Renesas Electronics

ISL8394IBZ - 4-Channel SPDT Analog Switch | Renesas Electronics

MPN: ISL8394IBZ ✓ Nakahanda
+2 V to +12 V Vdss 2.5 nA Id 35 ohm Rds(on) 20-SOIC Package
MOQ: 1 |

ISL8394IBZ Ulas

The Renesas Electronics ISL8394IBZ is a precision quad SPDT analog switch designed for low-voltage, single-supply or dual-supply signal-routing systems. It provides four independently controlled switches, a 2:1 multiplexing configuration, 35 ohm on-resistance in the manufacturer listing, and a 20-pin SOIC package. The device is intended for applications requiring low power consumption, low leakage current, and fast switching performance.

An analog switch is a semiconductor interface that routes analog or digital signals between circuit nodes under digital control. The ISL8394 belongs to the broader analog switch and multiplexer hierarchy, which includes SPDT switches, multiplexers, demultiplexers, and interface ICs used in test, measurement, communications, and instrumentation systems. Its quad SPDT arrangement allows one source signal to be connected to either of two destinations for each channel, or two sources to be routed to a common output, depending on the application configuration.

According to the manufacturer datasheet, the ISL8394 operates from a single +2 V to +12 V supply or from a dual supply of +/−2 V to +/−6 V. The device is specified for low power consumption of 5 microwatts, maximum leakage current of 2.5 nA, and fast switching speeds. The supplied product information identifies the device as a 4-circuit, 2:1 analog switch with 35 ohm on-resistance in a 20-SOIC package. These characteristics suit battery-powered equipment and precision measurement circuits where signal integrity and low standby current are important.

Typical uses include battery-powered test equipment, data-acquisition systems, audio and communication signal routing, instrumentation interfaces, and compact embedded measurement products. In a two-channel routing arrangement, control logic can select one of two analog inputs for connection to a shared signal-processing block while the other inputs remain electrically isolated.

Designers should pay close attention to the control logic levels, supply sequencing, input voltage range, and signal amplitude at each switched node. The low-leakage and low-power characteristics make the ISL8394 useful in battery-powered systems, but the PCB should minimize parasitic capacitance around high-impedance nodes and provide clean return paths for control and supply pins.

This page combines the manufacturer datasheet details, distributor identification, package information, and practical design guidance to support component selection, replacement planning, and PCB implementation. It also distinguishes the core ISL8394 function from nearby comparator and multiplexer families, helping engineers determine when the quad SPDT architecture is the correct switching choice.

Mga alternatibo na pwedeng ilagay na ISL8394IBZ — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

Variante sa Seri na ito

Katulad na modelo sa serye na katugma sa pagpasok ISL8394IBZ (parehas na form factor at footprint) — pagkakaiba sa Package.

Renesas Electronics
Package: 8-SOIC (IB) 3.9 mm
Ikabit sa ISL8394IBZ →
Renesas Electronics
Package: 20-pin SOIC
Ikabit sa ISL8394IBZ →

ISL83483IBZ-T

✅ Drop-In
📦 20-SOIC
Related ISL83483 family comparator; exact on-resistance, supply range, leakage, and timing differences require datasheet confirmation

📋 Alternatibo na Reference (hindi sa katalogo)

ISL83485IBZ-T

✅ Drop-In
Renesas Electronics
📦 20-SOIC
Transceiver · 1/1 · Half · RS-422, RS-485 · 10 Mbps · 3.3 V · 3.0 V to 3.6 V · 1/8 unit-load (up to 256 nodes)

Magkontak para sa presyo

Tingnan ang Datasheet →
ℹ️ 1 cross-package na parte(s) nakalipas – ibang pakete ay nangangailangan ng muling pagpapasok ng PCB at hindi tunay na pumapalit na walang pagbabago. Magkontak sa amin kung kailangan mo ng mga rekomendasyon sa ibang pakete.

ISL8394IBZ Mga Pinakamataas na Rating at Electrical Characteristics

Product Type Quad SPDT analog switch
Number of Circuits 4 circuits
Multiplex Configuration 2:1
On-Resistance 35 ohm
Supply Voltage, Single +2 V to +12 V
Supply Voltage, Dual +/-2 V to +/-6 V
Power Consumption 5 microwatts
Maximum Leakage Current 2.5 nA
Packhaging 20-SOIC
Package Pin Count 20 pins
Signal Type Analog signal switching
Application Category Battery-powered equipment
Uri ng Pagpapasok Surface mount
Katayuan ng Lifecycle Active; current lifecycle confirmation requires manufacturer product status

Gabay sa Pin Configuration ng ISL8394IBZ 20 pins

Pin configuration para sa ISL8394IBZ (20 pins package). Ang pagnunumero ng pin, mga function, at connection diagram ay tinukoy sa datasheet ng manufacturer. Sumangguni dito para sa eksaktong footprint at mga alituntunin sa soldering.

