Texas Instruments

LM2904AVQDRG4Q1 - 26V Dual 700kHz Op Amp | Texas Instruments

MPN: LM2904AVQDRG4Q1 ✓ Nakahanda
26 V Vdss 0.7 mA typical per amplifier Id 8-SOIC, 0.154 in body width Package
MOQ: 1 |

LM2904AVQDRG4Q1 Ulas

The Texas Instruments LM2904AVQDRG4Q1 is an automotive-grade, dual general-purpose operational amplifier with a 26 V supply rating, 700 kHz gain-bandwidth product, and 0.3 V/µs slew rate, housed in an 8-SOIC package. It combines two independent amplifiers with internal frequency compensation and is qualified to AEC-Q100 specifications for automotive applications.

An operational amplifier is a high-gain, differential-input analog amplifier that uses external feedback to set its closed-loop gain and signal behavior. Within the broader semiconductor hierarchy, this device belongs to the linear-amplifier family and ultimately to the amplifier-IC category. The LM2904 family is widely used for low-frequency signal conditioning because it combines reasonably high open-loop gain, broad supply-voltage capability, low supply-current consumption, and a conventional industry-standard pin arrangement.

The most prominent operating characteristics are its 26 V maximum supply rating, 700 kHz gain-bandwidth product, and 0.3 V/µs slew rate. Each channel supports single-supply operation, while the two amplifiers can also be used with suitable bipolar supplies. The device is intended for general-purpose amplification and includes two circuits in one 8-SOIC package, reducing board area compared with separate single amplifiers.

Its frequency-compensated architecture is suited to non-inverting, inverting, summing, comparator-like, and transducer-amplification stages operating within the device's bandwidth. The automotive qualification is important where operating-temperature robustness and controlled quality are required. Exact input-offset voltage, input-bias current, output-current capability, common-mode limits, and temperature limits must be confirmed in the manufacturer datasheet for the selected grade and package.

Typical uses include low-level sensor conditioning, transducer amplifiers, DC gain stages, active filters, audio and communications interfaces, and automotive signal-processing modules. The two-amplifier configuration is particularly useful when a board needs two similar signal paths in one package, such as differential sensing or paired filter stages.

Design with the 700 kHz bandwidth and 0.3 V/µs slew rate in mind. Keep input and feedback routing short, observe the supply and common-mode limits from the manufacturer datasheet, and verify output swing at the intended load. Decoupling capacitors should be placed close to the supply pins to reduce supply impedance and switching noise.

This product page combines the exact ordering information, package details, qualified family information, verified drop-in candidates, and practical design considerations needed to plan an automotive dual-op-amp design before committing the LM2904AVQDRG4Q1 to a PCB.

Mga alternatibo na pwedeng ilagay na LM2904AVQDRG4Q1 — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

Variante sa Seri na ito

Katulad na modelo sa serye na katugma sa pagpasok LM2904AVQDRG4Q1 (parehas na form factor at footprint) — pagkakaiba sa Package, Amplifier Type, Number of Channels, Operating Temperature Range, Slew Rate.

Texas Instruments
Package: 8-pin SOIC (D)
Amplifier Type: Dual general-purpose operational amplifier
Number of Channels: 2 channels
Ikabit sa LM2904AVQDRG4Q1 →
Texas Instruments
Package: SOIC-8 (D)
Number of Channels: 2 (Dual)
Operating Temperature Range: -40 C to +125 C
Ikabit sa LM2904AVQDRG4Q1 →
Texas Instruments
Package: 8-SOIC (D)
Amplifier Type: General Purpose
Number of Channels: 2
Ikabit sa LM2904AVQDRG4Q1 →
Texas Instruments
Package: 8-pin SOIC
Amplifier Type: 2-circuit operational amplifier
Operating Temperature Range: -40 °C to +85 °C

LM2904-Q1

✅ Drop-In
📦 8-SOIC
Automotive family rating retained; exact orderable suffix must be selected to match supply, qualification, and reel configuration, with 0% identified voltage or bandwidth difference.

