Renesas Electronics

ISL8489IB-T - 5V RS-485/RS-422 Transceiver | Renesas Electronics

MPN: ISL8489IB-T ✓ Nakahanda
5 V Vdss RS-422 and RS-485 Rds(on) 14-pin SOIC Package High-speed or slew-rate-limited operation Speed
MOQ: 1 |

ISL8489IB-T Ulas

Renesas Electronics ISL8489IB-T is a 5 V, low-power RS-485/RS-422 interface transceiver packaged in a 14-pin SOIC. The device combines a full RS-485/RS-422 transceiver with low-power operation and supports high-speed or slew-rate-limited communication. Its 5 V supply and 14-pin surface-mount package suit compact industrial, instrumentation, and embedded data-link designs.

An RS-485/RS-422 transceiver is a physical-layer interface IC that converts logic-level signals to and from balanced differential pairs. In the RS-485 hierarchy, it connects a host controller or programmable logic device to a field bus. RS-422 provides a point-to-point differential link, while RS-485 supports multipoint bus arrangements subject to proper termination, biasing, and topology.

The ISL8489IB-T is identified as a one-driver, one-receiver full transceiver for both RS-422 and RS-485 operation. Its 5 V operating supply supports integration with conventional low-voltage digital logic. The manufacturer describes the family as low-power and usable in high-speed or slew-rate-limited networks, allowing designers to select edge rates suited to their cable length, topology, and signal-integrity requirements.

A balanced interface reduces sensitivity to common-mode noise relative to single-ended signaling. This makes the device applicable to industrial control links, data acquisition systems, building automation equipment, and communications equipment operating near motors, relays, power converters, or long external cables. The relevant data rate, driver strength, receiver thresholds, and propagation delays must be confirmed in the manufacturer datasheet before finalizing a high-speed link.

The 14-pin SOIC package provides a standard surface-mount footprint suitable for automated assembly. Because RS-485 and RS-422 links depend on board-level implementation, layout should preserve the relationship between the transceiver, protection components, connector, and return path. Correct termination, fail-safe biasing, isolation strategy, and ESD protection are as important as the IC selection.

For each RS-485 port, verify the supply voltage, logic thresholds, maximum data rate, driver and receiver enable behavior, thermal conditions, and package pin assignments against the manufacturer datasheet. Pay particular attention to whether a termination resistor is already integrated or must be added externally, and whether the receiver output remains defined when the bus is idle.

This page organizes the exact ISL8489IB-T identity, technical specifications, interface-use guidance, source links, and design considerations. It also distinguishes confirmed device facts from parameters that require direct verification in the manufacturer datasheet before high-volume PCB release or production qualification.

Mga alternatibo na pwedeng ilagay na ISL8489IB-T — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

Wala ng magagamit na drop-in alternatibo para sa produkto na ito.

Hilingin ang Alternatibo

ISL8489IB-T Mga Spesipikasyon

Product Type RS-485/RS-422 transceiver
Transceiver Configuration 1 transmitter and 1 receiver
Supply Voltage na Operasyon 5 V
Supported Standards RS-422 and RS-485
Power Class Low power
Signal Mode Balanced differential
Speed Control High-speed or slew-rate-limited operation
Packhaging 14-pin SOIC
Package Dimensions 3.90 mm nominal body width
Uri ng Pagpapasok Surface mount

Gabay sa Pin Configuration ng ISL8489IB-T 3.90 mm nominal body width

Pin configuration para sa ISL8489IB-T (3.90 mm nominal body width package). Ang pagnunumero ng pin, mga function, at connection diagram ay tinukoy sa datasheet ng manufacturer. Sumangguni dito para sa eksaktong footprint at mga alituntunin sa soldering.

Pinout diagram ng 3.90 mm nominal body width package para sa ISL8489IB-T

Wala ng detalyadong pinout data na magagamit para sa ISL8489IB-T.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

ISL8489IB-T ay nararapat para sa 6 aplikasyons: Industrial RS-485 Control Bus, Point-to-Point RS-422 Data Link, Data Acquisition and Instrumentation, Building Automation Equipment, Embedded Serial Communication, Security and Surveillance Systems.

