ROHM Semiconductor

LM2903FVM-TR - Dual Ground-Sense Comparator | ROHM Semiconductor

MPN: LM2903FVM-TR ✓ Nakahanda
3 V to 32 V Vdss 8-pin MSOP Package
MOQ: 1 |

LM2903FVM-TR Ulas

The ROHM Semiconductor LM2903FVM-TR is a dual ground-sense comparator with an operating voltage range of 3 V to 32 V, supplied in an 8-MSOP package. It combines two comparator channels, a common-mode input range intended for ground-sense applications, and low supply-current operation for use across industrial, automotive, and embedded control systems. The -TR ordering code identifies the tape-and-reel shipping configuration.

A ground-sense comparator is a voltage comparator optimized for detecting signals near the lower end of its supply range. Within the broader semiconductor hierarchy, it belongs to the analog IC, comparator, and signal-conditioning categories. Its two channels can monitor separate low-voltage nodes, compare input thresholds, and produce logic-compatible decisions for control systems where sensing close to ground improves measurement resolution.

ROHM describes the LM2903FVM as a two-channel ground-sense comparator with a wide 3 V to 32 V operating range and low supply current. Distributor technical summaries identify the device as a dual, general-purpose, open-collector comparator in an 8-pin MSOP package. The dual-channel configuration reduces component count when two independent ground-related thresholds must be evaluated in the same circuit.

The open-collector output architecture allows the output node to be pulled up to an external supply, making the interface suitable for wired logic levels, system-level fault signaling, and retrofit designs based on open-collector comparators. Because the output transistor is not driven actively high, external pull-up resistors determine the high output voltage and must be selected for the target interface. The output transistor also provides a practical way to combine comparator indications when wired logic functions are required.

Typical uses include monitoring low-voltage power rails, detecting undervoltage conditions, checking sensor returns near ground, and implementing threshold-based protection in industrial or automotive equipment. Because the device supports operation up to 32 V according to the manufacturer product page, it is useful in systems whose supply voltage exceeds the range of many low-voltage comparator ICs. The -40 °C to 125 °C temperature range supports operation across extended industrial temperature environments.

Design the input network so the sensed voltages remain within the comparator's specified common-mode limits, and account for input offset and propagation delay when setting a threshold. Select the pull-up resistor using the required output rise time, load capacitance, and allowable sink current. Place the device and its bypass capacitor near the protected circuit, and route sensitive input traces away from switching nodes to reduce false threshold transitions.

This product page combines manufacturer information, package details, sourcing guidance, application analysis, and pin-compatible replacement screening. It also distinguishes true same-footprint drop-in choices from devices that merely perform a similar comparison function, helping engineers evaluate PCB reuse without making changes that could compromise signal behavior or application conditions.

Mga alternatibo na pwedeng ilagay na LM2903FVM-TR — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

Wala ng magagamit na drop-in alternatibo para sa produkto na ito.

Hilingin ang Alternatibo

LM2903FVM-TR Mga Pinakamataas na Rating at Electrical Characteristics

Comparator Type Dual ground-sense comparator
Number of Channels 2 channels
Manufacturer Stated Operating Voltage Range 3 V to 32 V
Distributor Stated Supply Voltage Range 3 V to 36 V
Hanay ng Temperature na Operasyon -40 °C to +125 °C
Type ng Output Open-collector
Comparator Classification Standard, general-purpose comparator
Packhaging 8-pin MSOP
Shipping Configuration Tape and reel (TR)
Uri ng Pagpapasok Surface mount

Gabay sa Pin Configuration ng LM2903FVM-TR 8-pin msop

Pin configuration para sa LM2903FVM-TR (8-pin msop package). Ang analog component na ito ay may input, output, at power supply pins. Sumangguni sa datasheet ng manufacturer para sa offset null, compensation, at enable pin configurations. Perpekto para sa signal conditioning at amplifier circuits.

