Texas Instruments

LM324N/NOPB - Low-Power Quad Op Amp | Texas Instruments

MPN: LM324N/NOPB ✓ Nakahanda
Single power supply Vdss 14-PDIP Package
MOQ: 1 |

LM324N/NOPB Ulas

The Texas Instruments LM324N/NOPB is a low-power quad operational amplifier containing four independent, high-gain, internally frequency-compensated amplifiers in a 14-pin PDIP package. It is designed to operate from a single power supply over a wide voltage range and is intended for general-purpose amplifier, transducer-amplifier, DC gain-block, and conventional op-amp circuits.

An operational amplifier is an analog signal-conditioning device that uses high open-loop gain and negative feedback to amplify voltage differences. The LM324 belongs to the general-purpose amplifier family, combining internal frequency compensation with a common-emitter output stage that can source and sink current. Placing four amplifiers in one 14-pin PDIP saves board area in analog circuits that need several independent signal-processing channels.

Key features include four amplifier circuits per package, internally frequency compensation, operation from a single power supply, and a wide input-voltage range. Each amplifier provides independent input, output, and power connections, allowing different sections of the device to process separate signals. The quad organization makes the LM324N/NOPB suitable for sensor conditioning, buffer stages, analog summation, and general instrumentation.

The internal compensation trades gain bandwidth for ease of use by eliminating the need for an external compensation network in typical closed-loop configurations. Because the amplifiers operate from one supply, the usable signal range depends on the supply voltage and the common-mode input limits. Engineers should check the manufacturer datasheet for input common-mode range, output swing, output-current capability, and stability requirements before fixing the gain and bypassing arrangement.

Typical applications include transducer-amplifier front ends, DC gain blocks, active filters, sensor interfaces, and general instrumentation. In a sensor-conditioning channel, one amplifier can amplify a bridge or resistive-transducer output while another channel provides buffering, reference conversion, or output amplification. The four independent amplifiers also allow parallel use for improved output-current capability or broader signal handling within one package.

When designing around the LM324N/NOPB, maintain adequate bypass capacitance at the supply pins and keep feedback-loop routing compact. Check input-bias-current effects at high source impedances, verify output swing at the intended load, and confirm that the selected gain and load remain compatible with the device’s stability characteristics. The PDIP package also requires adequate spacing from conductive surfaces and nearby heat sources.

This page consolidates the manufacturer description, package information, cross-reference findings, and application guidance for engineers evaluating the LM324N/NOPB. It also organizes same-package alternatives, practical circuit considerations, and side-by-side parameter coverage so that form, fit, function, and signal-chain trade-offs can be evaluated before PCB release.

Mga alternatibo na pwedeng ilagay na LM324N/NOPB — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

Variante sa Seri na ito

Katulad na modelo sa serye na katugma sa pagpasok LM324N/NOPB (parehas na form factor at footprint) — pagkakaiba sa Supply Configuration, Mounting Type, Package, Amplifier Type, Compensation.

Texas Instruments
Supply Configuration: Single or dual supply
Package: 14-pin PDIP
Amplifier Type: General-purpose operational amplifier
Texas Instruments
Mounting Type: Through-hole (THT)
Package: 14-PDIP (N package), through-hole
Amplifier Type: General Purpose, Voltage Feedback, Single Supply
Texas Instruments
Supply Configuration: Single or dual supply
Mounting Type: Surface mount
Package: 14-pin TSSOP (PW)
Texas Instruments
Supply Configuration: Single-supply capable
Package: 14-pin PDIP
Texas Instruments
Supply Configuration: Single supply or split supply
Package: 14-pin PDIP

LM324AN/NOPB

✅ Drop-In
Texas Instruments
📦 14-PDIP
4 · General Purpose, Voltage Feedback, Single Supply · 14-PDIP (N package), through-hole · 3 V to 30 V · 3 V to 36 V · 100 dB · 1.0 MHz · 0.5 V/us

Magkontak para sa presyo

Tingnan ang Datasheet →

LM324AN

✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo
Texas Instruments
📦 14-PDIP
General-purpose operational amplifier · 4 circuits · 4 outputs · 30 V · 1.2 MHz · 3 mV · Internally frequency-compensated · Single or dual supply