📋 Alternatibo na Reference (hindi sa katalogo)

LM2904DR

✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo
Texas Instruments
📦 8-SOIC
2 · 3 V to 26 V · ±1.5 V to ±13 V · 700 kHz · 0.3 V/us · 2 mV (typical) · 500 uA (typical) · 0.7 mA (typical)

Magkontak para sa presyo

Tingnan ang Datasheet →

LM2904BIDR

✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo
Texas Instruments
📦 8-SOIC
Texas Instruments · Industry-standard dual operational amplifier · 2 (Dual) · 3 V to 36 V · +/-1.5 V to +/-18 V · 1.2 MHz · 0.5 V/us (typical) · 0.5 mV typical / 3 mV maximum

Magkontak para sa presyo

Tingnan ang Datasheet →

LM2904BA

✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo
📦 8-SOIC
The updated A-grade family provides higher bandwidth than the 700 kHz target; the exact suffix must be checked for automotive qualification, supply rating, and offset grade.

📋 Alternatibo na Reference (hindi sa katalogo)

LM2904M/NOPB

✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo
Texas Instruments
📦 8-SOIC
2-circuit operational amplifier · 2 units · 26 V · 700 kHz · Single or split supply · -40 °C to +85 °C · 8-pin SOIC · Surface mount

Magkontak para sa presyo

Tingnan ang Datasheet →

LM2904AVQDRG4Q1 Mga Pinakamataas na Rating at Electrical Characteristics

Amplifier Type General-purpose operational amplifier
Number of Amplifiers 2 circuits
Maximum Supply Voltage 26 V
Gain-Bandwidth Product 700 kHz
Slew Rate 0.3 V/µs
Architecture Frequency-compensated dual amplifier
Automotive Qualification AEC-Q100 qualified
Packhaging 8-SOIC, 0.154 in body width
Package Width 3.90 mm
Packaging Tape & Reel
Operating Supply Single supply or dual supply
Kuru-kuryente ng Pagbibigay 0.7 mA typical per amplifier

Pin Configuration ng LM2904AVQDRG4Q1

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
Pin 1 OUT1 — Amplifier 1 output
Pin 2 IN1- — Amplifier 1 inverting input
Pin 3 IN1+ — Amplifier 1 noninverting input
Pin 4 V- — Negative supply or ground connection
Pin 5 IN2+ — Amplifier 2 noninverting input
Pin 6 IN2- — Amplifier 2 inverting input
Pin 7 OUT2 — Amplifier 2 output
Pin 8 V+ — Positive supply connection

Tipikal na mga Gamit

LM2904AVQDRG4Q1 ay nararapat para sa 6 aplikasyons: Automotive Sensor Signal Conditioning, Transducer Amplifier, Active Audio Filtering, Industrial DC Gain Stage, Battery-Powered Monitoring, Communications Interface Amplifier.

🚗

Automotive Sensor Signal Conditioning

The LM2904AVQDRG4Q1 fits low-level automotive sensor conditioning because its two frequency-compensated channels can amplify and filter related signals within the 700 kHz bandwidth limit. Its 0.3 V/µs slew rate supports signals with moderate frequency content, while the 26 V supply rating accommodates automotive transient-protected rails. One channel can amplify the transducer and the other can form a filter or active gain stage. Because this is an AEC-Q100-qualified family member, engineers can use it in body, chassis, powertrain, or body-electronics modules after confirming operating-temperature range, common-mode limits, and output-swing requirements in the manufacturer datasheet.

⚡

Transducer Amplifier

The LM2904AVQDRG4Q1 is suitable for a general-purpose transducer-amplifier stage when sensor bandwidth and output amplitude remain within its 700 kHz gain-bandwidth product and 0.3 V/µs slew rate. The two channels allow a compact implementation with one channel providing signal gain and the second supporting filtering or offset correction. Low supply-current consumption of 0.7 mA typical per amplifier is useful in power-constrained circuits. Before selecting the device for a high-impedance sensor, verify input-bias-current and input-offset-voltage limits, because those values determine input-error contribution and whether an external bias or instrumentation stage is required.

🎧

Active Audio Filtering

The LM2904AVQDRG4Q1 can implement active filtering or gain-control stages in low-frequency audio and communications equipment when the desired signal bandwidth is comfortably below 700 kHz. Its 0.3 V/µs slew rate limits large-signal performance, so designers should calculate the maximum amplitude and frequency of the output waveform before relying on full output swing. The dual package also reduces board area by placing two linked filter or gain stages in one 8-SOIC footprint. The manufacturer datasheet should be consulted for output-current capability, load stability, noise, and output-swing boundaries before driving speaker, line, or higher-capacitance loads.

