LM2903FVM-TR - Dual Ground-Sense Comparator | ROHM Semiconductor
MPN: LM2903FVM-TR ✓ AktifLM2903FVM-TR Genel Bakış
A ground-sense comparator is a voltage comparator optimized for detecting signals near the lower end of its supply range. Within the broader semiconductor hierarchy, it belongs to the analog IC, comparator, and signal-conditioning categories. Its two channels can monitor separate low-voltage nodes, compare input thresholds, and produce logic-compatible decisions for control systems where sensing close to ground improves measurement resolution.
ROHM describes the LM2903FVM as a two-channel ground-sense comparator with a wide 3 V to 32 V operating range and low supply current. Distributor technical summaries identify the device as a dual, general-purpose, open-collector comparator in an 8-pin MSOP package. The dual-channel configuration reduces component count when two independent ground-related thresholds must be evaluated in the same circuit.
The open-collector output architecture allows the output node to be pulled up to an external supply, making the interface suitable for wired logic levels, system-level fault signaling, and retrofit designs based on open-collector comparators. Because the output transistor is not driven actively high, external pull-up resistors determine the high output voltage and must be selected for the target interface. The output transistor also provides a practical way to combine comparator indications when wired logic functions are required.
Typical uses include monitoring low-voltage power rails, detecting undervoltage conditions, checking sensor returns near ground, and implementing threshold-based protection in industrial or automotive equipment. Because the device supports operation up to 32 V according to the manufacturer product page, it is useful in systems whose supply voltage exceeds the range of many low-voltage comparator ICs. The -40 °C to 125 °C temperature range supports operation across extended industrial temperature environments.
Design the input network so the sensed voltages remain within the comparator's specified common-mode limits, and account for input offset and propagation delay when setting a threshold. Select the pull-up resistor using the required output rise time, load capacitance, and allowable sink current. Place the device and its bypass capacitor near the protected circuit, and route sensitive input traces away from switching nodes to reduce false threshold transitions.
This product page combines manufacturer information, package details, sourcing guidance, application analysis, and pin-compatible replacement screening. It also distinguishes true same-footprint drop-in choices from devices that merely perform a similar comparison function, helping engineers evaluate PCB reuse without making changes that could compromise signal behavior or application conditions.
Drop-in alternatifler için LM2903FVM-TR — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu ürüne yer değiştirme seçenekleri mevcut değil.
Alternatifleri Talep EdinLM2903FVM-TR Maksimum Değerlendirmeler & Elektriksel Özellikler
| Comparator Type | Dual ground-sense comparator |
| Number of Channels | 2 channels |
| Manufacturer Stated Operating Voltage Range | 3 V to 32 V |
| Distributor Stated Supply Voltage Range | 3 V to 36 V |
| İşletim Sıcaklığı Aralığı | -40 °C to +125 °C |
| Çıkış Türü | Open-collector |
| Comparator Classification | Standard, general-purpose comparator |
| Paket | 8-pin MSOP |
| Shipping Configuration | Tape and reel (TR) |
| Montaj Türü | Surface mount |
LM2903FVM-TR 8-pin msop Pin Yapısı Kılavuzu
LM2903FVM-TR (8-pin msop paket) için pin yapısı. Bu analog bileşen, giriş, çıkış ve güç besleme pinleri içerir. Ofset null, telafi ve etkinleştirme pin yapılandırmaları için üretici veri kitapçığını referans alın. Sinyal işleme ve güç amplifikasyon devreleri için mükemmel bir bileşendir.
Ayrıntılı pin çıkış verisi mevcut değil: LM2903FVM-TR.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
LM2903FVM-TR için uygundur 6 uygulamas: Industrial Undervoltage Monitoring, Automotive Low-Level Signal Detection, Ground-Referenced Sensor Interfacing, Power Rail Window Detection, Battery Charger Status Supervision, Test and Measurement Threshold Detection.
Industrial Undervoltage Monitoring
The LM2903FVM-TR fits industrial undervoltage monitoring because two independent comparator channels can evaluate a low-voltage rail and a related control signal near ground. Its 3 V to 32 V manufacturer-stated operating range suits equipment powered above low-voltage logic levels, while the open-collector outputs allow external pull-ups to match the system logic. Engineers should verify input offset and propagation delay against the smallest fault that must be detected, and should include the pull-up resistor and supply bypass capacitor in the protection scheme.
