Texas Instruments

LM2902PWRE4 - Quad 26V 1.2MHz Op-Amp TSSOP-14 | Texas Instruments

MPN: LM2902PWRE4 ✓ Nakahanda
2 mV Vdss 14-TSSOP (PW) Package
MOQ: 1 |

LM2902PWRE4 Ulas

The Texas Instruments LM2902PWRE4 is a quad general-purpose operational amplifier with four independent high-voltage (26V) amplifier circuits, a 1.2 MHz gain-bandwidth product, and a 2 mV (typical) input offset voltage, housed in a 14-pin TSSOP (PW) surface-mount package delivered in tape and reel.

An operational amplifier (op amp) is a high-gain voltage amplifier with differential inputs and a single-ended output. Within the signal-chain hierarchy, it belongs to the amplifier IC family, sitting above discrete transistor stages and below application-specific instrumentation amplifiers. Quad op amps such as the LM2902 integrate four channels in one package, saving board space and matching thermal drift across channels in multi-channel analog circuits.

Key features of the LM2902PWRE4 include a wide supply range (single supply 3V to 26V, or dual supplies up to +/-13V per distributor listing data), low supply current per amplifier, input common-mode range that includes ground (ground-sense operation), and output voltage swing that approaches the negative rail. These characteristics make the family the industry workhorse for single-supply analog front ends. The E4 suffix denotes TI's lead-free, RoHS-compliant tape-and-reel packing of the PW package.

Architecturally, the LM2902 uses a classic bipolar input stage with PNP input transistors that allow input voltages down to the negative rail, which is essential in single-supply designs near 0V. Per TI, the next-generation LM2902B and LM324B versions are drop-in replacements for all versions of the LM224, LM324, and LM2902, with improved specifications such as a 3V to 36V supply range and reduced offset on B/BA versions.

Typical applications include transducer amplification, active filters, comparators and multi-stage signal conditioning in automotive and industrial systems, battery-powered instruments, and DC gain blocks.

Design consideration: the LM2902 is not rail-to-rail at the output or unity-gain stable at high capacitive loads - verify phase margin and output swing headroom in low-voltage designs.

This page synthesizes distributor listings, drop-in alternative cross-references, and practical design notes not found in the manufacturer datasheet alone.

Mga alternatibo na pwedeng ilagay na LM2902PWRE4 — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

Variante sa Seri na ito

Katulad na modelo sa serye na katugma sa pagpasok LM2902PWRE4 (parehas na form factor at footprint) — pagkakaiba sa Amplifier Type, Package, RoHS Status, Gain-Bandwidth Product, Number of Amplifiers.

Texas Instruments
Amplifier Type: Quad, general-purpose, single supply
Package: 14-TSSOP (PW), 0.173 in (4.40 mm) width
RoHS Status: RoHS-compliant finish (E4 suffix)
Ikabit sa LM2902PWRE4 →
Texas Instruments
Amplifier Type: General-purpose
Package: 14-pin TSSOP (PW), 4.40 mm width
RoHS Status: unknown
Ikabit sa LM2902PWRE4 →
Texas Instruments
Package: 14-TSSOP
Gain-Bandwidth Product: 1.2 MHz
Number of Amplifiers: 4 circuits
Ikabit sa LM2902PWRE4 →
STMicroelectronics
Amplifier Type: Low-power general-purpose operational amplifier
RoHS Status: Compliant
Gain-Bandwidth Product: 1.3 MHz
Ikabit sa LM2902PWRE4 →

LM2902PWRG3

✅ Drop-In
Texas Instruments
📦 14-TSSOP (PW)
4 amplifiers · General-purpose · 26 V · 1.2 MHz · 2 mV · 0.5 V/µs · 0.8 mA typical · Single supply or split supply

Magkontak para sa presyo

Tingnan ang Datasheet →

LM2902PWRG4

✅ Drop-In
Texas Instruments
📦 14-TSSOP (PW)
Quad general-purpose operational amplifier · 4 circuits · 26 V · 1.2 MHz · 14-TSSOP · Surface mount · Single supply or dual supply