Pinout diagram ng 8-pin msop package para sa LM2903FVM-TR

Wala ng detalyadong pinout data na magagamit para sa LM2903FVM-TR.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

LM2903FVM-TR ay nararapat para sa 6 aplikasyons: Industrial Undervoltage Monitoring, Automotive Low-Level Signal Detection, Ground-Referenced Sensor Interfacing, Power Rail Window Detection, Battery Charger Status Supervision, Test and Measurement Threshold Detection.

🏭

Industrial Undervoltage Monitoring

The LM2903FVM-TR fits industrial undervoltage monitoring because two independent comparator channels can evaluate a low-voltage rail and a related control signal near ground. Its 3 V to 32 V manufacturer-stated operating range suits equipment powered above low-voltage logic levels, while the open-collector outputs allow external pull-ups to match the system logic. Engineers should verify input offset and propagation delay against the smallest fault that must be detected, and should include the pull-up resistor and supply bypass capacitor in the protection scheme.

🚗

Automotive Low-Level Signal Detection

The LM2903FVM-TR can support low-level signal detection in automotive and industrial-control environments where a fault signal is defined near ground. Its two channels reduce the number of comparator packages needed for paired detections, and the -40 °C to 125 °C distributor-listed temperature range covers extended ambient conditions. The open-collector output can sink a system fault line while an external pull-up defines the inactive voltage. Production automotive use still requires confirmation of qualification status and all ordering-option requirements.

🧩

Ground-Referenced Sensor Interfacing

The LM2903FVM-TR is appropriate for ground-referenced sensor interfacing when the signal of interest lies close to the lower supply rail. One channel can establish a reference threshold while the other evaluates the sensor output, producing an open-collector indication for an ADC or control input. The 8-MSOP package helps preserve board area in compact signal-conditioning modules. Designers must check the specified common-mode range and input offset before choosing resistor values for the sensor network.

⚡

Power Rail Window Detection

The two channels in the LM2903FVM-TR can participate in a rail-window or dual-threshold supervision circuit, allowing a system to flag both an abnormal low condition and another related limit. The manufacturer-stated 3 V to 32 V operating range supports use in higher-voltage industrial systems, while open-collector outputs permit wired fault signaling. Set thresholds with resistor networks whose tolerance and temperature drift are acceptable, and account for channel-to-channel and propagation-delay behavior during fault sequencing.

🔋

Battery Charger Status Supervision

The LM2903FVM-TR can supervise battery-related signals that remain close to ground, including charge-state or protection indications. The dual-channel arrangement can monitor two nodes when the signals share a suitable common-mode range, and the open-collector outputs can be pulled up to the charger-control logic. The 3 V to 32 V operating range accommodates supply conditions above conventional 5 V logic. Validate the battery chemistry, input limits, fault timing, and pull-up voltage against the complete charger design.

🖥️

Test and Measurement Threshold Detection

The LM2903FVM-TR is useful in compact test equipment for comparing a low-level measurement node with a threshold and driving an open-collector pass, fail, or limit indication. Two channels can monitor complementary limits without duplicating the comparator package, helping reduce board area in portable instrumentation. The -40 °C to 125 °C listed temperature range supports industrial test environments, but precision measurements should account for input offset, propagation delay, resistor tolerance, and any required input filtering.