Magkontak para sa presyo

Tingnan ang Datasheet →

LM324APWR

✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo
Texas Instruments
📦 14-PDIP
4 circuits · General-purpose operational amplifier · 30 V · 1.2 MHz · 3 mV · 0°C to 70°C · 14-pin TSSOP (PW) · 14 pins

Magkontak para sa presyo

Tingnan ang Datasheet →

LM324N

✅ Drop-In
Texas Instruments
📦 14-DIP
4 independent amplifiers · Low-power quad operational amplifier · Standard general-purpose amplifier · High-gain, internally frequency-compensated amplifiers · Single-supply capable

Magkontak para sa presyo

Tingnan ang Datasheet →

LM324N

✅ Drop-In
Texas Instruments
📦 14-DIP
4 independent amplifiers · Low-power quad operational amplifier · Standard general-purpose amplifier · High-gain, internally frequency-compensated amplifiers · Single-supply capable

Magkontak para sa presyo

Tingnan ang Datasheet →

LM324N/NOPB Mga Pinakamataas na Rating at Electrical Characteristics

Number of Amplifiers 4 circuits
Amplifier Type Single operational amplifier
Topolohiya 4 independent, high-gain operational amplifiers
Compensation Internally frequency compensated
Supply Configuration Single power supply
Power Class Low power
Package Type 14-PDIP
Total Pin Count 14 pins
Uri ng Pagpapasok Through-hole
Primary Application Transducer amplifiers, DC gain blocks, and conventional op-amp circuits

Pin Configuration ng LM324N/NOPB

DIP-14 Package Pinout Diagram DIP-14 14-pin dual inline, 7.62mm pitch, JEDEC MS-001. 1 14 2 13 3 12 4 11 5 10 6 9 7 8 DIP-14
Pin 1 OUT1 — Amplifier 1 output
Pin 2 -IN1 — Amplifier 1 inverting input
Pin 3 +IN1 — Amplifier 1 non-inverting input
Pin 4 GND — Ground connection
Pin 5 +IN2 — Amplifier 2 non-inverting input
Pin 6 -IN2 — Amplifier 2 inverting input
Pin 7 OUT2 — Amplifier 2 output
Pin 8 OUT3 — Amplifier 3 output
Pin 9 -IN3 — Amplifier 3 inverting input
Pin 10 +IN3 — Amplifier 3 non-inverting input
Pin 11 GND — Ground connection
Pin 12 +IN4 — Amplifier 4 non-inverting input
Pin 13 -IN4 — Amplifier 4 inverting input
Pin 14 OUT4 — Amplifier 4 output

Tipikal na mga Gamit

LM324N/NOPB ay nararapat para sa 6 aplikasyons: Resistive Transducer Signal Conditioning, DC Gain and Reference Buffering, Industrial Sensor Interface, Active Audio and Control Filtering, General-Purpose Instrumentation, Power Supply Monitoring and Control Loops.

📡

Resistive Transducer Signal Conditioning

The LM324N/NOPB suits resistive-transducer front ends because it provides four independent high-gain amplifiers with internal frequency compensation and single-supply operation. One channel can amplify a strain-gauge, RTD, or resistive-sensor differential while the remaining channels provide buffering, offset correction, and output amplification. Internal compensation removes the need for an external compensation capacitor in conventional closed-loop use, simplifying the analog chain. The design must still account for input bias-current error at high sensor impedance and the output-swing limits at the selected supply voltage.

⚡

DC Gain and Reference Buffering

In DC gain-block and reference-buffer circuits, the LM324N/NOPB converts a low-level voltage into a larger, usable analog signal while maintaining a stable output reference. Its four internally compensated amplifiers can form cascaded gain stages, difference amplifiers, or unity-gain buffers without requiring an external compensation network. Because classic LM324-class outputs are not rail-to-rail, leave the necessary headroom to the positive and negative rails. Feedback-component values should also be kept close to the amplifier to minimize parasitic feedback and improve transient behavior.