Automotive Low-Level Signal Detection
The LM2903FVM-TR can support low-level signal detection in automotive and industrial-control environments where a fault signal is defined near ground. Its two channels reduce the number of comparator packages needed for paired detections, and the -40 °C to 125 °C distributor-listed temperature range covers extended ambient conditions. The open-collector output can sink a system fault line while an external pull-up defines the inactive voltage. Production automotive use still requires confirmation of qualification status and all ordering-option requirements.
Ground-Referenced Sensor Interfacing
The LM2903FVM-TR is appropriate for ground-referenced sensor interfacing when the signal of interest lies close to the lower supply rail. One channel can establish a reference threshold while the other evaluates the sensor output, producing an open-collector indication for an ADC or control input. The 8-MSOP package helps preserve board area in compact signal-conditioning modules. Designers must check the specified common-mode range and input offset before choosing resistor values for the sensor network.
Power Rail Window Detection
The two channels in the LM2903FVM-TR can participate in a rail-window or dual-threshold supervision circuit, allowing a system to flag both an abnormal low condition and another related limit. The manufacturer-stated 3 V to 32 V operating range supports use in higher-voltage industrial systems, while open-collector outputs permit wired fault signaling. Set thresholds with resistor networks whose tolerance and temperature drift are acceptable, and account for channel-to-channel and propagation-delay behavior during fault sequencing.
Battery Charger Status Supervision
The LM2903FVM-TR can supervise battery-related signals that remain close to ground, including charge-state or protection indications. The dual-channel arrangement can monitor two nodes when the signals share a suitable common-mode range, and the open-collector outputs can be pulled up to the charger-control logic. The 3 V to 32 V operating range accommodates supply conditions above conventional 5 V logic. Validate the battery chemistry, input limits, fault timing, and pull-up voltage against the complete charger design.
Test and Measurement Threshold Detection
The LM2903FVM-TR is useful in compact test equipment for comparing a low-level measurement node with a threshold and driving an open-collector pass, fail, or limit indication. Two channels can monitor complementary limits without duplicating the comparator package, helping reduce board area in portable instrumentation. The -40 °C to 125 °C listed temperature range supports industrial test environments, but precision measurements should account for input offset, propagation delay, resistor tolerance, and any required input filtering.
Mühendislik referans verileri: LM2903FVM-TR — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün |
|---|---|
| Package | 8-MSOP |
| Brand | ROHM Semiconductor |
| Comparator Channels | 2 channels |
| Comparator Type | Ground-sense comparator |
| Manufacturer Stated Operating Voltage Range | 3 V to 32 V |
| Distributor Stated Supply Voltage Range | 3 V to 36 V |
| Output Type | Open-collector |
| Operating Temperature Range | -40 °C to +125 °C |
Tasarım Notları
Place the LM2903FVM-TR close to the sensed nodes and route the input nets away from power-switching nodes, relay contacts, and high-current return paths. Keep the ground reference short and connect the comparator supply bypass capacitor to the device ground using a low-impedance path. Because small threshold errors can create false transitions, use guarded traces and a quiet analog-ground return where the circuit architecture permits it.
Do not treat the open-collector output as a push-pull logic output. Every channel requires an external pull-up resistor when a valid high output is needed. Select that resistor using the desired high voltage, output leakage current, sink-current capability, load capacitance, and required rise time. A resistor that is too small can overload the output transistor, while one that is too large can create a slow or noisy transition.
Account for input offset voltage, propagation delay, and any noise present near the sensing threshold when defining fault-detection time. If a slow transition at the threshold causes chatter, add appropriate hysteresis with positive feedback rather than relying on a larger supply bypass capacitor alone. Verify the hysteresis network against the ROHM input bias and output limits so the added feedback does not disturb the sensed voltage.
Uyumluluk Bilgisi
No explicit compliance declarations or automotive-qualification statement appear in the referenced manufacturer page text or distributor summaries.