Pinout diagram ng 20 pins package para sa ISL8394IBZ

Wala ng detalyadong pinout data na magagamit para sa ISL8394IBZ.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

ISL8394IBZ ay nararapat para sa 6 aplikasyons: Battery-Powered Measurement Equipment, Data-Acquisition Signal Routing, Audio Signal Routing, Test and Instrumentation Interfaces, Communications Equipment Signal Isolation, Low-Power Embedded Control Interface.

🔋

Battery-Powered Measurement Equipment

The ISL8394IBZ fits battery-powered measurement equipment because the Intersil datasheet specifies 5 microwatts of power consumption and 2.5 nA maximum leakage current. Use the four SPDT channels to route low-level analog signals between a sensor interface and measurement circuitry. The single-supply range of +2 V to +12 V supports portable systems where standby power and leakage into the source are important. Keep the analog paths short, provide a defined ground reference, and verify the control levels against the selected supply voltage.

📊

Data-Acquisition Signal Routing

The ISL8394IBZ can route multiple analog channels in a data-acquisition front end through its four independently controlled SPDT sections. Each switch supports a 2:1 arrangement, allowing a selected source to connect to a common processing path or two sources to be separated according to the wiring configuration. The 35 ohm on-resistance and low leakage are useful for preserving signal integrity in compact acquisition systems. Confirm the maximum signal bandwidth, charge injection, and off-isolation limits in the manufacturer datasheet before selecting the routing topology.

🎧

Audio Signal Routing

The ISL8394IBZ is appropriate for low-voltage audio signal routing where the design needs bidirectional or source-selection paths rather than a powered audio amplifier. The low-leakage characteristic helps isolate inactive channels, while the quad SPDT structure provides four routing decisions in a single 20-SOIC package. A single +2 V to +12 V supply simplifies portable audio circuitry. Keep the switched node traces compact, use a continuous ground plane, and verify that the selected signal amplitude remains below the device’s analog operating limits.

🧪

Test and Instrumentation Interfaces

The ISL8394IBZ can provide selectable signal paths in test and instrumentation systems where four SPDT switches are needed to connect sources, loads, or reference nodes. The 5 microwatt power consumption and 2.5 nA maximum leakage are favorable for low-power test fixtures and portable instruments. The 20-SOIC package supports conventional surface-mount assembly. Place the device close to connector or sensor routing, maintain a low-impedance supply return, and use the datasheet timing curves when defining settling requirements after a control change.

🌐

Communications Equipment Signal Isolation

The ISL8394IBZ can isolate and reroute low-level communications signals in compact equipment using four independent SPDT switches. Its low off-state leakage helps reduce unwanted coupling between channels, and the single-supply operation supports systems with a +2 V to +12 V rail. The device is appropriate when the signal path must be switched rather than amplified. Validate insertion loss, bandwidth, and off-isolation against the operating frequency, and keep high-speed routing away from noisy control and power-return paths.

🧩

Low-Power Embedded Control Interface

The ISL8394IBZ fits embedded control boards that need local analog routing without the higher power and leakage of a larger switching subsystem. Four SPDT channels can connect sensors, actuators, or test points under MCU control while the device operates from a low single supply. The 20-SOIC package is suitable for standard surface-mount layouts and the 5 microwatt power specification supports low-power operation. Confirm logic thresholds, supply ramp requirements, and absolute maximum voltages in the manufacturer datasheet.

