LFCPNX-100-9LFG672C - 100K LC CertusPro-NX FPGA, 672-BGA | Lattice
MPN: LFCPNX-100-9LFG672C ✓ NakahandaLFCPNX-100-9LFG672C Ulas
An FPGA (Field Programmable Gate Array) is a programmable logic device that allows hardware designers to implement custom digital circuits after PCB fabrication. The CertusPro-NX family sits within the broader taxonomy of programmable logic devices: FPGA -> programmable logic -> logic IC -> integrated circuit. FPGAs differ from CPLDs and ASICs in that they offer far higher logic density, embedded memory blocks, DSP slices, and high-speed transceivers, while remaining reconfigurable in the field. The CertusPro-NX targets advanced general-purpose applications where balance between logic density, I/O bandwidth, and power efficiency is essential.
Key features include up to 100K logic cells (LCs), high-speed 10G SerDes transceivers, a generous amount of embedded SRAM distributed across multiple block sizes, and a wide selection of general-purpose I/O. The device supports Lattice's Radiant and Diamond design toolchains and is AEC-Q100 qualified, making it suitable for automotive, industrial, and edge-compute deployments. The 672-ball LFG package exposes 313 user I/O pins, supporting flexible PCB integration.
Architecturally, the CertusPro-NX leverages a 28 nm Fully Depleted Silicon-on-Insulator (FD-SOI) process that provides excellent soft-error rate performance, low leakage, and high static power efficiency. Embedded memory is partitioned into large RAM blocks, and the SerDes blocks support multiple protocol standards (PCIe, 10G Ethernet, CPRI) via firmware-loaded PCS layers. The Nexus platform also integrates hardened peripherals including configuration engines, PLLs, and security features.
Typical applications include industrial edge AI inference, machine vision, video bridging, automotive sensor fusion, and 5G wireless infrastructure. With its combination of high logic density and low power, the LFCPNX-100 is well suited for battery-powered or thermally constrained deployments where larger 7 nm or 12 nm FPGAs would be impractical.
When designing with this device, ensure the PCB provides adequate decoupling (typically 0402/0603 ceramics placed close to each power pin), and allocate sufficient board real estate for the 672-ball BGA escape routing. Developers should use the Lattice Radiant tool suite for synthesis, place-and-route, and bitstream generation.
This page synthesizes distributor pricing across five vendors, drops-in alternatives within the LFCPNX family, and practical design notes not consolidated in the manufacturer datasheet.
Mga alternatibo na pwedeng ilagay na LFCPNX-100-9LFG672C — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok LFCPNX-100-9LFG672C (parehas na form factor at footprint) — pagkakaiba sa Logic Cells, Mounting Type, Operating Temperature Range, Package.
LFCPNX-100-9LFG672I
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →LFCPNX-50-9LFG672C
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
LFCPNX-100-9LFG672C01A
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
LFCPNX-100-9LFG672C Mga Pinakamataas na Rating at Electrical Characteristics
| Series | CertusPro-NX (Nexus platform) |
| Process Technology | 28 nm FD-SOI |
| Logic Cells | 100,000 |
| LUTs | 96000 |
| Embedded Memory (bits) | 3,833,856 |
| User I/O Count | 313 |
| Packhaging | 672-ball LFG (FCBGA) |
| Supply Voltage (Core) | 1 V |
| SerDes Support | 10G |
| Hanay ng Temperature na Operasyon | Commercial grade |
| Level ng Sensitivity sa Asid ng Moisture (MSL) | 4 (per JEDEC J-STD-020) |
| Peak Reflow Temperature | 250 C |
| Uri ng Pagpapasok | Surface Mount |
| Tindminan RoHS | Compliant |
| Qualification | AEC-Q100 automotive |
Gabay sa Pin Configuration ng LFCPNX-100-9LFG672C 672-ball lfg (fcbga)
Pin configuration para sa LFCPNX-100-9LFG672C (672-ball lfg (fcbga) package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa LFCPNX-100-9LFG672C.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
LFCPNX-100-9LFG672C ay nararapat para sa 7 aplikasyons: Industrial Edge AI Inference, Automotive Sensor Fusion, 5G Wireless Infrastructure, Video Bridging and Aggregation, Medical Imaging, Aerospace and Defense Avionics, IoT Edge Gateways.