Magkontak para sa presyo

Tingnan ang Datasheet →

LM2902KPWE4

✅ Drop-In
Texas Instruments
📦 14-TSSOP (PW)
Quad, general-purpose, single supply · 4 · 1.2 MHz · 26 V · 2 kV (LM2902K family) · Less than 500 V · Exceeds 200 V (200 pF) · AEC-Q100 qualified

Magkontak para sa presyo

Tingnan ang Datasheet →

LM2902BPWR

✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo
📦 14-TSSOP (PW)
next-generation B version: supply extended 3V to 36V and improved offset; per TI drop-in replaces all LM2902 versions

📋 Alternatibo na Reference (hindi sa katalogo)

LM2902YPT

✅ Drop-In
STMicroelectronics
📦 14-TSSOP
4 circuits · Low-power general-purpose operational amplifier · Yes · 20 nA · 1.3 MHz · 0.4 V/µs · 7 mV · Push-pull

Magkontak para sa presyo

Tingnan ang Datasheet →

LM2902PWRE4 Mga Pinakamataas na Rating at Electrical Characteristics

Amplifier Channels 4
Gain Bandwidth Product 1.2 MHz
Input Offset Voltage 2 mV
Supply Voltage Range (Single) 3 V to 26 V
Supply Voltage (Dual) +/-13 V
Packhaging 14-TSSOP (PW)
Uri ng Pagpapasok Surface Mount
Packaging Tape & Reel (PWR)
Amplifier Type General Purpose
Tindminan RoHS Compliant (E4 suffix denotes lead-free)
Product Series LM2902
Drop-in Upgrade Path LM2902B / LM324B (3V to 36V, lower offset)

Pin Configuration ng LM2902PWRE4

TSSOP-14 (4.4mm) Package Pinout Diagram TSSOP-14 4.4x5mm, P0.65mm, JEDEC MO-153. 14-pin thin shrink. 1 14 2 13 3 12 4 11 5 10 6 9 7 8 TSSOP-14 (4.4mm)
Pin 1 OUT1 — Output of amplifier 1
Pin 2 IN1- — Inverting input of amplifier 1
Pin 3 IN1+ — Non-inverting input of amplifier 1
Pin 4 V+ — Positive supply voltage
Pin 5 IN2+ — Non-inverting input of amplifier 2
Pin 6 IN2- — Inverting input of amplifier 2
Pin 7 OUT2 — Output of amplifier 2
Pin 8 OUT3 — Output of amplifier 3
Pin 9 IN3- — Inverting input of amplifier 3
Pin 10 IN3+ — Non-inverting input of amplifier 3
Pin 11 V- / GND — Negative supply (dual supply) or ground (single supply)
Pin 12 IN4+ — Non-inverting input of amplifier 4
Pin 13 IN4- — Inverting input of amplifier 4
Pin 14 OUT4 — Output of amplifier 4

Tipikal na mga Gamit

LM2902PWRE4 ay nararapat para sa 6 aplikasyons: Automotive Sensor Signal Conditioning, Industrial Current-Sense and Monitoring Front Ends, Battery-Powered Portable Instruments, Active Filters and Signal Conditioning, Audio Signal Routing and Mixing, Comparator and Threshold Detection Circuits.

🚗

Automotive Sensor Signal Conditioning

The LM2902PWRE4 fits automotive sensor conditioning because the LM2902 line is TI's automotive/industrial grade of the LM324 quad op amp, offering 26V supply tolerance that survives 12V battery transients and a 2 mV offset adequate for resistive and inductive sensor bridges. Its ground-sensing input common-mode range allows amplification of signals referenced to chassis ground without negative supplies. In a typical channel, the op amp amplifies a throttle-position or pressure-sensor output by a gain of 10 to 50 before the ADC, consuming only the bandwidth needed (1.2 MHz GBW supports gains up to about 50 at audio-band signals). Four channels in one TSSOP-14 reduce component count and channel-to-channel thermal mismatch. TI recommends the next-generation LM2902B as a drop-in upgrade with 36V transient tolerance.