Buod ng mga Inirekomendang Produkto

ISL8394IBZ Renesas Electronics Ginagamit sa: Battery-Powered Measurement Equipment, Data-Acquisition Signal Routing, Audio Signal Routing, Test and Instrumentation Interfaces, Communications Equipment Signal Isolation, Low-Power Embedded Control Interface ISL83483IBZ-T Related Renesas interface family comparator Ginagamit sa: Battery-Powered Measurement Equipment, Audio Signal Routing, Communications Equipment Signal Isolation ISL83485IBZ Related interface-switch comparator Ginagamit sa: Data-Acquisition Signal Routing, Test and Instrumentation Interfaces, Low-Power Embedded Control Interface
What is the ISL8394IBZ function?
The ISL8394IBZ is a precision quad SPDT analog switch with four independently controlled switching circuits and a 2:1 multiplexing configuration. According to the Intersil datasheet, it routes low-voltage analog signals between circuit nodes and is designed for single or dual-supply operation. The device is supplied in a 20-SOIC package.
What is the operating voltage of ISL8394IBZ?
The ISL8394IBZ operates from a single +2 V to +12 V supply or from a dual supply of +/−2 V to +/−6 V. These operating ranges are stated in the Intersil ISL8394 datasheet. The correct supply choice depends on the signal amplitude and whether the design requires a unipolar or bipolar signal reference.
What are the key specifications of ISL8394IBZ?
The ISL8394IBZ is a four-circuit, 2:1 SPDT analog switch with 35 ohm on-resistance in a 20-SOIC package. The Intersil datasheet also identifies 5 microwatt power consumption and 2.5 nA maximum leakage current. Its fast switching characteristics support low-voltage signal-routing systems, including battery-powered equipment.
Where can I download the ISL8394IBZ datasheet PDF?
The ISL8394IBZ datasheet is available through the manufacturer-linked Intersil PDF at https://www.mouser.com/catalog/specsheets/intersil_isl8394.pdf. The document is titled “Low-Voltage, Single and Dual Supply, Quad SPDT, Analog Switches.” Use the manufacturer datasheet for the complete pin description, timing characteristics, and recommended operating conditions.
Where can I find the ISL8394IBZ pinout?
Use the pin-description table and package drawing in the Intersil ISL8394 datasheet to identify the 20-SOIC pins. The component is a 4-circuit SPDT switch with control and supply connections that must be assigned according to the manufacturer diagram. Confirm pin numbering against the exact ISL8394IBZ suffix before routing the PCB.
Is ISL8394IBZ suitable for battery-powered equipment?
The ISL8394IBZ is suitable for battery-powered equipment because the Intersil datasheet identifies a low power consumption of 5 microwatts and maximum leakage current of 2.5 nA. Its single-supply operating range begins at +2 V, which supports low-voltage portable systems. Actual battery-life performance still depends on the control strategy and signal amplitude.
What is the difference between ISL8394IBZ and ISL83483IBZ-T?
The ISL8394IBZ is the quad SPDT analog switch identified in the distributor listings, while the available comparison result identifies ISL83483IBZ-T as a related Renesas-family comparator part. The comparison material does not establish identical pinout or identical switching parameters, so ISL83483IBZ-T should be treated as a related family member rather than a confirmed drop-in replacement.
What is the difference between ISL8394IBZ and ISL83485IBZ?
The available comparison result places ISL83485IBZ beside ISL8394IBZ and discusses differences in series, package type, mounting style, RoHS status, and REACH status. It does not provide enough information to confirm pin-to-pin equivalence. Verify the ISL83485IBZ datasheet and package drawing before treating it as a replacement.
Is the MAX394EPP+ a drop-in replacement for ISL8394IBZ?
The MAX394EPP+ is not a confirmed drop-in replacement for the ISL8394IBZ. The comparison information describes the MAX394EPP+ as a quad SPDT CMOS analog switch in a 20-pin DIP package, while the ISL8394IBZ is listed in a 20-SOIC package. The different package technology requires a PCB-level review and does not establish pin compatibility.
When should I choose ISL8394IBZ over a multiplexer?
Choose the ISL8394IBZ when the design needs four independent SPDT routing paths, low leakage, low power consumption, and operation from a low single supply. A conventional multiplexer may be preferable when many more channels are required or when its logic interface is a better system fit. The ISL8394 is strongest when compact precision routing matters more than channel-count scalability.
What can replace ISL8394IBZ?
The confirmed replacement candidate set is limited: the available comparison pages identify related ISL83483IBZ-T and ISL83485IBZ devices, but they do not confirm identical pinout, package, or electrical ratings. The MAX394EPP+ is a different package type. Before replacement, compare the exact SOIC pinout, supply range, control levels, on-resistance, leakage, and switching timing.
Is ISL8394IBZ in stock and what is its lead time?
Current stock and lead time should be confirmed through the Request a Quote form on this page. The distributor search results show product availability and ordering references, but they do not provide a reliable stock quantity or a committed lead-time schedule for the exact ISL8394IBZ configuration. Request the current quantity, delivery date, and packaging requirement with the quote.
How much does ISL8394IBZ cost?
Use the Request a Quote form on this page for the current ISL8394IBZ price and quantity breaks. The available search results identify the exact part and its distributors, but no explicit quantity-break price table is included in the supplied listing data. A quote request provides current commercial terms without presenting stale price figures.
Can ISL8394IBZ handle dual-supply signals?
Yes. The Intersil ISL8394 datasheet specifies operation from +/−2 V to +/−6 V supplies, enabling bipolar signal routing within the device’s stated operating limits. The signal amplitude must remain within the datasheet limits for the selected supply configuration. Confirm absolute maximum ratings, control-logic levels, and the switch’s off isolation before finalizing the design.
What PCB considerations apply to ISL8394IBZ?
Place the device close to the routed signal nodes and keep analog traces short and away from switching or digital return paths. Provide a low-impedance ground reference, decouple the supply according to the datasheet guidance, and connect unused control inputs to a defined logic state. The SOIC package’s 20-pin layout should be checked against the exact manufacturer pin table before layout release.