🏭

Industrial Sensor Interface

The LM324N/NOPB is applicable to industrial sensor interfaces that combine sensing, scaling, and buffering in one analog subsystem. Its single-supply architecture simplifies grounding, while four independent channels allow simultaneous conditioning of multiple inputs or a combination of sensing, filtering, and output-driver stages. The wide single-supply operating concept supports industrial designs, but the exact supply limits must be checked against the LM324-N datasheet. Input protection, common-mode range, output loading, and isolation from switching nodes require separate engineering review.

🎧

Active Audio and Control Filtering

The LM324N/NOPB can implement active low-pass, high-pass, and band-pass sections where the required bandwidth does not demand a high-speed amplifier. Internal frequency compensation makes each channel convenient to use as a conventional closed-loop filter stage, while the four-channel package reduces the component count in multistage audio and control filters. Component tolerances determine the filter accuracy, and the non-rail-to-rail output can limit signal swing in low-voltage systems. Confirm stability with the intended source impedance and capacitive load before releasing the layout.

🔧

General-Purpose Instrumentation

The LM324N/NOPB is well suited to general instrumentation where inexpensive, independent analog channels are needed for amplification, buffering, and level shifting within the common-mode limits. Its internally compensated high-gain architecture supports conventional amplifier configurations without external frequency-compensation components. In test and measurement equipment, bypass capacitors and grounded guard techniques help control noise, while careful feedback routing limits susceptibility to parasitic oscillation. The DIP package makes hand assembly and socket-based prototyping convenient.

🔌

Power Supply Monitoring and Control Loops

The LM324N/NOPB can supervise a power rail, amplify a feedback-error voltage, and drive a slow control signal in low-bandwidth regulation or monitoring loops. Four amplifiers permit separate sensing, error amplification, filtering, and actuator-driving functions. The device’s low-power general-purpose architecture is useful where switching noise and high bandwidth are not central requirements. Designers must verify that the monitored signal remains inside the input common-mode range and that the output can reach the required control level with the chosen load.