🏭

Industrial Current-Sense and Monitoring Front Ends

In industrial equipment the LM2902PWRE4 serves as a low-cost multi-channel front end for current-sense amplification, 4-20 mA loop conditioning, and monitoring circuits on 24V rails. The 26V single-supply rating allows direct connection to nominal 24V industrial supplies with margin, and the four independent amplifiers implement sense, reference, and filter stages in a single package. Its ground-sensing inputs measure shunt voltages near 0V, while the 1.2 MHz bandwidth comfortably handles control-loop signals well below 100 kHz. The 2 mV offset dominates accuracy at small shunt voltages, so for sub-100 mV full-scale shunts calibrate digitally or select the improved-offset LM2902B BA grade. The TSSOP-14 footprint keeps the analog front end compact on crowded control boards.

📱

Battery-Powered Portable Instruments

The LM2902PWRE4 suits battery-powered instruments because it operates from a single 3V supply up to 26V and its inputs sense signals at ground potential, letting designers amplify small transducer outputs without a negative rail or charge pump. The quad integration provides four gain/filter/buffer stages from one package, and the low per-channel supply current typical of the bipolar LM2902 family preserves battery life in multichannel meters, DMM front ends, and environmental sensors. The 1.2 MHz gain-bandwidth product covers low-frequency measurement signals with stable closed-loop gains up to several hundred. Designers should budget for the 2 mV input offset when measuring microvolt-level signals, and the TSSOP-14 package supports dense two-layer layouts common in portable electronics.

🔧

Active Filters and Signal Conditioning

Active low-pass, band-pass, and Sallen-Key filters are a classic LM2902 application: the 1.2 MHz gain-bandwidth product supports filter corner frequencies up to roughly 10-20 kHz with accurate Q, since the GBW should exceed the corner frequency by at least 50-100x for predictable response. Four amplifiers per TSSOP-14 package allow multi-stage filters (typically four poles) in one device with matched thermal drift between stages. The ground-sensing inputs simplify single-supply filter biasing by referencing the virtual ground to mid-supply or to ground for DC-coupled designs. Designers must respect the output swing limits - not rail-to-rail - when setting filter gain and supply headroom. For low-voltage 3.3V systems with signals near the positive rail, a rail-to-rail quad such as the TS974 is a stronger choice.

🎧

Audio Signal Routing and Mixing

The LM2902PWRE4 works in consumer and industrial audio front ends where its 1.2 MHz bandwidth covers the full audio band with ample loop gain: at 20 kHz the open-loop gain remains high enough for low distortion in gains up to about 20 dB. Quad integration suits mixing consoles and multichannel preamplifiers, with one TSSOP-14 providing four summing or buffer stages. The ground-sensing input range handles AC-coupled and ground-referenced sources in single-supply audio designs at 12V or 24V. Because the output stage is not rail-to-rail, keep signal swings within roughly 1.5V of each rail to avoid clipping distortion. For hi-fi applications demanding lower noise and offset, TI's precision audio op amps outperform this general-purpose part, but for cost-driven audio control circuitry the LM2902 remains a standard choice.

⚡

Comparator and Threshold Detection Circuits

Although not a dedicated comparator, the LM2902PWRE4 is widely used as a low-speed comparator and window detector in cost-sensitive industrial and automotive boards: its ground-sensing inputs allow thresholds referenced to ground, and the open-collector-like output swing behavior near the negative rail simplifies interfacing to logic in single-supply systems. Four amplifiers enable multi-threshold monitoring - undervoltage, overvoltage, and two alarm levels - from one package. Response time is limited by the 1.2 MHz bandwidth and output slew behavior, so this application is restricted to slow events (milliseconds) such as battery-level supervision and fault latching, not fast switching. TI application guidance recommends adding hysteresis with a feedback resistor because, unlike true comparators, op amps have no internal hysteresis.

