LM224DTBG - Low-Power Quad Op Amp, 3-32 V | onsemi
MPN: LM224DTBG ✓ NakahandaLM224DTBG Ulas
An operational amplifier, or op amp, is an integrated voltage amplifier whose open-loop gain and feedback behavior allow it to perform precision amplification, buffering, summation, integration, and filtering. A quad operational amplifier combines four amplifiers in one package, allowing compact implementation of multi-channel analog systems. Within the component hierarchy, the LM224 belongs to the operational-amplifier, analog-amplifier, analog-signal-conditioning, and integrated-circuit categories.
The LM224DTBG provides four independent general-purpose amplifier channels in one 14-TSSOP package, reducing external component count and board area compared with four separate single or dual amplifier packages. Its stated 3 V to 32 V operating range supports both lower-voltage and higher-voltage analog systems. The -25°C to +85°C temperature specification supports industrial-temperature applications where the operating environment exceeds the commercial range.
The quad-channel architecture is particularly useful when four related analog signals must be conditioned under common supply and layout constraints. Because all four amplifiers share one package, power routing and grounding can be organized consistently across the device. Designers should still evaluate each channel independently for output swing, input common-mode range, noise, stability, and load-drive requirements during final circuit verification.
Typical uses include sensor-signal conditioning, transducer-buffer interfaces, analog measurement chains, audio and communication equipment, low-frequency active filtering, and general instrumentation. The LM224DTBG can also serve as a quad amplifier in industrial control systems where three or four channels are needed for excitation, sensing, filtering, or output buffering without using multiple packages.
PCB implementation requires careful attention to feedback-loop stability, input and output grounding, and decoupling. Place the power-supply bypass capacitor close to the supply pins, keep feedback traces short, and avoid routing sensitive inputs beside high-current outputs. Because the package exposes 14 terminals in a compact TSSOP footprint, inspect land patterns and solder-paste design before assembly.
This product page consolidates the exact package, channel count, supply range, temperature range, sourcing information, drop-in comparison, and application guidance for LM224DTBG. It also provides practical selection criteria for comparing this onsemi quad amplifier with the documented LM224DTBR2G alternative and with pin-compatible single-supply amplifier families.
Mga alternatibo na pwedeng ilagay na LM224DTBG — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
LM224DTBR2G
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
LM224DTBG Mga Pinakamataas na Rating at Electrical Characteristics
| Product Type | Quad general-purpose operational amplifier |
| Number of Amplifier Channels | 4 channels |
| Supply Voltage Range | 3 V to 32 V |
| Maximum Total Supply Voltage | 32 V |
| Hanay ng Temperature na Operasyon | -25°C to +85°C |
| Packhaging | 14-TSSOP |
| Package Pin Count | 14 pins |
| Power Class | Low-power operational amplifier |
| Amplifier Classification | General-purpose amplifier |
| Primary Functions | Instrumentation, op amp, buffer amplifier |
| Uri ng Pagpapasok | Surface mount |
| Number of Inputs per Channel | 2 inputs |
| Number of Outputs per Channel | 1 output |
Gabay sa Pin Configuration ng LM224DTBG 14 pins
Pin configuration para sa LM224DTBG (14 pins package). Ang analog component na ito ay may input, output, at power supply pins. Sumangguni sa datasheet ng manufacturer para sa offset null, compensation, at enable pin configurations. Perpekto para sa signal conditioning at amplifier circuits.
Wala ng detalyadong pinout data na magagamit para sa LM224DTBG.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
LM224DTBG ay nararapat para sa 6 aplikasyons: Industrial Sensor Signal Conditioning, Transducer Buffering, Low-Frequency Active Filters, Audio and Communication Interfaces, Process Control Output Buffering, Portable Measurement Equipment.
Industrial Sensor Signal Conditioning
LM224DTBG is well suited to conditioning several low-frequency sensor signals within an industrial measurement system. Four integrated general-purpose amplifier channels can provide buffering, gain, summing, or active filtering without requiring four separate packages. The 3 V to 32 V operating range supports varied supply architectures, while the -25°C to +85°C specification covers moderately extended industrial environments. Designers should verify the input common-mode range, output swing, and offset requirements for the chosen sensor and excitation level. Feedback components should be placed close to the associated amplifier pins, and sensitive input routes should remain separated from output and supply-current paths to minimize coupling.
Inirekomenda
Transducer Buffering
LM224DTBG can buffer high-impedance sensor or transducer outputs before they enter a measurement, conversion, or communications stage. Its four amplifier channels allow up to four buffered outputs to share the same 14-TSSOP package and supply arrangement, helping reduce board area. The low-power classification supports portable and distributed measurement systems where power efficiency is important. At the circuit level, high source impedance can interact with input bias current and capacitance, so the sensor return path and guarding strategy require careful layout. Confirm the amplifier’s input bias current and common-mode limits against the transducer impedance before finalizing the schematic.