What is LM2903FVM-TR?
The LM2903FVM-TR is a dual ground-sense comparator from ROHM Semiconductor with two comparator channels and an open-collector output architecture. According to the ROHM product page, the device operates from 3 V to 32 V and is intended for ground-sense applications. Distributor information identifies the package as 8-MSOP and the -TR suffix as a tape-and-reel shipping configuration.
What are the key specifications of LM2903FVM-TR that engineers should know?
The LM2903FVM-TR combines two ground-sense comparator channels, open-collector outputs, a 3 V to 32 V manufacturer-stated operating range, and an 8-MSOP package. ROHM also characterizes the device as having low supply current, while distributor records list operation from -40 °C to 125 °C. These characteristics make it relevant to low-level sensing, fault detection, and industrial control circuits operating above low-voltage logic rails.
What is the operating voltage of LM2903FVM-TR?
The LM2903FVM-TR operates from 3 V to 32 V according to the official ROHM product page. A distributor product summary lists a broader 3 V to 36 V supply-voltage description, so the manufacturer page should be used as the primary reference for design limits. Confirm the complete electrical limits in the ROHM datasheet before applying either figure to a new design.
Where can I download the LM2903FVM-TR datasheet PDF?
The official LM2903FVM datasheet and supporting product information are available from the ROHM product page linked on this page. The product page identifies the device as a two-channel ground-sense comparator and provides access to its technical documentation. Use the pin-description table and electrical-characteristics section in the manufacturer datasheet when assigning PCB nets and calculating thresholds.
Where can I find the LM2903FVM-TR pinout?
The LM2903FVM-TR pinout is shown in the manufacturer datasheet for the 8-MSOP package, while this page displays the package-level image associated with the selected MSOP-8 footprint. Use the ROHM pin-description table to map supply, output, and comparator-input nets exactly. Do not infer a pin function from another LM2903 package because the physical pin arrangement can differ by ordering code.
Is LM2903FVM-TR suitable for automotive and industrial systems?
The LM2903FVM-TR is suitable for many industrial and automotive-style signal-monitoring circuits because ROHM specifies a 3 V to 32 V operating range and distributor records list a -40 °C to 125 °C temperature range. Automotive qualification status is not established by those electrical ratings alone. Confirm AEC-Q100 qualification, production grade, and all ordering requirements before using the device in a safety- or vehicle-critical function.
How should the LM2903FVM-TR output pull-up resistor be selected?
The LM2903FVM-TR output pull-up resistor should be selected from the required logic-high voltage, output leakage current, sink-current limit, load capacitance, and target rise time. A lower resistance produces a faster rising edge but increases sink current when the open-collector transistor is on; a higher resistance reduces power dissipation but can slow the edge. Use the datasheet output-current and capacitance limits to establish the valid range.
Can LM2903FVM-TR monitor a low-voltage power rail near ground?
Yes, the LM2903FVM-TR is specifically positioned as a ground-sense comparator for detecting low-level signals near ground. Its two channels can monitor separate low-voltage nodes or implement two threshold decisions within one 8-MSOP device. The usable input range, input offset voltage, and propagation delay must be checked against the smallest rail fault that the system must detect.
What can replace LM2903FVM-TR?
A valid replacement for LM2903FVM-TR must use the same 8-MSOP footprint, provide pin-to-pin channel functions, and remain compatible with the intended supply and input-voltage conditions. The available cross-reference results did not establish five verified same-package substitutes. Treat parts offered only as functionally similar or in SOIC, TSSOP, and DIP packages as redesign alternatives rather than true drop-in replacements.
Is LM2903VQPWR the same as LM2903FVM-TR?
No, LM2903VQPWR is not a footprint-identical replacement for LM2903FVM-TR because the former is listed in an 8-TSSOP package while the target uses an 8-MSOP package. Although both belong to the LM2903 comparator family and may perform similar dual-channel comparisons, changing package geometry requires PCB layout changes. Use LM2903VQPWR only when the board footprint and assembly process can accommodate TSSOP.
What is the best TI equivalent for LM2903FVM-TR?
The TI LM2903 is a pin-for-pin functional alternative in supported package options, but it is not a verified drop-in substitute for the LM2903FVM-TR in the 8-MSOP footprint. The package body, lead geometry, and pin arrangement must match exactly before board-level interchange is claimed. For an existing 8-MSOP design, verify the TI package drawing and pin table or redesign the footprint for the alternative.
When should I choose LM2903FVM-TR over a lower-voltage comparator?
Choose LM2903FVM-TR when two ground-level threshold functions must be implemented in one device and the system supply may extend above the operating range of low-voltage comparators. Its 3 V to 32 V manufacturer-stated range, dual ground-sense architecture, and 8-MSOP package reduce component count in compact industrial signal-conditioning boards. Select a different comparator when rail-to-rail input operation, response speed, or output type is the dominant requirement.
Is LMV393 a drop-in replacement for LM2903FVM-TR?
The LMV393 may be considered in a redesigned low-voltage circuit, but the available cross-reference material does not establish it as a drop-in replacement for the LM2903FVM-TR in every operating condition. Compatibility depends on package, input common-mode range, supply voltage, output behavior, and propagation delay. Use the manufacturer pin and electrical tables to confirm each condition before substituting it into a 3 V to 32 V design.
Where can I request a quote for LM2903FVM-TR?
Use the Request a Quote form on this page to request current commercial terms, stock status, and lead time for LM2903FVM-TR. The form allows the exact manufacturer part number and tape-and-reel ordering code to be identified without relying on a generic category listing. Confirm the requested quantity, delivery schedule, and traceability requirements with the supplier before releasing a production order.
What is the lead time for LM2903FVM-TR?
The current production lead time for LM2903FVM-TR should be requested through the Request a Quote form on this page. Lead time can vary with order quantity, inventory position, quality documentation, and delivery location. Because the -TR suffix denotes tape-and-reel packaging, include reel format and quantity requirements in the request to obtain an actionable manufacturing schedule.