Industrial Edge AI Inference
The LFCPNX-100-9LFG672C is well matched to edge AI inference for industrial machine vision and predictive maintenance applications. Its 100K logic cells and 3.8 Mbit embedded memory are sufficient to host quantized CNN inference engines (MobileNet, EfficientNet-Lite) at 5-15 frames per second, while the 28 nm FD-SOI process delivers the low static power required for fanless, sealed industrial enclosures. Designers typically instantiate parallel DSP pipelines within the CertusPro-NX fabric and stream serialized image data through the integrated 10G SerDes to FPGA-based pre-processing blocks. Compared with larger 7 nm FPGAs, the LFCPNX-100 cuts dynamic power by roughly 40-60% for equivalent workloads. The AEC-Q100 automotive qualification also makes it viable for harsh-environment factory installations.
Inirekomenda
Automotive Sensor Fusion
The LFCPNX-100-9LFG672C is deployed as a sensor-fusion hub in ADAS platforms where multiple camera, radar, and LiDAR feeds must be synchronized, time-stamped, and pre-processed before forwarding to the central compute SoC. Its 313 user I/O pins are sufficient to interface 8-12 automotive camera serializers plus multiple SPI/I2C/GPIO control planes, while the integrated 10G SerDes transports aggregated payloads upstream. The AEC-Q100 qualification, FD-SOI soft-error resilience, and automotive-grade temperature support make it directly suitable for in-cabin ECU deployments. The 672-ball LFG FCBGA also supports robust PCB thermal dissipation, which is critical in sealed automotive enclosures where airflow is restricted.
Inirekomenda
5G Wireless Infrastructure
In 5G small-cell and distributed-unit (DU) base stations, the LFCPNX-100-9LFG672C is used to implement PHY-layer front-haul and mid-haul processing, CPRI/eCPRI bridge functions, and time-sensitive networking control. The integrated 10G SerDes blocks support multiple CPRI line rates (4.9 Gbps, 9.8 Gbps, 10.1 Gbps) directly, and the 100K-logic-cell capacity is sufficient to host complete PHY pre-processing, FFT/iFFT accelerators, and FEC encoder/decoder blocks. The low-power 28 nm FD-SOI technology is particularly attractive for outdoor small-cell deployments where the unit must be fanless and thermally passive. The device is typically paired with a host SoC or NPU for higher-layer baseband processing.
Inirekomenda
Video Bridging and Aggregation
Professional video production, broadcast, and machine-vision systems use the LFCPNX-100-9LFG672C as a multi-format video bridge that aggregates 4-6 SDI/HDMI/DisplayPort inputs and outputs unified 4K streams over 10G Ethernet or USB-C. Its high LUT count supports parallel protocol conversion paths (HDMI 2.0 to SDI, DisplayPort 1.4 to eDP) and color-space conversion pipelines. The 3.8 Mbit embedded memory holds line buffers for active video mixing without requiring external SDRAM, and the 313 user I/O pins expose enough LVDS/MIPI/SDI interfaces for professional broadcast gear. The 672-ball FCBGA package supports reflow at peak 250 C per JEDEC J-STD-020.
Inirekomenda
Medical Imaging
In ultrasound carts, endoscopy processors, and bedside patient-monitoring devices, the LFCPNX-100-9LFG672C is used for real-time beamforming, image reconstruction, and multi-channel data acquisition. The 100K-logic-cell capacity is sufficient to host 64-channel digital beamforming for portable ultrasound, while the integrated SerDes blocks enable high-speed data transfer from analog front-end ICs. The low-power FD-SOI technology keeps the device cool enough for handheld probe assemblies, and the AEC-Q100 qualification also extends suitability to medical device deployments requiring high reliability. The 672-ball LFG FCBGA supports the multi-layer PCB stack-ups typical in medical imaging hardware.
Inirekomenda
Aerospace and Defense Avionics
Avionics subsystems use the LFCPNX-100-9LFG672C for flight-control data concentration, MIL-STD-1553/ARINC-429 bridge interfaces, and real-time sensor aggregation in unmanned aerial platforms. The FPGA's FD-SOI process provides inherent radiation tolerance beneficial for high-altitude operations, while the 313 user I/O pins accommodate multiple avionics buses and discrete control signals. The 10G SerDes blocks support high-bandwidth links to mission computers and EO/IR sensor payloads. With 3.8 Mbit embedded memory, mission-critical state machines can run from on-chip RAM without external memory dependencies, reducing single-event-upset risk.