Inirekomenda
Low-Frequency Active Filters
LM224DTBG is appropriate for low-frequency active-filter stages requiring several amplifier channels, such as multi-stage anti-alias filters, smoothing filters, or signal-conditioning filters in instrumentation. The quad package provides four amplifiers that can implement cascaded sections, buffered summing networks, or gain stages. The 3 V to 32 V supply range permits operation across multiple industrial and embedded rails. Stability depends on the selected gain, feedback network, source impedance, and capacitive loading, so simulate the complete topology rather than evaluating each stage in isolation. Maintain short feedback paths and place compensation or filter capacitors according to the chosen transfer function to preserve expected phase margin.
Inirekomenda
Audio and Communication Interfaces
LM224DTBG can support low-frequency audio and communication interface functions where multiple buffered channels are needed, including receive-buffer, mixing, and gain stages around external converters. Four amplifiers in one 14-TSSOP package simplify routing and conserve board area compared with separate multi-amplifier packages. Its 3 V to 32 V supply range accommodates common embedded and industrial system rails. Audio-path designs must account for output swing, capacitive loading, channel-to-channel behavior, and the bandwidth required by the signal. Keep output routing separated from high-impedance inputs, provide a low-impedance ground reference, and verify stability with the actual load and feedback values.
Inirekomenda
Process Control Output Buffering
LM224DTBG can buffer control and monitoring outputs in an industrial process-control assembly where three or four channels must be driven consistently. Typical uses include scaling sensor-derived control signals, buffering voltage references for downstream converters, and providing isolation buffers between measurement and actuator stages. The quad topology and -25°C to +85°C rating fit equipment operating above a commercial-temperature environment. Each output should be checked for the intended load, because capacitive loading and the selected gain can affect stability. Keep output current paths away from precision sensor inputs and use local supply bypassing to prevent transient behavior from propagating between controlled channels.
Inirekomenda
Portable Measurement Equipment
LM224DTBG fits portable measurement instruments that combine several low-frequency analog channels with limited board space. Its low-power quad operational-amplifier architecture can buffer inputs, implement gain stages, and support channel multiplexing within one 14-TSSOP package. The 3 V minimum supply rating is useful for compact systems operated from regulated battery-derived rails, while the 32 V maximum provides flexibility for industrial variants. Power budget and thermal performance should be evaluated over the full battery range. Low-noise layout, short feedback loops, and a common ground reference are particularly important when measuring small sensor outputs, because long PCB traces and shared return paths can undermine accuracy.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for LM224DTBG — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | LM224DTBR2G |
|---|---|---|
| Brand | onsemi | onsemi |
| Package | 14-TSSOP | 14-TSSOP |
| Amplifier Channels | 4 channels | 4 channels |
| Supply Voltage Range | 3 V to 32 V | 3 V to 32 V |
| Amplifier Type | General-purpose, low-power operational amplifier | General-purpose operational amplifier |
| Supply Configuration | Single supply | Single supply |
Pangunahing mga Pagkakaiba
- Four general-purpose channels in one compact package (kumpara saLM224DTBR2G)
- Single-supply operation across a broad voltage range (kumpara saLM224DTBR2G)
- Channel consolidation reduces package count (kumpara saLM2902N/PB)
Talaan ng Disenyo
Assign each amplifier channel to a continuous ground reference and place the supply bypass capacitor adjacent to the device supply terminals. Keep output and feedback traces short, particularly when driving capacitive loads. For low-level sensor inputs, route away from supply-current paths and high-impedance nodes. These layout choices reduce coupling between the four channels and help maintain predictable analog performance across the 3 V to 32 V operating range.
Do not assume that two quad LM224 ordering codes are interchangeable merely because they use the same 14-TSSOP footprint. Compare LM224DTBG with LM224DTBR2G for input offset, bias current, bandwidth, output swing, slew rate, supply current, common-mode limits, and temperature grade. A footprint match establishes mechanical compatibility, while the electrical comparison establishes whether the replacement is appropriate for the actual channel configuration.
Evaluate the complete analog channel rather than only the nominal supply rating. The LM224DTBG supports 3 V to 32 V, but usable signal range depends on the selected supply and the amplifier’s input and output limits. At low supply voltages, verify common-mode headroom and output swing. At higher voltages, confirm operating temperature and channel power dissipation so the TSSOP package remains within its intended thermal environment.
Keep feedback loops physically compact and connect the noninverting input directly to its defined reference. High source impedances can combine with input capacitance to alter gain and phase, particularly in sensor-buffer applications. Use an appropriate return path, avoid routing inputs beneath noisy analog stages, and verify stability with the actual source and load impedances before production release.
Impormasyon ng Pagsunod sa Kautusan
No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status is present in the indexed product information. The -25°C to +85°C operating range is an environmental specification and does not establish AEC-Q100 qualification.