What is the LM2902PWRE4?
The LM2902PWRE4 is a Texas Instruments quad general-purpose operational amplifier containing four independent amplifier circuits rated for up to 26V supply, with a 1.2 MHz gain-bandwidth product and 2 mV input offset voltage, in a 14-pin TSSOP (PW) surface-mount package. Per TI, it belongs to the industry-standard LM2902/LM324 family widely used for single-supply signal conditioning, transducer amplification, and active filters in automotive and industrial electronics.
What is the supply voltage range of the LM2902PWRE4?
The LM2902PWRE4 operates from a single supply of 3V to 26V, or from dual supplies up to +/-13V, according to the TI product page which describes the LM2902 as a quad 26V operational amplifier. TI notes that the next-generation LM2902B version extends the supply range to 3V to 36V and remains a drop-in replacement. Always confirm the exact minimum and maximum ratings in the manufacturer datasheet before finalizing a design, since derating at high temperature may apply.
What is the difference between LM2902PWRE4 and LM2902PWR?
Functionally there is no difference: LM2902PWRE4 and LM2902PWR are the same die in the same 14-pin TSSOP (PW) package. The E4 suffix is TI's legacy ordering code indicating the RoHS-compliant, lead-free tape-and-reel packing. According to cross-reference comparison listings, the two are fully interchangeable - terminals, package, and main performance parameters are consistent - so either part number can be used on the same PCB footprint without redesign.
What is the best drop-in replacement for LM2902PWRE4?
The best drop-in replacements are the TI LM2902PWR / LM2902PWRG4 (identical part, alternate order codes) and, for improved performance, the next-generation TI LM2902B, which per TI can drop-in replace all versions of the LM224, LM324, and LM2902. The B version offers an extended 3V to 36V supply range and lower input offset voltage on the BA grade. All options use the same 14-pin TSSOP footprint, so no PCB modification is required.
Is the LM2902 the same as the LM324?
The LM2902 and LM324 are functionally the same industry-standard quad op amp; per TI, the LM324B and LM2902B next-generation devices can drop-in replace all versions of both. The main historical difference is the temperature grade - the LM2902 is the automotive/industrial grade part while the LM324 is the commercial grade - so verify the operating temperature range and qualification requirements for your application when substituting between the two numbering lines.
Can LM2902PWRE4 be used in automotive applications?
Yes, the LM2902 family is TI's automotive and industrial grade version of the LM324 quad op amp, and it is widely used in automotive electronics such as sensor signal conditioning and battery monitoring. Confirm the required AEC-Q100 qualification status and temperature grade for your specific program in the manufacturer datasheet and quality documentation. For new automotive designs, TI recommends evaluating the next-generation LM2902B version, which drop-in replaces the original LM2902 with improved specifications.
What is the input offset voltage of the LM2902PWRE4?
The LM2902PWRE4 has a 2 mV input offset voltage, according to the TI product page which lists the LM2902 as a quad 26V 1.2 MHz 2 mV offset operational amplifier. TI notes that the BA-grade B versions improve this to +/-2 mV or better over extended conditions. For precision applications requiring sub-millivolt offset, consider a precision quad op amp instead, or null the offset in firmware if your signal chain allows digital calibration.
What is the gain bandwidth product of the LM2902PWRE4?
The gain-bandwidth product is 1.2 MHz, as stated on the TI product page. This means at a closed-loop gain of 10 (20 dB) the usable bandwidth is roughly 120 kHz, and at unity gain the amplifier is stable at up to 1.2 MHz. For audio-band or slow sensor interfaces this is ample; for wideband or fast pulse applications, choose a higher-speed op amp family. The B version also provides 1.2 MHz bandwidth with improved specifications.
Is the LM2902PWRE4 rail-to-rail?
No, the LM2902PWRE4 is not rail-to-rail. Its input common-mode range extends to the negative rail (ground-sense operation in single-supply designs, a hallmark of the LM2902 family), but the input does not reach the positive rail, and the output swings close to but not fully to the negative rail and saturates well below the positive rail at load. For circuits needing true rail-to-rail input and output, TI offers the TLV and OPA families as purpose-built alternatives.
How is the LM2902PWRE4 pinout arranged in the TSSOP-14 package?
The LM2902PWRE4 uses the standard quad op amp 14-pin pinout: pin 1 is OUT1, pin 2 is IN1-, pin 3 is IN1+, pin 4 is V+, pin 5 is IN2+, pin 6 is IN2-, pin 7 is OUT2, pin 8 is OUT3, pin 9 is IN3-, pin 10 is IN3+, pin 11 is V- (or GND in single-supply use), pin 12 is IN4+, pin 13 is IN4-, and pin 14 is OUT4. Use the pin-description table in the manufacturer datasheet when assigning PCB tracks.
Where can I download the LM2902PWRE4 datasheet PDF?
The official LM2902 datasheet is available from Texas Instruments on the LM2902 product page at ti.com, which provides the PDF datasheet, parameter tables, application notes, and quality documents for the family including the LM2902PWRE4 ordering option. A complete datasheet is the authoritative source for absolute maximum ratings, electrical characteristics over temperature, and typical application circuits. Request the datasheet link through this page if you need a direct copy alongside your quote.
What is the price of LM2902PWRE4?
The LM2902PWRE4 is a low-cost, high-volume quad op amp; distributor listings show it priced at commodity levels (for reference, LCSC lists the part in stock with prices starting under one dollar in single-piece quantity). For current XAIPART pricing at your required quantity, use the Request a Quote form on this page - quotes reflect real-time stock, quantity breaks, and lead time rather than static list prices that change daily.
Where can I buy LM2902PWRE4 online?
You can request LM2902PWRE4 directly through the Request a Quote form on this XAIPART product page, which handles sourcing, stock confirmation, and quantity pricing in one step. Distributor channels such as DigiKey, Mouser, and LCSC also list the part, but the quote form consolidates delivery options and volume breaks for your BOM. Because this is an active TI part in tape-and-reel packing, standard lead times are typically short for stocked quantities.
What is the LM2902PWRE4 equivalent from other manufacturers?
Cross-brand equivalents of the LM2902PWRE4 include the STMicroelectronics LM2902YPT, an automotive-grade quad op amp in a 14-pin TSSOP package, which cross-reference listings pair directly against the TI part. Because the LM2902 pinout is an industry standard maintained by multiple manufacturers, same-package LM2902/LM324-family parts from other vendors are typically pin-compatible, but you must verify temperature range, offset voltage, supply ratings, and qualification level in each vendor datasheet before final substitution.
What are the key specifications of the LM2902PWRE4 that engineers should know?
Four channels of general-purpose amplification; 26V maximum supply (single 3V to 26V or +/-13V dual); 1.2 MHz gain-bandwidth product; 2 mV input offset voltage; input common-mode range extending to the negative rail; 14-pin TSSOP (PW) surface-mount package in tape-and-reel packing; RoHS-compliant E4 ordering option; and drop-in upgrade compatibility with the TI LM2902B/LM324B (3V to 36V, lower offset). These figures come from the TI product page and family datasheet.
When should I choose LM2902PWRE4 over a modern rail-to-rail op amp?
Choose the LM2902PWRE4 when you need a proven, low-cost, multi-channel amplifier for signals near ground, wide 26V supply headroom, and long-term second-source availability - for example, sensor conditioning on 12V/24V automotive or industrial rails. Choose a modern rail-to-rail CMOS op amp instead when your supply is 3.3V or 5V, you need output swing to the positive rail, or you need lower bias current for high-impedance sources. The LM2902's bipolar inputs draw more bias current than CMOS alternatives.

