance, injected charge, and settling error across the intended supply-voltage and temperature ranges.
Use either the single +2 V to +12 V supply configuration or the dual ±2 V to ±6 V configuration consistently with the signal being routed. The device consumes approximately 1 microwatt typical power, but the total rail current also depends on control states and external circuitry. Check the logic-high and logic-low levels at the lowest operating supply so that every control signal remains within the valid switching range.
Информация о соответствии
The ISL8391 family documentation identifies RoHS-compliant, lead-free surface-mount construction. Automotive qualification, REACH status, halogen-free status, and conflict-minerals status are not identified for this part.