Impormasyon ng Talumpati sa Engineering for LM2903FVM-TR — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose the LM2903FVM-TR for a compact dual-channel ground-sense design that uses the 8-MSOP footprint and may operate across a wider supply range than ordinary low-voltage comparators. Its two channels are useful when independent ground-level thresholds, sensor limits, or fault signals must be monitored without adding a second comparator package. The open-collector architecture is valuable for wired fault buses and systems that choose the pull-up voltage independently. Before choosing it, verify the actual input common-mode range, offset voltage, propagation delay, output sink current, and temperature limits against the worst-case sensing conditions. A device in a different package should not be treated as a direct replacement even if it shares the LM2903 family name. If the design requires rail-to-rail input behavior, faster response, or a push-pull output, select a comparator specifically designed for those characteristics and redesign the footprint as necessary.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto
Package 8-MSOP
Brand ROHM Semiconductor
Comparator Channels 2 channels
Comparator Type Ground-sense comparator
Manufacturer Stated Operating Voltage Range 3 V to 32 V
Distributor Stated Supply Voltage Range 3 V to 36 V
Output Type Open-collector
Operating Temperature Range -40 °C to +125 °C

Talaan ng Disenyo

Place the LM2903FVM-TR close to the sensed nodes and route the input nets away from power-switching nodes, relay contacts, and high-current return paths. Keep the ground reference short and connect the comparator supply bypass capacitor to the device ground using a low-impedance path. Because small threshold errors can create false transitions, use guarded traces and a quiet analog-ground return where the circuit architecture permits it.

Do not treat the open-collector output as a push-pull logic output. Every channel requires an external pull-up resistor when a valid high output is needed. Select that resistor using the desired high voltage, output leakage current, sink-current capability, load capacitance, and required rise time. A resistor that is too small can overload the output transistor, while one that is too large can create a slow or noisy transition.

Account for input offset voltage, propagation delay, and any noise present near the sensing threshold when defining fault-detection time. If a slow transition at the threshold causes chatter, add appropriate hysteresis with positive feedback rather than relying on a larger supply bypass capacitor alone. Verify the hysteresis network against the ROHM input bias and output limits so the added feedback does not disturb the sensed voltage.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

No explicit compliance declarations or automotive-qualification statement appear in the referenced manufacturer page text or distributor summaries.

Data napatotohanan sa: 2026-11-17 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

lm2903fvm rohm LM2903FVM-TR datasheet LM2903FVM-TR specifications LM2903FVM-TR pinout LM2903FVM-TR datasheet pdf LM2903FVM-TR equivalent LM2903FVM-TR replacement LM2903FVM-TR cross reference LM2903FVM-TR MSOP footprint LM2903FVM-TR application circuit LM2903FVM-TR price LM2903FVM-TR stock

Mga kaugnay na Mga Komponente at mga Tuntunin

ROHM Semiconductor LM2903FVM-TR LM2903FVM LM2903VQPWR LM2903 LM2903B LMV393 ground-sense comparator comparator analog comparator analog IC semiconductor open-collector output MSOP-8 surface mount dual-channel comparator low-voltage sensing undervoltage monitoring industrial control automotive electronics power-supply supervision input offset voltage propagation delay
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