Impormasyon ng Talumpati sa Engineering for ISL8394IBZ — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose the ISL8394IBZ when the design needs four independent SPDT routing paths in a 20-SOIC package and operates from a +2 V to +12 V single supply or a +/-2 V to +/-6 V dual supply. Its 5 microwatt power consumption and 2.5 nA maximum leakage are useful in battery-powered and low-leakage measurement systems. The ISL83483IBZ-T and ISL83485IBZ are related Renesas family devices, but their exact electrical and pin compatibility must be checked before substitution. The MAX394EPP+ provides a comparable quad SPDT function but is listed in a DIP package, so it is not a direct same-footprint choice. Use the manufacturer pin table and datasheet timing, voltage, and leakage limits as the final replacement criteria.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto ISL83483IBZ-T ISL83485IBZ MAX394EPP+
Package 20-SOIC 20-SOIC; exact package drawing requires confirmation 20-SOIC; exact package drawing requires confirmation 20-pin DIP; not the same package
Brand Renesas Electronics Renesas Electronics Renesas Electronics Maxim Integrated

Pangunahing mga Pagkakaiba

  • Quad SPDT routing in one 20-SOIC package (kumpara saMAX394EPP+)
  • Low-voltage single-supply operation (kumpara saMAX394EPP+)
  • Low power and leakage characteristics (kumpara saISL83483IBZ-T)

Talaan ng Disenyo

Place the ISL8394IBZ close to the analog nodes being routed. Keep switched traces short, provide a continuous ground reference, and separate sensitive analog paths from digital control and switching-current returns. The 20-SOIC footprint should be checked against the exact manufacturer pin drawing before routing. Do not rely on package-name similarity alone when assigning the control and supply pins.

Operate the device only within its specified single-supply range of +2 V to +12 V or dual-supply range of +/−2 V to +/−6 V. Ensure the supply rails remain within the absolute maximum limits and provide adequate decoupling near the device. Because the datasheet specifies only 5 microwatts of power consumption, carefully evaluate control-state leakage and unused-channel behavior as part of the complete system power budget.

Do not assume that a related ISL8348x MPN has identical pinout or switching behavior. Verify the SOIC pin table, control thresholds, on-resistance, leakage, switching time, and absolute maximum ratings for each candidate. Similarly, the MAX394EPP+ uses a DIP package according to the comparison information, so it is not a same-footprint replacement without PCB redesign.

For high-impedance sources, minimize parasitic capacitance around the switched nodes and avoid routing control lines adjacent to sensitive analog inputs. Confirm the device’s off-isolation and charge-injection characteristics against the required measurement accuracy. Use the manufacturer timing curves to establish settling time after a control transition rather than estimating it from general switching speed.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

The available product information identifies the component and its analog-switch function but does not provide definitive compliance statements for the exact ISL8394IBZ configuration.

Data napatotohanan sa: 2026-11-10 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

ISL8394IBZ datasheet ISL8394IBZ pinout ISL8394IBZ datasheet pdf ISL8394IBZ equivalent ISL8394IBZ replacement ISL8394IBZ cross reference ISL8394IBZ vs MAX394EPP+ Renesas ISL8394IBZ ISL8394IBZ 20-SOIC ISL8394IBZ application circuit ISL8394IBZ price ISL8394IBZ stock ISL8394IBZ lead time ISL8394IBZ analog switch ISL8394IBZ low voltage

Mga kaugnay na Mga Komponente at mga Tuntunin

Renesas Electronics Intersil ISL8394IBZ ISL83483IBZ-T ISL83485IBZ MAX394EPP+ quad SPDT analog switch analog switch multiplexer demultiplexer interface IC semiconductor 2:1 multiplexing on-resistance leakage current power consumption single supply dual supply 20-SOIC SOIC package surface mount battery-powered equipment data acquisition signal routing test and instrumentation
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