🏭

Industrial RS-485 Control Bus

The ISL8489IB-T fits a 5 V industrial control link when the equipment uses a one-driver, one-receiver RS-485 interface and requires the function in a 14-pin SOIC package. Its low-power differential transceiver architecture supports communication between a controller and remote measurement or actuation modules without converting the balanced bus to a single-ended signal at the device. The bus layout should use a paired route, termination at the physical endpoints, and defined fail-safe biasing. Before release, verify the maximum supported data rate, cable length, driver loading, and propagation delay in the manufacturer datasheet. Those limits determine whether the selected high-speed or slew-rate-limited operating mode is appropriate for the plant environment and cable topology.

🌐

Point-to-Point RS-422 Data Link

The ISL8489IB-T is applicable to a point-to-point RS-422 connection between two systems that require balanced differential signaling and a 5 V transceiver supply. Its one-transmitter and one-receiver organization maps naturally to a bidirectional point-to-point arrangement when direction control is handled elsewhere or by the interface family’s enable functions. The differential pair improves noise immunity compared with an unbalanced link, which is valuable near industrial machinery or switching power equipment. Confirm the exact enable-pin behavior, receiver output state, timing, and maximum data rate in the manufacturer datasheet. PCB routing should maintain closely coupled driver and receiver connections to the connector while keeping stubs short.

📊

Data Acquisition and Instrumentation

The ISL8489IB-T can be used in data-acquisition equipment that must collect remote measurements over a balanced RS-422 or RS-485 link. The 5 V transceiver operation integrates with conventional low-voltage control logic, while the one-driver, one-receiver structure supports systems that need one physical interface for transmitting commands and receiving responses. Differential signaling helps preserve measurement integrity when the instrument is connected to sensors through external cabling. The design must account for ground-offset tolerance, common-mode limits, receiver thresholds, and the maximum supported edge rate. Confirm those electrical values in the manufacturer datasheet and validate the complete cable, connector, protection, and grounding arrangement to ensure the link remains reliable.

🧩

Building Automation Equipment

The ISL8489IB-T is suitable for building-automation controllers, gateways, and field modules that use a low-power 5 V RS-485 communication path. A differential transceiver allows command and response data to travel over a cable that may run near relays, lighting electronics, or other switching loads. The 14-pin SOIC package is compact enough for distributed controller boards, while the driver-receiver arrangement fits common half-duplex bus architectures when the associated enable functions are wired correctly. Use the manufacturer datasheet to verify idle-output behavior, timing, thermal limits, and maximum bus loading. Add the required termination and fail-safe network components, and use a protected connector interface where the building wiring enters the equipment enclosure.

🔧

Embedded Serial Communication

The ISL8489IB-T can bridge a low-voltage embedded controller to an RS-422 or RS-485 physical layer. The 5 V supply is appropriate for systems using 5 V digital logic, while the differential interface extends communication distance and improves noise tolerance relative to a single-ended UART connection. In a half-duplex design, the controller can manage transmit and receive enable state, subject to the exact pin functions shown in the manufacturer datasheet. Confirm propagation delay and maximum signaling rate so the host controller can meet protocol timing requirements. Keep the transceiver close to the board connector, place protection devices near the entry point, and route the differential pair as a coupled pair with a continuous reference-plane return path.

🎥

Security and Surveillance Systems

The ISL8489IB-T is applicable to security equipment that distributes commands or collects status through a balanced industrial communication link. A camera controller, access-control unit, or environmental monitor can use the low-power transceiver to communicate with remote modules over RS-422 or RS-485 wiring. The differential interface helps reduce errors when cables pass near motors, relays, or switching supplies inside an equipment cabinet. The design should include connector-level surge and ESD protection, defined bus idle biasing, and endpoint termination. Verify the transceiver’s receiver thresholds, common-mode range, and maximum data rate against the manufacturer datasheet. The 14-pin SOIC format also simplifies correction of legacy designs that already use the same footprint.