🏭

Industrial DC Gain Stage

The LM2904AVQDRG4Q1 supports non-inverting and inverting DC gain stages where the closed-loop bandwidth remains compatible with the 700 kHz gain-bandwidth product. A two-amplifier arrangement can implement gain followed by active filtering without requiring two separate packages. The 26 V rating provides headroom for protected industrial supply rails, although input common-mode and output-swing constraints still define the usable signal range. Use short feedback paths, maintain stable resistor values, and place supply-bypass capacitance close to pin 8 and the ground reference at pin 4 to limit parasitic feedback and improve transient behavior.

📱

Battery-Powered Monitoring

The LM2904AVQDRG4Q1 is suitable for battery-powered monitoring electronics where low supply-current consumption is important. The device draws 0.7 mA typical per amplifier and supports single-supply operation, allowing two low-power signal-conditioning channels in one 8-SOIC package. A monitoring system could use one channel to amplify a sensor output and the other to amplify a reference or battery-divider signal. Designers should confirm the minimum operating supply, common-mode input range, and output-swing limits for the selected automotive suffix, because those constraints determine whether measurements remain accurate near the bottom of the supply range.

🌐

Communications Interface Amplifier

The LM2904AVQDRG4Q1 can serve as a general-purpose communications-interface amplifier for low- and moderate-frequency baseband stages. Its 700 kHz gain-bandwidth product is appropriate for slower control or measurement paths rather than high-speed data lines, while the 0.3 V/µs slew rate helps preserve large-signal behavior within that band. The dual-channel package supports a transmit or receive gain path plus buffering. Layout should minimize loop area around the high-impedance inputs and feedback components, and supply decoupling should be placed close to the device to prevent supply ripple from modulating the communication signal.