What is the LM324N/NOPB?
The LM324N/NOPB is a low-power quad operational amplifier from Texas Instruments, combining four independent, high-gain, internally frequency-compensated amplifiers in a 14-pin PDIP package. According to the TI LM324-N product page, it is intended for transducer amplifiers, DC gain blocks, and conventional op-amp circuits. Its single-supply operation and four-channel organization make it a common choice for general-purpose analog signal conditioning, buffering, and gain-stage designs.
Where can I download the LM324N/NOPB datasheet PDF?
The official LM324-N datasheet and technical information are available from the Texas Instruments product page at https://www.ti.com/product/LM324-N. The manufacturer page provides the data sheet, device documentation, and product resources for the LM324-N family represented by the LM324N/NOPB orderable part. Use the pin-description table, recommended operating conditions, and typical-performance curves from that document when assigning board functions.
What is the LM324N/NOPB pinout?
The LM324N/NOPB uses the standard 14-pin quad operational-amplifier assignment: amplifier 1 uses pins 1 through 3, amplifier 2 uses pins 5 through 7, amplifier 3 uses pins 9 and 10, amplifier 4 uses pins 12 through 14, and ground is assigned to pins 4 and 11. Outputs are pins 1, 7, 8, and 14, while the remaining inputs alternate between inverting and non-inverting assignments. Confirm the exact pin descriptions in the manufacturer datasheet before routing the PCB.
What is the difference between LM324 and LM324N?
LM324N denotes the standard package and orderable configuration of the broader LM324 quad operational-amplifier family, while LM324 is the family designation. For the LM324N/NOPB, the verified package description is 14-PDIP with four amplifier circuits. Package suffix differences can indicate a different temperature grade, lead finish, or ordering code, so confirm those details against the specific manufacturer ordering information before treating a differently suffixed part as interchangeable.
What are the key specifications of LM324N/NOPB that engineers should know?
The principal identifiers for the LM324N/NOPB are four independent amplifier circuits, internal frequency compensation, single-supply operation, a low-power design, and a 14-PDIP package. Texas Instruments describes the device as suitable for transducer amplifiers, DC gain blocks, and conventional op-amp circuits. Exact supply-voltage limits, gain bandwidth, input bias current, output swing, and temperature ratings should be taken from the LM324-N manufacturer datasheet for the exact ordering code.
Can the LM324N/NOPB be powered from a single supply?
Yes, the LM324N/NOPB is specifically designed to operate from a single power supply. This arrangement simplifies sensor interfaces because the signal can be referenced to the same ground as the amplifier output. The exact supply limits and input common-mode range remain important: input and output voltage excursions must stay within the operating region specified in the TI LM324-N datasheet for the chosen gain, load, and temperature.
What can replace the LM324N/NOPB?
A suitable replacement must use the same 14-pin through-hole footprint, preserve the four-channel pin assignment, and provide comparable electrical performance. The LM324AN/NOPB is identified in a cross-reference comparison as functionally equivalent in most designs, while the STMicroelectronics LM324N and onsemi LM324N appear as same-package quad operational-amplifier candidates. Confirm the manufacturer’s pin-description table and application limits before substituting any part into an existing board.
Is the STMicroelectronics LM324N a drop-in replacement for LM324N/NOPB?
The STMicroelectronics LM324N is a strong drop-in candidate because it is identified as a four-circuit, 14-DIP general-purpose operational amplifier, matching the LM324N/NOPB’s channel count and through-hole format. It remains a different manufacturer’s implementation, so check supply limits, common-mode range, output-current behavior, offset, noise, and stability against the original design. The ST product page and datasheet should be reviewed before a production substitution.
When should I choose LM324N/NOPB instead of a rail-to-rail operational amplifier?
Choose the LM324N/NOPB when the circuit operates from a single supply and the signal remains within the classic LM324 input and output ranges. A rail-to-rail amplifier is preferable when the input or output must approach the supply rails more closely, or when lower offset, bias current, or noise is required. The decision should be based on the required signal swing, source impedance, load, bandwidth, and supply voltage rather than package naming alone.
Is LM324N/NOPB suitable for transducer and sensor interfaces?
Yes, TI identifies transducer amplification as a primary application for the LM324-N family. The four independent channels can be used for sensor excitation, differential sensing, buffering, gain correction, and analog output stages in a single instrument. High-impedance sources deserve particular attention because input bias current creates a voltage error, while low-impedance loads can constrain the achievable output swing. Use the datasheet’s input bias-current and output-drive curves to validate the operating point.
Where can I buy LM324N/NOPB and what is the price?
The LM324N/NOPB can be requested for quotation through the Request a Quote form on this page. Submit the exact MPN LM324N/NOPB, the required quantity, and your delivery country or region so the order can be matched to the correct Texas Instruments ordering code. Pricing and availability should be confirmed through that form because catalog pricing changes and differs with volume, packaging, and market conditions.
What is the lead time for LM324N/NOPB?
Use the Request a Quote form on this page to request the current lead time and minimum order quantity for LM324N/NOPB. Include your required quantity, target date, and shipping destination in the request. Because lead time and availability can change with inventory and regional demand, a dated quotation provides a more reliable planning figure than a generic catalog statement.
Is LM324N/NOPB in stock?
Current inventory for LM324N/NOPB should be confirmed through the Request a Quote form on this page. Provide the required quantity and destination, and the order can be checked against current channel availability and production scheduling. The part is identified by Texas Instruments as an active LM324-N family option, but that family status alone does not guarantee stock for every quantity or package suffix.
How should I design the power bypassing for LM324N/NOPB?
Place the supply bypass capacitor close to the device power pins and route it using a short, low-inductance path. The LM324N/NOPB contains four amplifiers sharing one supply, so supply-disturbance rejection can limit the performance of several channels simultaneously. Keep the ground return short and follow the layout and decoupling recommendations in the TI LM324-N datasheet, especially when driving capacitive or switching loads.
What are the LM324N/NOPB uses and circuit applications?
The LM324N/NOPB supports transducer-amplifier front ends, DC gain blocks, buffers, active filters, sensor interfaces, and conventional general-purpose op-amp circuits. Its four independent amplifiers allow several analog functions to share one package while retaining separate inputs and outputs. Because the output stage is not rail-to-rail, headroom planning is required on both the input common-mode range and output swing when designing around single-supply operation.