What is the ISL8489IB-T?
The ISL8489IB-T is a 5 V, low-power, one-transmitter and one-receiver interface IC for RS-422 and RS-485 balanced differential communications. According to the manufacturer datasheet listing, it is available in a 14-pin SOIC package. The device is intended for point-to-point RS-422 links and multipoint RS-485 networks where low-power operation, compact packaging, and robust differential signaling are useful.
What are the key specifications of ISL8489IB-T that engineers should know?
The confirmed core specifications are a 5 V supply, low-power operation, one-transmitter/one-receiver configuration, support for both RS-422 and RS-485, and a 14-pin SOIC package. The manufacturer describes the family as suitable for high-speed or slew-rate-limited communication. Maximum data rate, propagation delay, receiver thresholds, supply current, and temperature limits should be selected from the device-specific datasheet before final circuit release.
Where can I download the ISL8489IB-T datasheet PDF?
The ISL8489IB-T datasheet can be accessed through the Octopart document page or the Intersil datasheet result linked on this page. The manufacturer document contains the authoritative pin description, electrical characteristics, timing diagrams, driver and receiver limits, and application information. Use the document associated specifically with ISL8489IB-T because related family members can differ in speed-control options, supply behavior, or package marking.
Where can I find the ISL8489IB-T pinout?
The ISL8489IB-T pinout is defined in the pin-description table of the manufacturer datasheet for its 14-pin SOIC package. Use that table when assigning driver inputs, receiver outputs, enable controls, supply pins, and grounds on the PCB. The package has 14 physical leads, but their exact numbering and functions should be transcribed directly from the device-specific drawing rather than inferred from another RS-485 transceiver.
Is ISL8489IB-T suitable for RS-485 and RS-422 networks?
The ISL8489IB-T supports both RS-422 and RS-485 communication through a one-driver, one-receiver differential transceiver arrangement. RS-422 is generally used for point-to-point balanced links, while RS-485 supports longer multipoint buses with correct termination and biasing. The 5 V supply and low-power design make the device suitable for industrial and embedded interfaces, subject to confirming speed and cable-length limits.
What can replace the ISL8489IB-T?
A genuine replacement for the ISL8489IB-T must use the same 14-pin SOIC footprint, preserve the RS-422/RS-485 pin functions, and remain within acceptable limits for 5 V supply, data rate, propagation delay, receiver threshold, and output drive. No independently verified drop-in substitute is established for this part, so treat any candidate as an engineering review item until its manufacturer datasheet has been compared pin by pin.
Is the ISL8489IB-T the same as the ISL8489IB?
The ISL8489IB and ISL8489IB-T refer to the same 14-SOIC transceiver family and electrical configuration, while the -T suffix identifies the manufacturer ordering form associated with the tape-and-reel presentation. The suffix must still be checked against the manufacturer ordering information for reel dimensions, quantity, and packing method. A packaging-only variant does not alter the electrical drop-in relationship.
When should I choose ISL8489IB-T over another RS-485 transceiver?
Choose the ISL8489IB-T when the design requires a 5 V, one-transmitter/one-receiver RS-422/RS-422-compatible interface in a 14-pin SOIC and the family’s low-power, high-speed or slew-rate-limited options meet the link requirements. Select another device when the design requires a different package, lower-voltage operation, integrated termination, isolated signaling, higher node count, or a data rate outside the confirmed device limits.
What is the best Renesas equivalent for the ISL8489IB-T?
The closest identified same-family ordering form is the ISL8489IB, which is listed in a 14-SOIC package as a one-transmitter, one-receiver full RS-422/RS-485 transceiver. Its electrical suitability still depends on the suffix interpretation and device-specific ordering table. Confirm the pinout, electrical characteristics, and packing requirements in the manufacturer datasheet before treating it as a production replacement.
ISL8489IB-T vs ISL8489IB — which is better for industrial control links?
The ISL8489IB-T is the ordering form associated with the taped 14-SOIC presentation, while the ISL8489IB is the base device designation identified with the same RS-422/RS-485 transceiver configuration. For an industrial control PCB, electrical compatibility is the deciding factor rather than the order suffix. Verify supply voltage, timing, receiver thresholds, enable functions, and ESD rating against the manufacturer documentation before procurement.
Where can I buy the ISL8489IB-T online?
Use the Request a Quote form on this page to request the ISL8489IB-T, current commercial terms, stock allocation, and lead time. The form provides a single sourcing path without requiring you to compare unrelated sellers. Include the required quantity, reel packaging preference, target date, and any inspection or traceability requirements so the quotation can be prepared efficiently.
What is the price of the ISL8489IB-T?
The current commercial terms for the ISL8489IB-T are provided through the Request a Quote form on this page. Submit the required quantity, packaging preference, delivery location, and target schedule for a current quotation. This approach accommodates order size and supply conditions without presenting a static figure that could become inaccurate before the order is placed.
What is the lead time for the ISL8489IB-T?
The lead time for the ISL8489IB-T depends on the requested quantity, reel packaging, current inventory allocation, and manufacturing conditions. Request the current schedule through the Request a Quote form on this page and include the required delivery date. If the quantity or traceability requirements are unusual, state them in the request so procurement can confirm the applicable plan.
Is the ISL8489IB-T in stock?
Current availability for the ISL8489IB-T should be confirmed through the Request a Quote form on this page. Provide the required order quantity and target date so the current allocation can be checked. If allocation is constrained, include a permitted forecast or alternate quantity to allow procurement to identify the nearest available delivery plan.
How should termination and fail-safe biasing be designed for an ISL8489IB-T bus?
Terminate the RS-485 differential pair at the physical ends of the bus, not at every node, and use biasing to hold the receiver input in a defined state when no driver is active. The placement of termination and bias components depends on cable length, topology, node count, and whether the transceiver includes those functions. The manufacturer datasheet and interface circuit recommendations should guide the final network, while keeping the differential route compact and symmetric.