Buod ng mga Inirekomendang Produkto

LM2904-Q1 Automotive dual operational-amplifier family Ginagamit sa: Automotive Sensor Signal Conditioning, Battery-Powered Monitoring LM2904B Higher-bandwidth dual operational-amplifier family Ginagamit sa: Automotive Sensor Signal Conditioning, Active Audio Filtering, Communications Interface Amplifier LM2904 Standard dual transducer-amplifier family Ginagamit sa: Transducer Amplifier, Industrial DC Gain Stage, Communications Interface Amplifier MC3403DR Texas Instruments Ginagamit sa: Transducer Amplifier LM2904M/NOPB Texas Instruments Ginagamit sa: Active Audio Filtering, Battery-Powered Monitoring LM2904BA Updated dual operational-amplifier family Ginagamit sa: Industrial DC Gain Stage
What are the key specifications of LM2904AVQDRG4Q1 that engineers should know?
The LM2904AVQDRG4Q1 is a dual, automotive-grade operational amplifier rated for 26 V, with a 700 kHz gain-bandwidth product and a 0.3 V/µs slew rate. It is packaged in an 8-SOIC and contains two frequency-compensated amplifier circuits. According to the Texas Instruments LM2904-Q1 product information, the family is qualified to AEC-Q100 specifications for automotive applications.
What is the operating voltage of LM2904AVQDRG4Q1?
The LM2904AVQDRG4Q1 supports operation up to a 26 V supply rating. The device is designed for single-supply operation and can also be configured with bipolar supplies when the application requires positive and negative signal ranges. Exact input common-mode limits and output-swing limits must be checked in the manufacturer datasheet for the operating condition being designed.
Where can I download the LM2904AVQDRG4Q1 datasheet PDF?
The official Texas Instruments LM2904-Q1 product page provides access to the manufacturer datasheet and supporting documentation. A separate PDF copy is also listed by the Texas Instruments LM2904AVQDRG4Q1 datasheet reference. For design sign-off, use the TI-hosted copy so that the ordering information, electrical limits, automotive qualifications, and package drawings remain aligned with the released revision.
Where can I find the LM2904AVQDRG4Q1 pinout?
The LM2904AVQDRG4Q1 uses the standard 8-SOIC dual-operational-amplifier arrangement: OUT1 is pin 1, IN1− is pin 2, IN1+ is pin 3, V− is pin 4, IN2+ is pin 5, IN2− is pin 6, OUT2 is pin 7, and V+ is pin 8. Confirm the land pattern, exposed-pad status, and exact ordering suffix against the manufacturer datasheet before fabrication.
Is LM2904AVQDRG4Q1 suitable for automotive applications?
Yes, the LM2904AVQDRG4Q1 belongs to the Texas Instruments LM2904-Q1 automotive family and is qualified to AEC-Q100 specifications. The device combines two general-purpose amplifiers, a 26 V rating, a 700 kHz gain-bandwidth product, and an 8-SOIC package. Qualification does not remove the need to verify operating-temperature limits, transient requirements, and production-quality documentation for the specific vehicle platform.
Where to buy LM2904AVQDRG4Q1 online?
The most direct purchasing path on this page is the Request a Quote form, which can be used to ask for the exact LM2904AVQDRG4Q1 ordering code, reel quantity, current availability, and shipment options. Because the exact suffix identifies an automotive-qualified 8-SOIC tape-and-reel configuration, include the full MPN in the request to avoid accidental substitution with a different grade or packaging code.
What is the price of LM2904AVQDRG4Q1?
Current pricing for LM2904AVQDRG4Q1 is obtained through the Request a Quote form on this page. Enter the exact MPN and required reel quantity so the quote reflects the correct automotive-grade 8-SOIC tape-and-reel configuration. Quote requests are preferable to relying on a generic family price because suffix, qualification, quantity, and packaging can affect commercial availability.
What is the lead time for LM2904AVQDRG4Q1?
The current lead time should be confirmed through the Request a Quote form on this page using the complete LM2904AVQDRG4Q1 part number and required reel quantity. Include the intended delivery date in the request, especially for automotive production schedules. The form can provide an availability response tied to the exact MPN rather than to the broader LM2904 or LM2904-Q1 families.
Is LM2904AVQDRG4Q1 in stock?
Availability for the exact LM2904AVQDRG4Q1 automotive-qualified tape-and-reel configuration must be confirmed through the Request a Quote form on this page. Provide the quantity needed and the intended delivery date to obtain a current response. Because automotive suffixes and reel quantities are configuration-specific, family-level availability should not be treated as confirmation of the exact ordered device.
What can replace LM2904AVQDRG4Q1?
The closest validated drop-in choices are pin-compatible members of the Texas Instruments LM2904 family when their electrical limits meet the application requirements. LM2904B and LM2904BA offer higher-bandwidth alternatives, while the automotive LM2904-Q1 family retains the qualification class. A replacement must be checked for supply range, common-mode range, offset voltage, bias current, noise, stability, and AEC-Q100 documentation.
Is LM2904AVQDRG4Q1 the same as LM2904-Q1?
LM2904AVQDRG4Q1 is an orderable configuration of the Texas Instruments LM2904-Q1 automotive family, not an interchangeable designation for every LM2904-Q1 suffix. It specifies a dual amplifier in an 8-SOIC package supplied on tape and reel. The ordering code also determines qualification, temperature grade, reel configuration, and production details, so the complete suffix must be preserved during substitution.
When should I choose LM2904AVQDRG4Q1 over LM2904B?
Choose LM2904AVQDRG4Q1 when an AEC-Q100-qualified automotive dual op amp and the exact 8-SOIC tape-and-reel ordering configuration are required. Choose LM2904B when its higher bandwidth and updated functionality suit a non-automotive signal chain and automotive qualification is unnecessary. The choice should follow a comparison of every operating limit, not bandwidth alone.
Is LM2904AVQDRG4Q1 suitable for transducer amplifier applications?
The LM2904AVQDRG4Q1 can be used in a transducer-amplifier stage when the sensor bandwidth and signal amplitude fall within its 700 kHz gain-bandwidth product, 0.3 V/µs slew rate, and applicable input/output limits. It is a dual device, so one channel can amplify the sensor while the other performs filtering or active gain. Input bias current and offset requirements must be checked before use with high-impedance sensors.
What is the difference between LM2904AVQDRG4Q1 and LM2904B?
The LM2904AVQDRG4Q1 is an automotive-qualified member of the original LM2904-Q1 family with a 700 kHz gain-bandwidth product, while LM2904B is listed by Texas Instruments as an updated dual operational amplifier with higher bandwidth and up to 36 V operation. Both can serve general signal-conditioning roles, but their qualification, voltage range, bandwidth, and exact orderable suffixes determine whether one may replace the other.
What is the best Renesas equivalent for LM2904AVQDRG4Q1?
A specific Renesas MPN is not validated as a direct replacement for LM2904AVQDRG4Q1 in the available manufacturer cross-reference information. Renesas is identified among manufacturers offering LM2904 alternatives, but a board-level substitution still requires an exact 8-SOIC pinout and verification of supply range, offset, bias current, common-mode range, output swing, noise, and automotive qualification. Use the Request a Quote form if a qualified source must document a cross-brand replacement.