Impormasyon ng Talumpati sa Engineering for LM2902PWRE4 — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose the LM2902PWRE4 when you need a proven, low-cost quad op amp for single-supply 12V-24V automotive or industrial signal conditioning, ground-referenced sensor amplification, or slow comparator functions, and your BOM must stay on the classic LM2902 line. Choose LM2902PWR or LM2902PWRG4 if your purchasing system prefers the current non-E4 order codes - they are the identical device. Choose LM2902BPWR for new designs: same footprint, wider 3V to 36V supply, and lower offset per TI's drop-in compatibility statement. Choose LM2902YPT (ST) as a cross-brand automotive-grade second source. Avoid this part and select a rail-to-rail CMOS quad (for example the TS974) when operating at 3.3V/5V, when outputs must swing to the positive rail, or when high-impedance sources demand lower bias current; select a precision quad when sub-millivolt offset matters.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto LM2902PWR LM2902PWRG4 LM2902KPWE4 LM2902YPT
Package 14-TSSOP (PW) 14-TSSOP (PW) - same 14-TSSOP (PW) - same 14-TSSOP (PW) - same 14-TSSOP - same
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments STMicroelectronics
Channels 4 4 4 4 4
Gain Bandwidth Product 1.2 MHz 1.2 MHz 1.2 MHz 1.2 MHz 1.2 MHz
Drop-in Upgrade Path LM2902B (3V-36V, lower offset) LM2902B (same) LM2902B (same) LM2902B (same) ST automotive-grade LM2902 variants
RoHS Compliance Compliant (E4 suffix) Compliant Compliant (G4 = green packing) Compliant (E4 suffix) Compliant