Impormasyon ng Talumpati sa Engineering for ISL8489IB-T — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose the ISL8489IB-T for a compact 5 V design that needs a one-driver, one-receiver balanced interface supporting both RS-422 and RS-485. It is particularly relevant to 14-pin SOIC designs that benefit from low-power operation and a family offering both high-speed and slew-rate-limited behavior. Verify the exact maximum data rate, propagation delay, receiver thresholds, common-mode range, and enable functions in the manufacturer datasheet before release. Consider a different transceiver when the board requires integrated termination, galvanic isolation, a smaller package, lower-voltage operation, multiple drivers and receivers, or a verified second source. A candidate with the same 14-pin outline is not automatically a drop-in replacement because enable polarity, fail-safe behavior, input impedance, and timing can differ even when the external package matches.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto
Brand Renesas Electronics
Package 14-pin SOIC
Transceiver Configuration 1 transmitter and 1 receiver
Operating Supply Voltage 5 V
Supported Standards RS-422 and RS-485
Power Class Low power
Speed Control High-speed or slew-rate-limited operation
Mounting Type Surface mount

Pangunahing mga Pagkakaiba

  • Supports two established balanced serial standards in one device (kumpara saSingle-standard RS-485 transceiver)
  • Low-power 5 V interface architecture (kumpara saHigher-voltage RS-485 transceiver)
  • Choice of high-speed or slew-rate-limited operation (kumpara saFixed-edge-rate interface)

Talaan ng Disenyo

Route the RS-422 or RS-485 differential pair as a tightly coupled pair from the transceiver to the protection network and connector. Avoid stubs between the transceiver and connector, maintain clearance from switching-power nodes, and provide a continuous ground reference beneath the interface route. Place any external protection or common-mode components close to the connector because their purpose is to divert external transients before they reach the transceiver pins.

Do not assume that every similarly described RS-485 transceiver is pin-compatible with the ISL8489IB-T. Compare the 14-pin diagram, driver and receiver enables, supply pins, fail-safe behavior, receiver output logic, and input impedance before substituting a device. Also confirm whether termination and fail-safe biasing are integrated or external. A package match alone does not establish electrical drop-in compatibility.

Use endpoint termination appropriate to the physical bus topology and add fail-safe biasing so the receiver remains in a defined state when the bus is idle. For long or noisy installations, evaluate common-mode range and ground-potential differences rather than relying only on nominal data rate. The manufacturer datasheet should be used to set cable length, node count, propagation-delay, and edge-rate limits for the installation.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

Compliance status was not stated in the identified product results and requires confirmation in the manufacturer datasheet or product declaration.

Data napatotohanan sa: 2026-11-15 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

ISL8489IB-T datasheet ISL8489IB-T pinout ISL8489IB-T specifications ISL8489IB-T equivalent ISL8489IB-T replacement ISL8489IB-T cross reference ISL8489IB-T 14 SOIC ISL8489IB-T RS-485 ISL8489IB-T RS-422 ISL8489IB-T price ISL8489IB-T stock Renesas ISL8489IB-T

Mga kaugnay na Mga Komponente at mga Tuntunin

Renesas Electronics Intersil ISL8489IB-T ISL8489IB RS-485 RS-422 differential transceiver interface IC communications IC semiconductor balanced differential signaling one-driver one-receiver transceiver low-power transceiver slew-rate-limited operation 14-pin SOIC SOIC family surface-mount package SMD industrial control bus data acquisition building automation termination resistor fail-safe biasing common-mode voltage
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