Impormasyon ng Talumpati sa Engineering for LM2904AVQDRG4Q1 — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose LM2904AVQDRG4Q1 when the design requires a dual general-purpose operational amplifier in an 8-SOIC package, a 26 V supply rating, 700 kHz gain-bandwidth product, and AEC-Q100 automotive qualification. Choose LM2904 when the same broad electrical class is needed but automotive qualification is irrelevant, provided the standard family limits meet the application. Choose LM2904B when its 1.2 MHz bandwidth and 36 V rating are valuable and its updated functional limits have been reviewed; its increased bandwidth does not by itself make it preferable in every circuit. LM2904BA can suit designs needing a newer grade family, but exact offset, qualification, temperature, and orderable-suffix requirements should be checked. LM2904M/NOPB is a standard-family option, not an automatic automotive substitute. For every alternative, verify pinout, supply range, common-mode range, output swing, stability, input error, and qualification before approving a drop-in change.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto LM2904-Q1 LM2904 LM2904B LM2904BA LM2904M/NOPB
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 8-SOIC 8-SOIC 8-SOIC 8-SOIC 8-SOIC 8-SOIC
Number of Amplifiers 2 2 2 2 2 2

Pangunahing mga Pagkakaiba

  • Automotive qualification is retained in the exact ordering family (kumpara saLM2904)
  • Higher-bandwidth upgrade is available without changing the 8-SOIC footprint (kumpara saLM2904B)
  • Two signal-processing channels share one package (kumpara saLM2904M/NOPB)

Talaan ng Disenyo

Place the positive-supply bypass capacitor immediately between pin 8 and the ground reference associated with pin 4, with the shortest and lowest-inductance path possible. If the two channels operate at different frequencies or analog levels, evaluate separate local bypass paths to prevent one channel's transient current from disturbing the other. Keep the input and feedback components close to their corresponding pins to minimize parasitic capacitance, which can alter closed-loop stability at high loop gain.

The two amplifier channels share an 8-SOIC package but have separate inputs and outputs; pin 4 is the negative supply or ground reference, while pin 8 is the positive supply. Route sensitive input nodes away from supply traces, clock edges, inductors, and switching-node copper. Maintain a quiet return path for each amplifier so output current and input bias current do not share a high-impedance ground segment.

Do not treat the 26 V rating as permission to place any signal directly on the supply pins. Verify input common-mode range, output swing, minimum supply voltage, input offset, bias current, and capacitive-load stability in the manufacturer datasheet. For a drop-in redesign, preserve the complete orderable suffix because LM2904, LM2904-Q1, LM2904B, and LM2904BA can differ in qualification, bandwidth, supply rating, or grade-specific limits even when their pin arrangement remains compatible.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Qualified
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

The LM2904-Q1 family is identified as qualified to AEC-Q100 specifications for automotive applications. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status are not established for the exact ordering code in the cited material.

Data napatotohanan sa: 2026-11-09 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

LM2904AVQDRG4Q1 datasheet LM2904AVQDRG4Q1 pinout LM2904AVQDRG4Q1 datasheet pdf LM2904AVQDRG4Q1 specifications LM2904AVQDRG4Q1 equivalent LM2904AVQDRG4Q1 replacement LM2904AVQDRG4Q1 drop-in replacement LM2904AVQDRG4Q1 vs LM2904B LM2904AVQDRG4Q1 8-SOIC Texas Instruments LM2904AVQDRG4Q1 LM2904AVQDRG4Q1 automotive op amp LM2904AVQDRG4Q1 price LM2904AVQDRG4Q1 stock LM2904AVQDRG4Q1 lead time LM2904AVQDRG4Q1 application circuit

Mga kaugnay na Mga Komponente at mga Tuntunin

Texas Instruments LM2904AVQDRG4Q1 LM2904-Q1 LM2904 LM2904B LM2904BA LM2904M/NOPB dual operational amplifier operational amplifier linear amplifier amplifier IC semiconductor frequency-compensated amplifier AEC-Q100 automotive electronics 8-SOIC SOIC family surface-mount package gain-bandwidth product slew rate common-mode input voltage range input offset voltage input bias current transducer amplifier active filter
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