Inirekomenda
IoT Edge Gateways
Industrial IoT edge gateways deploy the LFCPNX-100-9LFG672C to aggregate sensor traffic from multiple field buses (Modbus, CAN, RS-485, EtherCAT) and forward normalized data over 10G Ethernet or cellular backhaul. Its low-power envelope makes it suitable for DIN-rail mounted gateways without active cooling, and the 100K-logic-cell capacity supports on-gateway data normalization, edge analytics, and protocol translation in a single device. The integrated 10G SerDes provides ample uplink bandwidth for video and high-speed sensor data. The 672-ball FCBGA also enables tight PCB integration with PoE power management and isolated serial transceivers.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for LFCPNX-100-9LFG672C — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | LFCPNX-100-9LFG672I | LFCPNX-50-9LFG672C | LFCPNX-100-9LFG672C01A |
|---|---|---|---|---|
| Brand | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor |
| Package | 672-ball LFG (FCBGA) | 672-ball LFG (FCBGA) - same | 672-ball LFG (FCBGA) - same | 672-ball LFG (FCBGA) - same |
| Logic Cells | 100,000 | 100,000 | 50,000 (-50%) | 100,000 |
| SerDes Support | 10G | 10G | 10G | 10G |
| Temperature Grade | Commercial | Industrial | Commercial | Commercial |
| AEC-Q100 | Qualified | Qualified | Qualified | Qualified |
Pangunahing mga Pagkakaiba
- 28 nm FD-SOI process delivers low static and dynamic power (kumpara saLFCPNX-50-9LFG672C)
- Same-family LFG672 footprint with full backward compatibility (kumpara saLFCPNX-50-9LFG672C)
- Industrial temperature grade with same package (kumpara saLFCPNX-100-9LFG672I)
Talaan ng Disenyo
The 672-ball LFG FCBGA requires microvia PCB technology (any-layer HDI recommended) with controlled-impedance traces for the 10G SerDes pairs. Place BGA escape vias on a 0.5 mm or finer pitch pattern. Multiple stitching vias should surround the BGA land pattern to provide robust power delivery and thermal dissipation. Estimated: with 1 oz copper on outer layers and 4-layer stack-up, expect ~2 W power dissipation per 100 MHz of switching logic at 50% toggle rate.
Provide a clean 1 V core supply with bulk capacitance totaling at least 100 uF (low-ESR ceramic + tantalum) plus 0.1 uF and 1 nF decoupling within 2 mm of each power pin. According to Lattice hardware design guidelines, separate analog and digital supplies with a ferrite bead. Use a dedicated sequencing controller if the system includes multiple Lattice power rails (VCCIO, VCCAUX, VCC_CORE). The SerDes PLL supply should be filtered with a pi-network to minimize jitter.
Estimated: at full utilization (~80% logic, ~70% I/O toggle), the LFCPNX-100-9LFG672C dissipates roughly 1.5-2.5 W typical and up to 3.5 W worst-case. The 672-ball LFG FCBGA exposes a thermal pad array on the underside, which must be soldered to a thermal copper plane with thermal vias (0.3 mm drill, 1.0 mm pitch) to achieve the datasheet theta_JA. For sealed enclosures, add a small heatsink or use forced airflow over the BGA top side. The MSL 4 rating requires careful moisture control before reflow.
Avoid mixing commercial (C) and industrial (I) temperature grade parts in safety-critical designs - the C variant does not carry the same qualification characterization. Confirm the full part-number suffix before ordering production volumes. When migrating bitstreams across part-number variants, verify that the Radiant project settings match the target device's speed grade and package. Configuration errors at JTAG boundary-scan often trace to missing or under-sized TMS/TCK pull-ups rather than FPGA faults.
Impormasyon ng Pagsunod sa Kautusan
RoHS compliance and AEC-Q100 qualification confirmed via Lattice CertusPro-NX product family documentation. Halogen-free status not explicitly listed in the verified sources.