Pangunahing mga Pagkakaiba

  • Improved-offset drop-in upgrade available (kumpara saLM2902BPWR)
  • Ground-sensing bipolar inputs (kumpara saTS974IDT)
  • Multi-vendor second sourcing (kumpara saLM2902YPT)

Talaan ng Disenyo

Do not treat the LM2902 as rail-to-rail: the input common-mode range includes the negative rail but stops short of the positive rail, and the output saturates well below the positive rail at load. Circuits biased near the positive rail will clip or lose phase margin. Also remember the 2 mV typical offset - at gains above 100, offset contributes over 200 mV of output error, so either calibrate digitally or select the improved-offset LM2902B BA grade for precision channels.

Place a 100 nF ceramic decoupling capacitor within a few millimeters of the V+ pin (pin 4) to the ground/negative-supply pin (pin 11), plus bulk 10 uF at the board level. Because the four amplifiers share one supply pair, fast switching on one channel can couple into others - keep high-current or comparator channels away from precision gain channels, and route sensitive input traces short with guard ground pours. The TSSOP-14 has no exposed pad, so thermal relief relies on trace copper.

The 1.2 MHz gain-bandwidth product requires closed-loop bandwidth to stay below roughly 1/50 of GBW for flat, low-peak response; at gain 10, expect about 120 kHz usable bandwidth with mild peaking unless compensated. Driving capacitive loads directly (cables, long traces) reduces phase margin - isolate with a small series resistor (typically 50-100 ohm) at the output. Verify stability in simulation for gains above 50 or filter Q above 2.

Estimated: in single-supply use, dissipation per channel is roughly V+ times the quiescent current plus load current times output swing headroom; at 26V supply with light loads this stays well within the TSSOP-14 thermal capability, but four channels driving resistive loads near the positive rail simultaneously raises die temperature - check the datasheet theta-JA against your ambient maximum before finalizing the layout.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Walang Lead
Yes
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

The E4 suffix denotes TI's RoHS-compliant, lead-free tape-and-reel ordering option. AEC-Q100 qualification status for this specific orderable should be confirmed on the TI quality page.

Data napatotohanan sa: 2026-11-08 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

LM2902PWRE4 datasheet LM2902PWRE4 pinout LM2902PWRE4 equivalent LM2902PWRE4 replacement LM2902PWRE4 vs LM2902PWR LM2902PWRE4 price Texas Instruments LM2902PWRE4 LM2902 drop-in replacement LM324B LM2902 quad op amp TSSOP-14 pinout LM2902PWRE4 stock buy LM2902 automotive grade quad op amp LM2902 vs LM324 difference

Mga kaugnay na Mga Komponente at mga Tuntunin

Texas Instruments LM2902PWRE4 LM2902 LM2902PWR LM2902PWRG4 LM2902KPWE4 LM2902BPWR LM2902YPT STMicroelectronics LM324 LM324B operational amplifier op amp quad op amp amplifier IC TSSOP-14 PW package surface mount RoHS gain-bandwidth product input offset voltage single-supply operation automotive electronics signal conditioning
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