Impormasyon ng Talumpati sa Engineering for LM324N/NOPB — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose the LM324N/NOPB when a design needs four general-purpose, internally compensated amplifiers in a standard 14-pin PDIP footprint and operates from a single supply. It is particularly suitable for sensor conditioning, DC gain blocks, buffering, and low-bandwidth active filters where classic LM324 behavior and simple external connections are desired. Select the Texas Instruments LM324AN/NOPB when an equivalent ordering configuration from the same manufacturer is preferable, or LM324AN and LM324AP when the required suffix and package match your purchasing or assembly process.

Choose the STMicroelectronics LM324N or onsemi LM324N when sourcing a second manufacturer is advantageous, but review input bias current, offset, common-mode range, output drive, bandwidth, and stability against the original circuit. Do not choose a rail-to-rail amplifier merely to obtain the same DIP footprint; use one when the signal must operate closer to the supply rails, lower offset or bias current is essential, or higher bandwidth is required.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto LM324AN/NOPB LM324AN LM324AP LM324N LM324N
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments STMicroelectronics onsemi
Package 14-PDIP 14-PDIP - same 14-PDIP - same 14-PDIP - same 14-DIP - same 14-DIP - same
Number of Amplifiers 4 circuits 4 circuits 4 circuits 4 circuits 4 circuits 4 circuits
Supply Configuration Single power supply Single power supply Single power supply Single power supply Single power supply Single power supply
Compensation Internal Internal Internal Internal Internal Internal
Mounting Style Through-hole PDIP Through-hole PDIP Through-hole PDIP Through-hole PDIP Through-hole DIP Through-hole DIP

Pangunahing mga Pagkakaiba

  • Four independent amplifier channels in one 14-pin PDIP package (kumpara saLM2902KNSR)
  • Single-supply general-purpose operation with internal compensation (kumpara saLM324N)
  • Exact Texas Instruments ordering configuration (kumpara saLM324N)

Talaan ng Disenyo

Place the supply bypass capacitor immediately adjacent to the LM324N/NOPB supply and ground connections, and keep the current loop compact. Because all four amplifiers share the same supply pins, supply noise can affect every channel. Route sensitive signals away from switching-node copper and high-current return paths. Use separate local decoupling where multiple analog stages are distributed across the board.

Do not assume that the outputs can reach either supply rail. The classic LM324-class output stage requires output headroom, and the inputs also have common-mode restrictions under single-supply operation. Check the output load, gain, and signal level against the LM324-N recommended operating conditions. Using a rail-to-rail amplifier is preferable when the required input or output voltage approaches the supply limits.

Keep feedback resistors and their signal paths close to the relevant amplifier pins, and avoid routing inputs beneath noisy analog or digital traces. High-impedance inputs should use guarded or driven-shield techniques where offset drift from bias current is significant. For the PDIP footprint, maintain adequate clearance from conductive hardware and confirm that the selected socket and board layout accommodate the pin-1 orientation.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

The LM324-N is a general-purpose amplifier rather than an automotive-qualified device, so AEC-Q100 is not applicable. RoHS, REACH, lead-free, halogen-free, and conflict-minerals statements should be confirmed from the current TI product documentation or declaration for the exact ordering code.

Data napatotohanan sa: 2026-11-17 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

lm324n nopb difference between lm324 and lm324n difference between lm324 and lm339 lm324n pinout lm324n datasheet lm324n op amp lm324n uses lm324n diagram lm324n ic circuit diagram lm324n pin diagram lm324n datasheet pdf LM324N/NOPB equivalent LM324N/NOPB replacement LM324N/NOPB Texas Instruments

Mga kaugnay na Mga Komponente at mga Tuntunin

Texas Instruments LM324N/NOPB LM324-N LM324AN/NOPB LM324AN LM324AP STMicroelectronics LM324N onsemi LM324N operational amplifier quad operational amplifier general-purpose amplifier single-supply operation frequency compensation closed-loop amplifier transducer amplifier DC gain block signal conditioning active filter input common-mode range output swing input bias current 14-pin PDIP DIP-14 through-hole package
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